Caroline S. Soares, Pranay Baikadi, A. Rossetto, M. Pavanello, D. Vasileska, G. Wirth
{"title":"Modeling Quantum Confinement in Multi-Gate Transistors with Effective Potential","authors":"Caroline S. Soares, Pranay Baikadi, A. Rossetto, M. Pavanello, D. Vasileska, G. Wirth","doi":"10.1109/SBMICRO55822.2022.9881047","DOIUrl":"https://doi.org/10.1109/SBMICRO55822.2022.9881047","url":null,"abstract":"Particle-based Monte Carlo device simulators are an efficient tool to investigate the performance and reliability of transistors. The semiclassical theoretical model employed in the Monte Carlo device simulator is unsuccessful to describe some aspects of the multi-gate transistors that come from the quantum behavior of charge carriers. To take into consideration the space-quantization effects in these simulators, a quantum correction is necessary. We propose to include an effective potential in the Monte Carlo device simulator to address the wave-like behavior of electrons in n-type silicon FinFET and n-type silicon nanowire transistors. The effective potential has a unique parameter, which can be adjusted to find a line density using an Effective Potential-Poisson solver that matches with the line density calculated using a Schrodinger-Poisson solver. We demonstrated that using the effective potential model, the effect of the electron confinement is well described.","PeriodicalId":282991,"journal":{"name":"2022 36th Symposium on Microelectronics Technology (SBMICRO)","volume":"11 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2022-08-22","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"131487343","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Experimental Analysis of MISHEMT Multiple Conductions from 200K to 450K","authors":"W. Perina, J. Martino, P. Agopian","doi":"10.1109/SBMICRO55822.2022.9881049","DOIUrl":"https://doi.org/10.1109/SBMICRO55822.2022.9881049","url":null,"abstract":"In this work, the multiple conductions of a GaN based Metal-Insulator-Semiconductor High Electron Mobility Transistor (MISHEMT) when operating in a temperature range from 200K to 450K are evaluated experimentally. It is observed that the threshold voltage decreases linearly with temperature from 200K to room temperature. For higher temperatures, there is a competition among the following effects: the bandgap narrowing, depletion depth and Fermi potential reductions, resulting in the increase of threshold voltage. The analysis of the subthreshold swing presents very high values indicating a harsh degradation. These behaviors are further investigated through the MISHEMT transconductance, which presents two different conduction mechanism (double peak) at 350 K for all channel lengths, affecting the total drain current.","PeriodicalId":282991,"journal":{"name":"2022 36th Symposium on Microelectronics Technology (SBMICRO)","volume":"35 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2022-08-22","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"126461232","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
P. Pereira, G. M. Penello, V. B. Sousa, R. Kawabata, M. Pires, P. L. Souza
{"title":"Dual-color detection using two quasi-bound states in the continuum in an InGaAs/InAlAs superlattice","authors":"P. Pereira, G. M. Penello, V. B. Sousa, R. Kawabata, M. Pires, P. L. Souza","doi":"10.1109/SBMICRO55822.2022.9881050","DOIUrl":"https://doi.org/10.1109/SBMICRO55822.2022.9881050","url":null,"abstract":"A voltage-tunable mid-infrared dual-color quantum Bragg mirror detector (QBMD) is presented. The dual-color was achieved by using two quasi-bound states in the continuum (leaky electronic states) and exploring the heterostructure asymmetry to generate leaky states with preferential directions for the electronic extraction. In photovoltaic mode, the photocurrent spectrum presents a positive peak at 340 meV and a negative one around 430 meV. Dual-color detection can be turned into single-color detection (positive or negative peak) when an external bias voltage is applied.","PeriodicalId":282991,"journal":{"name":"2022 36th Symposium on Microelectronics Technology (SBMICRO)","volume":"1750 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2022-08-22","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"129484327","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Andrei Alaferdov, R. Yoshioka, Carolina C. P. Nunes, Matheus Dias Sousa, Valdeci Carvalho, Igor Fernandes Namba, Claudemir Coral
{"title":"The Delamination Caused by Flux Residue in System-in-Package Devices","authors":"Andrei Alaferdov, R. Yoshioka, Carolina C. P. Nunes, Matheus Dias Sousa, Valdeci Carvalho, Igor Fernandes Namba, Claudemir Coral","doi":"10.1109/SBMICRO55822.2022.9880986","DOIUrl":"https://doi.org/10.1109/SBMICRO55822.2022.9880986","url":null,"abstract":"The problem of delamination in system-in-package devices was studied. It was found that this type of failure was induced by solder flux excess trapped underneath electronic components and/or around the big solder area. Several approaches to solve this problem were proposed.","PeriodicalId":282991,"journal":{"name":"2022 36th Symposium on Microelectronics Technology (SBMICRO)","volume":"290 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2022-08-22","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"132808677","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
