International Journal of Modern Manufacturing Technologies最新文献_第7页

STUDY OF THE BEHAVIOUR FOR THE WORK EQUIPMENT OF A FORKLIFT DURING THE WORKING PROCESS USING FINITE ELEMENT ANALYSIS 用有限元分析方法研究了铲车工作设备在工作过程中的行为

International Journal of Modern Manufacturing Technologies Pub Date : 2022-12-20 DOI: 10.54684/ijmmt.2022.14.3.219

M. A. Potîrniche, G. Căpățână

{"title":"STUDY OF THE BEHAVIOUR FOR THE WORK EQUIPMENT OF A FORKLIFT DURING THE WORKING PROCESS USING FINITE ELEMENT ANALYSIS","authors":"M. A. Potîrniche, G. Căpățână","doi":"10.54684/ijmmt.2022.14.3.219","DOIUrl":"https://doi.org/10.54684/ijmmt.2022.14.3.219","url":null,"abstract":"Industrial manipulators and robots play a very important role in the current process of advanced industrialization. The use of industrial robots has led to increased labor productivity, human replacement in hazardous work situations, increased product quality, rapid recovery of investment. Supple automation, the highest level of programmable automation, is organized into computer-driven production cells and serviced by one or more industrial robots. The transformation of production systems from the human-machine system to the human-robot-machine system has replaced the human in the process of performing dangerous or uncomfortable works. The diversity of definitions given to industrial robots and the lack of consensus on the notion of \"industrial robot\" is a premise for opening new horizons in trying to bring the machine closer to human perfection. The present paper aims to conduct a study of the behavior for the work equipment of a forklift during the work process. The tool used to conduct the study was finite element analysis using specialized Solid Edge software. A 3D model of the forklift's work equipment was introduced in Solid Edge and a dynamic analysis was performed, which led to the equipment's eigenmodes and eigenfrequencies. The displacement of the nodes of the structure in the first 10 eigenmodes of vibration and the potential deformation energy accumulated by the system were chosen for visualization, suggestive results and especially important for the specialists in the domain of construction equipments.","PeriodicalId":38009,"journal":{"name":"International Journal of Modern Manufacturing Technologies","volume":" ","pages":""},"PeriodicalIF":0.0,"publicationDate":"2022-12-20","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"49233100","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

引用次数: 0

Silesian University of Technology, Gliwice, Poland 西里西亚理工大学，波兰格里维兹

International Journal of Modern Manufacturing Technologies Pub Date : 2022-12-20 DOI: 10.54684/ijmmt.2022.14.3.176

I. Olaru

{"title":"Silesian University of Technology, Gliwice, Poland","authors":"I. Olaru","doi":"10.54684/ijmmt.2022.14.3.176","DOIUrl":"https://doi.org/10.54684/ijmmt.2022.14.3.176","url":null,"abstract":"An efficient MQL system (Minimal Quantity Lubrification) ensures the proper cooling of the various moving parts, resulting in the cutting process on the machine tools. The introduction of MQL systems responds to the growing demand in the industry with a whole host of real benefits. The geometry of the nozzle influences the flow parameters of the coolant; these parameters can also be influenced by the nature of the fluid or liquids used. The nozzle of the cooling system has a convergent-divergent geometry, the dispersion of the fluid in the areas to be processed being better. A high temperature in the working area above a certain critical value can be harmful to the quality of the surface and can have some negative influences on the life of the cutting tool. MQL-type cooling systems combine different cooling fluids to achieve better cooling and lubrication of the cutting area. Following the simulations performed, the coolant speeds depend on the length of the analyzed nozzle, we can see that the speed has a lower value in the initial section of the nozzle which increases at the nozzle outlet. After exiting the convergence-divergence nozzle, the fluid jet velocity decreases in proportion to the fluid jet length, the simulation of these phenomena can optimize the geometry for the chosen purpose. The present paper aims to analyze the types of coolants and their correct choice, temperature control resulting from the cutting process is achieved due to the correct distribution of cooling fluids in the processing area, optimization can be achieved through computer simulation.","PeriodicalId":38009,"journal":{"name":"International Journal of Modern Manufacturing Technologies","volume":" ","pages":""},"PeriodicalIF":0.0,"publicationDate":"2022-12-20","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"49392610","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

