{"title":"The Effects of Secondary Phases on the Characteristics of Diffusion-induced Functional Surface Treatments","authors":"Yanjun Huang, M. Ohta, T. Pederson, O. Milligan","doi":"10.31399/asm.cp.ht2019p0026","DOIUrl":"https://doi.org/10.31399/asm.cp.ht2019p0026","url":null,"abstract":"\u0000 For engineering materials such as cast aluminum or cast iron used in wear applications, the wear surfaces are modified to increase wear resistance. Conversion coatings are the most common surface modification methods in many alloys in which the wear surfaces are chemically, electrochemically or thermally activated and converted into coherent ceramic structures that are resistant to wear. The development of conversion coatings is controlled by the diffusion mechanisms of the functional film forming elements and affected by many factors such as temperature, chemistry and microstructure of the substrate. This paper attempts to examine the effects of the secondary phases in the cast structures to the diffusion behaviors of the conversion coating forming elements and the general coating characteristics. Processes to produce desirable substrate microstructure in order to achieve preferred coating characteristics at lower processing costs and methods to measure the effective functional film thickness are proposed.","PeriodicalId":439250,"journal":{"name":"Heat Treat 2019: Proceedings from the 30th Heat Treating Society Conference and Exposition","volume":"79 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2019-12-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"126131923","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"An Approach to Micro Segregation Level and Presence of Quench Cracks in Medium Carbon Low Alloy Steels","authors":"Cato Dybdahl, Nora Dahle, Stanka Tomovic-Petrovic","doi":"10.31399/asm.cp.ht2019p0316","DOIUrl":"https://doi.org/10.31399/asm.cp.ht2019p0316","url":null,"abstract":"\u0000 Samples from forged and heat-treated steel products with known quench crack histories have been mapped in order to study a possible relation between banding segregation and quench cracking. The steels were medium carbon low alloy steels, ingot and continuous cast, as well as vacuum arc remelt D6AC. EDS X-ray mapping was applied to characterize the banding segregation pattern from casting i.e. gradient of chemical composition that creates direction dependent properties. Trends for segregation ratios followed the expectations: the segregation ratios were higher for the quench sensitive steels.34CrNiMo6, ingot- and continuous cast, was then supplied for testing. Segregation level was pre-checked for decision for heat treatment and testing of as quenched tensile properties. There is an indication of 90 % reduction of the difference between Rm and Rp0.2, the work hardening, for the steel with lowest quality.","PeriodicalId":439250,"journal":{"name":"Heat Treat 2019: Proceedings from the 30th Heat Treating Society Conference and Exposition","volume":"1 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2019-12-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"129048969","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Mohammad Elamin, P. Lombard, Alejandro L. Rodríguez, P. Wendling
{"title":"Optimization of the Heating Phase for the Bi-frequency Heat Treat Process of a Gear","authors":"Mohammad Elamin, P. Lombard, Alejandro L. Rodríguez, P. Wendling","doi":"10.31399/asm.cp.ht2019p0056","DOIUrl":"https://doi.org/10.31399/asm.cp.ht2019p0056","url":null,"abstract":"\u0000 In this contribution, we attempt to optimize the heat process of a gear. The goal is to evaluate the best use of two frequencies to complete the heating phase in the least amount of time achieving a uniform distribution of temperature in the treated area of the gear. Assuming the application of the appropriate cooling, this temperature distribution will lead to the appropriate hardness along and between the teeth of the gear. A 3D model of part of the gear wheel is modelled in a multiphysics magneto-thermal analysis. The two frequencies used for the heating are first evaluated. In the optimization process, the duration of the application for each frequency is a parameter. Temperatures are evaluated through the heating process at selected locations as constraints of the optimization process.","PeriodicalId":439250,"journal":{"name":"Heat Treat 2019: Proceedings from the 30th Heat Treating Society Conference and Exposition","volume":"13 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2019-12-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"127523278","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Distortion Minimization of Bevel Gear Press Quench Hardening Process Using Computer Modeling","authors":"Zhichao Li, B. L. Ferguson, J. Sims","doi":"10.31399/asm.cp.ht2019p0237","DOIUrl":"https://doi.org/10.31399/asm.cp.ht2019p0237","url":null,"abstract":"\u0000 Press quenching is used to harden gears with large sizes or thin-wall sections while keeping distortion under control. For carburized gears, controlling distortion is critical because only a limited amount of the carburized case can be machined off after hardening. In comparison to immersion oil quenching, the press quench process involves more process parameters due to the thermal and mechanical effects from the tooling on the parts. The press quench tooling and process designs are mainly experience based, with iterative trials needed before obtaining an acceptable process. Computer modeling provides a means for understanding the effects of tooling and process parameters on distortion, which can be used to optimize the process and tooling design. One paper using modeling to simulate the gear responses during a press quench process was published in the 23rd IFHTSE Congress, Savannah, Georgia, USA, 2016.