International Journal of Mining and Geo-Engineering最新文献_第10页

A 3D elasto-plastic FEM program developed for reservoir Geomechanics simulations: Introduction and case studies 为油藏地质力学模拟开发的三维弹塑性有限元程序:介绍和案例研究

International Journal of Mining and Geo-Engineering Pub Date : 2013-06-01 DOI: 10.22059/IJMGE.2013.50092

A. Chamani, V. Rasouli

{"title":"A 3D elasto-plastic FEM program developed for reservoir Geomechanics simulations: Introduction and case studies","authors":"A. Chamani, V. Rasouli","doi":"10.22059/IJMGE.2013.50092","DOIUrl":"https://doi.org/10.22059/IJMGE.2013.50092","url":null,"abstract":"The development of yielded or failure zone due to an engineering construction is a subject of study in different disciplines. In Petroleum engineering, depletion from and injection of gas into a porous rock can cause development of a yield zone around the reservoir. Studying this phenomenon requires elasto-plastic analysis of geomaterial, in this case the porous rocks. In this study, which is a continuation of a previous study investigating the elastic behaviour of geomaterial, the elasto-plastic responses of geomaterial were studied. A 3D finite element code (FEM) was developed, which can consider different constitutive models. The code features were explained and some case studies were presented to validate the output results of the code. The numerical model was, then, applied to study the development of the plastic zone around a horizontal porous formation subjected to the injection of gas. The model is described in detail and the results are presented. It was observed that by reducing the cohesion of rocks the extension of the plastic zone increased. Comparing to the elastic model, the ability to estimate the extension of the yield and failure zone is the main advantage of an elasto-plastic model.","PeriodicalId":36564,"journal":{"name":"International Journal of Mining and Geo-Engineering","volume":"56 1","pages":"81-90"},"PeriodicalIF":0.0,"publicationDate":"2013-06-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"84525222","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

引用次数: 0

The Effect of Different Additives and Medium on the Bioleaching of Molybdenite for Cu and Mo Extraction Using Mix Mesophilic Microorganism 不同添加剂和培养基对混合中温微生物浸出钼铜的影响

International Journal of Mining and Geo-Engineering Pub Date : 2013-06-01 DOI: 10.22059/IJMGE.2013.50091

Hadi Abdollahia, Z. Shafaei, M. Noaparast, Z. Manafi, N. Aslan, A. Akcil

{"title":"The Effect of Different Additives and Medium on the Bioleaching of Molybdenite for Cu and Mo Extraction Using Mix Mesophilic Microorganism","authors":"Hadi Abdollahia, Z. Shafaei, M. Noaparast, Z. Manafi, N. Aslan, A. Akcil","doi":"10.22059/IJMGE.2013.50091","DOIUrl":"https://doi.org/10.22059/IJMGE.2013.50091","url":null,"abstract":"Bioleaching processes for extraction of Cu and Mo from molybdenite cons. are more environmentally friendly and consume less energy than conventional technologies, yet less economically efficient. One necessary step towards arriving at a cost-effective bioleaching process is using appropriate methodology to optimize pertinent factors in such processes. To this end, the present study employed Response Surface Methodology to optimize important factors in a molybdenite bioleaching process by mix mesophilic microorganism using shake flasks. The effect of change in the levels of molybdenite concentration, pyrite and silver ion concentration as additives - in the range 3-9%, 1-5%, and 0-1.2gr/l, respectively - on the rate of Cu and Mo bioleaching was studied using a Central Composite Design. The results showed a statistically significant effect of silver ion and molybdenite concentration, and to a lesser pyrite concentration, on the rate of bioleaching of Cu and Mo. Further, different mediums and additives were evaluated for copper and molybdenum extraction from molybdenite concentrate in bioleaching process. Small amounts of silver (100mgr/l AgSO4) dramatically accelerated the copper dissolution process. Addition of FeS2 and sulfur with ferrous sulfate accelerated the acidification and raised the oxidation-reduction potential of solution (medium) with an inoculation of 15% (v/v) of active and adapted indigenous mesophilic bacteria, thus resulting in an overall increase in Mo dissolution efficiency.","PeriodicalId":36564,"journal":{"name":"International Journal of Mining and Geo-Engineering","volume":"70 1","pages":"61-80"},"PeriodicalIF":0.0,"publicationDate":"2013-06-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"79568771","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