引用次数: 5

MORPHOLOGICAL DETAILS OF STRAIN-INDUCED MARTENSITE IN COLD-ROLLED Cr – Ni STEEL Cr–Ni冷轧钢应变诱发马氏体的形态细节

International Journal of Modern Manufacturing Technologies Pub Date : 2022-12-20 DOI: 10.54684/ijmmt.2022.14.3.112

A. Kurc-Lisiecka

{"title":"MORPHOLOGICAL DETAILS OF STRAIN-INDUCED MARTENSITE IN COLD-ROLLED Cr – Ni STEEL","authors":"A. Kurc-Lisiecka","doi":"10.54684/ijmmt.2022.14.3.112","DOIUrl":"https://doi.org/10.54684/ijmmt.2022.14.3.112","url":null,"abstract":"\"The investigation presents the evolution of strain-induced martensite during cold rolling of AISI 304 stainless steel at 10% and 50% degree of deformation. The morphologies and characteristics of ’ martensite have been studied using optical-image analysis, scanning and transmission electron microscope. The influence of strain-induced martensite on mechanical properties and hardness of AISI 304 steel have been reported. Plastic deformation during the cold rolling of AISI 304 steel induces a martensitic transformation (γ→α’) in the whole range of applied deformation degree. The equiaxial grains of austenite containing annealing twins were observed within the microstructure of steel at delivery state. During the deformation process the shape of austenite grains was changed into long slim bands parallel to the rolling direction. Many shear bands and micro-twins were observed in the microstructure at large deformations degrees. The martensite, which was formed as a result of the transformation (γ→α’) induced by deformation, has a distinct influence on properties of the investigated steel grade. It was found that the effect of steel hardening is a result of a significant increase of the volume fraction of the ’-martensite in the structure. \"","PeriodicalId":38009,"journal":{"name":"International Journal of Modern Manufacturing Technologies","volume":" ","pages":""},"PeriodicalIF":0.0,"publicationDate":"2022-12-20","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"49472718","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

引用次数: 1

STUDY ON OPTIMIZING MATERIALS FOR 3D GRIPPER PRINTING 三维夹持打印材料优化研究

International Journal of Modern Manufacturing Technologies Pub Date : 2022-12-20 DOI: 10.54684/ijmmt.2022.14.2.174

Emilian Păduraru, C. Dumitraș, D. Chitariu, Florin Chifan

引用次数: 0

THE INFLUENCE OF THE THERMAL REGIME ON THE GUIDEWAYS OF THE MAIN ACTUATION OF A GANTRY TYPE CNC MACHINE 热状态对龙门型数控机床主作动机构导轨的影响

International Journal of Modern Manufacturing Technologies Pub Date : 2022-12-20 DOI: 10.54684/ijmmt.2022.14.2.181

L. Petrea, G. Stan, Cătălin Drob

引用次数: 0

"INCREASING THE POSITIONING ACCURACY OF THE FEED KINEMATIC LINKAGES OF CNC MACHINE TOOLS THROUGH THE CALIBRATION METHOD " 通过标定方法提高数控机床进给运动机构的定位精度

International Journal of Modern Manufacturing Technologies Pub Date : 2022-12-20 DOI: 10.54684/ijmmt.2022.14.2.245

