M.V.C. Morais, R. Reidel, P. Weiss, Sascha Baumann, C. Hübner, F. Henning
{"title":"Integration of electronic components in the thermoplastic processing chain: possibilities through additive manufacturing using conductive materials","authors":"M.V.C. Morais, R. Reidel, P. Weiss, Sascha Baumann, C. Hübner, F. Henning","doi":"10.1109/ICMID.2018.8527054","DOIUrl":"https://doi.org/10.1109/ICMID.2018.8527054","url":null,"abstract":"An alternative approach for the production of Molded Interconnect Devices (MID), using additive manufacturing of thermoplastics, is presented. Two-component 3D printing enables the processing of a pristine polymer together with a second phase composed out of conductive nanocomposite. For the validation of this concept, two different demonstrators were developed and produced using anArburg Freeformer printer: a USB insert with an integrated LED (“Lightstick”) and a capacitive touch sensor system. The conductive paths were printed in PC/ABS made conductive with carbon nanotubes (CNTs). Measured resistivity of each conductive layer, of 200$mu$m thickness, was of 1 $Omega$textbf{{cm. The whole circuit resistance together with the contacts has proved to be low enough to successfully light up the LEDs. Furthermore, printed capacitive electrodes demonstrated that the functions of touch pad, proximity sensor and slider can be integrated in a thermoplastic without additional metallic components. This technique presents promising results for the integration of electrical functionality into thermoplastic parts and their processing chain.","PeriodicalId":333602,"journal":{"name":"2018 13th International Congress Molded Interconnect Devices (MID)","volume":"1 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2018-09-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"126428350","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Functionalization of additive manufactures components with laser direct structurable lacquer","authors":"T. Mager, C. Jürgenhake, R. Dumitrescu","doi":"10.1109/ICMID.2018.8527014","DOIUrl":"https://doi.org/10.1109/ICMID.2018.8527014","url":null,"abstract":"MID technology offers high potential for the development of innovative products. The integration of electronic and mechanical functions on spatial circuit boards allows the realization of modules with high functional density, freedom of design and a significant degree of miniaturization. However, due to the interdisciplinary nature of the technology the product development is faced with barriers. These include mechanical, thermal and electrical interactions as well as restrictions between the product design and the production process. The cost-intensive injection moulding for the manufacture of the base part of functional products also hinders extensive market penetration. On the other hand, additive manufacturing technologies offer the potential to effectively meet the before mentioned challenges of fast reaction times and high flexibility in small quantities and thus profoundlychange industrial production. In combination with MID-technology, individually manufactured components can be directly equipped with electronic components for the first time and thus be electrically functionalized.With this fusion, the functional range of a component can be extended significantly, the integration density increases and the reliability is improved by saving additional assembly steps. With regard to small batch sizes, the combination of an additive production of a base body and subsequent coating with laser-directly structured lacquer (LDS lacquer) eliminates the cost-intensive injection molding. This process has been developed for rapid prototyping initially; reliability and longterm stability were of secondary importance. In this paper we present an approach to improve the properties of lacquerbased additively produced MIDs.","PeriodicalId":333602,"journal":{"name":"2018 13th International Congress Molded Interconnect Devices (MID)","volume":"7 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2018-09-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"117073361","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Nils Ischdonat, C. Dreyer, D. Gräf, J. Franke, J. Hörber, M. Hedges
{"title":"Influences of Manufacturing Sequences for the Application of Printed Electronics on Aircraft Interior Components","authors":"Nils Ischdonat, C. Dreyer, D. Gräf, J. Franke, J. Hörber, M. Hedges","doi":"10.1109/ICMID.2018.8526932","DOIUrl":"https://doi.org/10.1109/ICMID.2018.8526932","url":null,"abstract":"The current single-aisle production requires a higher efficiency and smarter processes within the context of industry 4.0. Both digitalization and robotics in the Final Assembly Line (FAL) are just two of many objectives that are of great importance. Within the field of cabin interiors, the design of cabin lining components also has to meet the requirements of these primary objectives. In concrete terms, this means further weight reduction, optimizing the installation process and particularly the integration of additional functionalities by printed electronics. The use of different printing technologies for instance Aerosol-Jet and Piezo-Jet in combination with a broad spectrum of functional inks enable printed circuits, antennas and sensors directly onto cabin lining components within the near future. Thereby, smarter cabin interior components can be realized which could lead to more functionalities and a further reduction of manufacturing time.","PeriodicalId":333602,"journal":{"name":"2018 13th International Congress Molded Interconnect Devices (MID)","volume":"135 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2018-09-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"123734948","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
D. Gräf, S. Neermann, Lisa Stuber, M. Scheetz, J. Franke
