2014 15th International Conference on Electronic Packaging Technology最新文献

筛选
英文 中文
Development and characterization of graphene-enhanced thermal conductive adhesives 石墨烯增强导热胶粘剂的研制与表征
2014 15th International Conference on Electronic Packaging Technology Pub Date : 2016-09-01 DOI: 10.1109/ESTC.2016.7764682
M. Casa, Nan Wang, Shirong Huang, L. Ye, P. Ciambelli, Johan Liu
{"title":"Development and characterization of graphene-enhanced thermal conductive adhesives","authors":"M. Casa, Nan Wang, Shirong Huang, L. Ye, P. Ciambelli, Johan Liu","doi":"10.1109/ESTC.2016.7764682","DOIUrl":"https://doi.org/10.1109/ESTC.2016.7764682","url":null,"abstract":"According to Moore's Laws, complexity and power densities of electronic devices are increased during the last decades, moreover their dimensions are shrinking to nanometers causing hot-spot temperature escalation. Thermal management, therefore, becomes a critical issue for next generation of electronics. This scenario motivates development of novel thermal conductive adhesive (TCA) with enhanced thermal conductivity. Conventional TCAs use polymers as the matrix (base material) and utilize large loading weight fraction of the filler, usually silver particles, to achieve the thermal conductivity of 1-4 W/ m K at room temperature [1]. Lately it was discovered that graphene exhibit superior thermal conductivity [2] even when they are incorporated with matrix materials [3], which offers a potential to develop high thermal conductive graphene-filled compound. In this paper, a new functionalized graphene and its filled TCA have been developed and characterized. Starting from pristine graphite flakes, graphene was prepared through chemical exfoliation and functionalized with a nano silver layer to form a special metal/graphene hybrid material. Moreover, an efficient method to uniformly disperse the nano-scaled graphene hybrid material in silver-epoxy matrix was developed. Cross-section view of SEM has shown a homogeneous component structure, and TGA analysis of hybrid material is given. The developed compound is based on a commercial TCA which is composed with epoxy matrix and micro-sized Ag flakes. Thermal characterization through Laser-flash equipment has indicated that a significant thermal conductivity improvement was achieved through adding functionalized graphene into the material. Different TCA samples with different weight percentages of functionalized graphene ranging from 0 % (reference) to 11.5 % were prepared and tested to study thermal conductivity change. Data show that a thermal conductivity value of 7.6 W/ m K is reached when the graphene/silver percentage is 11.5 % that is almost 4 times higher than our reference.","PeriodicalId":335068,"journal":{"name":"2014 15th International Conference on Electronic Packaging Technology","volume":"33 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2016-09-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"122624413","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 4
Rapid formation of Cu-Sn intermetallic compounds by strong electric current 强电流快速形成Cu-Sn金属间化合物
2014 15th International Conference on Electronic Packaging Technology Pub Date : 2014-10-16 DOI: 10.1109/ICEPT.2014.6922702
Baolei Liu, Yanhong Tian, Shang Wang, Rui Zhang, Xin Zhao, C. Dong, Chunqing Wang
{"title":"Rapid formation of Cu-Sn intermetallic compounds by strong electric current","authors":"Baolei Liu, Yanhong Tian, Shang Wang, Rui Zhang, Xin Zhao, C. Dong, Chunqing Wang","doi":"10.1109/ICEPT.2014.6922702","DOIUrl":"https://doi.org/10.1109/ICEPT.2014.6922702","url":null,"abstract":"A new approach of rapid fabrication of intermetallic compounds (IMCs) solder joints at ambient temperature was investigated in this work. The high share strength Cu/Sn/Cu solder joints were obtained by using different strong electric currents 0.8KA, 0.9KA, 1.0KA, and 1.2KA for only about 0.2s. The Sn foils with the thickness of 10μm were used as solders. The results showed that with the current intensities increasing from 0.8KA to 1.2KA, the thickness of IMCs, Cu6Sn5, increased from less than 1μm to 4.2μm for 0.2s, which was induced by thermoelectric coupling interfacial interaction at