{"title":"Elaboration of Graded Band-Gap a-SiC Thin-Film Using RF Magnetron Sputtering Technique","authors":"F. Djeffal, A. Bendjerad, A. Benhaya, H. Ferhati","doi":"10.1109/SBMICRO55822.2022.9881037","DOIUrl":"https://doi.org/10.1109/SBMICRO55822.2022.9881037","url":null,"abstract":"In this paper, Graded Band-Gap (GBG) amorphous-silicon Carbide (a-SiC) thin-film was successfully fabricated using RF magnetron technique on glass substrate. Accordingly, a-SiC ultrathin layers were sputtered at dissimilar RF power values. XRD and Spectrophotometry measurements were performed to assess the structural, optical and electronic properties of the prepared a-SiC samples. It was found that all samples exhibit an amorphous state. Besides, characterizations showed that the a-SiC band gap can be tuned by using dissimilar RF power values during the sputtering process. In this context, GBG a-SiC film is elaborated by a sequential sputtering process at various RF power values ranging from 60 W to 120 W. It was revealed that the optical band gap is reduced from 2.54 eV to 1.9 eV for the RF power values of 60 W and 120 W, respectively. This is mainly attributed to the effect of the Si and C content on the electronic behavior of the SiC alloy, where the variation of the RF power can induce significant changes regarding the Si/C ratio of the SiC sample. These significant results suggest the elaboration of GBG a-SiC, which can be highly suitable for various applications including photovoltaic and optoelectronic devices.","PeriodicalId":282991,"journal":{"name":"2022 36th Symposium on Microelectronics Technology (SBMICRO)","volume":"13 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2022-08-22","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"124083562","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Impact of using Octogonal Layout Style in Planar Power MOSFETs","authors":"G. A. da Silva, S. Gimenez","doi":"10.1109/SBMICRO55822.2022.9881042","DOIUrl":"https://doi.org/10.1109/SBMICRO55822.2022.9881042","url":null,"abstract":"Previous studies have already shown that the use of alternative gate shapes for planar and tridimensional MOSFETs are capable of boosting their analog and digital electrical performances and their ionizing radiations robustness. In this scenario, this work has the objective to study the impact of the use of octagonal layout style (OCTO), as the basic cell, to the implementing of the Planar Power MOSFET (PPM). The main results of this paper show that the PPM layouted with OCTO layout styles, as the basic cells, are able to improve the drain saturation current (IDS_sat) about 668%%, in relation to that implemented with conventional rectangular layout style, considering that they present the same gate area and bias conditions. Therefore, this type of layout approach can be considered an alternative layout to improve the electrical performance of PPMs.","PeriodicalId":282991,"journal":{"name":"2022 36th Symposium on Microelectronics Technology (SBMICRO)","volume":"34 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2022-08-22","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"123287578","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
T. Borrely, Tao-Yu Huang, Yu-Chen Yang, R. Goldman, A. Quivy
{"title":"On the importance of atom probe tomography for the development of new nanoscale devices","authors":"T. Borrely, Tao-Yu Huang, Yu-Chen Yang, R. Goldman, A. Quivy","doi":"10.1109/SBMICRO55822.2022.9881039","DOIUrl":"https://doi.org/10.1109/SBMICRO55822.2022.9881039","url":null,"abstract":"Atom probe tomography is the only technique capable of measuring with sub-nanometer resolution three-dimensional spatial distributions of all chemical elements with no restrictions of mass or atomic number. The technique has been playing an important role in the development of all sorts of semiconductor devices. However, it is still somewhat little-known outside of the most developed parts of the world. Bearing this in mind, this work aims to present and discuss the atom probe tomography technique and, more importantly, its impact on the development of nanoscale devices to the Brazilian Microelectronics Society. First, we introduce the working principles and experimental procedures of atom probe tomography. Next, we present a few real examples of applications of the technique to device development. Lastly, we briefly discuss the possibility of an application that has not been done yet, namely the atom probe tomography of submonolayer quantum dots.","PeriodicalId":282991,"journal":{"name":"2022 36th Symposium on Microelectronics Technology (SBMICRO)","volume":"40 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2022-08-22","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"128569069","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Standard MOS Diodes Composed by SOI UTBB Transistors","authors":"F. Costa, R. Trevisoli, C. E. Capovilla, R. Doria","doi":"10.1109/SBMICRO55822.2022.9881028","DOIUrl":"https://doi.org/10.1109/SBMICRO55822.2022.9881028","url":null,"abstract":"The main objective of this work is to present an analysis of the performance of UTBB SOI transistors working as standard diodes, where the implementation of ground planes and substrate bias are analyzed. It is shown a reduced leakage current and increased ratio between the on and off-state currents with the substrate bias at −2 V and with a P-type GP implemented. However, both conditions result in increased threshold voltage.","PeriodicalId":282991,"journal":{"name":"2022 36th Symposium on Microelectronics Technology (SBMICRO)","volume":"14 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2022-08-22","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"128416082","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Filipe de Oliveira Pereira Delboni, D. K. Kumada, Marco Isaías Alayo Chávez, Luciana Reyes Pires Kassab
