18th IEEE/NPSS Symposium on Fusion Engineering. Symposium Proceedings (Cat. No.99CH37050)最新文献

筛选
英文 中文
Operation and control of JT-60U ECRF system JT-60U ECRF系统的操作与控制
S. Shinozaki, M. Shimono, M. Terakado, K. Anno, K. Hiranai, Y. Ikeda, Y. Ikeda, T. Imai, A. Kasugai, S. Moriyama, K. Sakamoto, K. Takahashi, K. Kajiwara, M. Tsuneoka, K. Yokokura, T. Fujii
{"title":"Operation and control of JT-60U ECRF system","authors":"S. Shinozaki, M. Shimono, M. Terakado, K. Anno, K. Hiranai, Y. Ikeda, Y. Ikeda, T. Imai, A. Kasugai, S. Moriyama, K. Sakamoto, K. Takahashi, K. Kajiwara, M. Tsuneoka, K. Yokokura, T. Fujii","doi":"10.1109/FUSION.1999.849866","DOIUrl":"https://doi.org/10.1109/FUSION.1999.849866","url":null,"abstract":"This paper describes the operation and control for the 110 GHz ECRF system for JT-60U, which has started operation since March in 1999. This system is composed of a 1 MW gyrotron, its high voltage power supply, a transmission line about 60 m in length and a quasi-optical antenna using a steerable mirror. Key issues of the ECRF system are to drive the gyrotron stably and to control the local RF deposition profile in a plasma.","PeriodicalId":439507,"journal":{"name":"18th IEEE/NPSS Symposium on Fusion Engineering. Symposium Proceedings (Cat. No.99CH37050)","volume":"3 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"1999-10-25","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"115360703","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 2
Tritium retention behavior in tungsten exposed to off-normal plasma condition 非正常等离子体条件下钨的氚保留行为
H. Nakamura, S. O’hira, M. Nishi, T. Venhaus, R. Causey, D. Hyatt, S. Willms
{"title":"Tritium retention behavior in tungsten exposed to off-normal plasma condition","authors":"H. Nakamura, S. O’hira, M. Nishi, T. Venhaus, R. Causey, D. Hyatt, S. Willms","doi":"10.1109/FUSION.1999.849845","DOIUrl":"https://doi.org/10.1109/FUSION.1999.849845","url":null,"abstract":"A first series of experiment concerning off-normal plasma events were performed under a US-Japan collaboration program. The off-normal plasma event was simulated by introducing nitrogen gas into the DT plasma. The tritium retention amount and thermal desorption behavior of tritium from tungsten exposed pure DT plasma and nitrogen introduced DT plasma was investigated as a function of nitrogen flow rate. As a result. It was found that tritium retention increased and the tritium release temperature rose with increasing nitrogen flow rate. Surface analysis by X-ray photoelectron spectroscopy was also carried out for tungsten specimens after thermal desorption. The effective chemical change on the surface chemical composition or chemical state was not observed between DT and nitrogen introduced DT plasma.","PeriodicalId":439507,"journal":{"name":"18th IEEE/NPSS Symposium on Fusion Engineering. Symposium Proceedings (Cat. No.99CH37050)","volume":"34 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"1999-10-25","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"127109184","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 2
High-current pulsed operation of an inertial-electrostatic confinement (IEC) device 惯性静电约束(IEC)装置的大电流脉冲操作
J. Nadler, G. Miley, M. Coventry, M. Williams, B. Jurczyk, R. Stubbers, Y. Nam
{"title":"High-current pulsed operation of an inertial-electrostatic confinement (IEC) device","authors":"J. Nadler, G. Miley, M. Coventry, M. Williams, B. Jurczyk, R. Stubbers, Y. Nam","doi":"10.1109/FUSION.1999.849821","DOIUrl":"https://doi.org/10.1109/FUSION.1999.849821","url":null,"abstract":"Recent advances in pulsed power supply technology has allowed the star mode inertial-electrostatic confinement (IEC) to pulse to high currents, 17 A, at a peak voltage of 50 kV, and a pulse width of 100 /spl mu/s at a frequency of 10 Hz. These results represent an increase in cathode currents of three orders of magnitude over steady state sources. Neutron production at the peak of the pulse was found to be /spl sim/10/sup 9/ n/s of D-D neutrons. This increase in pulsed current operation, and corresponding linear scaling of fusion reaction rates, represents a significant step forward in the development of IEC controlled fusion. An \"effective-Q\" of this operation was calculated to be 6/spl times/10/sup -5/. Analysis of IEC operation at higher current indicates that breakeven, with an effective-Q of 1.0, might be reached with additional increase in cathode current of only /spl sim/2 orders of magnitude.","PeriodicalId":439507,"journal":{"name":"18th IEEE/NPSS Symposium on Fusion Engineering. Symposium Proceedings (Cat. No.99CH37050)","volume":"115 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"1999-10-25","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"125405189","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 6