the liquid solder/solid metallization interface. In addition, amount of dendritic Cu6Sn5 distributed in the Sn matrix at the bottom right corner of solder joint under the current intensity of 1.2KA, which was caused by the current crowding effects. Lastly, the share strengths of Cu/Sn/Cu solder joints under the rapid bonding process were improved with the bonding current increasing. The share strength was up to 51.9MPa at 1.2KA.","PeriodicalId":335068,"journal":{"name":"2014 15th International Conference on Electronic Packaging Technology","volume":"40 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2014-10-16","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"116643908","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 0
Molecular modeling of the conductivity of carbon nanotubes under different temperature and humidity 不同温度和湿度下碳纳米管电导率的分子模拟
2014 15th International Conference on Electronic Packaging Technology Pub Date : 2014-10-16 DOI: 10.1109/ICEPT.2014.6922847
N. Yang, Xianping Chen, M. Cai, Daoguo Yang, Guoqi Zhang
{"title":"Molecular modeling of the conductivity of carbon nanotubes under different temperature and humidity","authors":"N. Yang, Xianping Chen, M. Cai, Daoguo Yang, Guoqi Zhang","doi":"10.1109/ICEPT.2014.6922847","DOIUrl":"https://doi.org/10.1109/ICEPT.2014.6922847","url":null,"abstract":"At present, the sensor is widely used and its types are varied, such as biological sensor, gas sensor, humidity sensor, optical sensor, pressure sensor, etc. However, the performance of many sensors remains to be optimized. For instance, the problems of activity of the biofilm, detection range and sensitivity life in biosensor have limited the development of its own. On the other hand, in gas sensor, the detection of hysteresis, degradation of serious phenomenon is widespread. And in the humidity sensor, humidity is the parameter which is hard to detect accurately, for serious impact of atmospheric pressure and temperature. However, with the emergence of CNTs based sensors, the above problems are hopefully solved. Owing to the excellent properties with CNTs, such as promoting electron transfer, large edge plane/basal plane ratio, high electrical conductivity, etc, CNTs based sensors have a higher sensitivity, lower detection limit and faster electron transfer kinetics than traditional ones. In addition, CNTs film has a very large specific surface area, and a strong interaction between the surrounding medium, therefore, CNTs film is seriously sensitive to the humidity of external environment, which has obvious humidity sensitive features. Due to the different using environment of CNTs sensors, the research of conductibility of CNTs under the different temperature has a great significance. Therefore, molecular modeling approach was adopted to analyze the conductivity of different type of CNTs like (9, 9) and (9, 0) CNTs within the scope of sensor operating temperature (-20°C-100°C) and different humidity conditions. It was found that the forbidden gap of (9, 9) and (9, 0) CNTs are basically decreased with the increase of temperature. Meanwhile the conductivity of CNTs under different moisture circumstances was also analyzed. The forbidden gap of CNTs has changed little after filled with pure water molecules This study provides a rational way using molecular modeling to evaluate and design CNTs for various applications such as biosensors and chemical sensors.","PeriodicalId":335068,"journal":{"name":"2014 15th International Conference on Electronic Packaging Technology","volume":"4 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2014-10-16","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"126863305","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 0
Preparation of MnO2/graphene nanocomposite for the application of supercapacitor 用于超级电容器的二氧化锰/石墨烯纳米复合材料的制备
2014 15th International Conference on Electronic Packaging Technology Pub Date : 2014-10-16 DOI: 10.1109/ICEPT.2014.6922631
Chunliang Liu, Dayong Gui, Jianhong Liu
