Eduardo Holguin, L. Prócel, A. Brenes, A. Vladimirescu, L. Trojman
{"title":"Analysis and Design of a Self-Powered VEH System Based on ULP Comparator","authors":"Eduardo Holguin, L. Prócel, A. Brenes, A. Vladimirescu, L. Trojman","doi":"10.1109/LASCAS56464.2023.10108276","DOIUrl":"https://doi.org/10.1109/LASCAS56464.2023.10108276","url":null,"abstract":"The study conducted addresses a vibrational energy harvester (VEH) based on a microelectromechanical system (MEMS) with a gap-closing electrostatic resonator. The harvester consists of a charge pump system in the form of a rectifier with feedback with an ultra-low-power (ULP) comparator as output. The latter regulates the harvesting cycle of the system using a bulk-driven topology. The complete circuit is implemented in a 180 nm silicon technology. The designed energy harvester generates an output power of 65.45nW at an acceleration of $boldsymbol{0.35m/s^{2}}$ and a frequency of 53.5Hz. The implemented circuit is supplied with a voltage of one volt and has an average power consumption of 7nW in the operating range. All simulations were conducted using Cadence Virtuoso.","PeriodicalId":373783,"journal":{"name":"2023 IEEE 14th Latin America Symposium on Circuits and Systems (LASCAS)","volume":"194 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2023-02-27","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"125860979","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Dayana A. Pino-Monroy, P. Scheer, M. Bouchoucha, C. Galup-Montoro, M. Barragán, J. Fournier, A. Cathelin, S. Bourdel
{"title":"Design-oriented model for short-channel MOS transistors based on inversion charge","authors":"Dayana A. Pino-Monroy, P. Scheer, M. Bouchoucha, C. Galup-Montoro, M. Barragán, J. Fournier, A. Cathelin, S. Bourdel","doi":"10.1109/LASCAS56464.2023.10108277","DOIUrl":"https://doi.org/10.1109/LASCAS56464.2023.10108277","url":null,"abstract":"This paper presents a design-oriented MOS transistor model that uses only 7 parameters for analytically describing the MOSFET behavior. Based on the inversion charge, it accounts for the most relevant short-channel effects in advanced technologies. The model provides analytical relations for the transconductances, output conductance, and nonlinearities of the transistor for simple analytical circuit design. The model is validated using the 28nm FD-SOI technology from STMicroelectronics and is compared to a state-of-the-art 4-parameter model to demonstrate the advantages of the proposed model for RF/analog design purposes.","PeriodicalId":373783,"journal":{"name":"2023 IEEE 14th Latin America Symposium on Circuits and Systems (LASCAS)","volume":"37 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2023-02-27","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"115489089","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Poliana A. C. Oliveira, Renan A. Marks, João V. C. Teixeira, Marcos V. Guterres, O. V. Neto
{"title":"DNAr-Analog: A Library With a Multiplexer to Easily Design, Program, and Simulate Dsd Analog Circuits","authors":"Poliana A. C. Oliveira, Renan A. Marks, João V. C. Teixeira, Marcos V. Guterres, O. V. Neto","doi":"10.1109/LASCAS56464.2023.10108135","DOIUrl":"https://doi.org/10.1109/LASCAS56464.2023.10108135","url":null,"abstract":"Programmable molecular devices are an opportunity to develop applications in biological systems, a universe still hard to access by other conventional technologies. The DNA strand displacement (DSD) mechanism offers a way to design circuits by manipulating DNA fragments. Recent works in this area highlight analog gate/unit design. Here we propose the DNAr-analog library, a set of analog gates/units concentrated on a single platform. We aim to implement large DNA circuits in a more flexible, modular, extensible, and productive way. In addition, we also propose an analog multiplexer unit and present the simulation of two circuit examples in DNAr. They feature dozens of chemical reactions converted quickly by the simulator into hundreds of DSD reactions. The advantage is that it does not need to be manually specified. We hope this facilitates the initial design of complex DNA circuits and systems.","PeriodicalId":373783,"journal":{"name":"2023 IEEE 14th Latin America Symposium on Circuits and Systems (LASCAS)","volume":"343 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2023-02-27","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"122642845","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
M. D. da Rosa, P. D. da Costa, Guilherme Paim, E. D. da Costa, Rafael I. Soares, S. Bampi