Development of direct HIP-bonding processes for tungsten-brush armor joining 钨刷铠装直接髋部焊工艺的发展
D. Driemeyer, K. Slattery, G. Wille, R. Nygren
{"title":"Development of direct HIP-bonding processes for tungsten-brush armor joining","authors":"D. Driemeyer, K. Slattery, G. Wille, R. Nygren","doi":"10.1109/FUSION.1999.849858","DOIUrl":"https://doi.org/10.1109/FUSION.1999.849858","url":null,"abstract":"This paper reviews the design, fabrication, and high-heat-flux testing of tungsten-armored mockups for advanced divertor applications that require active cooling. These mockups represent a single cooling channel, limited length section of a typical element of the divertor plate. They employ the tungsten-brush armor form that has demonstrated acceptable performance at 25 MW/m/sup 2/ absorbed heat flux, surviving over 500 cycles at this level in previous testing at Sandia National Laboratories. The mockups discussed here represent the first attempt to adapt the direct-bonding approach to a HIP (Hot-Isostatic-Press) process, which enables brush-armor bonding over large areas with compound-curvature surfaces. The direct-bonding approach eliminates the application of a plasma-sprayed copper matrix over the bundled brush elements and the associated clean-up machining prior to bonding. Simple, modular fabrication was a key design driver for these mockups since advanced divertor modules must be affordable yet satisfy demanding performance and remote maintenance requirements. The mockups demonstrated successful armor joining using the direct-HIP process, but final high-heat flux testing was limited due to difficulties with melting of the honeycomb layer used to fixture the tungsten rods during fabrication. The paper discusses lessons-learned on these parts and concepts for eliminating the honeycomb on future mockups.","PeriodicalId":439507,"journal":{"name":"18th IEEE/NPSS Symposium on Fusion Engineering. Symposium Proceedings (Cat. No.99CH37050)","volume":"132 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"1999-10-25","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"121970245","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 8
Experience gained in the manufacture of the ITER TFMC 在ITER TFMC的制造中获得的经验
P. Libeyre, G. Bevilacqua, A. Bourquard, P. Decool, H. Fillunger, D. Krischel, A. Laurenti, R. Maix, P. Pesenti, E. Theisen, N. Valle
{"title":"Experience gained in the manufacture of the ITER TFMC","authors":"P. Libeyre, G. Bevilacqua, A. Bourquard, P. Decool, H. Fillunger, D. Krischel, A. Laurenti, R. Maix, P. Pesenti, E. Theisen, N. Valle","doi":"10.1109/FUSION.1999.849809","DOIUrl":"https://doi.org/10.1109/FUSION.1999.849809","url":null,"abstract":"Major steps have been completed in the manufacture of the ITER [Toroidal Field Model Coil] TFMC. We discuss experience gained in the construction of joints. The \"Wind, React and Transfer\" process and the radial plate and double pancake manufacture is presented.","PeriodicalId":439507,"journal":{"name":"18th IEEE/NPSS Symposium on Fusion Engineering. Symposium Proceedings (Cat. No.99CH37050)","volume":"39 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"1999-10-25","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"122046811","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 1
Design of the vacuum liner for the National Compact Stellarator Experiment (NCSX) 国家小型仿星器实验(NCSX)真空衬垫的设计
P. Goranson, A. Brooks, T. Brown, H. Cole, H. Fan, P. Heitzenroeder, B. Nelson, Reiersen, D. Williamson
