O. Montoya, W. Gil-González, F. Serra, C. D. Angelo, J. C. Hernández
{"title":"Extended Feedback Linearization Control for Voltage Regulation in a Buck Converter with an Unknown Resistive Load","authors":"O. Montoya, W. Gil-González, F. Serra, C. D. Angelo, J. C. Hernández","doi":"10.1109/LASCAS56464.2023.10108198","DOIUrl":"https://doi.org/10.1109/LASCAS56464.2023.10108198","url":null,"abstract":"This paper deals with the control problem in a buck converter while considering an unknown resistive load. The control design is based on extended feedback linearization (EFL) theory, which allows finding a general control law equivalent to the approximated feedback control method when the state variables are at the desired equilibrium point. The main advantage of an EFL controller is that the final feedback gains are independent of the converter parameters if and only if all the capacitances and inductances of the converter are perfectly known. To define the resistive load value, the inverse and invariance estimation method was employed, aiming to ensure the exponential convergence of the real resistive value. Numerical comparisons with an integral-action, passivity-based control design demonstrate the effectiveness of the proposed EFL approach. All numerical simulations were conducted in the PLECs simulation tool of the MATLAB/Simulink environment.","PeriodicalId":373783,"journal":{"name":"2023 IEEE 14th Latin America Symposium on Circuits and Systems (LASCAS)","volume":"1 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2023-02-27","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"129376161","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
R. Ascázubi, F. R. Palomo, Victoria Navarrete-Larive, J. Q. Molina, M. Cortés-Giraldo, J. A. Pavón-Rodriguez
{"title":"Neutron Irradiation of Si-PIN Diodes and Laser Injection Equivalence","authors":"R. Ascázubi, F. R. Palomo, Victoria Navarrete-Larive, J. Q. Molina, M. Cortés-Giraldo, J. A. Pavón-Rodriguez","doi":"10.1109/LASCAS56464.2023.10108138","DOIUrl":"https://doi.org/10.1109/LASCAS56464.2023.10108138","url":null,"abstract":"Neutron irradiation of Silicon-PIN diodes has been performed at the n_TOF facility at CERN. Transients are collected and compared to those generated by ultrafast laser. Deposited charge is characterized as a function of the neutron energy.","PeriodicalId":373783,"journal":{"name":"2023 IEEE 14th Latin America Symposium on Circuits and Systems (LASCAS)","volume":"6 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2023-02-27","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"124505469","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Complexity and Coding Efficiency Assessment of AOMedia Video 1","authors":"Ícaro Siqueira, G. Corrêa, M. Grellert","doi":"10.1109/LASCAS56464.2023.10108213","DOIUrl":"https://doi.org/10.1109/LASCAS56464.2023.10108213","url":null,"abstract":"AOMedia Video 1 (AV1) achieves high compression rates through the use of novel complex tools and flexible frame partitioning structures. Understanding which are the most time-consuming tools and techniques is essential for proposing energy-aware VLSI designs that will allow a wide deployment of AV1 codecs in different devices. This work presents a detailed assessment of AV1 video coding divided into four analyses: (i) a complexity profiling of baseline AV1 tools, (ii) a complexity analysis of the AV1 block partitioning decision, (iii) an analysis on the fast partitioning heuristics implemented in the AV1 reference encoder, and (iv) an analysis on the effects of limited block partitioning. The analyses point out the main sources of complexity in AV1, discussing potential strategies that can be followed for complexity and energy consumption reduction.","PeriodicalId":373783,"journal":{"name":"2023 IEEE 14th Latin America Symposium on Circuits and Systems (LASCAS)","volume":"22 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2023-02-27","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"117062092","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Tailize C. De-Oliveira, Raul P. De Oliveira, A. Girardi, Paulo César Comassetto de Aguirre, L. Severo
{"title":"An RF-EH Employing Controlled-Impedance Matching for Ultra-Low Voltage Batteryless Devices","authors":"Tailize C. De-Oliveira, Raul P. De Oliveira, A. Girardi, Paulo César Comassetto de Aguirre, L. Severo","doi":"10.1109/LASCAS56464.2023.10108099","DOIUrl":"https://doi.org/10.1109/LASCAS56464.2023.10108099","url":null,"abstract":"Harvesting energy from the existing RF signals present in the environment is a key strategy to power ultra-low voltage (ULV) devices. Such harvesters should present high power conversion efficiency and it is directly affected by the antenna-harvester impedance matching. This paper introduces an RF-EH system with an adapted and digitally-controlled impedance matching approach for batteryless devices. The proposed circuit is designed on a 180-nm CMOS process and is capable of generating a stable supply voltage of 0.4- V from a frequency of 915 MHz while achieving a sensitivity of -19.l6-dBm and 66% power efficiency.","PeriodicalId":373783,"journal":{"name":"2023 IEEE 14th Latin America Symposium on Circuits and Systems (LASCAS)","volume":"10 