Volume 2: Emissions Control Systems; Instrumentation, Controls, and Hybrids; Numerical Simulation; Engine Design and Mechanical Development最新文献

{"title":"Numerical Investigation of Fuel Effects on Soot Emissions at Heavy-Duty Diesel Engine Conditions","authors":"Meng Tang, Y. Pei, Yu Zhang, M. Traver, David Cleary, Zhaoyu Luo, J. Naber, Seong-Young Lee","doi":"10.1115/ICEF2018-9696","DOIUrl":"https://doi.org/10.1115/ICEF2018-9696","url":null,"abstract":"Gasoline compression ignition (GCI) engine technology has shown the potential to achieve high fuel efficiency with low criteria pollutant emissions. In order to guide the design and optimization of GCI combustion, it is essential to develop high-fidelity simulation tools. Building on the previous work in computational fluid dynamic (CFD) simulations of spray combustion, this work focuses on predicting the soot emissions in a constant-volume vessel representative of heavy-duty diesel engine applications for an ultra-low sulfur diesel (ULSD) and a high reactivity (Research Octane Number 60) gasoline, and comparing the soot evolution characteristics of the two fuels. Simulations were conducted using both Reynolds Averaged Navier-Stokes (RANS) and Large Eddy Simulation (LES) turbulence models. Extensive model validations were performed against the experimental soot emissions data for both fuels. It was found that the simulation results using the LES turbulence model agreed better with the measured ignition delays and liftoff lengths than the RANS turbulence model. In addition, two soot models were evaluated in the current study, including an empirical two-step soot formation and oxidation model, and a detailed soot model that involves poly-aromatic hydrocarbon (PAH) chemistry. Validations showed that the separation of the flame lift-off location and the soot lift-off location and the relative natural luminosity signals were better predicted by the detailed soot model combined with the LES turbulence model. Qualitative comparisons of simulated local soot concentration distributions against experimental measurements in the literature confirmed the model’s performance. CFD simulations showed that the transition of domination from soot formation to soot oxidation was fuel-dependent, and the two fuels exhibited different temporal and spatial characteristics of soot emissions. CFD simulations also confirmed the lower sooting propensity of gasoline compared to ULSD under all investigated conditions.","PeriodicalId":448421,"journal":{"name":"Volume 2: Emissions Control Systems; Instrumentation, Controls, and Hybrids; Numerical Simulation; Engine Design and Mechanical Development","volume":"2 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2018-11-04","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"134193460","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Analysis of Different Uniflow Scavenging Options for a Medium-Duty 2-Stroke Engine for a U.S. Light-Truck Application","authors":"J. Turner, R. Head, R. Wijetunge, Junseok Chang, D. Blundell, P. Burke","doi":"10.1115/ICEF2018-9766","DOIUrl":"https://doi.org/10.1115/ICEF2018-9766","url":null,"abstract":"The work presented here seeks to compare different means of providing uniflow scavenging for a 2-stroke engine suitable to power a US light-duty truck. Through the ‘end-to-end’ nature of the uniflow scavenging process, it can in theory provide improved gas-exchange characteristics for such an engine operating cycle; furthermore, because the exhaust leaves at one end and the fresh charge enters at the other, the full circumference of the cylinder can be used for the ports for each flow and therefore, for a given gas exchange angle-area demand, expansion can theoretically be maximized over more traditional loop-scavenging approaches. This gives a further thermodynamic advantage.\u0000 The three different configurations studied which could utilize uniflow scavenging were the opposed piston, the poppetvalve with piston-controlled intake ports and the sleeve valve. These are described and all are compared in terms of indicated fuel consumption for the same cylinder swept volume, compression ratio and exhaust pressure, for the same target indicated mean effective pressure and indicated specific power.\u0000 A new methodology for optimization was developed using a one-dimensional engine simulation package which also took into account charging system work. The charging system was assumed to be a combination of supercharger and turbocharger to permit some waste energy recovery.\u0000 As a result of this work it was found that the opposed-piston configuration provides the best attributes since it allows maximum expansion and minimum heat transfer. Its advantage over the other two (whose results were very close) was of the order of 8.3% in terms of NSFC (defined as ISFC net of supercharger power). Part of its advantage also stems from its requirement for minimum air supply system work, included in this NSFC value.