Rosa L. Simencio Otero, S. Szénási, Z. Fried, I. Felde, Jônatas M. Viscaino, L. Canale, G. Totten
{"title":"Parallelized Particle Swarm Optimization to Estimate the Heat Transfer Coefficients of a Series of Vegetable Oils in Comparison with Typical Fast Petroleum Quench Oil Quenchant","authors":"Rosa L. Simencio Otero, S. Szénási, Z. Fried, I. Felde, Jônatas M. Viscaino, L. Canale, G. Totten","doi":"10.31399/asm.cp.ht2019p0260","DOIUrl":"https://doi.org/10.31399/asm.cp.ht2019p0260","url":null,"abstract":"\u0000 An inverse solver for the estimation of the temporospacial heat transfer coefficients (HTCs), without using prior information of the thermal boundary conditions, was used for immersion quenching into a series of vegetable oils and two commercial petroleum oil quenchants. The Particle Swarm Optimization method was used on near-surface temperature-time cooling curve data obtained with the so-called Tensi multithermocouple 12.5 mm diameter x 45 mm Inconel 600 probe. The fitness function to be minimized by a particle swarm optimization (PSO) approach is defined by the deviation of the measured and calculated cooling curves. The PSO algorithm was parallelized and implemented on a Graphics Processing Unit architecture. This paper describes in detail the PSO methodology to compare and differentiate the potential quenching properties attainable with a series of vegetable oils including: cottonseed, peanut, canola, coconut, palm, sunflower, corn and a soybean oil vs a typical accelerated petroleum oil quenchant.","PeriodicalId":439250,"journal":{"name":"Heat Treat 2019: Proceedings from the 30th Heat Treating Society Conference and Exposition","volume":"454 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2019-12-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"125789251","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
G. Kumari, C. Boehlert, S. Sankaran, M. Sundararaman
{"title":"The Effects of Solutionizing and Aging temperature on the Microstructure of Allvac 718plus","authors":"G. Kumari, C. Boehlert, S. Sankaran, M. Sundararaman","doi":"10.31399/asm.cp.ht2019p0096","DOIUrl":"https://doi.org/10.31399/asm.cp.ht2019p0096","url":null,"abstract":"\u0000 A study on the microstructural evolution of a Ni-based superalloy, Allvac 718Plus, in the forged condition, was performed by varying the solutionizing temperature. Different solutionizing temperatures were chosen to obtain different fractions of the gamma prime (Ni3(Al,Ti,Nb), γ’) and delta (Ni3Nb, δ) phase precipitates. The solutionizing temperatures ranged between 945°C to 1100°C. After solutionizing, the samples were subjected to a standard two-step aging treatment (788°C for 8h followed by 704°C for 8h). The 954°C solutionizing treatment resulted in incomplete dissolution of the γ’ phase and a relatively high volume fraction of the δ phase, which formed preferentially at grain boundaries. The γ’ phase was completely dissolved during each of the other three solutionizing treatments (1000°C, 1050°C, and 1100°C), while the fraction of the δ phase decreased with increasing solutionizing temperature. The 1100°C solutionizing treatment led to significant growth of the matrix grains (Ni (FCC), γ).","PeriodicalId":439250,"journal":{"name":"Heat Treat 2019: Proceedings from the 30th Heat Treating Society Conference and Exposition","volume":"91 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2019-12-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"122093526","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Advanced CFC Fixture Applications: Their Scientific Challenges and Economic Benefits","authors":"J. Demmel","doi":"10.31399/asm.cp.ht2019p0032","DOIUrl":"https://doi.org/10.31399/asm.cp.ht2019p0032","url":null,"abstract":"\u0000 Following the work done at NASA to use carbon fiber reinforced carbon (CFC) materials as a replacement for mainly cast steel for Fixtures, Racks or parts of it in heat treatment industry, a successful development of a new generation of ingenious Fixtures was started in the mid 1990s by the author and his team. CFC have been shown to have lower density, lower thermal expansion and increased strength at high temperatures resulting in smaller, lighter Fixtures with shorter heating and cooling times, better process capability and, in some cases integrated material flow. The thermochemical and other details for still three main challenges like 1st oxidation of CFC, 2nd possible interaction between CFC and the steel parts and 3rd CFC Fixture interaction with liquid media like oil will be discussed. Furthermore, successful industry CFC Fixture applications which pay-off on several reasons are introduced.","PeriodicalId":439250,"journal":{"name":"Heat Treat 2019: Proceedings from the 30th Heat Treating Society Conference and Exposition","volume":"35 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2019-12-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"126511908","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Performance Change of Quench Oils Due to Heat and Oxidative Deterioration","authors":"T. Sugiura","doi":"10.31399/asm.cp.ht2019p0309","DOIUrl":"https://doi.org/10.31399/asm.cp.ht2019p0309","url":null,"abstract":"\u0000 Quench oils are used according to needed qualities such as quench hardness, distortion, and appearance. However properties and performance of quench oils may change due to heat and oxidative deterioration. In addition, the properties and performance changes due to heat and oxidative deterioration also differ depending on the types of base