引用次数: 3

Assessments of applicability of Q and RMi systems in binary tunnels of Bakhtiari dam_ Iran Q和RMi系统在伊朗巴赫蒂亚里大坝二元隧道中的适用性评价

International Journal of Mining and Geo-Engineering Pub Date : 2013-06-01 DOI: 10.22059/IJMGE.2013.50088

Farshad Nejadshahmohamad, S. Hossaini

{"title":"Assessments of applicability of Q and RMi systems in binary tunnels of Bakhtiari dam_ Iran","authors":"Farshad Nejadshahmohamad, S. Hossaini","doi":"10.22059/IJMGE.2013.50088","DOIUrl":"https://doi.org/10.22059/IJMGE.2013.50088","url":null,"abstract":"The main rock mass classification systems make use of similar rock mass parameters. Due to lack of comprehensive estimation systems, determining the real specifications of jointed rocks faces some difficulties. A vast number of parameters with various degrees of impact are involved in such definitions. Combination impact of all the effective parameters is to be figured out in order to come up with an acceptable value. Different classification systems have some well-known drawbacks and limitations mainly due to their empirical base. However, they are still very useful in practice. Therefore, there is a need to improve their efficiency. Two of these classification systems are the RMi and the Q-system. Bakhtiari dam site is located in the southwest of Iran. The project area consists of the sedimentary bedrocks of Sarvak and Garau formations. The Sarvak Formation is divided into 7 units from Sv1 (oldest) to Sv7 (youngest). Deviation system of Bakhtiari dam includes two tunnels, namely upper and lower tunnels. In this paper, the result of geological scanning of rock masses in seven geological zones hosting binary tunnels of Bakhtiari dam have been utilized. This information along with data produced from many different laboratory tests have been used to estimate the values of Q and RMi for each of the geological zones. The pros and cons of both systems are revealed and relationships are driven between the two systems through statistical analysis. The paper also shows that there are good correlations between the two systems. Finally, the support details suggested by each system are determined.","PeriodicalId":36564,"journal":{"name":"International Journal of Mining and Geo-Engineering","volume":"88 1","pages":"33-40"},"PeriodicalIF":0.0,"publicationDate":"2013-06-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"84194663","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

引用次数: 0

Pillar Design in the Hard Rock Mines of South Africa 南非硬岩矿山矿柱设计

International Journal of Mining and Geo-Engineering Pub Date : 2012-12-01 DOI: 10.22059/IJMGE.2012.51326

D. Malan

{"title":"Pillar Design in the Hard Rock Mines of South Africa","authors":"D. Malan","doi":"10.22059/IJMGE.2012.51326","DOIUrl":"https://doi.org/10.22059/IJMGE.2012.51326","url":null,"abstract":"This paper gives an overview of the difficulties associated with the design of hard rock pillars in South African mines. Recent examples of large scale pillar collapses in South Africa suggest that these were caused by weak partings which traversed the pillars. Currently two different methods are used to determine the strength of pillars, namely, empirical equations derived from back analyses of failed and stable cases and numerical modeling tools using appropriate failure criteria. It is illustrated in the paper that both techniques have their limitations and additional work is required to obtain a better understanding of pillar strength.Empirical methods based on observations of pillar behaviour in a given geotechnical setting are popular and easy to use, but care should be exercised that the results are not inappropriately extrapolated beyond the environment in which they are established. An example is the Hedley and Grant formula (derived for the Canadian uranium mines) that has been used for many years in the South African platinum and chrome mines (albeit with some adaptation of the K-value). Very few collapses have been reported in South Africa for layouts designed using this formula, suggesting that in some cases it might yield estimates of pillar strength that are too conservative.As an alternative, some engineers strongly advocate the use of numerical techniques to determine pillar strength. A close examination unfortunately reveals that these techniques also rely on many assumptions. An area where numerical modeling is invaluable, however, is to determine pillar stresses accurately and to study specific pillar failure mechanisms, such as the influence of weak partings on pillar strength.","PeriodicalId":36564,"journal":{"name":"International Journal of Mining and Geo-Engineering","volume":"14 1","pages":"163-191"},"PeriodicalIF":0.0,"publicationDate":"2012-12-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"90361410","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

