Наукові праці Державного науково-дослідного інституту випробувань і сертифікації озброєння та військової техніки最新文献

{"title":"MILITARY ECOCIDE IN UKRAINE AS A DESTRUCTIVE CONSEQUENCE OF THE USE OF RUSSIAN MISSILES AND PROJECTILES","authors":"V. Kuzmenko, N. Tretiak, V. Chornai, I. Yarysh","doi":"10.37701/dndivsovt.19.2024.08","DOIUrl":"https://doi.org/10.37701/dndivsovt.19.2024.08","url":null,"abstract":"Effectively, russia’s aggression against Ukraine can be considered the first case of intentional ecocide during wartime in this century. Through its actions, russia has caused massive destruction of the animal and plant world, pollution of the atmosphere, Ukrainian fertile lands, and water resources. According to calculations by the working group at the State Environmental Inspection, as of January 2023, the ecological damage to Ukraine during the 11 months of russian military aggression amounts to over 1 trillion 743 billion hryvnias, or over 47.6 billion dollars. This sum includes hundreds of thousands of square kilometers of ruined soil and devastated lands, forest fires, emissions of poisonous substances into the atmosphere, destruction of animals, alterations to the migratory paths of birds, and more. The top five regions most affected by ecocide in Ukraine are Dnipropetrovsk, Kharkiv, Mykolaiv, Donetsk, and Zaporizhzhia regions. \u0000The study of war ecocide crimes allows to systematise them by the following features: air pollution, soil pollution, destruction of green spaces, destruction of wildlife, water pollution, unauthorized use of subsoil, and disruption of ecosystems Since the beginning of the full-scale armed aggression by russian occupation forces on objects within the 71 territory of Ukraine, almost 6,500 missile strikes and nearly 3,500 aerial strikes have been carried out, resulting in environmental damage. \u0000Missiles launched onto Ukrainian territory carry hundreds and thousands of kilograms of chemical substances. In case of complete combustion and dispersion of remnants into the surrounding environment, they pose significant pollution and are toxic to all living beings. \u0000The destruction of the upper fertile layer of soil, which has been forming over centuries, occurs as a result of missile explosions, artillery shells of various types, cluster bombs, drones, mines, and various types of multiple rocket launchers. \u0000A significant problem is the contamination of soil with chemical substances, leading to a reduction in fertility and causing harm to both humans and animals living in polluted areas. In substantial areas of Ukraine, there is considerable damage to the surface layer of the soil due to the burning of munitions. The detonation of missiles, artillery shells, cluster bombs results in the release of carbon monoxide, carbon dioxide, water vapor, nitrogen oxides, formaldehyde, hydrogen cyanide, nitrogen, as well as a large amount of toxic organic compounds, which then enter the soil. \u0000According to assessments from the Kyiv School of Economics and Zoï Environment Network, a total of 186,000 km2 of land, nearly 31% of Ukraine's territory, is at risk of damage and pollution. Among them, over 20,000 km2 are damaged by more than 75% In addition to missiles, the aggressor country employs projectiles of various calibers and cluster bombs, the detonation of which causes environmental destruction, including damage to buildings, structure","PeriodicalId":295147,"journal":{"name":"Наукові праці Державного науково-дослідного інституту випробувань і сертифікації озброєння та військової техніки","volume":"142 ","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-04-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"140766568","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"ANALYSIS OF THE CHARACTERISTICS AND CAPABILITIES OF MODERN VIBRATION AND STRAIN GAUGES OF MODERN MEASURING EQUIPMENT","authors":"Ye. Huzii, P. Arkushenko, М. Andrushko, A. Sadaiev","doi":"10.37701/dndivsovt.19.2024.04","DOIUrl":"https://doi.org/10.37701/dndivsovt.19.2024.04","url":null,"abstract":"The article analyses the characteristics and capabilities of modern vibration and strain gauges, as well as the existing requirements for vibration measurement devices for wheeled armoured vehicles. The main physical parameters for assessing the strength and vibration characteristics of wheeled armoured vehicles to be measured are determined. Modern accelerometers for measuring vibration have better universal characteristics compared to other types of sensors, as well as a wide frequency and dynamic linearity range. The use of piezoelectric, strain gauge, magnetic induction and laser measuring equipment will allow to obtain physical values of vibration parameters and the stress-strain state of wheeled armoured vehicles and, using data acquisition systems and software, to analyse deviations of limit values in the design and components of the vehicle. \u0000Improvement of the methodological apparatus for experimental studies of strength and vibration characteristics during testing of wheeled armoured vehicles will improve the quality and simplify the measurement process, which in turn will significantly reduce the time for testing prototypes and ensure timely delivery of weapons and military equipment (components) to the Armed Forces of