M. L. Walker, J. Scoville, Robert D. Johnson, A. W. Hyatt, J. Lee
{"title":"Automated fault detection for DIII-D tokamak experiments","authors":"M. L. Walker, J. Scoville, Robert D. Johnson, A. W. Hyatt, J. Lee","doi":"10.1109/FUSION.1999.849897","DOIUrl":"https://doi.org/10.1109/FUSION.1999.849897","url":null,"abstract":"An automated fault detection software system has been developed and was used during 1999 DIII-D plasma operations. The Fault Identification and Communication System (FICS) operates automatically after every plasma discharge to check dozens of subsystems for proper operation and communicates the test results to the tokamak operator. This system is now used routinely during DIII-D operations and has led to an increase in tokamak productivity.","PeriodicalId":439507,"journal":{"name":"18th IEEE/NPSS Symposium on Fusion Engineering. Symposium Proceedings (Cat. No.99CH37050)","volume":"36 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"1999-11-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"123523111","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Use of near-infrared detector to sense RF antenna heating","authors":"R. Legg, R. Lee, W. Baity","doi":"10.1109/FUSION.1999.849898","DOIUrl":"https://doi.org/10.1109/FUSION.1999.849898","url":null,"abstract":"The three antennas used for ion cyclotron heating (ICH) experiments on DIII-D have experienced localized heating of the Faraday shield rods during plasma operations which has resulted in some melting. This melting is of great concern not only because of the damage it does to the rf system's ability to deliver RF to the plasma, but because of its potential to contaminate the plasma during a shot and cast the experimental results from the shot into question. A real-time sensor to detect the temperature of the antennae during plasma operations is described. The sensor uses an avalanche photodiode (APD) with sensitivity from 0.4 to 1.0 /spl mu/m to monitor the temperature of the antennae. Calculations for the detector sensitivity based on Planck's law are compared with experimental results and detector data taken during plasma operations are presented.","PeriodicalId":439507,"journal":{"name":"18th IEEE/NPSS Symposium on Fusion Engineering. Symposium Proceedings (Cat. No.99CH37050)","volume":"24 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"1999-11-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"116755334","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
J. Leuer, M. Walker, D. Humphreys, J. Ferron, A. Nerem, B. Penaflor
{"title":"Development of a closed loop simulator for poloidal field control in DIII-D","authors":"J. Leuer, M. Walker, D. Humphreys, J. Ferron, A. Nerem, B. Penaflor","doi":"10.1109/FUSION.1999.849895","DOIUrl":"https://doi.org/10.1109/FUSION.1999.849895","url":null,"abstract":"The design of a model-based simulator of the DIII-D poloidal field system is presented. The simulator is automatically configured to match a particular DIII-D discharge circuit. The simulator can be run in a data input mode, in which prior acquired DIII-D shot data is input to the simulator, or in a stand-alone predictive mode, in which the model operates in closed loop with the plasma control system. The simulator is used to design and validate a multi-input-multi-output controller which has been implemented on DIII-D to control plasma shape. Preliminary experimental controller results are presented.","PeriodicalId":439507,"journal":{"name":"18th IEEE/NPSS Symposium on Fusion Engineering. Symposium Proceedings (Cat. No.99CH37050)","volume":"25 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"1999-11-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"116744429","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Extending DIII-D neutral beam modulated operations with a CAMAC based total on time interlock","authors":"D.S. Baggest, J. Broesch, J. Phillips","doi":"10.1109/FUSION.1999.849888","DOIUrl":"https://doi.org/10.1109/FUSION.1999.849888","url":null,"abstract":"A new total-on-time interlock has increased the operational time limits of the neutral beam systems at DIII-D. The interlock, called the Neutral Beam On-Time-Limiter (NBOTL), is a custom built CAMAC module utilizing a Xilinx 9572 Complex Programmable Logic Device (CPLD) as its primary circuit. The Neutral Beam Injection Systems are the primary source of auxiliary heating for DIII-D plasma discharges and contain eight sources capable of delivering 20 MW of power. The delivered power is typically limited to 3.5 s per source to protect beam-line components, while a DIII-D plasma discharge usually exceeds 5 s. Implemented as a hardware interlock within the neutral beam power supplies, the NBOTL limits the beam injection time.","PeriodicalId":439507,"journal":{"name":"18th