{"title":"Pushing the Boundaries of 3D-MID: Pulse-Width Modulated Light Technology for Enhancing Surface Properties and Enabling Printed Electronics on FFF-Printed Structures","authors":"D. Gräf, S. Neermann, Lisa Stuber, M. Scheetz, J. Franke","doi":"10.1109/ICMID.2018.8526995","DOIUrl":"https://doi.org/10.1109/ICMID.2018.8526995","url":null,"abstract":"In this paper, the feasibility and the opportunities of combining both structural and functional printing technologies are shown. As printing technologies, Fused Filament Fabrication (FFF) for generating the structure and the Aerosol-Jet Printing (AJP) system for functionalization was used. The combined application is enabled by using a pulse-width modulated light technology which carries out two tasks. Firstly, the surface of printed structures can be improved by light exposure up to 94% in regard to the surface roughness. Secondly, the technology is used for light sintering realizing conductive tracks on heat sensitive materials such as polylactic acid (PLA).","PeriodicalId":333602,"journal":{"name":"2018 13th International Congress Molded Interconnect Devices (MID)","volume":"87 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2018-09-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"134401765","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Julian Schirmer, Kilian Eisen, M. Reichenberger, Jewgeni Roudenko, S. Neermann, J. Franke
{"title":"Long-Term Behavior of SMT Components Mounted on Printed Polymer Thick Film Pastes","authors":"Julian Schirmer, Kilian Eisen, M. Reichenberger, Jewgeni Roudenko, S. Neermann, J. Franke","doi":"10.1109/ICMID.2018.8526939","DOIUrl":"https://doi.org/10.1109/ICMID.2018.8526939","url":null,"abstract":"In this work the reliability of soldered (SnBiAg) and isotropically conductive interconnections on screenprinted PTF pastes is investigated. The combination of printed circuitry and standard electronic components (HPE) might be a practical solution for high quality and industrial scale production while also saving cost, raw material and reducing process complexity. A commercially available, novel solderable PTF paste was used to mount CR0805-sized SMT components on low-cost PET substrates. By utilizing different accelerated aging tests (high temperature, damp heat and temperature cycling) the influence on electrical and mechanical characteristics is evaluated and compared to freshly produced specimen. Additionally, optical inspection of microsections and the fracture occurrence was investigated. The results for both interconnection materials are very promising. Soldering on the PTF paste resulted in good wettability and solderability. Aditionally, for soldered joints neither electric nor mechanical failures occurred during the test duration of 500 h (250 cycles). For conductively bonded components also no significant decrease in electrical resistance was observed. Both combinations have a contact resistance within $50 mathrm{m}Omega$ to $150 mathrm{m}Omega$. Shear force values increased for HT and TH storage, which might be explained by post-curing of the epoxy resin. For TC storage however, a significant drop $(lt/pgtgt30$% in relation to the initial value) was observed. Further experiments show that the decrease occurs between 100 and 250 cycles. The change in shear force goes along with a change in fracture appearance, which was evaluated in this work. Overall, this study provides significant results which might enable the production of more reliable and high quality MID or HPE products.","PeriodicalId":333602,"journal":{"name":"2018 13th International Congress Molded Interconnect Devices (MID)","volume":"37 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2018-09-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"114714437","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Kamotesov Sergkei, P. Lombard, V. Semet, B. Allard, M. Moguedet, Michel Cabrera
{"title":"The Potential of 3D-MID Technology for Omnidirectional Inductive Wireless Power Transfer","authors":"Kamotesov Sergkei, P. Lombard, V. Semet, B. Allard, M. Moguedet, Michel Cabrera","doi":"10.1109/ICMID.2018.8526962","DOIUrl":"https://doi.org/10.1109/ICMID.2018.8526962","url":null,"abstract":"Omnidirectional inductive wireless charging system of a mobile is studied. Instead of using conventional planar coils printed on circuit boards, 3D Molded Interconnect Device (3D-MID) coils are used. The receiver is a single piece that has 3 elliptic inductors pointing in 3 different directions of the space. A half meter cubic box with 4 planar emitting inductors on 4 sides is used to transmit power to the receiver inside the cube, regardless to the position and orientation of the receiver. Measurement results show that the 3D-MD receiver can get a power of 1.4 W at 7.9% efficiency on most of the positions inside the box. When the receiver is at the central position and also in the corners of the box, there is little variation of the transferred power when the receiver turns 360°, which means that it is almost insensitive to angular misalignment. However, when the receiver moves from the center towards the corners, there is a drop or an increase of power, which means that there is a lack of uniformity of the power which transferred near the corners. Ways to improve this point are discussed. However, our conclusion is that 3D-MID technology is an interesting technology for replacing the planar coils used in conventional WPT receivers.","PeriodicalId":333602,"journal":{"name":"2018 13th International Congress Molded Interconnect Devices (MID)","volume":"6 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2018-09-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"124345422","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
M. Wolf, Florian Janek, T. Meissner, B. Wigger, M. Barth, T. Günter, W. Eberhardt, A. Zimmermann, V. Geneiss, Tobias Lüke, C. Hedayat, Thomas Otto
