{"title":"Cue verification for an automatically-guided wheelchair system","authors":"J. Yoder, S. Skaar","doi":"10.1109/ROBOT.1996.509189","DOIUrl":"https://doi.org/10.1109/ROBOT.1996.509189","url":null,"abstract":"An automatically-guided wheelchair system has been developed at the University of Notre Dame. Like some other automatically-guided vehicles (AGVs), this system uses filtering to combine information from measurements and the state equations to produce accurate ongoing pose estimates. This approach relies on the detection of nonunique passive visual cues placed at known positions throughout the environment. In order to maintain accurate pose estimates, a measurement involving any given detected cue must correspond with the correct cue identity. This paper deals with the approach taken to address the problem of establishing correct identity.","PeriodicalId":400258,"journal":{"name":"Proceedings of IEEE International Conference on Robotics and Automation","volume":"316 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"1996-04-22","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"115223570","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Specifying consistent control goals for kinematically defective manipulation systems","authors":"D. Prattichizzo, A. Bicchi","doi":"10.1109/ROBOT.1996.509251","DOIUrl":"https://doi.org/10.1109/ROBOT.1996.509251","url":null,"abstract":"We focus on the problem of controlling a manipulator so as to trade a desired object trajectory, while guaranteeing that contact forces comply with contact constraints (friction bounds, etc.). When dealing with kinematically defective systems, it is not possible in general to assign arbitrary trajectories of object motions and contact forces. To understand what restrictions position and force reference trajectories should exhibit in order to be feasible by a given system, is the central issue of this work.","PeriodicalId":400258,"journal":{"name":"Proceedings of IEEE International Conference on Robotics and Automation","volume":"29 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"1996-04-22","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"115308865","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Time optimal trajectory planning in dynamic environments","authors":"P. Fiorini, Z. Shiller","doi":"10.1109/ROBOT.1996.506925","DOIUrl":"https://doi.org/10.1109/ROBOT.1996.506925","url":null,"abstract":"This paper presents a method for motion planning in dynamic environments, subject to robot dynamics and actuator constraints. The time optimal trajectory is computed by first generating an initial guess using the concept of velocity obstacle. The initial guess, computed by a global search over a tree of avoidance maneuvers, is then optimized using a dynamic optimization. This method is applicable to repetitive tasks in known dynamic environments, as is demonstrated for a planar robot manipulator.","PeriodicalId":400258,"journal":{"name":"Proceedings of IEEE International Conference on Robotics and Automation","volume":"8 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"1996-04-22","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"115370109","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
B. Mirtich, Yan Zhuang, Ken Goldberg, J. Craig, R. Zanutta, B. Carlisle, J. Canny
{"title":"Estimating pose statistics for robotic part feeders","authors":"B. Mirtich, Yan Zhuang, Ken Goldberg, J. Craig, R. Zanutta, B. Carlisle, J. Canny","doi":"10.1109/ROBOT.1996.506861","DOIUrl":"https://doi.org/10.1109/ROBOT.1996.506861","url":null,"abstract":"In automated assembly lines, part feeders often impose a bottleneck that restricts throughput. To facilitate the design of parts and assembly lines, the authors estimate feedrates based on CAD models of parts. A previous paper (Golberg and Craig, 1995) described how to predict throughput for a vision-based robotic part feeder given the distribution of part poses when parts are randomly dropped on a conveyor belt. Estimating this distribution is also useful for the design of traditional feeders such as vibratory bowls. In this paper the authors describe three algorithms for estimating pose distributions. The authors review the quasi-static estimate reported in Wiegley et al. (1992) and introduce a refinement that takes into account some measure of dynamic stability. The perturbed quasi-static estimate can be computed very rapidly and is more accurate than the quasi-static. Still more accurate are estimates based on Monte Carlo simulation using Impulse, although the latter comes at the penalty of increased computation time. The authors compare estimates from all three algorithms with physical experiments.","PeriodicalId":400258,"journal":{"name":"Proceedings of IEEE International Conference on Robotics and Automation","volume":"28 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"1996-04-22","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"115397661","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Optimization of the inertial and acceleration characteristics of manipulators","authors":"O. Khatib, A. Bowling","doi":"10.1109/ROBOT.1996.509150","DOIUrl":"https://doi.org/10.1109/ROBOT.1996.509150","url":null,"abstract":"Investigates the problem of manipulator design for increased dynamic performance. Optimization techniques are used to determine the design parameters which improve manipulator performance. The dynamic performance of a manipulator is characterized by the inertial and acceleration properties of the end-effector. Our study of inertial and acceleration properties have provided separate descriptions of the characteristics associated with linear and angular motions. This allows a more physically meaningful interpretation of these properties and provides simple models for their analysis. The article presents these models, discusses the design optimization criteria, and formulates the optimization problem. The approach is illustrated in the selection of design parameters of a parallel mechanism.","PeriodicalId":400258,"journal":{"name":"Proceedings of IEEE International Conference on Robotics and Automation","volume":"230 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"1996-04-22","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"117118193","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"A unified approach to inverse and direct kinematics for four kinds of wheeled mobile robots and its applications","authors":"Yongji Wang, J. Linnett, J. W. Roberts","doi":"10.1109/ROBOT.1996.509239","DOIUrl":"https://doi.org/10.1109/ROBOT.1996.509239","url":null,"abstract":"The development of mechanical structures for wheeled vehicles has a