Ukraine. The use of modern vibration and strain gauges to assess the strength and vibration characteristics of structures and their components will simplify and automate the measurement process, minimising possible errors during testing of armoured vehicles. The results of the work can be used for a rational and justified selection of vibration and strain gauges for testing wheeled armoured vehicles.","PeriodicalId":295147,"journal":{"name":"Наукові праці Державного науково-дослідного інституту випробувань і сертифікації озброєння та військової техніки","volume":"125 3","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-04-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"140787550","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"ANALYSIS OF THE PROCEDURE FOR ORDERING RESEARCH AND DEVELOPMENT PROCUREMENT (R&D) IN THE INTERESTS OF THE ARMED FORCES OF UKRAINE ON THE TERRITORY OF UKRAINE AND ABROAD","authors":"A. Vlasov, O. Matiushchenko, I. Gukov, O. Yakymovych","doi":"10.37701/dndivsovt.19.2024.02","DOIUrl":"https://doi.org/10.37701/dndivsovt.19.2024.02","url":null,"abstract":"Research and development (R&D) orders have a significant impact on the production and modernization of weapons and military equipment in Ukraine, and given the nature of current threats and strategic challenges, continued investment in research and development is key to maintaining effective defense and national security. R&D is an integral part of the unified innovation process \"from idea to implementation\", during which the results of R&D or acquired knowledge and experience are implemented in technical documentation to create prototypes of products that precede their mass production. However, the analysis of the regulatory framework of the current legislation on the organization of ordering R&D in the interests of the Armed Forces of Ukraine shows that currently there is no effective algorithm for ordering R&D abroad in the interests of the Armed Forces of Ukraine, and cases of ordering R&D are an exception and, as a rule, do not have a clear justification and implementation mechanism. Therefore, the issue requires cooperation at different levels and with different structures within the Ministry of Defense of Ukraine and the Armed Forces of Ukraine. In order to establish cooperation with foreign partners in the field of scientific and technical cooperation, there is an urgent need to harmonize national regulations on military products with international and NATO standards. In addition, coordination should be carried out systematically with the involvement of all stakeholders to ensure the successful ordering of R&D and the fulfillment of tasks, taking into account the requirements of other countries or partners, which is a key aspect of effective coordination at the international level. Therefore, there is a need to develop legal and regulatory documents that would regulate the ordering procedure and interaction of participants in the process of ordering and performing R&D in the interests of the Armed Forces of Ukraine abroad, to improve legislation and other regulations to a single conceptual, structural, functional and substantive understanding of the essence of the procedure for ordering R&D abroad. \u0000The article analyzes the legal framework of the process of ordering R&D in the interests of the Armed Forces of Ukraine, analyzes the scheme of ordering R&D in Ukraine, and provides proposals for organizing the ordering of R&D in the interests of the Armed Forces of Ukraine abroad.","PeriodicalId":295147,"journal":{"name":"Наукові праці Державного науково-дослідного інституту випробувань і сертифікації озброєння та військової техніки","volume":"193 ","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-04-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"140764694","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"MODEL OF FORMATION OF DECISIVE FUNCTION OF COMBINED CORRELATION-EXTREME NAVIGATION SYSTEM USED IN GUIDANCE OF UNMANNED AIRCRAFT","authors":"O. Sotnikov, V. Tiurina","doi":"10.37701/dndivsovt.19.2024.15","DOIUrl":"https://doi.org/10.37701/dndivsovt.19.2024.15","url":null,"abstract":"The results of development of formalized model of process of formation of decisive function of combined correlation-extreme navigation system of unmanned aerial vehicles are presented. The development of the model is carried out taking into account the state of the operational and tactical situation, as well as the effect of changing the geometry of the sighting. The peculiarity of the developed model consists in the formation of a decisive function using a set of reference images, which is necessary for the formation of a decisive function, the set of reference images is built taking into account changes in navigation parameters of an unmanned aerial vehicle and angular orientation parameters. \u0000The originality of the formalized model consists in the determined order of formation of the decisive function of the combined correlation-extreme navigation system, which, unlike the known ones, consists in step-by-step determination of coordinates of the reference object by clarifying the navigation parameters of unmanned aerial vehicles with subsequent refinement of the angular orientation parameters according to the following sequence: determining