[1] The bevel gear was made of carburized AISI 9310, and the radial shrinkage and taper of the inner diameter were the main distortion modes. The modeling results showed that the expanders were not effective in controlling the distortion of the inner diameter of this gear. Based on the simulation results, an oversized plug was proposed to replace the expanders to effectively control the inner diameter of the gear. However, the taper distortion of the bore was not corrected effectively. In this follow-up paper, the effect of a customized plug configuration is modeled, and an optimized plug configuration is designed to further reduce the distortion of the bore from the quench hardening process.","PeriodicalId":439250,"journal":{"name":"Heat Treat 2019: Proceedings from the 30th Heat Treating Society Conference and Exposition","volume":"1 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2019-12-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"130558174","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Advances in Plasma Ion Nitriding","authors":"Ralph P. Poor","doi":"10.31399/asm.cp.ht2019p0160","DOIUrl":"https://doi.org/10.31399/asm.cp.ht2019p0160","url":null,"abstract":"\u0000 The ion or plasma nitriding process has been around for many decades. Developed in the late 1930s, the process was used extensively in Europe. During the 1980s, the process became more popular in the U.S., and many systems were purchased. Early on, the process was not widely understood, and some applications were not a good fit. As plasma nitriding advantages and limitations became realized, the process found its niche in many different industries. Very demanding applications proved to be good applications for ion over gas nitriding. In general, plasma nitriding uses high voltage power operating in the 500–100VDC range, often conducting hundreds of amps to power the process by activating the glow discharge. The glow discharge is not only capable of heating the parts but also ionizes the atmosphere to allow the process to operate. This paper provides insight into plasma nitriding and discusses new advances, widening the range of applications for the process. Many of the advances are in the form of advanced process control electronics, mass flow controllers for process gas flow, and, most importantly, newer high voltage power supply designs with high speed microprocessor arc detection technology.","PeriodicalId":439250,"journal":{"name":"Heat Treat 2019: Proceedings from the 30th Heat Treating Society Conference and Exposition","volume":"47 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2019-12-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"127012875","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"A Comparative Study on Cooling Performance of Hot Oil and Molten Salt Media for Industrial Heat Treatment","authors":"K. M. Pranesh Rao, K. Narayan Prabhu","doi":"10.31399/asm.cp.ht2019p0322","DOIUrl":"https://doi.org/10.31399/asm.cp.ht2019p0322","url":null,"abstract":"\u0000 The present work presents a comprehensive comparative study on the cooling performance of hot oil and molten KNO3- NaNO2-NaNO3 eutectic mixture quench media. The study was conducted using a cylindrical Inconel probe of 16? and 60mm length. Cooling curves at different locations in the probe were acquired using thermocouples- DAQ system. The temperature data was recorded in PC and was subsequently used to calculate spatially dependent transient heat flux at the metal quenchant interface. The heat extraction mechanism in hot oil and NaNO2 eutectic mixture was different. Quench heat transfer occurred in two stages namely boiling stage and convective cooling stage during quenching in molten NaNO2 eutectic mixture. In the case of hot oil, apart from these two stages, third stage of cooling namely vapor blanket stage was observed. A detailed study was conducted to compare magnitude and uniformity of heat extraction during each stage of quenching. Molten salt offered higher cooling rate and more spatial uniform cooling as compared to hot oil quench media. The non-uniformity in surface temperature during boiling stage in Inconel probe was 10 times lower in molten salt medium as compared to that observed in hot oil medium. However, the non-uniformity in surface temperature during convective cooling stage in both the media were comparable. Based on the distribution of characteristic cooling time (t85) calculated in quenched Inconel probe, higher and uniform hardness distribution is predicted in steel parts quenched in molten NaNO2 eutectic mixture media as compared.","PeriodicalId":439250,"journal":{"name":"Heat Treat 2019: Proceedings from the 30th Heat Treating Society Conference and Exposition","volume":"17 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2019-12-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"125191648","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
A. Banka, Andrew Senita, R. Goldstein, T. Eddir, R. Cryderman
{"title":"Short Time Dilatometry Quench System Analyses","authors":"A. Banka, Andrew Senita, R. Goldstein, T. Eddir, R. Cryderman","doi":"10.31399/asm.cp.ht2019p0136","DOIUrl":"https://doi.org/10.31399/asm.cp.ht2019p0136","url":null,"abstract":"\u0000 Dilatometry test systems are commonly used for characterizing the transformation behavior in steels using induction heating for the heating source and gas flow for the cooling source. In these systems, the steel test article is assumed to have a uniform temperature throughout the sample. The accuracy of this assumption depends on the design of the induction heating and gas cooling systems, as well as the time scales for heating and cooling. Previous papers by the authors have shown the variations in temperature that occur during heating and cooling for a TA Instruments DIL805 dilatometer (dilatometer). Investigations were carried out for development of an improved heating/cooling system for this