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2023-02-27","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"125794787","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Analysis of AV1 Arithmetic Decoder Design Space with a Novel Multi-Boolean Approach","authors":"Jiovana Sousa Gomes, Tulio Pereira Bitencourt, S. Bampi, Fábio Luís Livi Ramos","doi":"10.1109/LASCAS56464.2023.10108168","DOIUrl":"https://doi.org/10.1109/LASCAS56464.2023.10108168","url":null,"abstract":"Video processing is a constant necessity given the wide consumption of video content in nowadays society. Due to that fact, video coding formats or standards are suitable tools to address the huge data amount generated by them. In this context, the AV1 format is a recent alternative, being able to efficiently encode video, and intended to be royalty-free when compared to its competitors. The first step of the decoding is the arithmetic decoder, which is composed of two types of symbols' alphabets, namely CDF and Boolean. To improve throughput without major degradation in the overall performance, an option is to process multiple Boolean symbols in parallel since this kind of alphabet is simpler to be handled. Therefore, this paper introduces a novel Multi-Boolean Approach for the AV1 Arithmetic Decoder design. An analysis using multiple in-parallel Boolean symbols is performed within different hardware architectures from the literature. In conclusion, the best trade-off choice is pointed out to be the two Boolean in-parallel processing, tethered to a multi-cycle AV1 arithmetic decoder circuit.","PeriodicalId":373783,"journal":{"name":"2023 IEEE 14th Latin America Symposium on Circuits and Systems (LASCAS)","volume":"39 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2023-02-27","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"132936078","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Marcello M. Muñoz, Denis Maass, Murilo R. Perleberg, L. Agostini, M. Porto
{"title":"Hardware Design for the Affine Motion Compensation of the VVC Standard","authors":"Marcello M. Muñoz, Denis Maass, Murilo R. Perleberg, L. Agostini, M. Porto","doi":"10.1109/LASCAS56464.2023.10108350","DOIUrl":"https://doi.org/10.1109/LASCAS56464.2023.10108350","url":null,"abstract":"The Affine Motion Estimation (AME) of the Versatile Video Coding (VVC) standard is a high-complexity task. The AME requires Affine Motion Compensation (MC) to be performed for $4times 4$ subblocks, where the Motion Vector relative to the $4times 4$ subblock is adopted to define which of the 15 6-tap interpolation filters should be used to interpolate each sample of the $4times 4$ subblock. This work presents a dedicated hardware implementation for the Affine MC of the VVC standard, where the ASIC synthesis results for this architecture for TSMC 40nm standard cells show an area requirement of 97.5k gates and power dissipation of 11.1mW when targeting the processing of 4K Ultra-High Definition (UHD) video at a frequency of 808MHz. To the best of the author's knowledge, this work presents the first hardware implementation of the VVC Affine MC in the literature.","PeriodicalId":373783,"journal":{"name":"2023 IEEE 14th Latin America Symposium on Circuits and Systems (LASCAS)","volume":"1 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2023-02-27","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"129171399","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"The Fault-tolerant Single-FPGA Systems with a Self-repair Reconfiguration Controller","authors":"R. Panek, Jakub Lojda","doi":"10.1109/LASCAS56464.2023.10108372","DOIUrl":"https://doi.org/10.1109/LASCAS56464.2023.10108372","url":null,"abstract":"Fault tolerance in electronic systems is essential in harsh environments such as space. However, FPGAs that can be used to accelerate various computations are prone to configuration memory faults that determine their function. Repairing these faults is essential to increase system resilience. For this purpose, the partial dynamic reconfiguration controller is necessary. We force the controller to be on the same FPGA with a payload circuit to design a comprehensive system inside one FPGA. We create and thoroughly test a new reconfiguration controller to increase the system's resiliency with the ability to repair itself during its own operation. For this purpose, the FPGA controller is in coarse-grained triple modular redundancy to be able to recover despite the failure of any of its modules. The proposed controller has been tested to increase the resilience of circuits from a set of benchmark circuits. The entire system with the controller was evaluated on an actual FPGA, where faults were injected directly into the configuration memory of this FPGA. Reliability parameters are measured by a platform designed for this purpose, partly directly on the tested FPGA. As we can see from the results, the mean time to failure has been increased by up to 69% compared to a system equipped with only triple modular redundancy with a reasonable amount of hardware resources. The competitive solution brings only a 42% improvement in resilience with similar parameters.","PeriodicalId":373783,"journal":{"name":"2023 IEEE 14th Latin America Symposium on