the height of formation of the current image, determining the angles of view and determining the angular orientation parameters. Each of the individual reference images corresponds to its own multidimensional matrix of luminance values of the corresponding pixels or radio-thermal temperature. This takes into account the area of objects located on the sighting surface, which leads to refinement of the coordinates of the reference object in the current image. \u0000Changes in the spatial position and orientation of unmanned aerial vehicles, geometric properties of the sighting surface, as well as taking into account variations in informative features of the sighting surface objects depending on external factors and the influence of the medium on the propagation of signals in the optical and radiometric ranges of waves and obstacles, which will reduce or completely eliminate the discrepancy of coordinates of the reference object to the current image determined in advance in the reference image.","PeriodicalId":295147,"journal":{"name":"Наукові праці Державного науково-дослідного інституту випробувань і сертифікації озброєння та військової техніки","volume":"178 11","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-04-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"140783475","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"FORCE CALCULATION OF THE ABENICS ACTIVE HINGE OF THE MANIPULATOR-MOTOR OF THE MULTI-PURPOSE ROBOTIC PLATFORM","authors":"V. Zalypka","doi":"10.37701/dndivsovt.19.2024.05","DOIUrl":"https://doi.org/10.37701/dndivsovt.19.2024.05","url":null,"abstract":"It has been established that the prerequisite for multi-purpose robotic platform (MPRP), which determines the use of a manipulator-mover with an active Abenics joint, is, first of all, road conditions (locality), because in field conditions or as a result of missile and artillery damage, such extreme conditions occur when the movement on the main mover is impossible and there is a need to involve auxiliary (additional) mechanisms. The design features of the Abenics technology were analyzed and its advantages in providing three degrees of freedom at one point of contact were clarified. On the basis of the provisions of the theory of machine parts and the Solid Works software, the strength calculation of the Abenics hinge was carried out, namely: allowable contact fatigue stresses 412 MPa, allowable bending stresses 267 MPa; circular Ft 683 N and radial Fr 247,9 N forces in engagement. The transmission was checked for contact stress strength H 407,6 MPa and for the bending strength of the wheel teeth in 41,95 MPa; the torque around the Abenics active joint is determined in Mкрш 136 Nm. The distribution of stresses relative to the faces to which a force of 683 N was applied is graphically presented. The manipulators-movers in which the Abenics active hinge will be used, with the above results, will have a load capacity of 150-200 kg, which makes it possible to evacuate a wounded soldier with equipment or deliver corresponding load on the front edge (firing positions). Thus, the approach proposed by the author can be the basis for the creation of new promising MPRPs with increased operational properties such as passability and stability, because their manipulators will be able, if necessary, to perform the function of a stepping or wheel drive. It is proposed to first of all implement the capabilities of Abenics technology on MPRPs of rear, technical and medical support, which will not require additional stabilization of their hull in comparison with combat and special ground robotic complexes. In the future, the same technology can be applied in the field of mobile robotics, because it allows you to design the connection of links (kinematic pairs) of the manipulator on an active ball joint, that is, at one point, while increasing the efficiency of the operation of the manipulator by reducing the consumption of resources.","PeriodicalId":295147,"journal":{"name":"Наукові праці Державного науково-дослідного інституту випробувань і сертифікації озброєння та військової техніки","volume":"387 1","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-04-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"140775781","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"RESULTS OF THE EXPERIMENT USING NAVIGATIONAL ANTENNAS WITH CONTROLLED RECEPTION PATTERN ANTENNA FOR UAVS IN AREAS OF ACTIVE SUPPRESSION BY ELECTRONIC WARFARE MEANS","authors":"A. Los, O. Zhyrna","doi":"10.37701/dndivsovt.19.2024.09","DOIUrl":"https://doi.org/10.37701/dndivsovt.19.2024.09","url":null,"abstract":"The article describes the trends in development, tactics, composition, and construction of Russia's electronic warfare means, as well as the primary objectives of interference. It describes methods effectively employed on the battlefield to reduce the impact of enemy EW assets on the navigation data quality of UAVs (Unmanned Aerial Vehicles). The general concept of using CRPA (Controlled Reception Pattern Antenna) for military users' navigation is outlined. \u0000Experiments were conducted to assess the influence of EW means on one of the most popular CRPAs with four antenna elements in real conditions of active combat. Flights were carried out simultaneously by two UAVs, the first equipped