oil and additives used in the formulation of the quench oil. In order to use quench oils for a long period, it is necessary to grasp the properties and performance changes within a quench oil due to heat and oxidative deterioration.In this study, we investigated how heat and oxidative deterioration changes of dark and transparent quench oils. We accelerated the heat and oxidation deterioration testing to determine the performance change of the quench oils and investigate if there is a correlation with the deterioration tendency of quench oils in a laboratory setting versus actual quench furnace usage In conclusion, in the transparent type, the brightness is better compared to the dark type of quench oil. While the cooling performance in transparent oils decrease because the vapor blanket stage length is extended. For dark oils the brightness level is less than the transparent type of oil. However, the stability of the cooling performance is high because the vapor blanket stage length is hardly changed.","PeriodicalId":439250,"journal":{"name":"Heat Treat 2019: Proceedings from the 30th Heat Treating Society Conference and Exposition","volume":"44 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2019-10-17","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"130635299","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Prediction of Tempering Effect on Jominy Hardenability Curve","authors":"M. Maniruzzaman","doi":"10.31399/asm.cp.ht2019p0087","DOIUrl":"https://doi.org/10.31399/asm.cp.ht2019p0087","url":null,"abstract":"\u0000 Modeling of as-tempered hardness in steel is essential to understanding final properties of heat-treated components. Most of the tempering mathematical models derive a tempering parameter using Hollomon-Jaffe formulation. Some recent models incorporate chemical composition into the general Hollomon-Jaffe relationship. This paper compares model predictions with a substantial set of actual tempered Jominy End Quench bars and the hardness data from them. Improvements to the models and direction for future work are discussed.","PeriodicalId":439250,"journal":{"name":"Heat Treat 2019: Proceedings from the 30th Heat Treating Society Conference and Exposition","volume":"05 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2019-10-17","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"127268917","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Quench Oil Cleanliness and Part Quality","authors":"E. Rowland","doi":"10.31399/asm.cp.ht2019p0300","DOIUrl":"https://doi.org/10.31399/asm.cp.ht2019p0300","url":null,"abstract":"\u0000 Serious problems related to quench oil contamination have always affected the heat treat industry. These problems have led to shortened oil life, variations in the quench curve, loss of production time, unplanned maintenance, sludge accumulation, surface deposits, and massive amounts of rework costs associated with additional part cleaning. This paper will detail the causes for contamination, including; carbon deposits, oxidation of the oil that result in unwanted by-products, ingress of dirt from parts and external sources, and water ingress. We also discuss a way to eliminate the extensive downtime associated with excessive sludge, and cleaning of reservoirs and equipment. The paper will give visual representations of the effects of quenching in dirty oil vs. quenching with clean oil. Additionally, we will look at several case studies that show the relationship of clean oil to clean parts and proper quenching properties. The paper will also detail various methods of particulate and water removal and how effective they are with the quench oil application. This session would be important for the attendees that are utilizing quench oils and are looking to extend their oil life, quality of their parts, and reducing overall costs associated with the process.","PeriodicalId":439250,"journal":{"name":"Heat Treat 2019: Proceedings from the 30th Heat Treating Society Conference and Exposition","volume":"100 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2019-10-17","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"123828804","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Improving Inductive Welding System Performance with Soft Magnetic Composites","authors":"Sean M. Muyskens","doi":"10.31399/asm.cp.ht2019p0063","DOIUrl":"https://doi.org/10.31399/asm.cp.ht2019p0063","url":null,"abstract":"\u0000 Inductive welding is a popular method for making metallic tubes used in a variety of industries. A majority of these induction tube welding systems use internal magnetic flux controllers (impeders) to limit the current flowing on the ID of the tube under the induction coil. As higher power, solid state IGBT power supplies become more widely available for tube welding, and demand for lower cost tubes with higher strength to weight ratios increases, magnetic loading of these impeders is also increasing. Traditionally, impeders are made of ferrites which have a low saturation flux density and can become saturated in these demanding conditions. Saturation of the impeder results in greater currents on the tube ID and lower process efficiency and weld quality. In order to expand the upper operating range of these more demanding systems while maintaining the weld quality, a change in impeder material from ferrites to soft magnetic composites (SMC) with greater saturation flux densities is suggested, as well as the addition of external magnetic controllers (bridges). In this paper, a comparison is made between