\u0000 Interestingly, it was found that existing experiential guidelines for port angle-area specification for loop-scavenged, piston-ported engines using crankcase compression could also be applied to all of the other scavenging types. This has not been demonstrated before. The optimization process that was subsequently developed allowed port design to be tailored to specific targets, in this case lowest NSFC. The paper therefore presents a fundamental comparison of scavenging systems using a new approach, providing new insights and information which have not been shown before.","PeriodicalId":448421,"journal":{"name":"Volume 2: Emissions Control Systems; Instrumentation, Controls, and Hybrids; Numerical Simulation; Engine Design and Mechanical Development","volume":"1 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2018-11-04","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"129805633","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Direct Simultaneous Measurement of Particulate Matter and Ammonia Storage on Combined Selective Catalytic Reduction Filter Systems Using Radio Frequency Sensors","authors":"P. Ragaller, A. Sappok, Jie Qiao, Xiaojin Liu, J. Aguilar","doi":"10.1115/ICEF2018-9528","DOIUrl":"https://doi.org/10.1115/ICEF2018-9528","url":null,"abstract":"Tightening global emissions regulations are motivating interest in the development and implementation of Selective Catalytic Reduction + Filtration (SCRF) systems, which are designed to reduce the concentration of tailpipe particulate matter (PM) and NOx emissions. These systems allow designers to combine the NOx reduction capability of an SCR with the filtration capability of a particulate filter on a single unit. Practical implementation of these systems requires reliable measurement and diagnosis of their state — both with respect to trapped particulate matter as well as adsorbed ammonia. Currently, these systems rely on a variety of gas sensors, mounted upstream or downstream of the system, that only provide an indirect inference of the operation state.\u0000 In this study, a single radio frequency (RF) sensor was used to perform simultaneous measurements of soot loading and ammonia inventory on an SCRF. Several SCRF core samples were tested at varying soot and ash loads in a catalyst reactor bench. Soot levels were measured by monitoring changes in the bulk dielectric properties within the catalyst using the sensor, while ammonia levels were determined by feeding selected regions of the RF spectrum into a pretrained generalized regression neural network model. Results show the RF sensor is able to directly measure the instantaneous ammonia inventory, while simultaneously providing soot loading measurements within 0.5 g/L. These results confirm that simultaneous measurements of both the PM and ammonia loading state of an SCRF are possible using a single RF sensor via analysis of specific features in the full RF spectrum. The results indicate significant potential to remove the control barriers typically associated with the implementation of advanced SCRF systems.","PeriodicalId":448421,"journal":{"name":"Volume 2: Emissions Control Systems; Instrumentation, Controls, and Hybrids; Numerical Simulation; Engine Design and Mechanical Development","volume":"3 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2018-11-04","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"134225116","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Numerical Evaluation of the Effects of Low Pressure EGR Mixer Configuration on Turbocharger Compressor Performance","authors":"A. Reihani, J. Hoard, Stefan Klinkert, C. Kuan, D. Styles","doi":"10.1115/ICEF2018-9686","DOIUrl":"https://doi.org/10.1115/ICEF2018-9686","url":null,"abstract":"Low-pressure exhaust gas recirculation (LP-EGR) is an EGR configuration in which clean exhaust gas is taken downstream of the turbine and aftertreatment, and then reintroduced upstream of the compressor (1). Employing LP-EGR on Diesel engines can improve fuel economy by reducing pumping losses, lowering intake manifold temperature and facilitating advanced combustion phasing (2, 3). The LP-EGR can also improve compressor and turbine performance by moving their operating points towards higher flow rate and higher efficiency points, which is reflected as a net reduction in pumping losses of the engine. In this study, we focus on effects of introducing LP-EGR on the compressor pressure ratio, and isentropic total-to-total efficiency.\u0000 The flow field of LP-EGR and air mixing upstream of the compressor as well as the entire compressor stage were studied using a CFD RANS model. The model was validated against turbocharger gas stand measurements. A T-junction mixer was chosen as the design baseline, and various configurations of this mixer were evaluated. The impact of the geometric configuration of the mixer was studied by varying mixing length, EGR jet introduction angle, and EGR-to-air cross section area ratio over a wide range of relevant engine operating conditions.\u0000 The flow field upstream of the compressor is strongly affected by the dimensionless quantity EGR-to-air momentum ratio. At intermediate momentum ratios, stream-wise counter-rotating vortex pairs (4) are induced in the flow. These vortices can reach the impeller inlet, and depending on vorticity and length scale, perturb the local velocity triangle. At low and high momentum ratios, creeping or impinging jets respectively are formed. In addition prewhirl can be induced by eccentric introduction of EGR. The EGR-induced prewhirl acts similar to an inlet guide vane and can alter the incidence angle at the impeller inlet.