A. Stoica, G. Stan, Cătălin Drob

{"title":"\"INCREASING THE POSITIONING ACCURACY OF THE FEED KINEMATIC LINKAGES OF CNC MACHINE TOOLS THROUGH THE CALIBRATION METHOD \"","authors":"A. Stoica, G. Stan, Cătălin Drob","doi":"10.54684/ijmmt.2022.14.2.245","DOIUrl":"https://doi.org/10.54684/ijmmt.2022.14.2.245","url":null,"abstract":"The accuracy of a CNC machine tool is one of the most important parameters that make the geometry and dimensions of the work pieces comply with the tolerance limits specified through the designer’s technical drawing. When a machine tool is handed over to the customer it is compliant in terms of the accuracy limits specified in the documentation but, after a time interval of usage, because of the wear of the components in relative motion and machine exploitation conditions. This work suggests an innovating method of testing the accuracy of a CNC machine tool by using the “calliper”, with a view to enhancing the positioning accuracy of the feed kinematic linkages. After designing and manufacturing this device, the measurement of the target points on the coordinate measuring machine is necessary, so that this device becomes a “calliper”. For inspecting the machine tool, the “calliper” is located on the machine table, being measured at the target points by means of the probe with the tactile shooter that belongs to the machine. The measurement results are stored and compared to the results of the measurements performed through the coordinate measuring machine. In function of the two measurements the related corrections of the errors will be done in the software of machine tool numerical control.","PeriodicalId":38009,"journal":{"name":"International Journal of Modern Manufacturing Technologies","volume":" ","pages":""},"PeriodicalIF":0.0,"publicationDate":"2022-12-20","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"46798763","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

引用次数: 0

CUSTOMISED INFILL PATERNS FOR STREGHTENED 3D PARTS 用于加固三维零件的定制填充板

International Journal of Modern Manufacturing Technologies Pub Date : 2022-12-20 DOI: 10.54684/ijmmt.2022.14.3.265

V. Teodor, R. Crăciun, G. Moroșanu

{"title":"CUSTOMISED INFILL PATERNS FOR STREGHTENED 3D PARTS","authors":"V. Teodor, R. Crăciun, G. Moroșanu","doi":"10.54684/ijmmt.2022.14.3.265","DOIUrl":"https://doi.org/10.54684/ijmmt.2022.14.3.265","url":null,"abstract":"The development of rapid prototyping technologies generates a strong concern for saving all types of materials while maintaining, or even increasing, the strength of 3d printed parts. One way to partially meet this requirement is to make models with a low degree of filling. However, the types of predefined filling structures, defined in the slicing programs, are relatively small in number, being based on repetitive patterns. In this paper it is proposed to make a specimen with a filling structure adapted to the expected stress that appear during operation. Model design can be done in any computer-aided design environment. The deformations of the modified specimen were compared with the deformations of some models with predefined filling structures, under the conditions of maintaining the same loads. This comparison allows to verify the strength of the specimen, under the conditions of using the same volume of material, compared to the models with predefined structure. In addition, conclusions can be drawn regarding the strength of various filling patterns and the time required to print the specimen. The favorable results create the premises of developing an algorithm that can allow the generation of some filling models optimized for different types of loads and eventually the possibility of applying the same concept of custom filling structure for other rapid prototyping technologies.","PeriodicalId":38009,"journal":{"name":"International Journal of Modern Manufacturing Technologies","volume":" ","pages":""},"PeriodicalIF":0.0,"publicationDate":"2022-12-20","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"47535087","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

引用次数: 0

"CONTROL OF SHIP FIN STABILIZERS BY A PID CONTROLLER: A NUMERICAL ANALYSIS " 舰船尾翼稳定器pid控制的数值分析

International Journal of Modern Manufacturing Technologies Pub Date : 2022-12-20 DOI: 10.54684/ijmmt.2022.14.2.40