{"title":"Preparation of MnO2/graphene nanocomposite for the application of supercapacitor","authors":"Chunliang Liu, Dayong Gui, Jianhong Liu","doi":"10.1109/ICEPT.2014.6922631","DOIUrl":"https://doi.org/10.1109/ICEPT.2014.6922631","url":null,"abstract":"Graphene oxide was synthesized by an improved method, and then MnO2/graphene oxide composite was obtained using chemical precipitation. The MnO2/graphene nanocomposite was obtained via hydrazine reduction of the MnO2/graphene oxide composite. The morphology and surface chemical composition of the composites have been investigated by scanning electron microscope (SEM), Fourier transform infrared spectrum (FT-IR) and X-ray diffraction (XRD), respectively. The capacitive properties of the MnO2/graphene nanocomposite were measured using cyclic voltammetry and galvanostatic charge/discharge tests and electrochemical impedance spectroscopy in a double-electrode experimental setup using a 1 mol/L Na2SO4 aqueous solution as the electrolyte. The results of galvanostatic charge/discharge show that the composite has good electrochemical performance and the average capacitance is as high as 188.69 F/g at 1 A/g in the 1 mol/L Na2SO4 solution aqueous electrolyte.","PeriodicalId":335068,"journal":{"name":"2014 15th International Conference on Electronic Packaging Technology","volume":"392 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2014-10-16","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"114909971","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 1
Whisker growth in the crack region of the cathode interface during current stressing process in lead-free solder joints 无铅焊点电流应力过程中阴极界面裂纹区晶须生长
2014 15th International Conference on Electronic Packaging Technology Pub Date : 2014-10-16 DOI: 10.1109/ICEPT.2014.6922936
Hongwen He, Liqiang Cao, H. Hao, Limin Ma, F. Guo
{"title":"Whisker growth in the crack region of the cathode interface during current stressing process in lead-free solder joints","authors":"Hongwen He, Liqiang Cao, H. Hao, Limin Ma, F. Guo","doi":"10.1109/ICEPT.2014.6922936","DOIUrl":"https://doi.org/10.1109/ICEPT.2014.6922936","url":null,"abstract":"Whisker formation mechanism has been widely investigated for recent decades since its great influence on degrading the reliability of the electronic devices. In our work, effect of current stressing on whisker growth in Cu/Sn3.8Ag0.7Cu/Cu and Cu/Sn58Bi/Cu solder joints was investigated. Results show that after current stressing for a long time, many whiskers are observed in some local regions at the cathode interface. What is most important thing is that the whisker growth occurred at the cathode interface in the crack region. These whiskers are all with filament-type morphology, and no column-type is formed. In general, they can reach beyond 10μm in length. EDX reveals that these whiskers are mixtures of Sn and Bi for Sn58Bi solder and single Sn crystal for Sn3.8Ag0.7Cu solder. However, as the stressing time increases, the whiskers seem to stop growing any more. In conclusion, this filament-type whisker growth at the cathode interface may be responsible for the current density accumulation at the crack region, leading to much Joule heat aggregation that triggers the whisker formation.","PeriodicalId":335068,"journal":{"name":"2014 15th International Conference on Electronic Packaging Technology","volume":"36 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2014-10-16","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"115099652","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 1
Effect of N-well for single event upset in 65 nm CMOS triple-well technology in 6T SRAM CELLS 6T SRAM CELLS中65nm CMOS三阱技术中n阱对单事件扰动的影响
2014 15th International Conference on Electronic Packaging Technology Pub Date : 2014-10-16 DOI: 10.1109/ICEPT.2014.6922840
Jian Wang, Lei Li
{"title":"Effect of N-well for single event upset in 65 nm CMOS triple-well technology in 6T SRAM CELLS","authors":"Jian Wang, Lei Li","doi":"10.1109/ICEPT.2014.6922840","DOIUrl":"https://doi.org/10.1109/ICEPT.2014.6922840","url":null,"abstract":"In this paper, the effect of N-well for single event upset in 65nm CMOS triple well technology SRAM CELLS is studied. The study shows that charge sharing collection increases because of the existing of N-well in triple-well technology. While it restrains the single event upset and reduces the soft error rate (SER) compared with the SRAM whose NMOS are dual-well technology devices. The result of this work can provide a way to protect integration circuits from single event effect (SEE) and soft errors.","PeriodicalId":335068,"journal":{"name":"2014 15th International Conference on Electronic Packaging Technology","volume":"8 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2014-10-16","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"131382259","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 0
