IEEE/LEOS 1995 Digest of the LEOS Summer Topical Meetings. Flat Panel Display Technology最新文献

筛选
英文 中文
Application of Gold and Copper Electrodes in Pyridine-Vinylene Based Conjugated Polymer Light Emitting (SCALE) Devices 金、铜电极在吡啶-乙烯基共轭聚合物发光器件中的应用
A. MacDiarmid, H. Wang, J. Park, Y.Z. Wang, D. Gebler, A. Epstein
{"title":"Application of Gold and Copper Electrodes in Pyridine-Vinylene Based Conjugated Polymer Light Emitting (SCALE) Devices","authors":"A. MacDiarmid, H. Wang, J. Park, Y.Z. Wang, D. Gebler, A. Epstein","doi":"10.1109/LEOSST.1995.763990","DOIUrl":"https://doi.org/10.1109/LEOSST.1995.763990","url":null,"abstract":"Conjugated polymers have been studied extensively for their electrical conductivity, interesting optical, and more recently, electroluminescent properties17293. Conjugated polymer light emitting diodes (CPLEDs) were first reported in 1990 using poly(pheny1ene vinylene), (PPV), as the light emitting material'. Previously, we have reported cm the electroluminescent properties of a copolymer of a , derivative of PPV and the nitrogen analog of PPV, poly(2,5-dihexadecanoxy phenylene vinylene pyridyl vinylene), (PPV.PPyV)4 in a variety of different device configurations some of which can be operated in forward and reverse bias modes between copper and IT0 glass substrates thus enabling operation in an AC mode. Some of these involve a 5-layered symmetrically configured AC driven light-emitting (SCALE) configuration3. In the past CPLED devices have usually been operated in the forward bias mode only, the IT0 glass being attached to the positive terminal of the DC power supply. More recently a few reports have appeared involving operation of these devices in the reverse bias mode576 although such operation, at least in certain cases results in rapid breakdown of the device. Both symmetric and asymmetric I/V curves have been reported but even in the almost symmetrical IN curve case the electroluminescence intensity at a given applied potential while operating in an AC mode may differ for forward and reverse bias5. We here compare the use of gold3~7 and copper as both electron and hole injection electrodes in a comparative study of SCALE devices using Al, Cu or Au as the metal electrode and the PPV.PPyV as the emissive polymer. All can be operated in forward and reverse bias modes and in an AC mode. Both the metal and IT0 electrodes are capable of injecting electrons and holes into the electroemissive polymer. A similar intensity of emitted light in forward and reverse bias modes is achievable if both electrodes have approximately the same effective work functions. The Au/EB/(PPV.PPyV)/EB/ITO and Cu/EB/(PPV.PPyV>/EMTO devices were constructed by spin-casting the polyaniline, emeraldine base (EB) from a 1 % wt. EB solution in NMP on the IT0 glass. After spin-casting the PPV.PPyV layer from CHC13 solution on top of the EB layer, another layer of EB was spin-cast on top of the (PPV.PPyV) layer upon which the gold or copper layers were then deposited. The I-V characteristics of the gold electrode device are given in Figure 1. This device operates in both forward and reverse bias modes at approximately the same turn-on potentials (-2 5.0 V). It also operates in an AC mode at 1 Hz to 60 Hz. The intensity of the emitted light is approximately proportional to the current density in both forward and reverse bias modes. The intensity of light emission is more intense in the reverse bias mode than in the forward bias mode. The electroluminescent spectra in forward and reverse bias modes at -* 8 V are given in Figure 2. The above characteristics are in general qualitat","PeriodicalId":425083,"journal":{"name":"IEEE/LEOS 1995 Digest of the LEOS Summer Topical Meetings. Flat Panel Display Technology","volume":"75 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"1995-08-07","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"129077866","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 0
Silica-waveguide optical time-shift network for a 96-element L-band conformal array 96元l波段共形阵列的硅波导光时移网络
W. Ng, R. Loo, V. Jones, J. Lewis
{"title":"Silica-waveguide optical time-shift network for a 96-element L-band conformal array","authors":"W. Ng, R. Loo, V. Jones, J. Lewis","doi":"10.1109/LEOSST.1995.764184","DOIUrl":"https://doi.org/10.1109/LEOSST.1995.764184","url":null,"abstract":"Since the fwst demonstration(1) of an optical steered phased array antenna, many architectures for implementing optical beam-forming networks have been proposed and realized(2). Among the reported schemes, those offering true-time-delay (lTD) still has the best potential for meeting future needs in multifunction and multiband operations, especially over wide scan angles. Thus far, the photonic timeshift modules demonstrated for system insertions were all composed of fiber-based delay-lines, whose lengths were trimmed individually to meet specific time-delay requirements, as dictated by the aperture size and steering angle of the array. An integrated waveguide-based delay-line technology offers several advantages over their fiber-based counterparts. First, the waveguides are typically fabricated by photolithographic processes with dimensional precisions of micronmeters. This enables better differential phase accuracy to be achieved, especially for the fine bits of the time-shifter. Although there is an initial investment for the photomask design, subsequent reproduction of identical sets of delay-lines becomes more efficient and precise with the waveguide-based technology. Secondly, the time-delay module can be packaged more compactly if the waveguide-waferboard can be adopted, in addition, as a monolithic or hybrid integration platfom for the active components. In this paper, we will describe the successful demonstration of a 4-bit optoelectronic (OE) switched Silica-waveguide time-delay network designed to steer a 4 x 24 element conformal array at L band (0.8-1.4 GHz).","PeriodicalId":425083,"journal":{"name":"IEEE/LEOS 1995 Digest of the LEOS Summer Topical Meetings. Flat Panel Display Technology","volume":"152 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"1995-08-07","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"126815208","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 3