R.A.R. Oliveira, D. D. Purificação, I. Pereyra, M. Carreño
{"title":"Characterization of silicon thin films obtained by MicroHeater MEMS based-microLPCVD technique","authors":"R.A.R. Oliveira, D. D. Purificação, I. Pereyra, M. Carreño","doi":"10.1109/SBMICRO55822.2022.9881036","DOIUrl":"https://doi.org/10.1109/SBMICRO55822.2022.9881036","url":null,"abstract":"In this work, results on silicon thin film deposition utilizing a new micro LPCVD technique, based on a MEMS-based microheater device, are presented. This micro LPCVD technique was presented and validated in previous work, where the deposition of $mumathrm{c}$-silicon from SiH4, at a pressure of 1 Torr and temperature of 739°C was demonstrated. In this work the study is furthered by Si deposition at different temperatures between 650 °C and 1054 °C and the analysis of the heated region dimensions in each case. The way the material forms along the heated region was also verified and it was observed that in the same process, amorphous, semi-crystalline, and polycrystalline phases are obtained. The temperature and thermal response of the microheaters were estimated by Multiphysics simulation and from real-time measurements of the microheaters' electrical resistance.","PeriodicalId":282991,"journal":{"name":"2022 36th Symposium on Microelectronics Technology (SBMICRO)","volume":"103 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2022-08-22","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"134192514","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
M. P. B. de Lima, M. A. P. Peixoto, M. M. Correia, E. Galembeck, S. Gimenez, L. M. Camillo
{"title":"Impact of Temperature Effects in the Zero Temperature Coefficient of the Ellipsoidal MOSFET","authors":"M. P. B. de Lima, M. A. P. Peixoto, M. M. Correia, E. Galembeck, S. Gimenez, L. M. Camillo","doi":"10.1109/SBMICRO55822.2022.9881044","DOIUrl":"https://doi.org/10.1109/SBMICRO55822.2022.9881044","url":null,"abstract":"The zero temperature coefficient (ZTC) is investigated by the simple model and three-dimensional numerical simulations in the Metal-Oxide-Semiconductor (MOS) Field Effect Transistor (MOSFET) with the ellipsoidal (EM) and conventional rectangular gate geometries (CM), considering the same channel widths (W), gate areas (AG) and bias condition (BC) technology. A simple model is used to study the behavior of the gate voltage at ZTC (VZTC) in the linear and the saturation region. The influence of the temperature mobility degradation on VZTC is analyzed for EM and CM devices. The VZTC changes in the temperature range investigated showed a temperature mobility degradation dependence and the both devices showed the same behavior. The analysis takes into account temperature dependence model parameters such as threshold voltage and mobility. The analytical predictions are in very close agreement with 3D simulations results in spite of the simplification used for the VZTC model as a function of temperature in the linear and the saturation region.","PeriodicalId":282991,"journal":{"name":"2022 36th Symposium on Microelectronics Technology (SBMICRO)","volume":"13 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2022-08-22","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"126108307","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Arllen D. R. Ribeiro, Gustavo V. Araujo, J. Martino, P. Agopian
{"title":"Uniaxially strained silicon influence on Two-stage Operational Transconductance Amplifiers designed with SOI FinFET's","authors":"Arllen D. R. Ribeiro, Gustavo V. Araujo, J. Martino, P. Agopian","doi":"10.1109/SBMICRO55822.2022.9881005","DOIUrl":"https://doi.org/10.1109/SBMICRO55822.2022.9881005","url":null,"abstract":"This paper analyzes the influence of uniaxially strained silicon on two-stage operational transconductance amplifiers (OTA) designed with SOI FinFETs. The OTA is designed with unstrained and strained SOI FinFETs. The circuit design was performed using experimental FinFETs data through LookUp Table (LUT) and Verilog-A model. Two different strategies were evaluated for designing the OTA: the same current bias (Iss) and the same inversion condition (gm/IDS), In both strained designs, the mobility improvement thanks to mechanical stress is responsible for higher voltage gain and gain-bandwidth product. Between the strained designs, the one that consider the same current bias of the unstrained one presents a lower power consumption due to the lower drain current compared to the same inversion condition. In summary, the OTA performance increase when it is designed with strained FinFET's.","PeriodicalId":282991,"journal":{"name":"2022 36th Symposium on Microelectronics Technology (SBMICRO)","volume":"59 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2022-08-22","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"114557556","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