Increasing bonding strength of chips and substrates assembly by argon plasma 用氩等离子体提高芯片和衬底组装的结合强度
2014 15th International Conference on Electronic Packaging Technology Pub Date : 2014-10-16 DOI: 10.1109/ICEPT.2014.6922624
C. Chuang, J. Aoh, Bo-Zhi Yang
{"title":"Increasing bonding strength of chips and substrates assembly by argon plasma","authors":"C. Chuang, J. Aoh, Bo-Zhi Yang","doi":"10.1109/ICEPT.2014.6922624","DOIUrl":"https://doi.org/10.1109/ICEPT.2014.6922624","url":null,"abstract":"The plasma surface activation was applied to the thermal-compression bonding of chips and substrates. An Ar gas was selected to perform the physical plasma treatment on the bonding surface of Au bumps and Cu electrodes. This plasma-activated technology was expected to remove the surface contaminants, and then to reduce the bonding barrier for chips and substrates assembly. The experimental results presented an effective improvement in the die-shear force performance of chips and substrates assembly using the Ar plasma activation. Increasing the die-shear force was attributed to remove the contaminants on the surface of Cu electrodes and Au bumps by the Ar plasma activation. After Au bumps and Cu electrodes were activated by Ar plasma, neither delamination nor crack is found at bonding interface between Au bumps and Cu electrodes for chips and substrates assembly. The die-shear forces were higher than the minimum required value stated in the JEDEC specifications for Cu electrodes and Au bumps with Ar plasma activated. As Cu electrodes with Ar plasma treating under various activated durations, the fracture mode of Au bumps separating from the surface of Cu electrodes transforms to that of Au bumps separating from the bond pads, indicating the bonding strength of Au bumps and Cu electrodes is higher than that of Au bumps and bond pads. A low contact angle was also determined on the surface of Cu electrodes after the Ar plasma activated, indicating a clean bonding surface was achieved. A clear atomic interdiffusion between Au bumps and Cu electrodes was observed for Au bumps and Cu electrodes with Ar plasma activated. The Ar plasma activation was an effective scheme to improve the bonding strength of chips and substrates assembly. Thus, the Ar plasma activation has great potential to be applied to chips and substrates assembly.","PeriodicalId":335068,"journal":{"name":"2014 15th International Conference on Electronic Packaging Technology","volume":"70 ","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2014-10-16","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"134093837","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 3
Stress control of plasma enhanced chemical vapor deposited SiO2 film in through silicon via process 等离子体增强化学气相沉积SiO2薄膜在硅通孔工艺中的应力控制
2014 15th International Conference on Electronic Packaging Technology Pub Date : 2014-10-16 DOI: 10.1109/ICEPT.2014.6922662
Wenguo Ning, Qiang Zhao, K. Zheng, Dong Chen, Hongyan Guo, Li Zhang, Zhengxun Hu, K. Tan, C. Lai
{"title":"Stress control of plasma enhanced chemical vapor deposited SiO2 film in through silicon via process","authors":"Wenguo Ning, Qiang Zhao, K. Zheng, Dong Chen, Hongyan Guo, Li Zhang, Zhengxun Hu, K. Tan, C. Lai","doi":"10.1109/ICEPT.2014.6922662","DOIUrl":"https://doi.org/10.1109/ICEPT.2014.6922662","url":null,"abstract":"Through silicon via is an essential element for three dimension integration. Excessive stress have potential effects on the reliability of the structure. One concern is the peeling problem of SiO2 layer. It was found that it is caused by the electroplated copper during later solder reflow process. We also found that it is possible