{"title":"Small Size Steel Catenary Riser S-Lay Installation With Flexible Joint as 2nd End: Difficulties and Solutions","authors":"Songan Liu, Yongjun Du, Wentai Yu","doi":"10.1115/omae2022-79231","DOIUrl":"https://doi.org/10.1115/omae2022-79231","url":null,"abstract":"\u0000 S-lay installation of a 6-inch small-sized SCR with flexible joint assembly in the 2nd end is investigated in this paper. Due to the huge difference in external dimensions, weights and bend stiffnesses between the riser pipe and the flexible joint, passing through the S-lay vessel stinger of the flexible joint assembly poses a big challenge to the strength integrity of the overbend section of the SCR, especially the steel pipe at the connection with the flexible joint body. This paper summarizes the engineering approach and FE analysis work that were carried out in order to reduce the maximum strain in the critical riser overbend section. These engineering approach options include design of a long tapered stress joint type shroud, an extended upper shroud, or an installation aid in large diameters, to facilitate installation of flexible joint assembly travelling along the stinger. The latter approach is selected for detailed design which lays the engineering groundwork for successful pre-laid operation of the 6-inch SCR with flexible joint.","PeriodicalId":367331,"journal":{"name":"Volume 3: Materials Technology; Pipelines, Risers, and Subsea Systems","volume":"1 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2022-06-05","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"131171226","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Alan Roy, T. Sriskandarajah, Suwarno Gunawan, P. Ragupathy, G. Roberts, Yasin Kassim, Markus Cederfeldt
{"title":"Methodology for Installation of Under-Straight Pipe for Lateral Buckling Mitigation","authors":"Alan Roy, T. Sriskandarajah, Suwarno Gunawan, P. Ragupathy, G. Roberts, Yasin Kassim, Markus Cederfeldt","doi":"10.1115/omae2022-79862","DOIUrl":"https://doi.org/10.1115/omae2022-79862","url":null,"abstract":"\u0000 The residual curvature (RC) method has been implemented by Subsea 7 for lateral buckling mitigation on various projects in recent years. The method involves deploying short sections of under-straight pipe in the catenary from a reel-lay vessel. The objective of this paper is to present RC results on bending moment and curvature and to show how these results can be combined with those from dynamic Orcaflex runs to predict the allowable sea-state for installation.\u0000 ABAQUS models to simulate the reeling/unreeling/straightening procedure on one of Subsea 7’s reel-lay vessels are presented, together with a description of the settings adjustment to achieve under-straight pipe with a prescribed level of residual plastic strain. These models describe the pipe profile on the reel, free-span, aligner, passage through the straightener and finally within the catenary to the seabed. The model is used to simulate the deployment of an RC section and to quantify its tendency to rotate in the sag-bend. The dynamic loads are captured by running an equivalent RC section model in Orcaflex.\u0000 Results for installation of a typical 14″ × 18″ pipe-in-pipe (PIP) are presented in 115m water depth (WD). Plots showing the spatial distribution of the bending moment and curvature of the RC section at various time increments within the catenary are provided. Attention is focused on the sag-bend. Stress-strain hysteresis loops are presented showing the multiple bending cycles experienced by the RC section from initial spooling-on until eventual deployment on the seabed.\u0000 The impact that the RC length, residual plastic strain and ramp angle has on the bending moment/curvature is discussed. Orcaflex results are presented which show dynamic change in curvature at the sag-bend over a typical three-hour interval due to vessel motion. The most characteristic dynamic load (Ref. /15/) on the RC section is calculated to establish the loading envelope seen in the sag-bend region. Checks are also undertaken at other locations to ensure that the dynamic loads are not introducing any additional residual plastic strain in the RC section.\u0000 The maximum bending moment seen by the RC section in the sagbend has an important bearing on the allowable sea-state for installation. The presented methodology for calculating the allowable sea-state (combining results of static and dynamic simulations) is a novel feature in the present work.","PeriodicalId":367331,"journal":{"name":"Volume 3: Materials Technology; Pipelines, Risers, and Subsea Systems","volume":"10 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2022-06-05","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"116332741","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
R. Hejazi, A. Grime, I. Milne, Phil Watson, Elizabeth White, A. Mariani, Max Lanoëllë