{"title":"An Energy-Efficient StEFCal VLSI Design with Approximate Squarer and Divider Units","authors":"M. D. da Rosa, P. D. da Costa, Guilherme Paim, E. D. da Costa, Rafael I. Soares, S. Bampi","doi":"10.1109/LASCAS56464.2023.10108306","DOIUrl":"https://doi.org/10.1109/LASCAS56464.2023.10108306","url":null,"abstract":"Approximate computing attempts to maximize area and energy savings for a trade-off between quality and efficiency. This paper investigates the approximate squarer and divider units in the calibration procedure for radio astronomy called StEFCal (Statistically Efficient and Fast Calibration). The StEFCal circuit uses two squarer units from the literature, i.e., radix-4 (AxRSU) and SquASH, and iterative-based Newton-Raphson (NR) and Goldschmid (GLD) dividers. We demonstrate the efficiency of StEFCal using the approximate arithmetic operators from the Pareto-optimal that show the area- and power-quality trade-off. The results show that using the AxRSU combined with the NR divider improves the Mean Square Error (MSE) by 4.24%, with 58x more energy saving than the state-of-the-art.","PeriodicalId":373783,"journal":{"name":"2023 IEEE 14th Latin America Symposium on Circuits and Systems (LASCAS)","volume":"254 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2023-02-27","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"114516504","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Exploring Multi-Parameter Optimization of Automated HLS Tools and the Difficulty of Setting Complex Constraints","authors":"Noam Shalom, I. Levi","doi":"10.1109/LASCAS56464.2023.10108151","DOIUrl":"https://doi.org/10.1109/LASCAS56464.2023.10108151","url":null,"abstract":"In standard design-processes of electronic systems much effort and expertise is required from engineers to produce a hardware description of the system and from this abstraction point, automation and synthesis tools bring the design to the gate level. In recent years, automatic tools have been developed whose purpose is to translate high-level languages directly into hardware language and thus to automatically realize a system up to the level of logic gates efficiently. The automatic tools strive to be as optimal as possible according to the needs of the application, but it appears in the article that there are concrete difficulties for the tools to do this optimally and that the intervention of the designer is still needed to achieve best results. In the paper we investigate and present how such tools work, what results are reached when simple symmetric and asymmetric structures are provided as inputs. And finally, we show how sub-optimal results are achieved either when vast freedom is given to the tool with multiple optimization parameters, and when complex optimization metrics are targeted, a task such tools are not specifically designed to solve. Even though, we posh forward that when numerous optimization pragmas are available by the tools, and as designs and optimization targets get more complex, such situations are quite inevitable. We highlight that additional flexibility is still needed to set complex constraints by the tools and that more automation is required. We demonstrate, on a simple example, gradually increasing complexity, towards an FFT processor (which generalizes many use cases), that significant gains can be achieved for complex structures needed in modern computation. The proposed automation is directed to aid the tools and the designer to better reach optimal implementations.","PeriodicalId":373783,"journal":{"name":"2023 IEEE 14th Latin America Symposium on Circuits and Systems (LASCAS)","volume":"33 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2023-02-27","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"128387355","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Deep Learning-Based Receiver Energy Prediction in Energy Harvesting Wireless Sensor Network","authors":"El-hadi Zazoua, W. Ajib, M. Boukadoum","doi":"10.1109/LASCAS56464.2023.10108110","DOIUrl":"https://doi.org/10.1109/LASCAS56464.2023.10108110","url":null,"abstract":"Predicting the available energy at a receiver node in energy-harvesting wireless sensor networks may substantially improve data transmission and routing performances. In this work, we survey the state-of-the-art to predict the next node's energy in a communication path using probability and older machine learning techniques and propose and evaluate three deep learning alternatives. Our simulations with real-world energy harvesting data show that our approach provides better prediction accuracy and considerably improves the network performance for data packet loss and transmission delay.","PeriodicalId":373783,"journal":{"name":"2023 IEEE 14th Latin America Symposium on Circuits and Systems (LASCAS)","volume":"61 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2023-02-27","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"124653559","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Compact Time-Based Sensor-to-Digital Converters in Skywater 130nm Open-Source Technology","authors":"Jorge Marin, I. Vourkas, C. Rojas, J. Gak","doi":"10.1109/LASCAS56464.2023.10108228","DOIUrl":"https://doi.org/10.1109/LASCAS56464.2023.10108228","url":null,"abstract":"This paper presents two implementations of a highly-digital time-based sensor-to-digital converter (SDC) targeted for high resolution, low power and ultra-compact circuit footprint. The core structure uses the phase-locked loop (PLL)-based architecture, which leads to a highly linear transfer function that enables a simple calibration scheme. The SDCs have been