发布求助
文献互助 智能选刊 最新文献

Strojnícky časopis - Journal of Mechanical Engineering最新文献

筛选
英文 中文
Optimization of Drilling Parameters During Machining of Al-Mg-Si Alloys By Taguchi Method Coupled with Grey Relational Analysis and Validated By Fea Based Deform - 3D Taguchi法与灰色关联分析相结合的Al-Mg-Si合金加工钻孔参数优化及基于Fea的Deform - 3D验证
Strojnícky časopis - Journal of Mechanical Engineering Pub Date : 2021-11-01 DOI: 10.2478/scjme-2021-0032
R. Sreenivasulu, C. Srinivasarao
{"title":"Optimization of Drilling Parameters During Machining of Al-Mg-Si Alloys By Taguchi Method Coupled with Grey Relational Analysis and Validated By Fea Based Deform - 3D","authors":"R. Sreenivasulu, C. Srinivasarao","doi":"10.2478/scjme-2021-0032","DOIUrl":"https://doi.org/10.2478/scjme-2021-0032","url":null,"abstract":"Abstract In the present work to validate the experimental results as per Taguchi based grey relational analysis by considering L27 orthogonal array corresponding to five factors with three levels and obtained optimal combination of input parameters to minimize the output responses during drilling process which is most important finishing operation required in the structural assembly works where we found application of Al-Mg-Si alloys, Deform-3D software is implemented and found good feasibility with that of experimental results.","PeriodicalId":445896,"journal":{"name":"Strojnícky časopis - Journal of Mechanical Engineering","volume":"8 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2021-11-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"126643213","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 6
Approximate Calculation of the Natural Oscillation Frequency of the Vibrating Table in Inter-Resonance Operation Mode 互共振工作模式下振动台固有振动频率的近似计算
Strojnícky časopis - Journal of Mechanical Engineering Pub Date : 2021-11-01 DOI: 10.2478/scjme-2021-0026
Maistruk Pavlo, Lanets Oleksii, Stupnytskyy Vadym
{"title":"Approximate Calculation of the Natural Oscillation Frequency of the Vibrating Table in Inter-Resonance Operation Mode","authors":"Maistruk Pavlo, Lanets Oleksii, Stupnytskyy Vadym","doi":"10.2478/scjme-2021-0026","DOIUrl":"https://doi.org/10.2478/scjme-2021-0026","url":null,"abstract":"Abstract The first natural frequency of oscillations of the vibrations of a discrete-continuous interresonant vibrating table plate was found using the functions of the Krylov-Duncan. The continuous member, presented in a plate hinged at four points, is used as a reactive mass with distributed parameters to create an inter-resonance vibrating table with an electromagnetic drive. For this purpose, the plate was considered as a rod on hinged supports. The justification of this approach is confirmed by simulation in the Ansys software. The results were confirmed using the approximate Rayleigh-Ritz method. The geometric shape of the plate is reduced to a section of a hyperboloidal surface. The results of simulation of the first natural frequency were verified experimentally.","PeriodicalId":445896,"journal":{"name":"Strojnícky časopis - Journal of Mechanical Engineering","volume":"76 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2021-11-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"130712589","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 4
Effect of Selected Components on Combustion of Methane 选定组分对甲烷燃烧的影响
Strojnícky časopis - Journal of Mechanical Engineering Pub Date : 2021-11-01 DOI: 10.2478/scjme-2021-0018
Chríbik Andrej, Minárik Matej, Polóni Marián
{"title":"Effect of Selected Components on Combustion of Methane","authors":"Chríbik Andrej, Minárik Matej, Polóni Marián","doi":"10.2478/scjme-2021-0018","DOIUrl":"https://doi.org/10.2478/scjme-2021-0018","url":null,"abstract":"Abstract Article discusses the effect of various gases on the combustion of methane in LGW 702 combustion engine intended for use in cogeneration unit. The measured results were evaluated for internal, performance and economic parameters of the combustion engine the ideal operating parameters can be set. The aim of the study was to assess the effect of combustible carbon monoxide and carbon dioxide and nitrogen on the parameters.","PeriodicalId":445896,"journal":{"name":"Strojnícky časopis - Journal of Mechanical Engineering","volume":"16 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2021-11-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"126821722","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 3
A Design Optimization Study for the Die Dimensioning Using the Locking Nut Folding Simulation 基于锁紧螺母折叠模拟的模具尺寸优化设计研究
Strojnícky časopis - Journal of Mechanical Engineering Pub Date : 2021-11-01 DOI: 10.2478/scjme-2021-0016
Bozkurt Ülüver, Kacar İlyas