\u0000 The performance of the compressor is altered by the EGR-induced flow field. Compressor pressure ratio is either increased or decreased depending on the direction of EGR-induced prewhirl with eccentric EGR introduction. The compressor efficiency decreases at low flow rates by introduction of concentric EGR due to perturbation of the velocity triangle at the impeller inlet. On the other hand, at low flow rates compressor efficiency can be improved by eccentric EGR introduction, which generates prewhirl in the direction of rotation of the impeller leading to improved incidence angle. The extent to which the compressor is influenced by the EGR-induced flow field is generally reduced by increasing the EGR mixing length, due to viscous damping and breakdown of large-scale EGR-induced vortices.\u0000 The LP-EGR configuration provides a potential pathway towards improvement of compressor performance, not only by increasing compressor flow rate, but also by manipulation of the flow field. Given that the engine pumping losses are strongly dependent on compressor performance, specifically","PeriodicalId":448421,"journal":{"name":"Volume 2: Emissions Control Systems; Instrumentation, Controls, and Hybrids; Numerical Simulation; Engine Design and Mechanical Development","volume":"33 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2018-11-04","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"124895989","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Coordinated Control Strategy in Engine Starting Process for a Novel Compound Power-Split Hybrid Electric Vehicle","authors":"D. Shen, C. Gühmann, Tong Zhang, Xizhen Dong","doi":"10.1115/ICEF2018-9651","DOIUrl":"https://doi.org/10.1115/ICEF2018-9651","url":null,"abstract":"Due to the direct connection between the engine and the compound power split hybrid transmission (CPSHT) in hybrid electric vehicle (HEV), engine ripple torque (ERT) can result in obvious jerks in engine starting process (ESP). In order to improve the riding comfort, two wet clutches are mounted in this novel CPSHT. This research developed a new coordinated control strategy and its effectiveness was verified in simulation. Firstly, the mechanical and hydraulic parts of the CPSHT were introduced, and the riding comfort problem during ESP in primary design was illustrated. Secondly, the dynamic plant model including ERT, driveline model and clutch torque was deduced. Thirdly, a coordinated control strategy was designed to determine the target engine torque, motor torque, clutch torque and the moment of fuel injection. A Kalman filter based clutch torque estimator was applied with the help of electric motors information. The simulation result indicates that proposed coordinated control strategy can indeed suppress vehicle jerk and improve the riding comfort in ESP.","PeriodicalId":448421,"journal":{"name":"Volume 2: Emissions Control Systems; Instrumentation, Controls, and Hybrids; Numerical Simulation; Engine Design and Mechanical Development","volume":"47 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2018-11-04","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"125879188","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"A Comprehensive Ignition System Model for Spark Ignition Engines","authors":"Haiwen Ge, Peng Zhao","doi":"10.1115/ICEF2018-9574","DOIUrl":"https://doi.org/10.1115/ICEF2018-9574","url":null,"abstract":"In the present paper, a comprehensive ignition system model (VTF ignition model) accounting for the practical module and working mechanism of a spark plug was developed, aiming to provide enhanced capability for the 3D combustion simulation of spark ignition engines. In this model, an electrical circuitry model is used to represent the ignition coil, spark plug, and air column. The air column is represented by a set of Lagrangian particles that move with the local flow field. Flame propagation is directly calculated using SAGE model with a reduced isooctane reaction mechanism. The new ignition system model is further implemented into CONVERGE through user defined functions and is verified by comparing with the conventional DPIK model. It is found that the VTF ignition model predicts slower combustion than the DPIK model, mainly due to more realistic energy deposit method and energy discharging rate. Furthermore, the VTF model also has the capability of predicting the arc motion and restrike phenomena associated with spark ignition processes. It is expected that with more validation with experiments, the new VTF model has the great potential to better serve the needs of engine combustion simulation.","PeriodicalId":448421,"journal":{"name":"Volume 2: Emissions Control Systems; Instrumentation, Controls, and Hybrids; Numerical Simulation; Engine Design and Mechanical Development","volume":"16 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2018-11-04","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"130345939","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Numerical Analysis of the Combustion Process in Dual-Fuel Engines With Direct Injection of Natural Gas","authors":"M. Jud, C. Wieland, G. Fink, T. Sattelmayer","doi":"10.1115/ICEF2018-9579","DOIUrl":"https://doi.org/10.1115/ICEF2018-9579","url":null,"abstract":"An