with CRPA and the second integrated with a standard GNSS receiver. The flights were conducted under identical conditions, simultaneously conducting reconnaissance of the same targets. Data on the average height loss of navigation signal reception for UAVs were obtained. \u0000According to the experiment results, the integration of CRPA with four antenna elements can be effective for strike UAVs with weapon release systems that require precise positioning for target engagement, provided that the flight altitude of such UAVs does not exceed 150-250 meters in areas with minimal enemy EW interference. Otherwise, it is recommended to use CRPA with 8 or more elements or explore other promising technologies. \u0000Recommendations for integrating the aforementioned antennas are developed, and the accompanying issues associated with their application are discussed. The article also outlines options for expanding CRPA integration capabilities and ways to upgrade their software and hardware components.","PeriodicalId":295147,"journal":{"name":"Наукові праці Державного науково-дослідного інституту випробувань і сертифікації озброєння та військової техніки","volume":"63 32","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-04-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"140795106","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"ANALYSIS OF THE POSSIBILITIES OF USING IOT FOR MILITARY PURPOSES","authors":"Y. Tertyshnik, O. Potapov, A. Mishok, A. Andrushko","doi":"10.37701/dndivsovt.19.2024.17","DOIUrl":"https://doi.org/10.37701/dndivsovt.19.2024.17","url":null,"abstract":"The most notable change in the era of modern warfare is that information has become the most effective weapon of all. Situational awareness, based on collected information, has become the core of every military operation. Information operations, an integrated network of sensors, weapon systems and platforms have become a force multiplier. New technologies, tools and processes have established the concept of network-centric warfare. \u0000The concept of the Internet of Things is one of the answers to these questions. Internet of Things is widely developed throughout the world, particularly in civilian and military applications. \u0000Objects and things can be recognized and used to make contextual decisions by aggregating information and sharing with other objects. \u0000Using Internet of Things technologies, the State can work more efficiently and effectively by integrating sensor systems, actuators and control systems with current military and civilian infrastructure. \u0000The purpose of the article is to analyzte the possibilities of using Internet of Things technologies for military purposes, as well as to identify related security challenges and potential countermeasures, focusing on devices and technologies used in the military sphere.","PeriodicalId":295147,"journal":{"name":"Наукові праці Державного науково-дослідного інституту випробувань і сертифікації озброєння та військової техніки","volume":"100 ","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-04-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"140768937","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"THEORETICAL APPROACHES TO THE SELECTION OF DETECTION METHODS OF EXPLOSIVE DEVICES IN ENVIRONMENTS THAT CONCEAL THEM, ADVANTAGES AND DISADVANTAGES","authors":"V. Krivtsun, V. Lyashenko","doi":"10.37701/dndivsovt.19.2024.10","DOIUrl":"https://doi.org/10.37701/dndivsovt.19.2024.10","url":null,"abstract":"The results of the analysis of trends in the development of armed struggle indicate the ever-increasing role of the use of mine weapons. At the same time, there is a significant imbalance between the development of mine weapons and detection means, which in turn causes a number of problematic issues in demining. It is noted that due to the aggression of the russian federation, Ukraine has become the most mined country in the world. In addition to the problem of demining the contaminated territory with explosive objects, the issue of reconnaissance of the area for mines and making passages in enemy minefields has become acute. \u0000The paper analyzes the demining process, identifies the factors that influence it, and presents the main demasking factors of explosive objects, as well as the performance of terrain demining tasks. Taking into account these features, theoretical approaches to the detection and identification of explosive objects based on various physical principles are considered. An analysis of the use of the main methods of detection and identification of explosive objects is carried out, their advantages and disadvantages are determined. \u0000Based on the analysis of theoretical approaches, a generalized characterization of the main methods of detecting explosive objects is given. It is noted that, taking into account the experience of performing demining tasks in the war of the russian federation against Ukraine, the main methods of searching for explosive objects are contact, mechanized, induction, optical, thermal and in some cases biophysical. Today, the use of advanced explosive detection methods is limited by the need to solve technical problems to reduce the number of false signals. The paper notes that in order to increase the efficiency of the process of detecting