引用次数: 3

Hydrogeological Issues Concerning the Thar Lignite Prospect 塔尔褐煤勘探水文地质问题

International Journal of Mining and Geo-Engineering Pub Date : 2012-12-01 DOI: 10.22059/IJMGE.2012.51324

R. Singh, A. Atkins, F. D. Ardejani

引用次数: 8

An Assessment of Factors Affecting Reactive Transport of Biodegradable BTEX in an Unconfined Aquifer System, Tehran Oil Refinery, Iran 影响生物可降解BTEX在无承压含水层系统中反应性输运的因素评估，德黑兰炼油厂，伊朗

International Journal of Mining and Geo-Engineering Pub Date : 2012-12-01 DOI: 10.22059/IJMGE.2012.51327

A. Agah, F. D. Ardejani, H. Ghoreishi

{"title":"An Assessment of Factors Affecting Reactive Transport of Biodegradable BTEX in an Unconfined Aquifer System, Tehran Oil Refinery, Iran","authors":"A. Agah, F. D. Ardejani, H. Ghoreishi","doi":"10.22059/IJMGE.2012.51327","DOIUrl":"https://doi.org/10.22059/IJMGE.2012.51327","url":null,"abstract":"Risk-based assessment methods are commonly used at the contaminated sites by hydrocarbon pollutants. This paper presents the results of a two-dimensional finite volume model of reactive transport of biodegradable BTEX which have been developed for the saturated zone of an unconfined aquifer in the Pump station area of Tehran oil refinery, Iran. The model governing equations were numerically solved by modification of a general commercial software called PHOENICS. To reduce costs in general, many input parameters of a model are often approximated based on the used values in the contaminated sites with same conditions. It was not fully recognised the effect of errors in these inputs on modelling outputs. Thus, a sensitivity analysis was carried out to determine the influence of parameters variability on the results of model. For this analysis, the sensitivity of the model to changes in the dispersivity, distribution coefficient, parameters of Monod, Michaelis-Menten, first- and zero- order kinetics modes on the BTEX contaminant plume were examined by performing several simulations. It was found that the model is sensitive to changes in dispersivity and parameters of Michaelis-Menten, first- and zero- order kinetics model. On the other hand, the predictions for plumes assuming Monod kinetics are similar, even if different values for parameterization are chosen. The reason for this insensibility is that degradation is not limited by microbial kinetics in the simulation, but by dispersive mixing. Quantifying the effect of changes in model input parameters on the modelling results is essential when it is desired to recognise which model parameters are more vital on the fate and transport of reactive pollutants. Furthermore, this process can provide an insight into understanding pollutant transportation mechanisms.","PeriodicalId":36564,"journal":{"name":"International Journal of Mining and Geo-Engineering","volume":"134 1","pages":"193-208"},"PeriodicalIF":0.0,"publicationDate":"2012-12-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"79418175","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

引用次数: 1

Coupling Geomechanics and Transport in Naturally Fractured Reservoirs 天然裂缝性储层地质力学与输运耦合研究

International Journal of Mining and Geo-Engineering Pub Date : 2012-12-01 DOI: 10.22059/IJMGE.2012.51322

