{"title":"Numerical Computation of Surface Melting at Imperfect Electrical Contact between Rough Surfaces","authors":"W. Kim, Q.J. Wang","doi":"10.1109/HOLM.2006.284069","DOIUrl":"https://doi.org/10.1109/HOLM.2006.284069","url":null,"abstract":"This paper presents a surface melting model by means of numerical simulation of three-dimensional imperfect electrical contact (ImPEC) between rough surfaces in a high electrical current application. The continuous convolution and fast Fourier transform (CC-FFT) and discrete convolution and fast Fourier transform (DC-FFT) algorithms with the conjugated gradient method (CGM) for pressure iteration are applied to solve the surface melting problem under thermo-electro- mechanically coupled ImPEC conditions. The computational result suggests that asperity melting by Joule heating of electron tunneling through a surface oxide film layer may be initiated in a very short time interval if the apparent current density is extremely high. Averaged asperity melting speeds at molten contact asperities are also predicted by means of simulated asperity melting heights.","PeriodicalId":304571,"journal":{"name":"Electrical Contacts - 2006. Proceedings of the 52nd IEEE Holm Conference on Electrical Contacts","volume":"1 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"1900-01-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"129490175","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"A Study of Metal Fiber Brush Operation on Slip Rings and Commutators","authors":"L. Brown, D. Kuhlmann-wilsdorf, W. Jesser","doi":"10.1109/holm.2006.284092","DOIUrl":"https://doi.org/10.1109/holm.2006.284092","url":null,"abstract":"A research apparatus was designed for use in an investigation to compare the current conduction and wear behavior of metal fiber brushes on commutators and slip rings. To this end, metal fiber brushes were operated, while conducting direct current, on gold-plated copper rotors with and without unfilled gaps to simulate slip rings and commutators, respectively. Results of measurements and conclusions are presented in Part II.","PeriodicalId":304571,"journal":{"name":"Electrical Contacts - 2006. Proceedings of the 52nd IEEE Holm Conference on Electrical Contacts","volume":"1 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"1900-01-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"130148719","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Nanoscale Mechanical Properties of Intermetallics in Lead-Free Systems","authors":"M. Braunovic, D. Gagnon, L. Rodrigue","doi":"10.1109/holm.2006.284074","DOIUrl":"https://doi.org/10.1109/holm.2006.284074","url":null,"abstract":"Bimetallic couples formed between commercially available lead free alloys and selected contact materials were subjected to diffusion annealing using thermal gradients. Following diffusion annealing and ageing, the contact interfaces were subjected to a detailed metallographic, Scanning Electron Microscope (SEM), Energy Dispersive X-Ray (EDX) analyses. In addition, electrical resistance was used for electrical characterization of the intermetallics formed at the contact interfaces whereas nanoindentation technique was used to determine the nanoscale mechanical properties. An attempt was made to correlate the observed nanoindentation data with the microstructures of the intermetallic phases formed and electrical resistivity.","PeriodicalId":304571,"journal":{"name":"Electrical Contacts - 2006. Proceedings of the 52nd IEEE Holm Conference on Electrical Contacts","volume":"1 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"1900-01-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"130301334","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
H. Fujita, K. Fukuda, K. Sawa, M. Tomita, M. Murakami, N. Sakai, I. Hirabayashi
{"title":"Contact Resistance Characteristics of High Temperature Superconducting Bulk - Part V","authors":"H. Fujita, K. Fukuda, K. Sawa, M. Tomita, M. Murakami, N. Sakai, I. Hirabayashi","doi":"10.1109/holm.2005.1518256","DOIUrl":"https://doi.org/10.1109/holm.2005.1518256","url":null,"abstract":"A persistent current switch (PCS) is used for superconducting applications, such as superconducting magnetic energy storage (SMES) system. The authors have proposed a mechanical switch of Y-Ba-Cu-O (YBCO) bulk as a mechanical PCS. In this paper, the authors measured the contact resistance of Ag block with convex curvature and Ag- deposited YBCO sample (dAg/YBCO) in order to study in more depth about the effect of the deposited Ag, contributed greatly for reduction of the residual resistance. As the results of experiments and simulation using FEM, it became clear that it was effective for reducing the residual resistance from a point of increasing the contact area by depositing Ag on contact surface. In addition, it was assumed that the main origin of the residual resistance were the constriction resistance depending on the contact area and the deposited Ag resistance proportional to the layer thickness. Therefore, the thickness of the deposited Ag layer had the optimal value, was 0.60 mum in this case. These results may also lead to support to design the mechanical PCS in the future.","PeriodicalId":304571,"journal":{"name":"Electrical Contacts - 2006. Proceedings of the 52nd IEEE Holm Conference on Electrical Contacts","volume":"70 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"1900-01-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"126240439","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}