explosive objects and ensure proper safety, it is advisable to combine detection methods, as well as combine them with remotely controlled (robotic) means, as well as UAVs.","PeriodicalId":295147,"journal":{"name":"Наукові праці Державного науково-дослідного інституту випробувань і сертифікації озброєння та військової техніки","volume":"46 18","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-04-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"140771231","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"WAYS TO REDUCE THE IMPACT OF PULSATIONS IN LOCAL POWER SUPPLY ROBOTIC SYSTEMS","authors":"V. Skuhariev, O. Svitak, V. Yasko","doi":"10.37701/dndivsovt.19.2024.14","DOIUrl":"https://doi.org/10.37701/dndivsovt.19.2024.14","url":null,"abstract":"An analysis of the changes in the flow of pulsation transforming the energy-dynamic indicators of on-board power electronics systems has shown that there are several options for solving this problem. \u0000The article outlines the main options for the current problem of pulsation in the energy systems of autonomous electrical systems, such as UAVs, robotic complexes, and other systems. The effectiveness of changes in pulsation is examined, in addition to directly assessing the effectiveness of stagnation strategies and methods. Also in the statistics, the optimal technical solutions for specific operating minds were identified. \u0000The prospects and future directives have been predicted based on the proposals for further research in the sphere of changes in pulsation in local life systems. \u0000In the future, it is predicted and supported by the development of technology and innovation in this country. \u0000To sum up, we can say that the statistics have analyzed the changes in pulsation in robotic local power supply systems, which is one of the key directions in the field of electrical engineering and electronics. Increased attention to this problem is due to the need for assured stability, reliability and greater energy efficiency of electronic systems. Research in this area is aimed at developing more comprehensive methods and strategies for reducing noise and pulsation in electrical systems. \u0000Assessing the effectiveness of stagnant methods, promoting the development of new technologies and innovation, as well as developing promising directions in this field opens the way to creating more stable and adaptive living systems. Replacement of advanced electronic filters, voltage stabilizers, selection of new materials and components, integration of intelligent energy management systems and optimization of essential energy resources local power supply systems – the whole purpose is to directly conduct further investigations. \u0000The growing demand for stable and efficient electronic systems is driven by current research and the introduction of new technologies to change pulsation. Technological developments and scientific research in this area open up broad prospects for reducing the power supply and ensuring the stability of the functioning of modern electronic devices.","PeriodicalId":295147,"journal":{"name":"Наукові праці Державного науково-дослідного інституту випробувань і сертифікації озброєння та військової техніки","volume":"74 27","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-04-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"140794575","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"PECULIARITIES OF PREPARATION (SUPPORT) OF DRAFTS OF CERTAIN LEGISLATIVE ACTS","authors":"M. Kriukov","doi":"10.37701/dndivsovt.19.2024.11","DOIUrl":"https://doi.org/10.37701/dndivsovt.19.2024.11","url":null,"abstract":"The article examines procedural issues at various stages of interaction between a representative of the Ministry of Defense, as an interested body, and specialists of an executive body, as a developer, during the preparation and submission of draft legislative acts for consideration by the Government. \u0000The purpose of the article is to develop a variant of the functional scheme of interaction between the interested body and the developer of a legislative act with a view to enhancing the level of knowledge and skills of officials in the course of monitoring of approval procedures in order to improve the quality of processing of documentary materials on these issues. \u0000The proposed variant of the functional scheme of interaction is of practical importance and will be useful in the structural subdivisions of the Ministry of Defense of Ukraine (the Armed Forces of Ukraine) during the coordination procedures and ensuring effective support of draft legal acts developed by executive authorities and sent to the Ministry of Defense for approval. \u0000The methodological material presented in this article with the appropriate degree of unification may be recommended to employees of the structural subdivisions of the Ministry of Defense of Ukraine (the Armed Forces of Ukraine) for use in their official activities.","PeriodicalId":295147,"journal":{"name":"Наукові праці Державного науково-дослідного інституту випробувань і сертифікації озброєння та військової техніки","volume":"971 1","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-04-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"140761342","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}