Design Techniques for Non-Oversampled, Instantaneously Locked Clock and Data Recovery Circuits - An Overview 非过采样、瞬时锁定时钟和数据恢复电路的设计技术综述
M. Banu, A. Dunlop, W. Fischer, Y. Ota
{"title":"Design Techniques for Non-Oversampled, Instantaneously Locked Clock and Data Recovery Circuits - An Overview","authors":"M. Banu, A. Dunlop, W. Fischer, Y. Ota","doi":"10.1109/LEOSST.1995.764140","DOIUrl":"https://doi.org/10.1109/LEOSST.1995.764140","url":null,"abstract":"Traditional narrow-band clock recovery circuits such as those based on LC tanks, SAW filters or PLLs suffer from the fundamental limitation of locking (reaching steady-state operation) slowly compared to the input data rate. This is inconsequential in classical digital links where phase-coherent data flows continuously. However, if data arrives in asynchronous packets, as it does in modern communication systems such as PON’s (Passive Optical Networks), long locking [times cause significant penalties in the transmission efficiency. For burst-mode applications new clock recovery methods with greater acquisition agility are needed.","PeriodicalId":425083,"journal":{"name":"IEEE/LEOS 1995 Digest of the LEOS Summer Topical Meetings. Flat Panel Display Technology","volume":"91 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"1995-08-07","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"126471431","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 1
Future undersea lightwave networks 未来的海底光波网络
P. Runge
{"title":"Future undersea lightwave networks","authors":"P. Runge","doi":"10.1109/LEOSST.1995.764002","DOIUrl":"https://doi.org/10.1109/LEOSST.1995.764002","url":null,"abstract":"","PeriodicalId":425083,"journal":{"name":"IEEE/LEOS 1995 Digest of the LEOS Summer Topical Meetings. Flat Panel Display Technology","volume":"16 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"1995-08-07","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"121192568","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 0
Wide Bandwidth InAlAs/InGaAs Monolithic PIN-HBT Photoreceiver 宽带宽InAlAs/InGaAs单片PIN-HBT光电接收器
A. Gutierrez-Aitken, K. Yang, X. Zhang, G. Haddad, P. Bhattacharya, L. Lunardi
{"title":"Wide Bandwidth InAlAs/InGaAs Monolithic PIN-HBT Photoreceiver","authors":"A. Gutierrez-Aitken, K. Yang, X. Zhang, G. Haddad, P. Bhattacharya, L. Lunardi","doi":"10.1109/LEOSST.1995.764159","DOIUrl":"https://doi.org/10.1109/LEOSST.1995.764159","url":null,"abstract":"InP-based high performance integrated photoreceivers working at speeds of 10 Gb/s and higher are currently being developed for applications in long-distance optical communications. Monolithically integrated photoreceivers are projected to have better performance than hybrid designs because of smaller parasitic elements, compactness and high reliability. One approach to integrate a p-i-n photodiode with an HBT-based amplifier is to use the base-collector junction as the p-i-n photodiode[l,2]. Using this scheme of integration, no additional fabrication or regrowth steps are needed. Moreover, InP-based HBTs demonstrate excellent microwave performance, uniform current gain, small turn-on voltage and compatibility with low-loss silica optical fibers. In this work. a monolithically integrated photoreceiver using a 3-transistor InAlAs/InGaAs HBT-based transimpedance amplifier has been fabricated and characterized.","PeriodicalId":425083,"journal":{"name":"IEEE/LEOS 1995 Digest of the LEOS Summer Topical Meetings. Flat Panel Display Technology","volume":"26 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"1995-08-07","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"128100317","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 1
ECL Compatible Long Wavelength Transmitter OEIC with Voltage Tuneable Wavelength 兼容ECL长波长发射机OEIC与电压可调波长
P. Birdsall, M. Gilbert, P. O'Sullivan
{"title":"ECL Compatible Long Wavelength Transmitter OEIC with Voltage Tuneable Wavelength","authors":"P. Birdsall, M. Gilbert, P. O'Sullivan","doi":"10.1109/LEOSST.1995.764160","DOIUrl":"https://doi.org/10.1109/LEOSST.1995.764160","url":null,"abstract":"Future applications for optical transmission are expected to include fibre in the loop and high capacity localised optical interconnect within systems. WDM systems are proposed as a flexible means of increasing capacity without increasing bitrate or increasing cost. WDM schemes have been proposed with adjacent wavelength channels having a separation of lnm or lower. For these systems it is necessary to obtain optical sources with precise wavelengths; the tuneable DFB laser is ideal in this respect. Optoelectronic Integrated Circuits (OEICs) offer advantages of reduced component count and parasitics, potentially simplified element management and increased reliability making them well suited to local loop/WDM applications.","PeriodicalId":425083,"journal":{"name":"IEEE/LEOS 1995 Digest of the LEOS Summer Topical Meetings. Flat Panel Display Technology","volume":"69 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"1995-08-07","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"115844216","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 0