{"title":"A Design Optimization Study for the Die Dimensioning Using the Locking Nut Folding Simulation","authors":"Bozkurt Ülüver, Kacar İlyas","doi":"10.2478/scjme-2021-0016","DOIUrl":"https://doi.org/10.2478/scjme-2021-0016","url":null,"abstract":"Abstract An inverse analysis based on optimization process is performed to determine die curvatures for a locking nut’s flange folding process which has highly nonlinear material behaviour. The nut material is AISI C1040 steel. The ring material is polyamide 6. The Chaboche’s nonlinear kinematic hardening rule is combined with bilinear isotropic hardening model as a hardening rule for the plasticity model combined with associated flow rule and von Mises yield criterion. The inverse analysis is applied to determine the curvatures by using genetic algorithm optimization method based on dimensional accuracy. The optimum mould curvatures are determined. So a comprehensive methodology is presented for determination of curvatures.","PeriodicalId":445896,"journal":{"name":"Strojnícky časopis - Journal of Mechanical Engineering","volume":"2 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2021-11-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"127481401","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 0
Determination of Bearing Quality Using Frequency Vibration Analysis 用频率振动分析法测定轴承质量
Strojnícky časopis - Journal of Mechanical Engineering Pub Date : 2021-11-01 DOI: 10.2478/scjme-2021-0040
Žiaran Stanislav, Chlebo Ondrej, Šooš Ľubomír
{"title":"Determination of Bearing Quality Using Frequency Vibration Analysis","authors":"Žiaran Stanislav, Chlebo Ondrej, Šooš Ľubomír","doi":"10.2478/scjme-2021-0040","DOIUrl":"https://doi.org/10.2478/scjme-2021-0040","url":null,"abstract":"Abstract The paper proposes two methods for determining the quality of industrially manufactured bearings, where the vibro-acoustic energy is expressed by measuring the vibration acceleration. The determined criteria were verified and 100 % agreement was reached in determining the required quality of the bearings. Unwanted bearing noise emissions and its faults can be monitored over the maximum acceleration value determined from the time history, the frequency distribution and the r.m.s. value of the determined frequency range.","PeriodicalId":445896,"journal":{"name":"Strojnícky časopis - Journal of Mechanical Engineering","volume":"164 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2021-11-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"121082040","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 5
Gas Turbine Aerodynamics Improvement Via a Design of Intelligent Fractional Control 基于智能分式控制设计的燃气轮机空气动力学改进
Strojnícky časopis - Journal of Mechanical Engineering Pub Date : 2021-11-01 DOI: 10.2478/scjme-2021-0020
Debbah Abdesselam, Kherfane Hamid, Kelaiaia Ridha
{"title":"Gas Turbine Aerodynamics Improvement Via a Design of Intelligent Fractional Control","authors":"Debbah Abdesselam, Kherfane Hamid, Kelaiaia Ridha","doi":"10.2478/scjme-2021-0020","DOIUrl":"https://doi.org/10.2478/scjme-2021-0020","url":null,"abstract":"Abstract Gas turbines are complex processes characterized by the instability and uncertainty of various sources. The range of useful operating in an axial compressor which is part of a turbine gas is limited by aerodynamic instabilities that are surge and rotating stall. This paper presents two intelligent fractional order sliding mode controllers. At first, a robust sliding fractional surface form is proposed to deal with hazardous phenomena which limit compression systems performance, and speed transitions, which can lead to temporary stall development, pressure drop at the output, degrade the effective operation of compressors and consequently gas turbines. Second, to reduce the chattering/fluctuation in control, a fuzzy logic and finite time criterion are used as switching control at the reaching phase in the sliding mode control. Additionally, the controller gains are obtained by offline multi-objective Particle swarm optimization (MOPSO) search. Finally, the surge and rotating stall of a Variable Speed Axial Compressor (VSAC) in a gas turbine are investigated under the system nonlinearities and also in presence of an external disturbance and perturbations. The simulation results signify the performance of the two MOPSO-based fractional sliding mode controllers.","PeriodicalId":445896,"journal":{"name":"Strojnícky časopis - Journal of Mechanical Engineering","volume":"81 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2021-11-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"125661806","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 3
Influencing Geometrical Parameters of Tools in Friction Stirring Technology: A Short Review 摩擦搅拌工艺中刀具几何参数的影响
Strojnícky časopis - Journal of Mechanical Engineering Pub Date : 2021-11-01 DOI: 10.2478/scjme-2021-0034
Sanjay Sharma, A. Handa, Sahibpreet Singh
{"title":"Influencing Geometrical Parameters of Tools in Friction Stirring Technology: A Short Review","authors":"Sanjay Sharma, A. Handa, Sahibpreet Singh","doi":"10.2478/scjme-2021-0034","DOIUrl":"https://doi.org/10.2478/scjme-2021-0034","url":null,"abstract":"Abstract Friction stirring based “Green” processes are ruled by geometrical and process aspects of the tools used for generating desired properties in the processed materials. Considering only geometrical aspects, the developments in tool geometry, its modifications with the time, profiles and their corresponding impacts on the property generation are addressed in the present work. It is a censorious and judicious review which consolidates the relevant information apropos of all geometrical aspects of tools and their roles in property generation.","PeriodicalId":445896,"journal":{"name":"Strojnícky časopis - Journal of Mechanical Engineering","volume":"93 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2021-11-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"127854005","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 3