M. Jalali, M. Dusseault

{"title":"Coupling Geomechanics and Transport in Naturally Fractured Reservoirs","authors":"M. Jalali, M. Dusseault","doi":"10.22059/IJMGE.2012.51322","DOIUrl":"https://doi.org/10.22059/IJMGE.2012.51322","url":null,"abstract":"Large amounts of hydrocarbon reserves are trapped in naturally fractured reservoirs which arechallenging in terms of accurate recovery prediction because of their joint fabric complexity andlithological heterogeneity. Canada, for example, has over 400 billion barrels of crude oil in fracturedcarbonates in Alberta, most of this being bitumen of viscosity greater than 106 cP in the GrosmontFormation, which has an average porosity of about 13-15%. Thermal methods are the most commonexploitation approaches in such viscous oil reservoirs which, in the case of steam injection, are associatedwith up to 275-300°C temperature changes, leading to considerable thermoelastic expansion. Thistemperature change, combined with pore pressure changes from injection and production processes, leadsto massive effective stress variations in the reservoir and surrounding rocks. The thermally-induced(thermoelastic) stress changes can easily be an order of magnitude greater than the pore pressure effectsbecause of the high intrinsic stiffness of the low porosity limestone and bounding strata. Study of thesestress-pressure-temperature effects requires a thermo-hydro-mechanical (THM) coupling approach whichconsiders the simultaneous variation of effective stress, pore pressure, and temperature and theirinteractions. For example, thermal expansion can lead to significant joint dilation, increasing themacroscopic, joint-dominated transmissivity by an order of magnitude in front of and normal to thethermal front, while reducing it in the direction tangential to the heating front. This leads to stronginduced anisotropy of transport processes, which in turn affects the spatial distribution of the heatingarising from advective heat transfer.","PeriodicalId":36564,"journal":{"name":"International Journal of Mining and Geo-Engineering","volume":"63 1","pages":"105-131"},"PeriodicalIF":0.0,"publicationDate":"2012-12-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"84404170","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

引用次数: 7

Using Bacillus Cereus as a Geo-Biological Marker For Gold Prospecting in Iran 蜡样芽孢杆菌在伊朗找金中的地质生物学标记作用

International Journal of Mining and Geo-Engineering Pub Date : 2012-12-01 DOI: 10.22059/IJMGE.2012.51328

B. Tokhmechi, M. Mamarabadi

{"title":"Using Bacillus Cereus as a Geo-Biological Marker For Gold Prospecting in Iran","authors":"B. Tokhmechi, M. Mamarabadi","doi":"10.22059/IJMGE.2012.51328","DOIUrl":"https://doi.org/10.22059/IJMGE.2012.51328","url":null,"abstract":"Several methods have been developed for gold exploration in the past, among which biological base method is known to be the most efficient with least expenses. This method can also be used for latent gold prospects exploration. In the present study, the possibility of applying Bacillus cereus frequency in soil as a biological marker was investigated for the exploration of latent gold prospecting in Iran. The study was performed on three gold sources in Iran known as Moteh, Zarmehr and Mahallat, however, the major focus was on Mahallat gold reserve. The results of bacterial cultivation showed that no bacteria have been isolated in samples taken from Moteh soil. On the other hand, the presence of bacteria was observed in cultural media which were prepared from the collected samples from Zarmehr and Mahallat.In Mahallat gold reserve the frequency of bacteria was noticeable, particularly in the soils with in-situ fine-grained. In addition, it was seen that when the gold grad increases the bacterial frequency of Bacillus cereus will also increase. Finally, a linear correlation was developed between bacterial frequency and the gold semi-quantified grad. Using this correlation the monitoring of semi-quantified gold grad can be undertaken.","PeriodicalId":36564,"journal":{"name":"International Journal of Mining and Geo-Engineering","volume":"10 2","pages":"209-221"},"PeriodicalIF":0.0,"publicationDate":"2012-12-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"72604412","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