IEEE/NPSS Symposium on Fusion Engineering. Symposium Proceedings (Cat. No.99CH37050)","volume":"1 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"1999-11-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"129347317","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Reduction of carbon influx by minimizing tile heating in DIII-D","authors":"M. Friend, C. Baxi, M. Mahdavi, R. O’Neill","doi":"10.1109/FUSION.1999.849894","DOIUrl":"https://doi.org/10.1109/FUSION.1999.849894","url":null,"abstract":"As predicted by theoretical models, under certain plasma configurations the edges of the graphite tiles lining the walls of the DIII-D vacuum vessel can exceed 2000/spl deg/C. This is the temperature at which ablation occurs for the ATJ graphite material for localized heating (1500/spl deg/C for the face of the tile) and thus represents an operational limit for the tokamak. This theoretical prediction is confirmed by observed increased carbon contamination in the plasma and wearing of the tile edges. Several approaches were investigated to minimize tile edge heating by reducing the amount of heat flux on the tiles toroidal and poloidal surfaces. This was accomplished by modifying the geometry of the top two rows of the DIII-D centerpost tiles.","PeriodicalId":439507,"journal":{"name":"18th IEEE/NPSS Symposium on Fusion Engineering. Symposium Proceedings (Cat. No.99CH37050)","volume":"261 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"1999-11-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"114508881","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
H. Kugel, W. Blanchard, G. D'Amico, R. Gernhardt, T. Provost
{"title":"NSTX filament preionization and glow discharge cleaning systems","authors":"H. Kugel, W. Blanchard, G. D'Amico, R. Gernhardt, T. Provost","doi":"10.1109/FUSION.1999.849841","DOIUrl":"https://doi.org/10.1109/FUSION.1999.849841","url":null,"abstract":"Initial NSTX GDC experiments were performed with one moveable anode and a biased filament preionization system that allowed D/sub 2/, and He glow discharge breakdowns at the actual operating pressure, voltage and current. The biased filament system was also operated continuously during ohmic operations, and used to reduce volt-sec consumption for February 1999 plasma discharges up to 280 KA. An upgraded system has been installed with 2 fixed wall anodes and 3 biased filaments; 2 on the mid-plane and one in the divertor region; all separately controllable remotely using a PLC system. Recent applications include assisting in preionization for 800 KA plasma discharges.","PeriodicalId":439507,"journal":{"name":"18th IEEE/NPSS Symposium on Fusion Engineering. Symposium Proceedings (Cat. No.99CH37050)","volume":"1 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"1999-11-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"129638533","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"A superconducting quadrupole array for transport of multiple high current beams","authors":"A. Falten, D. Shuman","doi":"10.1109/FUSION.1999.849857","DOIUrl":"https://doi.org/10.1109/FUSION.1999.849857","url":null,"abstract":"We present a conceptual design of a superconducting quadrupole magnet array for the side-by-side transport of multiple high current particle beams in induction linear accelerators. The magnetic design uses a modified cosine 2/spl theta/ current distribution inside a square cell boundary. Each interior magnet's neighbors serve as the return flux paths and the poles are placed as close as possible to each other to facilitate this. No iron is present in the basic 2-D magnetic design; it will work at any current level without correction windings. Special 1/8/sup th/ quadrupoles are used along the transverse periphery of the array to contain and channel flux back into the array, making every channel look as part of an infinite array. This design provides a fixed dimension array boundary equal to the quadrupole radius that can be used for arrays of any number of quadrupole channels, at any field level. More importantly, the design provides magnetic field separation between the array and the induction cores which may be surrounding it. Flux linkage between these two components can seriously affect the operation of both of them.","PeriodicalId":439507,"journal":{"name":"18th IEEE/NPSS Symposium on Fusion Engineering. Symposium Proceedings (Cat. No.99CH37050)","volume":"73 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"1999-11-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"130131468","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
H. Grunloh, C. Baxi, E. Chin, M. Condon, J. Doane, C. Moeller, R. O’Neill