to ameliorate the peeling problem by increasing the compressive stress in the SiO2. We found that the peeling problem is solved when SiO2 was deposited with higher compressive stress. Compared to 90% peeling off for compressive stress -20 MPa in the SiO2, Only 20% peeling off for compressive stress -40 MPa in the SiO2 and no peeling off for compressive stress -110 MPa and -150 MPa in the SiO2.","PeriodicalId":335068,"journal":{"name":"2014 15th International Conference on Electronic Packaging Technology","volume":"59 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2014-10-16","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"131121793","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 0
Study of gold wire bonding on 0.1 μm soft gold film substrate 0.1 μm软金膜衬底上金丝键合的研究
2014 15th International Conference on Electronic Packaging Technology Pub Date : 2014-10-16 DOI: 10.1109/ICEPT.2014.6922635
Ruonan Zhang, Rui Guo, Ming Li, Kaiyou Qian, Hope Chiu
{"title":"Study of gold wire bonding on 0.1 μm soft gold film substrate","authors":"Ruonan Zhang, Rui Guo, Ming Li, Kaiyou Qian, Hope Chiu","doi":"10.1109/ICEPT.2014.6922635","DOIUrl":"https://doi.org/10.1109/ICEPT.2014.6922635","url":null,"abstract":"0.1 μm soft gold film substrate was ultrasonic bonded with 0.6 mil gold wire, which effectively reduced gold assumption comparing to the traditional 0.3~0.5 μm soft gold film substrate. The substrate showed good bondability by wire pull test (WPT) and perfect reliability by high temperature storage test (HTST). The bonding structure in failure mode of wire pull test was studied by focused ion beam (FIB) and scanning electron microscope (SEM) observation. A design of experiments (DOE) was set up to figure out the optimistic process window for gold wire bonding on Ni-Pd-Au substrate.","PeriodicalId":335068,"journal":{"name":"2014 15th International Conference on Electronic Packaging Technology","volume":"51 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2014-10-16","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"133515007","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 1
A LTE Doherty power amplifier using Envelope tracking technique 一种采用包络跟踪技术的LTE多尔蒂功率放大器
2014 15th International Conference on Electronic Packaging Technology Pub Date : 2014-10-16 DOI: 10.1109/ICEPT.2014.6922893
Zihao Zhang, Zhenyu Xin
{"title":"A LTE Doherty power amplifier using Envelope tracking technique","authors":"Zihao Zhang, Zhenyu Xin","doi":"10.1109/ICEPT.2014.6922893","DOIUrl":"https://doi.org/10.1109/ICEPT.2014.6922893","url":null,"abstract":"Along with the development of Long term evolution (LTE) communication system, higher linearity and efficiency of base station power amplifier required. Although, Conventional Doherty amplifier base station can't meet this requirement. For the first time, This is the first use of Envelope tracking (ET) technology is used to dynamically control the gate voltage of Doherty power amplifier peak amplifier: at low power input, low voltage is supplied to the peaking amplifier, aiming to improve efficiency: on the other hand, at high power input, high voltage is supplied to the peaking amplifier to obtain high efficiency. Compared with the traditional power amplifier, the new design could improve the linearity without decreasing efficiency. In this paper, the design and simulation is conducted by Rogers 4350, and the third-order inter-modulation distortion (IMD3) is improved by 5-dBc with remaining the high efficiency. Physical test and simulation results are in good agreement with this article's index.","PeriodicalId":335068,"journal":{"name":"2014 15th International Conference on Electronic Packaging Technology","volume":"333 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2014-10-16","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"133694963","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 5
0
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
确定
请完成安全验证×
相关产品
×
本文献相关产品
联系我们:info@booksci.cn Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。 Copyright © 2023 布克学术 All rights reserved.
京ICP备2023020795号-1
ghs 京公网安备 11010802042870号
Book学术文献互助
Book学术文献互助群
群 号:604180095
Book学术官方微信
小红书