Effect of Carbonitriding on Tribomechanical and Corrosion-Resistant Properties of Friction Stir Welded Aluminium 2024 Alloy 碳氮共渗对搅拌摩擦焊接铝合金摩擦力学和耐腐蚀性能的影响
Strojnícky časopis - Journal of Mechanical Engineering Pub Date : 2021-11-01 DOI: 10.2478/scjme-2021-0030
Priya, G. M. Kumar, P. Kumar
{"title":"Effect of Carbonitriding on Tribomechanical and Corrosion-Resistant Properties of Friction Stir Welded Aluminium 2024 Alloy","authors":"Priya, G. M. Kumar, P. Kumar","doi":"10.2478/scjme-2021-0030","DOIUrl":"https://doi.org/10.2478/scjme-2021-0030","url":null,"abstract":"Abstract Friction stir welding (FSW) is extensively used to join aluminium alloys components in space and aircraft industries. Al 2024 is a heat-treatable aluminium alloy with copper as the primary alloying element which has good strength and fatigue resistance. This paper investigates the effect of carbonitriding surface modification on the hardness, tensile strength and impact strength of FSW welded Al 2024 joints. The friction stir welding was performed on three different sets of aluminium alloy (Al2024:Al2024, Al2024: carbonitrided-Al2024, carbonitrided-Al2024: carbonitrided-Al2024) at two different tool rotation speed (TRS) and two welding speed using cylindrical pin tool. The carbonitriding pre-treatment of Al-2024 alloy demonstrated significant improvement in the tensile strength, percentage elongation, abrasion wear resistance and corrosion resistance with the sacrifice of impact strength. The maximum tensile strength of all three sets of samples after FSW was recorded in descending order of (i) carbonitrided-Al2024:carbonitrided-Al2024 (ii) Al2024:Carbonitrided-Al2024 and (iii) Al2024:Al2024. The friction stir welded joint of carbonitrided aluminium alloy exhibited best abrasive wear resistant and corrosion resistant properties.","PeriodicalId":445896,"journal":{"name":"Strojnícky časopis - Journal of Mechanical Engineering","volume":"71 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2021-11-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"131291685","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 0
The Mathematical Analysis of Demands for Railway Passenger Transport in Kosovo 科索沃铁路客运需求的数学分析
Strojnícky časopis - Journal of Mechanical Engineering Pub Date : 2021-11-01 DOI: 10.2478/scjme-2021-0029
Mazrekaj Ramadan, Shala Ahmet
{"title":"The Mathematical Analysis of Demands for Railway Passenger Transport in Kosovo","authors":"Mazrekaj Ramadan, Shala Ahmet","doi":"10.2478/scjme-2021-0029","DOIUrl":"https://doi.org/10.2478/scjme-2021-0029","url":null,"abstract":"Abstract The purpose of this paper is to analyse the railway transport of passengers in Kosovo, to determine its intensity and structure, to analyse which factors have the greatest impact on the demand for regular rail transport. Furthermore, the paper will examine which trend, which model fits best in moving this mode of transport based on data from 2011 to 2019, and then predict future trends in transport demand. The existence and strength of the dependence among the selected factors, which are assumed to have an impact on passenger rail transport will be examined by the mathematical method of regression analysis.","PeriodicalId":445896,"journal":{"name":"Strojnícky časopis - Journal of Mechanical Engineering","volume":"5 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2021-11-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"132427826","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 0
Correction Factors for Determining the Mass Transfer Coefficients 确定传质系数的修正系数
Strojnícky časopis - Journal of Mechanical Engineering Pub Date : 2021-11-01 DOI: 10.2478/scjme-2021-0022
Gužela Štefan, Dzianik František
{"title":"Correction Factors for Determining the Mass Transfer Coefficients","authors":"Gužela Štefan, Dzianik František","doi":"10.2478/scjme-2021-0022","DOIUrl":"https://doi.org/10.2478/scjme-2021-0022","url":null,"abstract":"Abstract A number of industrial operations are linked to mass transfer. The mass transfer coefficient value is necessary to know when designing the industrial equipment in which mass transfer occurs. There are various mass transfer coefficients, as well as equations for their calculation. However, the value of these coefficients determined according to these equations often has to be corrected for the given conditions. The aim of the article is to state the conversion relations - the correction factors enabling the calculation of the mass transfer coefficients values corresponding to the given conditions.","PeriodicalId":445896,"journal":{"name":"Strojnícky časopis - Journal of Mechanical Engineering","volume":"11 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2021-11-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"133960620","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 4
首页 上一页
0
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
提示
您的信息不完整，为了账户安全，请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
现在去查看 取消
×
提示
确定
请完成安全验证×
相关产品
×
本文献相关产品
联系我们：info@booksci.cn Book学术提供免费学术资源搜索服务，方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。 Copyright © 2023 布克学术 All rights reserved.
京ICP备2023020795号-1
ghs 京公网安备 11010802042870号
Book学术文献互助
Book学术文献互助群
群 号：481959085
Book学术官方微信