{"title":"Design and analyses of transmission lines for the 110 GHz ECH upgrade to 6 MW for DIII-D","authors":"H. Grunloh, C. Baxi, E. Chin, M. Condon, J. Doane, C. Moeller, R. O’Neill","doi":"10.1109/FUSION.1999.849887","DOIUrl":"https://doi.org/10.1109/FUSION.1999.849887","url":null,"abstract":"During the summer of 1999 the installation of three new electron cyclotron heating (ECH) transmission lines began as part of the 110 GHz ECH upgrade to 6 MW project for DIII-D. An important step in the development of the transmission line design was the selection of the waveguide size. To make this selection, analyses were conducted to characterize the thermal and radio frequency (RF) loss performance of the key corrugated waveguide components under 1 MW, long pulse (10 s, 1% duty cycle) operation. Other factors that were analyzed included vacuum conductance and pumping speed, ease of installation, space considerations, and overall cost. The two candidate transmission line sizes were 2.50 in. and 1.25 in. i.d. An overview of the design and layout of the proposed transmission lines for the DIII-D ECH upgrade project is presented. Details and results are given for the vacuum conductance analysis of the overall transmission line, the RF loss analyses and tests on corrugated waveguide and miter bends, and the thermal analyses of the mirrors in the corrugated waveguide switch and the power monitor miter bend. Finally, a discussion is presented which weighs the results of these analyses with the experience gained through the installation and operation of the existing three 1 MW ECH systems at DIII-D and concludes with the selection of 1.25 in. i.d. waveguide and components for the upgrade project.","PeriodicalId":439507,"journal":{"name":"18th IEEE/NPSS Symposium on Fusion Engineering. Symposium Proceedings (Cat. No.99CH37050)","volume":"528 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"1999-11-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"123575701","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Optimized baking of the DIII-D vessel","authors":"P. Anderson, A. Kellman","doi":"10.1109/FUSION.1999.849896","DOIUrl":"https://doi.org/10.1109/FUSION.1999.849896","url":null,"abstract":"The DIII-D tokamak vacuum vessel baking system is used to heat the vessel walls and internal hardware to an average temperature of 350/spl deg/C to allow rapid conditioning of the vacuum surfaces. The system combines inductive heating and a circulating hot air system to provide rapid heating with temperature uniformity required by stress considerations. In recent years, the time to reach 350/spl deg/C had increased from 9 hrs to 14 hrs. To understand and remedy this sluggish heating rate, an evaluation of the baking system was recently performed. The evaluation indicated that the mass of additional in-vessel hardware (50% increase in mass) was primarily responsible. This paper reports on this analysis and the results of the addition of an electric air heater and procedural changes that have been implemented. Preliminary results indicate that the time to 350/spl deg/C has been decreased to 4.5 hours and the temperature uniformity has improved.","PeriodicalId":439507,"journal":{"name":"18th IEEE/NPSS Symposium on Fusion Engineering. Symposium Proceedings (Cat. No.99CH37050)","volume":"1 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"1999-11-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"129797775","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
D. I. Simon, N. Bretz, E. Marmar, R. Bravenec, R. Parsells
{"title":"Optical and mechanical design of C-Mod motional Stark effect diagnostic","authors":"D. I. Simon, N. Bretz, E. Marmar, R. Bravenec, R. Parsells","doi":"10.2172/14501","DOIUrl":"https://doi.org/10.2172/14501","url":null,"abstract":"A motional Stark effect (MSE) instrument is being installed on the Alcator C-Mod tokamak at MIT. This MSE diagnostic will provide measurements of the spatial profile of the internal poloidal magnetic field. The MSE has its primary collection optics inside the vacuum vessel. The light collected by the internal optics passes through a vacuum window and is relayed to a fiber optic array. The MSE optics are shared by a beam emission spectroscopy (BES) diagnostic which measures electron density fluctuations and their spatial correlations. This optical system requires high throughput and spatial resolution of less than 1 cm at the focal plane in the plasma. The design requirements for the internal optics also include the effects associated with plasma impingement, plasma disruptions, and thermal excursions.","PeriodicalId":439507,"journal":{"name":"18th IEEE/NPSS Symposium on Fusion Engineering. Symposium Proceedings (Cat. No.99CH37050)","volume":"37 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"1999-11-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"127995677","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}