{"title":"Design of the vacuum liner for the National Compact Stellarator Experiment (NCSX)","authors":"P. Goranson, A. Brooks, T. Brown, H. Cole, H. Fan, P. Heitzenroeder, B. Nelson, Reiersen, D. Williamson","doi":"10.1109/FUSION.1999.849827","DOIUrl":"https://doi.org/10.1109/FUSION.1999.849827","url":null,"abstract":"The National Compact Stellarator Experiment (NCSX) requires an inner vacuum vessel (liner) which will serve as a structural component, withstanding full atmospheric pressure and magnetic disruption loads. It must also be capable of bake out to 350 /spl deg/C. Without imparting excessive thermal loading on saddle coils which reside on an outer shell surrounding the liner. NCSX will be sited in the Princeton Beta Experiment (PBX) test cell. Many of the existing site assets including the test cell, TF and PF coils, power supplies, neutral beam heating systems, and site utilities will be utilized to minimize the cost of the project. The conceptual design features a stellarator core that is pre-fabricated and dropped into place on the PBX platform. The existing TF and PF coils are then reassembled around the stellarator core. Trade studies have been conducted to explore different configurations for the liner and the saddle coil structure. These included a design which used a low conductance non vacuum liner assembled within an outer vessel which surrounded the NCSX device, and served as the primary vacuum containment. The plasma has three periods and is very convoluted, changing in cross section from nearly circular to bean shaped with a very concave contour on the inner surface. The contour repeats twice every period, that is the shape is identical after 60 degrees toroidally, but with the shape inverted 180 degrees. The liner is required to follow the plasma surface very closely and, as result, is complex in shape. A trade off study has been made to determine the best fabrication technique to produce such a liner. The study included casting, pressing, explosive forming, isostatic pressing, and brake bending from flat developed patterns. The decision on a fabrication method relied heavily on previous experience by other experiments such as HSX, W7AS, and W7-X which dealt with similar, convoluted shapes. The method picked was the flat pattern technique utilized by Wendelstein W7-AS. The liner is designed to be built in three sections corresponding to the plasma field periods, and final assembled around an inner shell core. After welding of the liner sections, the outer shell segments will assembled around the liner. Saddle coils will then installed around the shell insulation must be installed between the liner and shell to protect the shell during liner bake out, and to minimize heat transfer from the cooler shell during operation. Because the radial build up is limited and the shell is designed to operate at cryogenic (LN2) temperatures the choice of insulation materials is limited. A trade off study has been performed and extensive thermal analyses have been done to determine an insulation design which can operate in the extreme temperature range from 77 K to 623 K. The engineering design is being developed by a team from Oak Ridge National Laboratory and Princeton Plasma Physics Laboratory. A Physics Validation Review of NCSX is planned for Septem","PeriodicalId":439507,"journal":{"name":"18th IEEE/NPSS Symposium on Fusion Engineering. Symposium Proceedings (Cat. No.99CH37050)","volume":"25 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"1999-10-25","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"116730287","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 1
Support system of the KSTAR vacuum vessel KSTAR真空容器的支撑系统
B. J. Yoon, S. In, S. Cho
{"title":"Support system of the KSTAR vacuum vessel","authors":"B. J. Yoon, S. In, S. Cho","doi":"10.1109/FUSION.1999.849823","DOIUrl":"https://doi.org/10.1109/FUSION.1999.849823","url":null,"abstract":"The conflicting condition, which generates not only EM interactions during plasma disruptions but also the thermal expansion during a baking, can be solved by making the support system, in principle, rigid in the vertical direction and soft in the radial direction, adopting Hilman roller and leaf spring concepts. In this paper a preliminary design concept of the leaf spring is presented. A parametric study using analytic equations, and results of 3D structure analysis with 180/spl deg/ model of the vessel including the support system are also discussed.","PeriodicalId":439507,"journal":{"name":"18th IEEE/NPSS Symposium on Fusion Engineering. Symposium Proceedings (Cat. No.99CH37050)","volume":"18 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"1999-10-25","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"129815974","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 4
A neural network approach for the detection of the locking position in RFX RFX中锁定位置检测的神经网络方法
O. Barana, G. Manduchi, A. Serri, P. Sonato