{"title":"A Data-Driven Framework for Fatigue Monitoring of Operating Flexible Risers","authors":"R. Hejazi, A. Grime, I. Milne, Phil Watson, Elizabeth White, A. Mariani, Max Lanoëllë","doi":"10.1115/omae2022-78017","DOIUrl":"https://doi.org/10.1115/omae2022-78017","url":null,"abstract":"\u0000 An accurate estimation of riser fatigue life plays a critical role in the efficient structural integrity management of operating flexible risers. A more reliable fatigue life estimate could, for example, enable life extension for aging flexible risers or facilitate the use of a more targeted intervention program. This paper introduces a data-centric paradigm for the fatigue monitoring of flexible risers which uses measured host vessel motion data as part of the riser global response analysis. The performance of this method is assessed by comparison with the conventional analysis method, which uses a condensed wave scatter diagram combined with vessel motion transfer functions to assess global response.\u0000 In the study, Python packages Scipy and Pandas are used to process raw wave and motion data obtained from wave measuring buoys and sensors located on the host vessel, respectively, to obtain the input load data, and non-linear time-domain analysis is used to calculate the global riser response due to both irregular waves and the measured motions. Tensions and curvatures obtained from the global riser response analysis form the input to a local stress analysis, which uses a proprietary software tool to estimate the stress response at the tensile and pressure armours. The output is then combined with a rainflow cycle counting technique and an S-N curve approach to perform the local fatigue assessment at the riser critical points.\u0000 This paper compares the predicted and measured key input parameters (such as vessel heading, motions etc.) that affect the estimated fatigue life of a representative flexible riser connected to an operating Floating, Process, Storage and Offloading (FPSO) host vessel. Finally, the paper provides practical recommendations for using measured host-vessel motion data as part of a rigorous fatigue monitoring of connected flexible risers.","PeriodicalId":367331,"journal":{"name":"Volume 3: Materials Technology; Pipelines, Risers, and Subsea Systems","volume":"3 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2022-06-05","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"131594613","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Rationale for NORSOK U-001 5th Edition Revision of Static and Cyclic Subsea Wellhead Loads","authors":"H. Holden, A. Muff, L. Reinås","doi":"10.1115/omae2022-81380","DOIUrl":"https://doi.org/10.1115/omae2022-81380","url":null,"abstract":"\u0000 NORSOK U-001 is a Norwegian national standard with requirements and recommendations that are supplementary to the ISO 13628 series of standards. NORSOK U-001 4th edition was issued in 2015 and carried a significant revision of design drilling riser loads applicable to subsea structures and well equipment. These maximum wellhead design loads were based on an analytical study followed by verification efforts indicating a shallow water under estimation bias of ULS and ALS design loads and overestimation bias of FLS design loads. As for cyclic design wellhead loads the NORSOK U-001 4th edition included informative design load histograms classified by BOP weight and water depth classes. As a part of development of NORSOK U-001 5th edition, a new wellhead load study has been performed to establish normative maximum and cyclic design loads for subsea wells.\u0000 The objective of this paper is threefold; first to present the analysis methodology employed and explain how loads have been established. The analysis work included more than 60 000 dynamic global riser simulations of marine risers from 5 different semi-submersible drilling rigs at water depths from 80 to 1000 m. Secondly, to explain how design loads have been extracted from these results for the upcoming 5th edition. A water depth reclassification was carried out with the intent to better cater for the shallow water bias from the 4th edition. Normative cyclic loads are based on a normalized load histogram scalable by a cyclic design load value (ΔMo) determined by water depth and operational mode. Finally, to outline quantified advice on maximum and cyclic load reduction potential that can be extracted from the underlying studies.","PeriodicalId":367331,"journal":{"name":"Volume 3: Materials Technology; Pipelines, Risers, and Subsea Systems","volume":"15 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2022-06-05","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"125360623","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
T. Griffiths, S. Draper, Liang Cheng, H. An, Marie-Lise Schläppy, F. Tong, A. Fogliani, Wacek Lipski, C. Spradbery, Yunfei Teng, D. White, D. Coles, Stuart Noble, Siobhan Doole, Fraser Johnson
{"title":"New Design Methods for Subsea Power Cables Are Helping the Global Marine Renewable Energy Industry Lower Costs and Improve Reliability","authors":"T. Griffiths, S. Draper, Liang Cheng, H. An, Marie-Lise Schläppy, F. Tong, A. Fogliani, Wacek Lipski, C. Spradbery, Yunfei Teng, D. White, D. Coles, Stuart Noble, Siobhan Doole, Fraser Johnson","doi":"10.1115/omae2022-80172","DOIUrl":"https://doi.org/10.1115/omae2022-80172","url":null,"abstract":"\u0000 University of Western Australia’s Oceans Graduate School to transform the design methods used to analyse the on-bottom stability of subsea power cables. These cables form the vital connection enabling renewable energy to be reliably and cost-effectively transported from the source to the consumer — whether the collection device at the end of the line is wave, tidal, fixed or floating wind. These novel design methods are equally applicable to umbilicals and other small diameter pipelines. Existing oil and gas pipeline codes overlook much of the physics that is relevant to small diameter pipes and cables. The new research has unlocked significant improvements through new laboratory, numerical and field observational analysis and modelling. The results of this research are presently being incorporated into new design guidance, including the draft British Standards Institute BS 10009 being developed under PEL 114 technical committee guidance.\u0000 This paper provides a summary of the research together with observations and lessons learnt in the application of these new design methods to over 7.4 GW of new offshore wind and other renewable energy cables. Given that as at 2020 the global grid-connected total offshore wind capacity was 35 GW, this contribution demonstrates strong evidence of field validation of these research outcomes, as well as their relative importance and transformative potential to contribute to global decarbonisation.","PeriodicalId":367331,"journal":{"name":"Volume 3: Materials Technology; Pipelines, Risers, and Subsea Systems","volume":"16 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2022-06-05","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"124270727","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Lars Jordal, E. Vermeer, Morten Limi, Kjetil André Karlsen