D. Deleanu, C. Dumitrache, M. Turof

{"title":"\"CONTROL OF SHIP FIN STABILIZERS BY A PID CONTROLLER: A NUMERICAL ANALYSIS \"","authors":"D. Deleanu, C. Dumitrache, M. Turof","doi":"10.54684/ijmmt.2022.14.2.40","DOIUrl":"https://doi.org/10.54684/ijmmt.2022.14.2.40","url":null,"abstract":"The reduction of ship roll motion is important in order to prevent damage to cargo, to allow the crew to work efficiently and to provide comfort for the passengers. There are passive devices like bilge keels or anti – roll tanks and active devices like gyrostabilizer and stabilizing fins which are commonly used to generate an opposed moment to the wave and wind excitation roll moments in response to the command of a control system. The paper presents numerical results of using a Proportional - Integral – Derivative (PID) controller for damping the roll motion of a fishing boat equipped with a fin stabilizer system and sailing in regular waves. The nonlinear roll equation, which includes B1 type damping and quantic restoring, besides the wave excitation moment and moment generated by fins, was linearized for relative small roll angles. The role of PID controller was to generate the corrective roll moment through the controlled fins in order to stabilize the roll motion. The thresholds for the controller’s gains were determined using the Laplace transform and Routh – Hurwitz criterion. A simple but precise iterative scheme was used for the rapid integration of the system equations of motion in three cases: only proportional (P) component, proportional and derivative (PD) components and full PID controller. The numerical simulations have showed that all the analysed variants achieved roll reduction satisfactorily.","PeriodicalId":38009,"journal":{"name":"International Journal of Modern Manufacturing Technologies","volume":" ","pages":""},"PeriodicalIF":0.0,"publicationDate":"2022-12-20","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"48610391","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

引用次数: 0

PROPULSION THRUST FORCE CALCULATION WITH CAVITATION FOR AN UNDERWATER VEHICLE 考虑空化作用的水下航行器推进推力计算

International Journal of Modern Manufacturing Technologies Pub Date : 2022-12-20 DOI: 10.54684/ijmmt.2022.14.3.239

A. Sabau, Ion Serbanescu, R. Zăgan

{"title":"PROPULSION THRUST FORCE CALCULATION WITH CAVITATION FOR AN UNDERWATER VEHICLE","authors":"A. Sabau, Ion Serbanescu, R. Zăgan","doi":"10.54684/ijmmt.2022.14.3.239","DOIUrl":"https://doi.org/10.54684/ijmmt.2022.14.3.239","url":null,"abstract":"This paper aimed to evaluate the thrust force for a propeller taking into account cavitations, to analyze the dynamic and nautical characteristics of an ROV (Remotely Operated Vehicles). This approach is not a theoretical one, it also has a practical purpose to achieve high-performance propulsion systems with the lowest possible design costs. This is the purpose for which we want to create a viable and high-performance simulation model which allows optimization by numerical analysis, and in the end to make the prototype and perform measurements. The simulation is done in Ansys CFX and uses a 3D model for the propeller and duct of the T100 thruster produced by Blue Robotics. The simulation introduces the cavitation model from Ansys CFX, simplified Rayleigh-Plesset formulation, and we will perform analyses whit important improvements. Taking into account the results obtained in previous author work [1] and information from other scientifical papers, we will test fine discretization mesh in rotor zone to solve the cavitation. Increased resolution for the numerical scheme, two-order schemes for pressure momentum, and turbulence equations. Replacement of k-epsilon turbulence model whit a more performant k-omega model. The obtained results will be analyzed and compared with the experimental measurements.","PeriodicalId":38009,"journal":{"name":"International Journal of Modern Manufacturing Technologies","volume":" ","pages":""},"PeriodicalIF":0.0,"publicationDate":"2022-12-20","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"43042257","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

引用次数: 0

"ACOUSTIC AND ELASTIC PROPERTIES OF WOOD FOR VIOLIN SOUND POST " “小提琴音箱用木材的声学和弹性特性”

International Journal of Modern Manufacturing Technologies Pub Date : 2022-12-20 DOI: 10.54684/ijmmt.2022.14.3.260

M. Stanciu, A. Savin, G. Dobrescu

引用次数: 0