Circuits and Systems (LASCAS)","volume":"190 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2023-02-27","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"116516664","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Design and evaluation of CNN hardware accelerator designs for in-seat passenger anomaly detection","authors":"Avik Bhatnagar, Pratyush Nandi, Madhav Rao","doi":"10.1109/LASCAS56464.2023.10108325","DOIUrl":"https://doi.org/10.1109/LASCAS56464.2023.10108325","url":null,"abstract":"Passenger distress detection and its notification to the connected ecosystem is of high priority to offer timely help and rescue their lives. Today's Artificial Intelligent (AI) models are capable to extract temporal and spectral features needed to autonomously recognize the passenger state using sensory signals. The work proposes convolutional neural network (CNN) based hardware accelerator design to detect passenger anomaly state, based on the digitized signals acquired from 15 spatially distributed cushion embedded pressure-sensitive-conductive (PSC) sensors. The design was aimed to work successfully on the seated passenger inside the vehicle for three different vehicle conditions including stationary vehicle, vehicle moving on well maintained plain road, and vehicle running on a sub-standard road. The hardware CNN was designed and evaluated for five different configurations by incorporating the reused processing elements that are programmed with the available resources of the targeted FPGA. All the hardware designs were evaluated with respect to power, throughput, resources utilized, and inference delay. The hardware accelerator designed FPGA system exhibited 64.70X, and 22.57X faster inference when compared with other embedded computing implementations including Raspberry Pi, and single core processor in the ZYNQ board.","PeriodicalId":373783,"journal":{"name":"2023 IEEE 14th Latin America Symposium on Circuits and Systems (LASCAS)","volume":"16 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2023-02-27","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"121190865","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
F. Serra, W. Gil-González, O. Montoya, J. C. Hernández
{"title":"Voltage Regulation in a Buck Converter for an Unknown CPL: An Extended Feedback Control Design","authors":"F. Serra, W. Gil-González, O. Montoya, J. C. Hernández","doi":"10.1109/LASCAS56464.2023.10108291","DOIUrl":"https://doi.org/10.1109/LASCAS56464.2023.10108291","url":null,"abstract":"This paper deals with the problem of the output voltage regulation in a buck converter for an unknown constant power terminal (CPL) which generates a nonlinear dynamical model that requires an efficient control technique. An extended feedback linearization (EFL) approach is proposed to regulate the voltage provided to the CPL. The main characteristic of the EFL control is that it is based on the linearization of the dynamical model around the desired operative point, making it equivalent in this point to the classical approximated feedback control design. However, the EFL, even if designed with the linearized model, provides a nonlinear feedback control law that extends the action area near the operating point with better performance than linear controllers. To estimate the unknown load value, the estimation technique known as the inverse and invariant approach is applied with the main advantage that the load estimation has exponential convergence to the real value of the CPL. Numerical simulations in the PLECs software for MATLAB/Simulink reveal the effectiveness of the proposed EFL control compared to the exact feedback linearization controller.","PeriodicalId":373783,"journal":{"name":"2023 IEEE 14th Latin America Symposium on Circuits and Systems (LASCAS)","volume":"66 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2023-02-27","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"114131229","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Jorge L. Gonzalez, Diego Vázquez, R. Moreno, JUAN CARLOS MERLANO DUNCAN, O. K. Jensen, S. Chatzinotas, B. Ottersten
{"title":"Stacked-Cascode Current Steering Architecture for Gallium Nitride Variable-Gain LNAs","authors":"Jorge L. Gonzalez, Diego Vázquez, R. Moreno, JUAN CARLOS MERLANO DUNCAN, O. K. Jensen, S. Chatzinotas, B. Ottersten","doi":"10.1109/LASCAS56464.2023.10108284","DOIUrl":"https://doi.org/10.1109/LASCAS56464.2023.10108284","url":null,"abstract":"This work presents a gallium nitride (GaN) variable-gain low-noise amplifier (VGLNA) using for the first time a stacked-cascode current steering architecture. The simulation results show that an extensive gain variation range can be achieved without degrading other key performance parameters. This technique significantly outperforms the capabilities of VGLNAs based on controlling the biasing voltage of the amplifying transistor, which is limited by a notable input impedance mismatching.","PeriodicalId":373783,"journal":{"name":"2023 IEEE 14th Latin America Symposium on Circuits and Systems (LASCAS)","volume":"3 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2023-02-27","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"114142268","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}