{"title":"An Alternative Measurement Method to Identify the Minimum Bending Radius of Locked Deformed Bend Restrictor Elements Under Load","authors":"Lars Jordal, E. Vermeer, Morten Limi, Kjetil André Karlsen","doi":"10.1115/omae2022-79709","DOIUrl":"https://doi.org/10.1115/omae2022-79709","url":null,"abstract":"\u0000 Bend restrictors (BR) are used during installation and operation of subsea power cables’ and umbilicals’ to limit the bending radius. This publication presents an alternative measurement method to qualify bend restrictors. One key parameter to qualify bend restrictors is the minimum bending radius (MBR). It is required to measure the MBR of the bend restrictor elements in lock-up position and deformed locked position under load. Existing guidelines, standards and test methods do not describe exactly how and by which means the MBR should be measured. As a result different measurement methods, models and assumptions are used in the industry. To the authors knowledge, existing measurement methods have a variety of limitations, for instance complex time consuming measurement set-up, limited accuracy and sensitive to errors. The alternative measurement method to identify the MBR, described in this publication, is based on a total station measurement technique. The total station consists of an electronic theodolite integrated with an electronic distance measurement unit, which measures the position of specified points in a 3d coordinate system. The alternative measurement method is easy to apply, less time consuming, more robust and can measure the MBR for all positions along the BR elements wirelessly.","PeriodicalId":367331,"journal":{"name":"Volume 3: Materials Technology; Pipelines, Risers, and Subsea Systems","volume":"67 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2022-06-05","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"116782526","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Cost-Effective Optimal Solutions for Steel Catenary Riser Using Artificial Neural Network","authors":"Joshua T. Abam, Y. Pu, Zhiqiang Hu","doi":"10.1115/omae2022-79044","DOIUrl":"https://doi.org/10.1115/omae2022-79044","url":null,"abstract":"\u0000 Over decades, free-hanging steel catenary riser (SCR) has been regarded as a cost-effective and straightforward system for riser solutions in deepwater and ultra-deepwater by National oil companies NOCs, international oil companies IOCs, and independent players. However, the free-hanging SCR comes with its own challenges, which, if not correctly evaluated during design stages, can result in system failures. The two main challenges facing the free-hanging SCR usage are increased self-weight and high fatigue damage, especially at the touchdown and hang-off points. Fatigue damage is the failure resulting from cyclic stress accumulation over a specific duration. The involvement of technologies has improved the design method for these systems over the years. Two of such innovative contributions include the optimisation algorithm and artificial neural network ANN methods. The aim of this research is to develop an effective optimisation algorithm to search for the global optimal weight of the riser configuration while maintaining its structural integrity. The method involves the combined use of ANN and optimisation genetic algorithms (GA) to determine the optimum solution of the SCR. The GA is used because of its capability in handling a variety of complex nonlinear optimisation problems to ascertain the global optimum solution and its capacity to self-moderate the number of iterations. At the same time, the ANN method is deployed for its accurate prediction of non-linear responses. The deployed techniques have shown to be promising due to the time-saving and less computational cost compared to integrating GA and time-domain FE models. This method was illustrated using a prospective 10-inch internal diameter SCR installed in a 2000m deepwater offshore field off the oil-rich Niger Delta region, Nigeria. The obtained results have shown a 19.10 per cent reduction in the riser weight and a time reduction of 90.83 per cent.","PeriodicalId":367331,"journal":{"name":"Volume 3: Materials Technology; Pipelines, Risers, and Subsea Systems","volume":"65 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2022-06-05","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"116981983","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Quantification of Pitting and Stress Concentration Factors on Steel Coupons Exposed to Seawater in the North Sea","authors":"P. Thibaux, Cedric Vanden Haute","doi":"10.1115/omae2022-79458","DOIUrl":"https://doi.org/10.1115/omae2022-79458","url":null,"abstract":"\u0000 Offshore structures are exposed to a harsh environment. Normally they are protected against corrosion by a combination of excess thickness, cathodic protection, paints and / or oxygen depletion. However, the corrosion