C. Yadav, S. Frégonèse, M. Deng, M. Cabbia, M. De matos, T. Zimmer
{"title":"On the Variation in Short-Open De-embedded S-parameter Measurement of SiGe HBT upto 500 GHz","authors":"C. Yadav, S. Frégonèse, M. Deng, M. Cabbia, M. De matos, T. Zimmer","doi":"10.23919/GEMIC.2019.8698153","DOIUrl":"https://doi.org/10.23919/GEMIC.2019.8698153","url":null,"abstract":"In this paper, we present a possible variability issue in thru-reflect-line (TRL) calibrated short-open de-embedded S-parameters of SiGe HBT upto 500 GHz. The effect of the variability in the S-parameters is also investigated and presented for some HBT characteristics. The reason behind the variability in the de-embedded S-parameters of the HBT is discussed and is attributed to on-wafer TRL calibrated S-parameters of de-embedding test structures. In addition, two different analysis are presented to select the most suitable reflect in on-wafer TRL calibration for de-embedding structures used in the short-open de-embedding. The selection analysis are based on the de-embedding structures 1) on-wafer TRL calibrated S-parameters and 2) similarity between electric field distribution in reflect and the de-embedding structures using electromagnetic simulation.","PeriodicalId":312331,"journal":{"name":"2019 12th German Microwave Conference (GeMiC)","volume":"51 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2019-03-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"115200764","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
T. Ruess, K. Avramidis, G. Gantenbein, Z. Ioannidis, S. Illy, J. Jin, Felix-Christopher Lutz, A. Marek, S. Ruess, T. Rzesnicki, M. Thumm, D. Wagner, J. Weggen, J. Jelonnek
{"title":"Automated Generation of High-Order Modes for Tests of Quasi-Optical Systems of Gyrotrons for W7-X Stellarator","authors":"T. Ruess, K. Avramidis, G. Gantenbein, Z. Ioannidis, S. Illy, J. Jin, Felix-Christopher Lutz, A. Marek, S. Ruess, T. Rzesnicki, M. Thumm, D. Wagner, J. Weggen, J. Jelonnek","doi":"10.23919/GEMIC.2019.8698142","DOIUrl":"https://doi.org/10.23919/GEMIC.2019.8698142","url":null,"abstract":"A test system for the verification of the quasi-optical converter system is vital in the gyrotron development. For this reason, an automated measurement setup has been developed and is benchmarked with the TE28,8 mode operating in the cavities of the gyrotrons of W7-X with a high purity of about 95 % and a counter-rotating amount of about 0.3 %. The time duration for the mode generator adjustment has been reduced to two days for this mode. After a successful mode excitation, the quasi-optical mode converter, consisting of a launcher and three mirrors, is measured having a vectorial Gaussian mode content of 97 %.","PeriodicalId":312331,"journal":{"name":"2019 12th German Microwave Conference (GeMiC)","volume":"70 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2019-03-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"122649470","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"76GHz band Rat-Race Circuit Utilizing Composite Right-/Left-Handed Transmission Line without Chip Elements","authors":"R. Nakano, T. Kawai, A. Enokihara","doi":"10.23919/GEMIC.2019.8698195","DOIUrl":"https://doi.org/10.23919/GEMIC.2019.8698195","url":null,"abstract":"Screen printing technology using silver nanoparticle ink with high conductivity attracts attention as a technology for fabricating low-loss transmission lines in high frequency band such as millimeter-wave band. Its effectiveness has been confirmed in millimeter-wave band exceeding 100 GHz [1]. This paper describes a 180-degree rat-race circuit (RRC) utilizing composite a right-/left-handed transmission line (CRLH-TL) composed of lumped elements at 76 GHz band in order to confirm the reliability of circuit components by utilizing the screen printing technology. The proposed RRC consists of three right-handed transmission lines (RH-TLs) and a CRLH-TL. Conventionally, it has also been the mainstream to use chip elements for these lumped elements, however the proposed circuit consists of only transmission lines without them. For 76 GHz band, the designed −10 dB RRC with the CRLH-TL can realize compact size and practical characteristics. Effectiveness of the design method was confirmed by using a commercially electromagnetic field simulator (ANSYS HFSS).","PeriodicalId":312331,"journal":{"name":"2019 12th German Microwave Conference (GeMiC)","volume":"66 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2019-03-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"128519134","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"A 44fs RMS Jitter 6GHz Limiting Amplifier in 22nm CMOS FDSOI","authors":"Marcel Runge, P. Scholz, F. Gerfers","doi":"10.23919/GEMIC.2019.8698183","DOIUrl":"https://doi.org/10.23919/GEMIC.2019.8698183","url":null,"abstract":"This paper presents a low-power, low-noise limiting amplifier for ultra low-noise wide-band clock