Generation of microwave signals by electrically locked mode beating in an OEIC DFB laser with extended cavity 扩展腔OEIC DFB激光器电锁模振荡产生微波信号
A. Bordonalli, B. Cai, P. Williams, A. Seeds
{"title":"Generation of microwave signals by electrically locked mode beating in an OEIC DFB laser with extended cavity","authors":"A. Bordonalli, B. Cai, P. Williams, A. Seeds","doi":"10.1109/LEOSST.1995.764191","DOIUrl":"https://doi.org/10.1109/LEOSST.1995.764191","url":null,"abstract":"A simple method of generating microwave signals by using a single DFB laser integrated with an extended cavity is presented. High spectral purity is achieved by locking to harmonics of an electrical drive signal applied to the laser bias current.","PeriodicalId":425083,"journal":{"name":"IEEE/LEOS 1995 Digest of the LEOS Summer Topical Meetings. Flat Panel Display Technology","volume":"77 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"1995-08-07","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"133135189","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 0
The design of light emitting diodes using blends of multi-block copolymers 利用多嵌段共聚物共混物设计发光二极管
F. E. Karasz
{"title":"The design of light emitting diodes using blends of multi-block copolymers","authors":"F. E. Karasz","doi":"10.1109/LEOSST.1995.764056","DOIUrl":"https://doi.org/10.1109/LEOSST.1995.764056","url":null,"abstract":"Polyphenylene vinylene (PPV) has been widely used as the active layer in polymer light emitting diodes (LEDs). This polymer is normally synthesized via a polar solvent-soluble precursor polyelectrolyte and the final desired PPV polymer, made by thermolysing the precursor, is of somewhat heterogeneous and indefinite structure, particularly with respect to its effective conjugation length. The latter parameter largely controls the wavelength of the emitted light. We have adopted an alternative strategy in which oligomeric sequences of phenylene vinylene with a fixed and selected degree of polymerization are alternated with oligomeric sections of methylene units. The resulting multi-block alternating copolymer is, in contrast to PPV, soluble, and by adjusting the number of PV units, can be designed to emit at any desired wavelength in the visible spectrum. Additional design versatility is provided by the possibility of substituting heterocyclic phenylene analogs and/or appropriately derivatizing the phenylene and/or vinylene units with suitable side groups. Using this strategy a series of copolymers have already been synthesized which emit light over essentially the entire visible range. The design of a particular LED requires additionally an optimization with respect to electronic properties of the respective electrodes sandwiching the polymeric active layer.","PeriodicalId":425083,"journal":{"name":"IEEE/LEOS 1995 Digest of the LEOS Summer Topical Meetings. Flat Panel Display Technology","volume":"68 ","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"1995-08-07","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"114095258","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 0
Optical Fiber Based Interferoceiver 基于光纤的干涉接收机
Ming-Chiang Li
{"title":"Optical Fiber Based Interferoceiver","authors":"Ming-Chiang Li","doi":"10.1109/LEOSST.1995.764201","DOIUrl":"https://doi.org/10.1109/LEOSST.1995.764201","url":null,"abstract":"Sampling oscilloscopes based on fast samplers are the common diagnostic instruments for deciphering transient events. By adding a faster sampler and sampling bridge, a sampling oscilloscope will increase its capabilities. However, as the capabilities increase, a major problem arises, that is often referred to as the throughput limitation. Interesting questions follow: such as do we have other choices, and can we circumvent the throughput limitation? We do have a choice. The newly advanced technology on optical fibers provides us a completely novel alternative.","PeriodicalId":425083,"journal":{"name":"IEEE/LEOS 1995 Digest of the LEOS Summer Topical Meetings. Flat Panel Display Technology","volume":"1 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"1995-08-07","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"116078805","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 5
Modular, scalable, and space qualified lasercorn technology for the gil 模块化、可扩展、符合空间要求的激光技术
E. Swanson
{"title":"Modular, scalable, and space qualified lasercorn technology for the gil","authors":"E. Swanson","doi":"10.1109/LEOSST.1995.764030","DOIUrl":"https://doi.org/10.1109/LEOSST.1995.764030","url":null,"abstract":"","PeriodicalId":425083,"journal":{"name":"IEEE/LEOS 1995 Digest of the LEOS Summer Topical Meetings. Flat Panel Display Technology","volume":"1 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"1995-08-07","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"114759543","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 0
0
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
确定
请完成安全验证×
相关产品
×
本文献相关产品
联系我们:info@booksci.cn Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。 Copyright © 2023 布克学术 All rights reserved.
京ICP备2023020795号-1
ghs 京公网安备 11010802042870号
Book学术文献互助
Book学术文献互助群
群 号:604180095
Book学术官方微信
小红书