efficient computational fluid dynamics model for predicting high pressure dual-fuel combustion is one of the most essential steps in order to improve the concept, to reduce the number of experiments and to make the development process more coste-efficient. For Diesel and natural gas such a model developed by the authors is first used to analyze the combustion process with respect to turbulence chemistry interaction and to clarify the question whether the combustion process is limited by chemistry or the mixing process. On the basis of these findings a reduced reaction mechanism is developed in order to save up to 35% of computing time. The prediction capability of the modified combustion model is tested for different gas injection timings representing different degrees of premixing before ignition. Compared to experimental results from a rapid compression expansion machine, the shape of heat release rate, the ignition timing of the gas jet and the burnout are well predicted. Finally, misfiring observed at different geometric configurations in the experiment are analyzed with the model. It is identified that in these geometric configurations at low temperature levels the gas jet covers the preferred ignition region of the diesel jet. Since the model is based on the detailed chemistry approach, it can in future also be used for other fuel combinations or for predicting emissions.","PeriodicalId":448421,"journal":{"name":"Volume 2: Emissions Control Systems; Instrumentation, Controls, and Hybrids; Numerical Simulation; Engine Design and Mechanical Development","volume":"35 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2018-11-04","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"126443329","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Experimental Investigation of Soot Accumulation and Regeneration in a Catalyzed Gasoline Particulate Filter Utilizing Particulate Quantification and Gas Speciation Measurements","authors":"Dhruvang Rathod, S. Onori, Z. Filipi, Mark A. Hoffman","doi":"10.1115/ICEF2018-9627","DOIUrl":"https://doi.org/10.1115/ICEF2018-9627","url":null,"abstract":"Recent particulate regulations for gasoline passenger cars have prompted the utilization of Gasoline Particulate Filters (GPF’s) to mitigate particulate emissions. This study overviews a comprehensive experimental methodology for examination of essential GPF parameters: spatial exothermic temperature rise, particulate trapping efficiency, and the pressure rise versus particulate loading. A GDI vehicle equipped with a subfloor catalytically washcoated GPF downstream of the three-way catalyst was operated on a chassis dynamometer for data collection. Accelerated soot accumulation procedures were developed to expedite the testing while avoiding passive particulate regeneration based on both particulate concentration and size distributions. Soot concentrations pre and post GPF were used to measure the soot trapping efficiency and total soot accumulation. Fuel-cut coast events, common in real-world driving, were utilized to initiate worst case GPF regenerations, namely regenerations which produce maximum temperature rise due to the limited exhaust flow through the GPF. CO2 measurements simultaneously measured before and after the GPF were examined to calculate the quantity of soot burned during each regeneration event. Thermocouples located inside the GPF were implemented to obtain the spatially disparate, transient temperature traces and analyzed to obtain insights on the soot distribution inside the GPF. The maximum exothermic temperature rise within the GPF was tracked for different soot loadings and regeneration temperatures to ensure GPF substrate and catalytic washcoat health. Most initial soot loadings required multiple ‘fuel-cut coast’ regenerations for complete soot oxidation of all trapped particulate mass.\u0000 Additionally, externally supplied oxygen was utilized to obtain complete GPF regeneration in a single event. This purpose built system created O2 availability while maintaining constant GPF temperatures, similar to actively commanding lean A/F ratios during vehicle operation. Emissions measurements indicated that this system successfully regenerated all GPF soot. However, due to magnitude disparity between exhaust flow and total exothermic heat released, the thermocouples inside the GPF recorded only minimal exothermic temperature rises, providing confidence that lean active regeneration strategies pose little threat to GPF health.","PeriodicalId":448421,"journal":{"name":"Volume 2: Emissions Control Systems; Instrumentation, Controls, and Hybrids; Numerical Simulation; Engine Design and Mechanical Development","volume":"90 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2018-11-04","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"124403168","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Analysis of the Opportunities and Trade-Offs for an 48V Electrified Air Path","authors":"Yang Liu, R. Vijayakumar, R. Burke","doi":"10.1115/ICEF2018-9583","DOIUrl":"https://doi.org/10.1115/ICEF2018-9583","url":null,"abstract":"The electrification of powertrains is now the accepted roadmap for automotive vehicles. The next big step in this area will be the adoption of 48V systems, which will facilitate