protection system can also become ineffective leading to a thickness loss and a degradation of the surface, generally by pitting. The present investigation reports the characterization of the surface of corrosion coupons exposed to free corrosion inside monopiles. Three dimensional scans of the surfaces were performed, providing information about roughness data, identification of separate pits and their individual characteristics. The statistical distribution of the pits for a given coupon can then be extrapolated towards a complete structure and linked to an increased probability of failure by computing the stress concentration factor caused by the individual pits.","PeriodicalId":367331,"journal":{"name":"Volume 3: Materials Technology; Pipelines, Risers, and Subsea Systems","volume":"41 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2022-06-05","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"126796006","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Ji Hoon Kim, M. Kim, W. Moon, Jong-Il Lim, Seong-Min Kim, Kwang-hee Yun
{"title":"Low Cycle Fatigue Evaluation for High Strength Welded T-Joint Based on Structural Strain Method","authors":"Ji Hoon Kim, M. Kim, W. Moon, Jong-Il Lim, Seong-Min Kim, Kwang-hee Yun","doi":"10.1115/omae2022-79765","DOIUrl":"https://doi.org/10.1115/omae2022-79765","url":null,"abstract":"\u0000 In design process of welded structures, fatigue failure is one of the main issues to be carefully considered in the assessment of the structural integrity. In general, fatigue failure typically occurs at locations structural discontinuities. In particular, welded structures inevitably contain structural discontinuities during manufacturing process and those locations are vulnerable to fatigue loads. The 2007 ASME Div.2 Code suggests a master S-N curve approach based on structural stress that is insensitive to the size of element with improved accuracy in stress calculation [1]. Structural stress method has been validated based on numerous experimental data and studies in the high-cycle fatigue regime. However, these methods cannot be applied in low-cycle fatigue regime, and validations of the structural stress method in the low-cycle regime are insufficient so far. In this regard, an extension to the master S-N curve, structural strain method was introduced to evaluate the low-cycle fatigue performance by Dong et. al [2].\u0000 The target of this study is to validate the structural strain method in low-cycle fatigue regime of welded joints. For that purpose, low-cycle fatigue test was performed on high strength steel welded T-joints. Pseudo structural stress can be calculated through the derived structural strain, and the equivalent structural stress is expressed in consideration of the shape and thickness effects. Fatigue life evaluation using structural strain method exhibited a good correlation with the master S-N curve not only in the elastic region but also in the low-cycle regime accompanied by plastic deformation. By using structural strain method, it is possible to comprehensively evaluate the fatigue life both in high and low-cycle fatigue regime.","PeriodicalId":367331,"journal":{"name":"Volume 3: Materials Technology; Pipelines, Risers, and Subsea Systems","volume":"72 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2022-06-05","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"125183332","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
K. To̸rnes, R. Nestor, Kristian Thuen, J. Picksley, A. Connaire, Bård Owe Bakken
{"title":"Axial Stiffness and Expansion Behaviour of a Flexible Flowline for Various Extents of Axial Restraint When Subject to Pressure and Thermal Loads","authors":"K. To̸rnes, R. Nestor, Kristian Thuen, J. Picksley, A. Connaire, Bård Owe Bakken","doi":"10.1115/omae2022-79008","DOIUrl":"https://doi.org/10.1115/omae2022-79008","url":null,"abstract":"\u0000 The conditions to which flexible pipes are being exposed are becoming increasingly severe. In particular, flexible flowlines that are fully or partially restrained by back fill or rock cover can become exposed to large axial compression forces under pressure and temperature loading.\u0000 A high True axial compression force may lead to a radial outward displacement of the tensile armour which could eventually exceed the allowable limits of API spec 17J if the axial force exceeds a critical level.\u0000 Furthermore, when the net Effective axial compressive pipe force exceeds a critical level, the pipe may undergo global buckling either upwards (upheaval buckling) or laterally, which needs to be addressed in detail at design stage, typically by using global finite element (FE) simulations in which equivalent mechanical properties are applied to pipe beam elements to capture the overall behaviour of the flexible pipe.\u0000 The overall global mechanical properties of a flexible pipe, such as axial stiffness and thermal and pressure expansion coefficients, which are important parameters in capturing the global buckling behaviour, are dependent on the local behaviour of the various flexible pipe layers.\u0000 In this paper an advanced local FE model developed using the industry standard numerical FE tool, Abaqus, together with the assessment methodology is presented in order to study local layer interactions and their influence on the equivalent axial mechanical properties.","PeriodicalId":367331,"journal":{"name":"Volume 3: Materials Technology; Pipelines, Risers, and Subsea Systems","volume":"94 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2022-06-05","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"131535971","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}