very long history. The forms of vehicles can be classified according to the steering and powering of the vehicle as follows: 1) ordinary car-like robots (including passenger cars, single unit trucks, single unit buses and articulated trucks); 2) dual drive robots (dual drive motors with various casters); 3) synchronous drive and steering robots; and 4) omnidirectional robots. Kinematics forms the basis for feasibility analysis of the mechanism, motion feasibility, dynamics and control, trajectory planning and more complicated problem for an autonomous intelligent robot, such as path planning. This paper develops the unified kinematics, both the inverse and the direct types, for the four kinds of wheeled vehicles. The application of the kinematics in path planning problem is also presented.","PeriodicalId":400258,"journal":{"name":"Proceedings of IEEE International Conference on Robotics and Automation","volume":"10 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"1996-04-22","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"120995191","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
E. Holweg, H. Hoeve, W. Jongkind, L. Marconi, C. Melchiorri, C. Bonivento
{"title":"Slip detection by tactile sensors: algorithms and experimental results","authors":"E. Holweg, H. Hoeve, W. Jongkind, L. Marconi, C. Melchiorri, C. Bonivento","doi":"10.1109/ROBOT.1996.509205","DOIUrl":"https://doi.org/10.1109/ROBOT.1996.509205","url":null,"abstract":"Two techniques for slip detection with a rubber-based tactile matrix sensor are presented. The described results have been obtained within a common research activity between the Robotics and Automation Laboratory of the University of Bologna and the Control Laboratory of the Delft University of Technology. The first technique is based on a frequency analysis of the position of the center of force distribution. The main idea is that before a slip situation actually occurs, it is possible to detect a micro movement of the object due to the elasticity of the rubber. By implementing a FFT of the center of distribution and by testing the frequency components, the slip is identified before it practically occurs. The second approach is based on the principle that the normal forces measured by the tactile sensor fluctuate with a certain frequency during slip because of the rubber elasticity. This fluctuation is due to a 'catch and snap back' effect, which is present when an object is slipping over the sensor's surface. By testing the frequency domain of the normal force a slip condition can be detected. A comparison of the two approaches is presented and discussed on the basis of experimental results obtained in both laboratories.","PeriodicalId":400258,"journal":{"name":"Proceedings of IEEE International Conference on Robotics and Automation","volume":"70 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"1996-04-22","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"121027661","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"PRS: a high level supervision and control language for autonomous mobile robots","authors":"F. Ingrand, R. Chatila, R. Alami, Frédéric Robert","doi":"10.1109/ROBOT.1996.503571","DOIUrl":"https://doi.org/10.1109/ROBOT.1996.503571","url":null,"abstract":"We discuss Procedural Reasoning System (PRS) as a high-level control and supervision language adapted to autonomous robots to represent and execute procedures, scripts and plans in dynamic environments. We discuss the main reasons why PRS is well suited for this type of application: (1) The semantics of its plan (procedure) representation, which is important for plan execution and goal refinement; (2) Its ability to construct and act on partial (rather than complete) plans; (3) Its ability to pursue goal-directed tasks while at the same time being responsive to changing patterns of events in bounded time; (4) Its facilities for managing multiple tasks in real-time; (5) Its default mechanisms for handling stringent real-time demands of its environment; and (6) Its meta-level (or reflective) reasoning capabilities. C-PRS has been used to implement an embedded control and supervision system for autonomous mobile robots in two different experimentations that we briefly present. We conclude with some suggestions to further develop C-PRS and with a short review of related work.","PeriodicalId":400258,"journal":{"name":"Proceedings of IEEE International Conference on Robotics and Automation","volume":"156 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"1996-04-22","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"127357829","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Adaptive-fuzzy logic control of robot manipulators","authors":"S. Commuri, F. Lewis","doi":"10.1109/ROBOT.1996.506555","DOIUrl":"https://doi.org/10.1109/ROBOT.1996.506555","url":null,"abstract":"This paper presents a methodology for the design of fuzzy logic controllers (FLC) that guarantees prescribed performance for a general robotic system. It is shown that the proposed online learning algorithm learns the stabilizing membership functions (MFs) online from initial MFs that are selected using simple design criteria. From a practical standpoint, the controller structure leads to efficient implementation and fills a void that existed in the lack of repeatable design methodologies for FLC implementation.","PeriodicalId":400258,"journal":{"name":"Proceedings of IEEE International Conference on Robotics and Automation","volume":"46 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"1996-04-22","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"125063300","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
W. Book, Hobson Lane, L. Love, D. P. Magee, Klaus Obergfell
{"title":"A novel teleoperated long-reach manipulator testbed and its remote capabilities via the Internet","authors":"W. Book, Hobson Lane, L. Love, D. P. Magee, Klaus Obergfell","doi":"10.1109/ROBOT.1996.506845","DOIUrl":"https://doi.org/10.1109/ROBOT.1996.506845","url":null,"abstract":"During the 1995 DOE Robotics Forum at Albuquerque, New Mexico, Georgia Tech's Intelligent Machine Dynamics Laboratory demonstrated remote display capabilities of its telemanipulated long-reach manipulator testbed through the Internet. This paper describes the testbed and addresses the methods, limitations, and capabilities of remote operations.","PeriodicalId":400258,"journal":{"name":"Proceedings of IEEE International Conference on Robotics and Automation","volume":"32 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"1996-04-22","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"125134369","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}