{"title":"Investigation on the Influence of Injection Molding Parameters on High Frequency Permittivity up to 3 GHz on MID Thermoplastics and Reliability of Permittivity During Environmental Testing","authors":"M. Wolf, Florian Janek, T. Meissner, B. Wigger, M. Barth, T. Günter, W. Eberhardt, A. Zimmermann, V. Geneiss, Tobias Lüke, C. Hedayat, Thomas Otto","doi":"10.1109/ICMID.2018.8527007","DOIUrl":"https://doi.org/10.1109/ICMID.2018.8527007","url":null,"abstract":"This paper reports on the influence of injection molding parameters and environmental testing on the permittivity of different thermoplastic materials used in MID technology. Permittivity and dielectric loss angle measurements up to frequencies of 3 GHz were performed by using suitable resonator structures on flat test substrates fabricated by LPKF-LDS® technology. It was found that the permittivity of LCP is only negligibly affected by injection molding parameters. Furthermore, during environmental tests the best performance was observed for LCP.","PeriodicalId":333602,"journal":{"name":"2018 13th International Congress Molded Interconnect Devices (MID)","volume":"26 4","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2018-09-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"120965877","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
K. Ratautas, A. Jagminienė, I. Stankevičienė, E. Norkus, G. Račiukaitis
{"title":"Laser Assisted Selective Metallization of Polymers","authors":"K. Ratautas, A. Jagminienė, I. Stankevičienė, E. Norkus, G. Račiukaitis","doi":"10.1109/ICMID.2018.8526970","DOIUrl":"https://doi.org/10.1109/ICMID.2018.8526970","url":null,"abstract":"A new technology for circuit traces production: Selective Surface Activation Induced by Laser (SSAIL) enables to fabricate fine metallic structure on dielectric materials – polymers and glass. SSAIL contains three main steps: The first step is surface modification by laser, second – chemical activation of modified areas and the last step is metal deposition by electroless plating. A Picosecond laser was used for writing. The method has been investigated in detail for wide window of laser processing parameters. Sheet resistance measurement of finally plated sample and laser processed surface roughness measurement were carried out. This new technique can reduce production cost of circuit traces for molded interconnect devices","PeriodicalId":333602,"journal":{"name":"2018 13th International Congress Molded Interconnect Devices (MID)","volume":"1 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2018-09-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"115863653","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Jewgeni Roudenko, Julian Schirmer, M. Reichenberger, S. Neermann, J. Franke
{"title":"Influence of convection sintering parameters on electrical conductivity and adhesion of inkjet-printed silver nanoparticle inks on flexible substrates","authors":"Jewgeni Roudenko, Julian Schirmer, M. Reichenberger, S. Neermann, J. Franke","doi":"10.1109/ICMID.2018.8527048","DOIUrl":"https://doi.org/10.1109/ICMID.2018.8527048","url":null,"abstract":"In this study two different silver nanoparticle inks were characterized by thermogravimetric analysis to define promising sintering temperatures. The inks were printed on flexible polyimide as well as polyethylene terephthalate substrates. Online electrical resistance measurements of printed lines were conducted to specify certain durations for each sintering temperature. Printed Van der Pauw structures were sintered according to the determined parameter sets to investigate the influence of sintering temperature and duration on the adhesion. Sintering at temperatures less or equal to the maximum evaporation rate leads to an increasing adhesion on PI with prolonged sintering duration. Sintering above the maximum evaporation rate, leads to a fast increasing adhesion on PI peaking around 3 N/mm2 and decreasing with prolonged sintering duration. The increase of adhesion is slower than the decrease of the electrical resistance. Hence,thermogravimetric analysis can be used to determine the target-aimed sintering temperatures, which can be evaluated regarding adhesion and electrical resistance in further experiments to find sufficient adhesion, electrical resistance with an acceptable sintering duration. On PET the adhesion decreases with increasing sintering duration for both inks, which might originate from a chemical degradation. Thus, adhesion of printed structures on PI and PET could not be compared by the pull-off test.","PeriodicalId":333602,"journal":{"name":"2018 13th International Congress Molded Interconnect Devices (MID)","volume":"78 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2018-09-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"127272783","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Electrical and Mechanical Qualification of Selectively Dispensed Active Brazes","authors":"T. Stoll, J. Franke","doi":"10.1109/ICMID.2018.8526981","DOIUrl":"https://doi.org/10.1109/ICMID.2018.8526981","url":null,"abstract":"This paper reveals a study on selectively dispensed active brazing pastes on alumina with respect to mechanical and electrical qualifications. A Cu5Ti-alloy (5 wt% Ti) as well as 90Cu2Al3Si5Ti are used as dispensable brazing pastes in the present study. In the electronic industry circuit carriers are commonly manufactured with the Direct Bonded Copper (DBC)- or Active Metal Brazing (AMB) -process which join copper layers/sheets to the substratum. An alternative is the dispensing process which is operated with an air pressure based system for continuous and flexible conductive brazing paste placement on ceramic substrates. The produced specimens were subject to mechanical testing of the adhesion strength of the braze by soldering alumina cubes on alumina substrates and sheared off, whereas the electrical testing is conducted by the four-point-method to determine the electrical resistivity of the applied electrical paths. Reachable adhesive strengths go up to 38 N/mm2 with a specific electrical resistivity of about","PeriodicalId":333602,"journal":{"name":"2018 13th International Congress Molded Interconnect Devices (MID)","volume":"70 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2018-09-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"115708497","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}