induction systems with impeders constructed from traditional ferrites and those utilizing bridges and impeders made from SMCs. To do this, a simulation study will be used to estimate impeder flux density, required coil current, and temperature distribution at the end of heating when using impeders made of the two materials, with and without bridges. By soft coupling 3-D electromagnetic models with 2-D electromagnetic and thermal models, a fast and accurate depiction of the welding process can be achieved. A case study is presented comparing simulation results to experimental results.","PeriodicalId":439250,"journal":{"name":"Heat Treat 2019: Proceedings from the 30th Heat Treating Society Conference and Exposition","volume":"515 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2019-10-16","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"123303089","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Seamless Induction Hardening of a 42CrMo4 Slewing Bearing","authors":"Livia Scarpellini","doi":"10.31399/asm.cp.ht2019p0050","DOIUrl":"https://doi.org/10.31399/asm.cp.ht2019p0050","url":null,"abstract":"\u0000 Large slewing bearings are employed in wind turbines and other energy industry applications where they are subjected to harsh working conditions. In order to bear heavy dynamic loads, slewing ring tracks can be surface hardened by induction heating with a seamless process which allows for a uniform heat treatment without soft zones. In comparison with the traditional furnace carburizing, seamless induction hardening is faster, consumes less energy, and has been developed to achieve the same results utilizing medium carbon steel. The presence of a pre-heating coil, with an independent power source, allows for the adjustment of the heat input rate in order to tune the heating process according to the steel characteristics. The pre-heating operation allows for case depths up to 10 mm to be reached without a reduction in scanning speed or productivity. A mechanical tracking system adjusts the coils to compensate for ring deformation and thus assure a uniform heating pattern. Surface hardness tests and metallography have been performed in different process stages to verify the process consistency. A fine grain microstructure in the end zone has been obtained thanks to the pre-heating coil, which avoids surface overheating.","PeriodicalId":439250,"journal":{"name":"Heat Treat 2019: Proceedings from the 30th Heat Treating Society Conference and Exposition","volume":"46 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2019-10-16","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"130018632","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Gas Nitriding Comparison of Austenitic and Martensitic Stainless Steels","authors":"A. Welch","doi":"10.31399/asm.cp.ht2019p0349","DOIUrl":"https://doi.org/10.31399/asm.cp.ht2019p0349","url":null,"abstract":"\u0000 The heat treatment method of gas nitriding is proving to be a viable option as a low temperature case hardening process for a variety of stainless steels used in numerous applications. A comparison between an austenitic stainless steel, grade 304, and a martensitic stainless steel, grade 410 in the hardened and non-hardened conditions is used to show the differences in properties obtained as a result of gas nitride process adjustments. The achieved properties, compound layer thickness, hardness, and porosity level along with the measured depth of hardening, can be used to determine which material will be the best option depending on the application.","PeriodicalId":439250,"journal":{"name":"Heat Treat 2019: Proceedings from the 30th Heat Treating Society Conference and Exposition","volume":"45 1 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2019-10-16","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"123515055","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Effect of Alloying Additions of Aluminium and Iron on the Creep Resistance of Ti-12Cr (wt.%)","authors":"Harishankar Chakravarty","doi":"10.31399/asm.cp.ht2019p0355","DOIUrl":"https://doi.org/10.31399/asm.cp.ht2019p0355","url":null,"abstract":"Titanium (Ti) and its alloys are among the desired materials for biomaterial, marine, and aerospace applications due to their excellent properties. Metastable beta titanium (β-Ti) alloys exhibit enhanced strengths and hardness values after thermomechanical processing (TMP) due to the presence of omega (ω) and alpha (α) phase precipitates in the beta (β) matrix. In this study, the creep properties of three different β-Ti alloys, Ti-12Cr-1Fe-3Al (wt. %), Ti-12Cr-3Al (wt. %), and T- 12Cr (wt. %), were experimentally obtained at different applied stresses and at 683 K. The relationship between microstructure and creep properties was investigated. X-ray diffractometer (XRD), optical microscope (OM), and scanning electron microscope (SEM) were used to help characterize the microstructure before and after creep deformation. The hardness of alloys increased after heat treatment for 48 hrs at 410 ºC due to the precipitation of the α and ω phases. The creep tests showed that Ti-12Cr-1Fe-3Al (wt. %) was the most creep resistant and Ti-12Cr (wt. %) was the least creep resistant.","PeriodicalId":439250,"journal":{"name":"Heat Treat 2019: Proceedings from the 30th Heat Treating Society Conference and Exposition","volume":"36 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2019-10-16","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"133550131","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}