designed using the Skywater 130nm technology and open-source design tools. In the first implementation, the converter has been applied to a capacitive sensor interface application by including the sensor as a capacitive load in a ring oscillator node. The simulated SDC converts capacitive values in a range between $8pF$ and $8.3pF$. Secondly, a novel resistive SDC for temperature measurements between −40° $C$ and $155^{circ}C$ has been implemented in the same technology. The full-system circuit simulation of the resistive SDC shows a SQNR of $12.9ENOB$ for a $6.2mu s$ sampling period and a power consumption of $1.7mW$, using only $0.008mm^{2}$ of silicon area.","PeriodicalId":373783,"journal":{"name":"2023 IEEE 14th Latin America Symposium on Circuits and Systems (LASCAS)","volume":"1 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2023-02-27","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"129285375","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
R. Domanski, William Kolodziejski, Wagner Penny, M. Porto, B. Zatt, L. Agostini
{"title":"High-Throughput and Multiplierless Hardware Design for the AV1 Fractional Motion Estimation","authors":"R. Domanski, William Kolodziejski, Wagner Penny, M. Porto, B. Zatt, L. Agostini","doi":"10.1109/LASCAS56464.2023.10108378","DOIUrl":"https://doi.org/10.1109/LASCAS56464.2023.10108378","url":null,"abstract":"AV1 video encoder is one of the newest codecs in the market and it was developed by the Alliance for Open Media team. This work is presented a high throughput hardware design for the AV1 Fractional Motion Estimation (FME). This designed architecture was synthesized for TSMC 40 nm standard cell technology and can process 4K UHD videos at 30 fps with a power dissipation of 246.9 mW and with an area of 389.6 Kgates. So far, the authors have not found any other published work regarding dedicated hardware designs for the complete AV1 FME.","PeriodicalId":373783,"journal":{"name":"2023 IEEE 14th Latin America Symposium on Circuits and Systems (LASCAS)","volume":"149 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2023-02-27","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"123362894","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
D. L. Oliveira, Marcus H. Victor, Luiz C. Moreira, Felipe F. Nascimento
{"title":"Design of Quasi Delay Insensitive Combinational Circuits Based on Optimized DIMS","authors":"D. L. Oliveira, Marcus H. Victor, Luiz C. Moreira, Felipe F. Nascimento","doi":"10.1109/LASCAS56464.2023.10108335","DOIUrl":"https://doi.org/10.1109/LASCAS56464.2023.10108335","url":null,"abstract":"While the clock signal is challenging in synchronous circuit design, asynchronous circuits are promising as they eliminate such a signal. An essential class of asynchronous circuits due to simplified timing analysis and being robust to PVT variations (process, supply voltage, temperature) is called Quasi Delay Insensitive (QDI). However, QDI circuits have high hardware increases due to signal coding, which uses delay-insensitive code. This paper proposes extensions to methods called NCL_D and RC that are based on the DIMS style and synthesize QDI combinatorial circuits. These extensions propose three optimized DIMS styles aimed at hardware reduction. The extensions proved promising for a set of eight examples compared with the NCL_D and RC methods. Our proposal obtained an average reduction of up to 51.4% in the estimated number of transistors.","PeriodicalId":373783,"journal":{"name":"2023 IEEE 14th Latin America Symposium on Circuits and Systems (LASCAS)","volume":"466 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2023-02-27","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"123655988","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
R. H. G. Chacón, E. G. Carvalho, J. L. Emeri, Ângela A. dos Santos, P. C. Secheusk, J. A. Diniz, S. Finco
{"title":"A Radiation Hardened Smart Power Switch Based on SOI Technology","authors":"R. H. G. Chacón, E. G. Carvalho, J. L. Emeri, Ângela A. dos Santos, P. C. Secheusk, J. A. Diniz, S. Finco","doi":"10.1109/LASCAS56464.2023.10108134","DOIUrl":"https://doi.org/10.1109/LASCAS56464.2023.10108134","url":null,"abstract":"Two smart power switches were designed with the control circuit and the power transistor implemented in 0.6 μm Silicon on Insulator (SOI) technology. One version was implemented with standard transistors and the other with Radiation Hardened by Design (RHBD) techniques. These protection devices are used as current limiting circuits in power distribution systems. The short-circuit peak current was eliminated by adding an inductor in the power path and optimizing the frequency response of the system. The functional validation of the proposed circuits was carried out through simulations and test results.","PeriodicalId":373783,"journal":{"name":"2023 IEEE 14th Latin America Symposium on Circuits and Systems (LASCAS)","volume":"70 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2023-02-27","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"121936070","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}