the use of technologies such as electric boosting and integrated startergenerators. The introduction of these technologies gives new opportunities for engine airpath design as an electrical energy source may now be used in addition to the conventional mechanical and exhaust thermal power used in super- and turbochargers. This work was conducted as part of the EU funded project “THOMSON” which aims to create a cost effective 48V system enabling engine downsizing, kinetic energy recovery, and emissions management to reduce the environmental impact of transportation. The paper presents a study on an electrified airpath for a 1.6L diesel engine. The aim of this study is to understand the design and control trade-offs which must be managed in such an electrified boosting system. A two-stage boosting system including an electric driven compressor (EDC) and a variable geometry turbocharger (VGT) is used. The air path also include low and high pressure EGR loops. The work was performed using a combination of 1D modelling and experiments conducted on a novel transient air path test facility.\u0000 The simulation results illustrate the trade-off between using electrical energy from in the EDC or thermal energy in the turbocharger to deliver the engine boost pressure. For a same engine boost target, the use of the EDC allows wider VGT opening which leads to lower engine backpressure (at most 0.4bar reduction in full load situation) and reduced pumping losses. However, electricity consumed in EDC either needs to be provided from the alternator (which increases the load on the engine) or by depleting the state of charge of the battery. The location of charge air coolers (pre- or post-EDC) is also investigated. This changes the EDC intake temperature by 100K and the intake manifold by 5K which subsequently impacts on engine breathing. An experimentally validated model of a water charge air cooler model has been developed for predicting flow temperature.","PeriodicalId":448421,"journal":{"name":"Volume 2: Emissions Control Systems; Instrumentation, Controls, and Hybrids; Numerical Simulation; Engine Design and Mechanical Development","volume":"43 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2018-11-04","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"128856717","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Numerical Investigation on LNG Injection in a SI-ICE","authors":"G. Pasini, S. Frigo, M. Antonelli, M. Berardi","doi":"10.1115/ICEF2018-9532","DOIUrl":"https://doi.org/10.1115/ICEF2018-9532","url":null,"abstract":"Since the beginning of this century, Liquefied Natural Gas (LNG) has been attracting more and more attention as a cleaner energy alternative to other fossil fuels, mainly due to the possibility to transport it over longer distances than natural gas in pipelines and lower environmental impact than other liquid fuels. It is expected that this trend in the use of LNG will lead to steady increases in demand over the next few decades.\u0000 At present, in the automotive sector, natural gas is employed as fuel in spark-ignited (SI) engines in the gas phase (CNG) adopting port-fuel injection system (PFI) in the intake manifold, with the main result of reducing CO2 emissions by up to 20%, compared with gasoline operation. However, SI engines which are operated in this manner suffer loss of peak torque and power due to a reduction in volumetric efficiency. Direct-Injection (DI) inside the cylinder can overcome this drawback by injecting CNG after intake valve closure. Another strategy could be the injection of natural gas in the liquid phase, both in PFI or DI mode. The injected fuel evaporation cools down the intake air; increasing the charge density with a substantial improvement in the engine volumetric efficiency and delivered power. However, at present, injection systems dedicated to cryogenic injection of natural gas are still in the prototype state.\u0000 In the present study, the volumetric efficiency and performance of a turbocharged, LNG fuelled SI-ICE were numerically analysed both in the cases of DI and PFI modes and compared with the results of a conventional CNG system. Various fuel injection timings and injector position were analysed. The engine performance was evaluated by means of a one-dimensional model developed with the simulation program GT-Power, while the verification of the LNG-air mixture characteristics was carried out with the commercial code Aspen HYSIS.\u0000 The numerical activity has shown that gaseous DI, before inlet valves closing, gives the worst result since methane, once injected into the cylinder, expands hindering the entry of air. On the other side, liquid PFI represents the best configuration to maximize the volumetric efficiency and therefore the engine power. All the technological issues related to a cryogenic liquid methane injection system were not taken into consideration in this study.","PeriodicalId":448421,"journal":{"name":"Volume 2: Emissions Control Systems; Instrumentation, Controls, and Hybrids; Numerical Simulation; Engine Design and Mechanical Development","volume":"67 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2018-11-04","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"126306904","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}