{"title":"A neural network approach for the detection of the locking position in RFX","authors":"O. Barana, G. Manduchi, A. Serri, P. Sonato","doi":"10.1109/FUSION.1999.849905","DOIUrl":"https://doi.org/10.1109/FUSION.1999.849905","url":null,"abstract":"Recently in RFX, where wall locked modes were always present, a new technique has demonstrated the possibility to induce a continuous rotation of the modes with respect to the wall. In this technique the nonlinear coupling of the m=0 and m=1 modes has been used to decouple the modes themselves. In the present experiments the mode rotation is induced with a preprogrammed waveform of a toroidal magnetic field rotating ripple. A feedback system able to create a continuous rotation with variable and increasing speed is now under implementation. A neural network (NN) has been developed to identify the locked mode position. In the paper different NNs are presented, discussed and compared.","PeriodicalId":439507,"journal":{"name":"18th IEEE/NPSS Symposium on Fusion Engineering. Symposium Proceedings (Cat. No.99CH37050)","volume":"1 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"1999-10-25","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"130544406","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 5
Application of advances in manufacture techniques to replacement components on JET NI beamlines 先进的制造技术在JET NI光束线上的应用
D. Martin, M. Watson, M. Meuhleisen
{"title":"Application of advances in manufacture techniques to replacement components on JET NI beamlines","authors":"D. Martin, M. Watson, M. Meuhleisen","doi":"10.1109/FUSION.1999.849831","DOIUrl":"https://doi.org/10.1109/FUSION.1999.849831","url":null,"abstract":"Since the first procurement phase of JET in the late 1970's and early 1980's advances in manufacturing techniques have rendered obsolete same of the original methods of producing some JET components. Set against this background the the neutral injection beamlines have been operating since 1986 with ever increasing demands such that their performance is now at 160% of the original design parameters. This enhanced performance over an extended period, combined with tritium contamination, has necessitated the evaluation and reanalysis of all original high-risk components where fatigue and/or operational limits may have been reached. The application of new techniques and a value engineered approach can produce not only higher performance, more robust and accurate components but can, in many cases, result in significant cost reactions. Two such components will be discussed, namely extraction grids and ion source bodies of the PINI system.","PeriodicalId":439507,"journal":{"name":"18th IEEE/NPSS Symposium on Fusion Engineering. Symposium Proceedings (Cat. No.99CH37050)","volume":"45 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"1999-10-25","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"127565325","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 1
Hybrid baking system for the vacuum vessel of the Spanish stellarator TJ-II 西班牙仿星器TJ-II真空容器的混合烘烤系统
R. Carrasco
{"title":"Hybrid baking system for the vacuum vessel of the Spanish stellarator TJ-II","authors":"R. Carrasco","doi":"10.1109/FUSION.1999.849826","DOIUrl":"https://doi.org/10.1109/FUSION.1999.849826","url":null,"abstract":"The vacuum vessel of the TJ-II is bakeable at 150/spl deg/C in order to provide a good base pressure (10/sup -8/ mbar). A hybrid baking system has been chosen, using a combination of electrical heaters and induction heating by currents in toroidal coils of TJ-II. The induction heating is used to bake the rings and the groove of the vacuum vessel, while the electrical heaters heat the external part of the sectors and ports. The high density of temperature sensors ensures the uniformity of the baking process during the long baking cycles. This paper deals with the development and test of this hybrid baking system and concentrates on its design, construction, commissioning and operation.","PeriodicalId":439507,"journal":{"name":"18th IEEE/NPSS Symposium on Fusion Engineering. Symposium Proceedings (Cat. No.99CH37050)","volume":"4 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"1999-10-25","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"126313978","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 0
0
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
确定
请完成安全验证×
相关产品
×
本文献相关产品
联系我们:info@booksci.cn Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。 Copyright © 2023 布克学术 All rights reserved.
京ICP备2023020795号-1
ghs 京公网安备 11010802042870号
Book学术文献互助
Book学术文献互助群
群 号:604180095
Book学术官方微信
小红书