K. Kacha, F. Djeffal, A. Bendjerad, H. Ferhati, A. Benhaya
{"title":"Structural and Electrical Properties of a-Si Schottky Diode based on ZnO Top Layer and Ag Intermidiate Ultrathin-Films","authors":"K. Kacha, F. Djeffal, A. Bendjerad, H. Ferhati, A. Benhaya","doi":"10.1109/SBMICRO55822.2022.9881020","DOIUrl":"https://doi.org/10.1109/SBMICRO55822.2022.9881020","url":null,"abstract":"In this paper, the combination of ZnO top layer and intermediate Ag ultrathin films is proposed to enhance the performance of Amorphous-Silicon (a-Si) Schottky Barrier Diodes (SBDs). The latter was fabricated by means of RF magnetron sputtering technique. Accordingly, ZnO/Ag/ZnO/a-Si/Ag/a-Si embedded thin-films were sputtered at room temperature conditions on glass substrate. The morphological and structural properties of the prepared structure were analyzed by performing XRD and SEM characterizations. Characterizations showed an amorphous-like structure of the prepared samples. The electrical parameters of a-Si SBDs with and without Ag middle layer were extracted from current-voltage measurements. It was revealed that the use of ZnO top layer combined with Ag ultrathin-films leads to enhance the electrical behavior of a-Si SBD, where the device offers low series resistance of $2times 10^{3} Omega$ and high derived current capability, while maintaining low off current. This improvement is attributed to the enhanced resistive behavior due to the presence of Ag thin-films. Therefore, the present investigation can provide new strategies for the elaboration of highly-performance SBDs based on a-Si platform, which are suitable for the emerging optoelectronic applications.","PeriodicalId":282991,"journal":{"name":"2022 36th Symposium on Microelectronics Technology (SBMICRO)","volume":"36 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2022-08-22","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"123527631","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Feria D. J, Aline L. M. Pinto, M. Bertotti, M. Carreño, I. Pereyra
{"title":"Electrochemical electrodes based on Laser Induced Graphene on PECVD a-SiC:H and Polyimide","authors":"Feria D. J, Aline L. M. Pinto, M. Bertotti, M. Carreño, I. Pereyra","doi":"10.1109/SBMICRO55822.2022.9881043","DOIUrl":"https://doi.org/10.1109/SBMICRO55822.2022.9881043","url":null,"abstract":"The formation of graphene with defined patterns is crucial for the fabrication of graphene-based electrochemical devices as well as for different devices in microelectronics. In this work, we report an approach for producing and pattern continuous graphene trails by direct 405 nm laser writing at room temperature and atmospheric pressure on two different materials, hydrogenated amorphous silicon carbide films (a-SiC:H) produced by plasma enhanced chemical vapor deposition (PECVD), and polyimide, aiming their application in electrochemical sensors. The graphene lines produced on these substrates demonstrate high electrical conductivity and can be used directly with conductive contacts in different applications without the need of transferring to other insulating substrates, nor the removal of catalytic metals. Graphene trails of approximately $7,5 text{mm}times 30mumathrm{m}$ were obtained on both materials by moving the substrate with the films in a computer controlled XY table and keeping fixed the laser source. Starting from a scanning speed of 300 and 500 mm/min, established in previous studies, variations were made between the laser-substrate distance, the thickness of the a-SiC:H film and the position of the sample, identifying a great dependence of the graphene quality on these parameters. The obtained graphene trails were characterized by raman spectroscopy and scanning electron microscopy, showing continuity in the trails. Electrical measurements through Au/Ti (200nm/20nm) electrodes showed high conductivity with sheet resistances (Rs) ranging from $897Omega$ to $2 mathrm{k} Omega$ per square in the Silicon carbide samples and $39,7Omega$ on the polyamide ones. Also electrochemical electrodes were fabricated and the first cyclic voltammetry measurements showed very promising results. Being fast, efficient and low-cost this technique opens up great new possibilities for manufacturing both, sensors and microelectronic devices.","PeriodicalId":282991,"journal":{"name":"2022 36th Symposium on Microelectronics Technology (SBMICRO)","volume":"1 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2022-08-22","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"128883103","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}