引用次数: 1

Cut-off Grade Optimization for Maximizing the Output Rate 产量最大化的截止品位优化

International Journal of Mining and Geo-Engineering Pub Date : 2012-12-01 DOI: 10.22059/IJMGE.2012.51325

A. Khodayari, A. Jafarnejad

{"title":"Cut-off Grade Optimization for Maximizing the Output Rate","authors":"A. Khodayari, A. Jafarnejad","doi":"10.22059/IJMGE.2012.51325","DOIUrl":"https://doi.org/10.22059/IJMGE.2012.51325","url":null,"abstract":"In the open-pit mining, one of the first decisions that must be made in production planning stage, after completing the design of final pit limits, is determining of the processing plant cut-off grade. Since this grade has an essential effect on operations, choosing the optimum cut-off grade is of considerable importance. Different goals may be used for determining optimum cut-off grade. One of these goals may be maximizing the output rate (amount of product per year), which is very important, especially from marketing and market share points of view. Objective of this research is determining the optimum cut-off grade of processing plant in order to maximize output rate. For performing this optimization, an Operations Research (OR) model has been developed. The object function of this model is output rate that must be maximized. This model has two operational constraints namely mining and processing restrictions. For solving the model a heuristic method has been developed. Results of research show that the optimum cut-off grade for satisfying pre-stated goal is the balancing grade of mining and processing operations, and maximum production rate is a function of the maximum capacity of processing plant and average grade of ore that according to the above optimum cut-off grade must be sent to the plant.","PeriodicalId":36564,"journal":{"name":"International Journal of Mining and Geo-Engineering","volume":"14 1","pages":"157-162"},"PeriodicalIF":0.0,"publicationDate":"2012-12-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"90322345","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

引用次数: 12

A Methodology to Estimate Ores Work Index Values, Using Miduk Copper Mine Sample 一种估算矿石工作指标值的方法——以米度铜矿为例

International Journal of Mining and Geo-Engineering Pub Date : 2012-12-01 DOI: 10.22059/IJMGE.2012.51323

M. Noaparast, S. Rahmati, Golnaz Jozanikohan, S. Aslani, A. Ghorbani

{"title":"A Methodology to Estimate Ores Work Index Values, Using Miduk Copper Mine Sample","authors":"M. Noaparast, S. Rahmati, Golnaz Jozanikohan, S. Aslani, A. Ghorbani","doi":"10.22059/IJMGE.2012.51323","DOIUrl":"https://doi.org/10.22059/IJMGE.2012.51323","url":null,"abstract":"It is always attempted to reduce the costs of comminution in mineral processing plants. One of thedifficulties in size reduction section is not to be designed properly. The key factor to design size reductionunits such as crushers and grinding mills, is ore’s work index. The work index, wi, presents the oregrindability, and is used in Bond formula to calculate the required energy. Bond has defined a specificrelationship between some parameters which is applied to calculate wi, which are control screen, fineparticles produced, feed and product d80.In this research work, a high grade copper sample from Miduk copper concentrator was prepared, and itswork index values were experimentally estimated, using different control screens, 600, 425, 212, 150, 106and 75 microns. The obtained results from the tests showed two different behaviors in fine production.According to these two trends the required models were then defined to present the fine mass calculationusing control screen. In next step, an equation was presented in order to calculate Miduk copper ore workindex for any size. In addition to verify the model creditability, a test using 300 microns control screenwas performed and its result was compared with calculated ones using defined model, which showed agood fit. Finally the experimental and calculated values were compared and their relative error was equalto 4.11% which is an indication of good fit for the results.","PeriodicalId":36564,"journal":{"name":"International Journal of Mining and Geo-Engineering","volume":"75 1","pages":"133-140"},"PeriodicalIF":0.0,"publicationDate":"2012-12-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"83370682","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

引用次数: 1