regeneration. The proposed limiting amplifier was fabricated in 22 nm CMOS FD-SOI and reveals an outstanding measured 44 fs RMS clock jitter performance at 6GHz signal frequency consuming only 9.6 mW power at 0.9 V supply voltage and an area of 0.0021 mm2. Given a 48 dB open loop gain as well as a unity gain bandwidth of 35 GHz of the limiting amplifier, a small differential sine-wave with signal level of −9.5 dBm (300 mVppd) is sufficient to generate clock signals with < 50 fs RMS clock jitter. Given the superior noise performance of the proposed amplifier in conjunction with 22 nm CMOS FDSOI, the ultra-low noise clock generation as well as the data converter can be integrated in a single-chip solution incorporating compact, low-cost > 1 GS/s high-resolution data converter systems with a jitter induced signal-to-noise ratio of > 60 dB (10 bit ENOB). Thus, 22 nm CMOS FDSOI is a promising vehicle for high bandwidth, high-resolution data converters with on-chip clock generation.","PeriodicalId":312331,"journal":{"name":"2019 12th German Microwave Conference (GeMiC)","volume":"13 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2019-03-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"126515567","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Antenna Selection Performance of Distributed Antenna Systems in Full-Duplex Indoor Base Station","authors":"Nidal Zarifeh, Mai Alissa, T. Kreul, T. Kaiser","doi":"10.23919/GEMIC.2019.8698126","DOIUrl":"https://doi.org/10.23919/GEMIC.2019.8698126","url":null,"abstract":"The work in this paper is trying to answer the question: In a full-duplex indoor base station with antenna selection, what are the benefits of using distributed antennas instead of co-located antennas? In other words, how much the use of distributed antennas would contribute in mitigating the self-interference in the full-duplex system. A ray-tracing tool is used to characterize the indoor multi-path channel environment. Subsequently, a baseband analysis is done to evaluate the performance of the full-duplex system. The distributed antenna system slightly outperforms the co-located system in the studied scenario.","PeriodicalId":312331,"journal":{"name":"2019 12th German Microwave Conference (GeMiC)","volume":"67 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2019-03-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"127142056","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Fabian Schwartau, S. Preussler, Markus Krueckemeier, F. Pfeiffer, Hannes Stuelzebach, T. Schneider, J. Schoebel
{"title":"Modular Wideband High Angular Resolution 79 GHz Radar System","authors":"Fabian Schwartau, S. Preussler, Markus Krueckemeier, F. Pfeiffer, Hannes Stuelzebach, T. Schneider, J. Schoebel","doi":"10.23919/GEMIC.2019.8698121","DOIUrl":"https://doi.org/10.23919/GEMIC.2019.8698121","url":null,"abstract":"This paper demonstrates a modular 79 GHz radar system based on the Texas Instruments AWR1243 radar chip. The modules are synchronized with a radio-over-fiber link to allow the combination of many modules and thus large apertures. A large aperture results in a high angular resolution, which is the key requirement for object classification at long ranges. We describe the coherent synchronization, the chosen antenna pattern, a genetic algorithm to optimize antenna weights and the overall system design. Finally, we demonstrate the capabilities of the system with measurements of a test set up.","PeriodicalId":312331,"journal":{"name":"2019 12th German Microwave Conference (GeMiC)","volume":"1 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2019-03-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"125407415","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"An Integrated VCO with Frequency Tripler in SiGe BiCMOS with a 1-dB Bandwidth from 22 GHz to 32 GHz for Multiband 5G Wireless Networks","authors":"F. Herzel, G. Panic, J. Borngräber, D. Kissinger","doi":"10.23919/GEMIC.2019.8698128","DOIUrl":"https://doi.org/10.23919/GEMIC.2019.8698128","url":null,"abstract":"We present a 9 GHz wideband voltage-controlled oscillator (VCO) integrated with a frequency tripler on a single chip. The circuit can generate frequencies from 21.3 GHz to 32.1 GHz with a phase noise between −122 and −114 dBc/Hz at 10 MHz offset from the carrier. The 1-dB bandwidth is from 22 GHz to 32 GHz with an output power between −13 dBm and −12 dBm. Using a direct-conversion or a sliding-IF transceiver frontend architecture, various 5G frequency bands between 24 GHz and 40 GHz can be addressed. The chip occupies an area of 1.5 mm2 and dissipates 95 mA from a 3.3 V supply.","PeriodicalId":312331,"journal":{"name":"2019 12th German Microwave Conference (GeMiC)","volume":"7 Sect Study Dis Child 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2019-03-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"116537606","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}