dilatometer using electromagnetic and thermal analyses for the induction coil and CFD analyses for the high-pressure gas cooling system. Electromagnetic analyses showed that a novel cooling system could be incorporated, though higher power would be required to maintain the same heating rate. While the improved cooling system showed promise on an idealized basis, full CFD modeling shows that the system would not provide improved cooling due to complex flow dynamics.","PeriodicalId":439250,"journal":{"name":"Heat Treat 2019: Proceedings from the 30th Heat Treating Society Conference and Exposition","volume":"205 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2019-12-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"114286514","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Jakob D Hamilton, Samantha Sorondo, Andrew Greeley, Bruce E. Kahn, Patricia Cyr, Denis Cormier, Iris V. Rivero
{"title":"Hybrid Manufacturing: Influence of Directed Energy Deposition Parameters on Microstructure and Layer Adhesion of Stainless Steel 316L","authors":"Jakob D Hamilton, Samantha Sorondo, Andrew Greeley, Bruce E. Kahn, Patricia Cyr, Denis Cormier, Iris V. Rivero","doi":"10.31399/asm.cp.ht2019p0018","DOIUrl":"https://doi.org/10.31399/asm.cp.ht2019p0018","url":null,"abstract":"\u0000 In-envelope hybrid manufacturing systems comprised of directed energy deposition (DED) and machining provide flexibility for the fabrication of complex geometries with minimal setup changes. However, for these manufacturing set ups, the effects of deposition parameters such as laser power and scanning speed on the quality of the build remain relatively unexplored. An important aspect for developing components with reliable mechanical properties is a thorough understanding of DED thermodynamics during fabrication. Therefore, DED thermodynamics were defined based on the strengthening properties derived from the thermal gradient (G) and solidification rate (R) of the melt pool. Other factors influencing DED thermodynamics include substrate geometry and surface finish which are expected to affect cooling rates and adhesion, respectively. In this work, stainless steel 316L specimens were fabricated varying laser power intensity, scanning speed, and deposition substrate. The effect of these parameters on the microstructure of the sample components were analyzed. Microstructural evolution at various points within and between layers was studied and correlated to localized hardness. An increase in mechanical properties for fine, equiaxed grains demonstrates the Hall-Petch principle for strengthening of components.","PeriodicalId":439250,"journal":{"name":"Heat Treat 2019: Proceedings from the 30th Heat Treating Society Conference and Exposition","volume":"169 ","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2019-12-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"131521409","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Stefan Habean, J. Sims, Zhichao Li, B. Lynn Ferguson
{"title":"Quenching Process Improvement Through Modeling","authors":"Stefan Habean, J. Sims, Zhichao Li, B. Lynn Ferguson","doi":"10.31399/asm.cp.ht2019p0329","DOIUrl":"https://doi.org/10.31399/asm.cp.ht2019p0329","url":null,"abstract":"\u0000 Computer modeling offers an excellent method to investigate heat treatment processes, especially processes that have quality issues, that are open to use of different alloys, or that are under development.[1-4] A recent presentation from Karlsruhe Institute of Technology[5] was an excellent example of this, where three variations of a novel tube quenching process showed experimental evidence that two of the processes resulted in tubes with cracks on the bore while the third process produced crack-free parts. Interested in investigating this in more detail using computer modeling, a study was initiated to investigate additional process variations to better understand the effect of quenching conditions on stresses and microstructural evolution in the part. With a goal of producing martensite and residual compressive stress in the bore of a 4140 steel tube, a matrix of hardening processes was developed and executed. Models examined heat transfer and also microstructural evolution, i.e. phase transformation kinetics. Results showed that the timing and rate of martensite formation, and bainite kinetics had a significant effect on both the in-process stress state and the residual stress state.","PeriodicalId":439250,"journal":{"name":"Heat Treat 2019: Proceedings from the 30th Heat Treating Society Conference and Exposition","volume":"440 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2019-12-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"116557016","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Non-Destructive Hardness/Microstructure Testing of Heat-Treated Parts by Mass Production, with Multiple Frequency Magnetic Induction Method","authors":"A. Horsch","doi":"10.31399/asm.cp.ht2019p0185","DOIUrl":"https://doi.org/10.31399/asm.cp.ht2019p0185","url":null,"abstract":"\u0000 Increasing quality demands, new product liability regulations, as well as international market networks force manufacturers to take special measures encompassing the field of material testing. Nowadays, specified tolerances are extremely small. Therefore, processes have to include the conducting of 100% material, structure and hardening tests on a fast, reliable and simple basis. The technology applied must be the latest state of art, it must comply with maximum safety requirements and be economical.","PeriodicalId":439250,"journal":{"name":"Heat Treat 2019: Proceedings from the 30th Heat Treating Society Conference and Exposition","volume":"17 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2019-12-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"130650399","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}