{"title":"Pedestal architecture to manufacture TeO2-ZnO waveguides for the development of photonic devices to operate in the infrared region","authors":"Filipe de Oliveira Pereira Delboni, D. K. Kumada, Marco Isaías Alayo Chávez, Luciana Reyes Pires Kassab","doi":"10.1109/SBMICRO55822.2022.9880965","DOIUrl":"https://doi.org/10.1109/SBMICRO55822.2022.9880965","url":null,"abstract":"The present work shows the feasibility of using the pedestal platform for the fabrication of TeO2-ZnO waveguides and demonstrates the possibility of producing passive optical devices aiming the fabrication of optical amplifiers in the future for photonic applications in the infrared region. The pedestal structure is obtained by conventional photolithography and plasma etching and does not use metallic hard-masks that normally introduce roughness, leading to light scattering. This procedure, successfully used for GeO2-PbO waveguides, benefits light guiding, as it reduces the propagation losses. Results of the procedure used for the TeO2-ZnO pedestal waveguide fabrication are presented as well as propagation losses using the top view technique, at 632 and 980 nm. Scanning Electron Microscopy (SEM) was employed for the waveguides structure inspection. Near field mode profile results are also shown at 980 nm for waveguides width in the range of $4-80 mu mathrm{m}$ and are compared with those obtained by numerical simulations. The fabrication process presented in this work opens possibilities for optical amplifiers fabrication with low propagation losses. Furthermore, this pedestal platform can be extended to different materials as well as other waveguide-based devices.","PeriodicalId":282991,"journal":{"name":"2022 36th Symposium on Microelectronics Technology (SBMICRO)","volume":"81 2 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2022-08-22","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"129944351","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Lucas Mota Barbosa da Silva, M. Pavanello, M. Cassé, S. Barraud, M. Vinet, O. Faynot, M. de Souza
{"title":"Analysis of Variability in Transconductance and Mobility of Nanowire Transistors","authors":"Lucas Mota Barbosa da Silva, M. Pavanello, M. Cassé, S. Barraud, M. Vinet, O. Faynot, M. de Souza","doi":"10.1109/SBMICRO55822.2022.9881023","DOIUrl":"https://doi.org/10.1109/SBMICRO55822.2022.9881023","url":null,"abstract":"This work presents a comparison between the variability in junctionless nanowire transistors and inversion-mode nanowire transistors, looking at the transconductance, low-field mobility, linear and quadratic mobility degradation coefficients. To extract these parameters, the Y-Function method has been used. The obtained results shows differences in mobility and transconductance matching coefficients, indicating that mobility influence is not the only source of transconductance variation.","PeriodicalId":282991,"journal":{"name":"2022 36th Symposium on Microelectronics Technology (SBMICRO)","volume":"34 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2022-08-22","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"132135907","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Rodrigo do Nascimento Tolêdo, J. Martino, P. G. Der Agopian
{"title":"Nanowire TFET with different Source Compositions applied to Low-Dropout Voltage Regulator","authors":"Rodrigo do Nascimento Tolêdo, J. Martino, P. G. Der Agopian","doi":"10.1109/SBMICRO55822.2022.9881035","DOIUrl":"https://doi.org/10.1109/SBMICRO55822.2022.9881035","url":null,"abstract":"This work presents the analysis of vertical nanowire tunnel field-effect transistors (TFETs) and vertical nanowire MOSFET applied to low-dropout voltage regulator (LDO) design. Three TFETs with sources composed by Si, SiGe an Ge are analyzed. The transistor model is based on lookup tables (LUTs) and are implemented in Verilog-A. In all LDO designs, it was defined a gm/ID of 8 V−1 for the differential amplifier transistors, the load current of $1 mumathrm{A}$ and capacitance of 10-pF. A much higher equivalent width was needed for the Si-TFET LDO power transistor which degraded its frequency response, but it consumes an ultra-low quiescent current (300 pA). All TFET based LDOs were stable without the need of a compensator capacitor, while for the MOSFET LDO, a 5-pF capacitor was necessary. The SiGe-TFET LDO presented the higher loop gain (60 dB) which resulted in the best load regulation ($0.25 text{mV}/mumathrm{A}$). The MOSFET LDO presented low efficiency due to high quiescent current, but presented the second-best gain-bandwidth product (GBW) of 52.5 KHz and PSR at low frequency (−49.4 dB). The Ge-TFET LDO presented the best overall results, with the best GBW (70 KHz) and PSR (−52 dB at low frequencies) dissipating only 42.9 nA.","PeriodicalId":282991,"journal":{"name":"2022 36th Symposium on Microelectronics Technology (SBMICRO)","volume":"125 25 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2022-08-22","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"127673251","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Development of the prism-coupler model for the design of a biosensor based on SPR technology for fast diagnostics","authors":"A. Mazzeo, G. Canal, M. I. Alayo","doi":"10.1109/SBMICRO55822.2022.9881033","DOIUrl":"https://doi.org/10.1109/SBMICRO55822.2022.9881033","url":null,"abstract":"Biosensors are considered the tools of the future in medicine. With the pandemic caused by the new corona-virus (SARS-COV-2), the development of biosensors with fast diagnostics has become a public health need. Optical biosensors, in particular, have gained strength in the market due to their high sensitivity and detection capability. In this category, sensors based on surface plasmon resonance technology have gained prominence. In this work, a prism-coupler set using the Ktreschamnn configuration was designed and built. The prism-coupler smodel consists of an automated optical-mechanical system and a triangular prism. Thin films of 50 nm of gold and 5 nm of titanium were deposited on glass slices and coupled to a commercial prism (refractive index 1.50). The movement of the optical-mechanical system and the data acquisition are carried out by 2 microcontrollers that are configured using a Labview software. A simulation program using MatLab software was also developed in this work to determine the SPR curves at different refractive index solutions. At first, measurement in air was carried out obtaining a resonance angle in 35°. Afterwards, sucrose solutions were measured using our system at concentrations of 10, 20, 30, 40 and 50%. Finally, experimental and simulated results were compared and analyzed in this work.","PeriodicalId":282991,"journal":{"name":"2022 36th Symposium on Microelectronics Technology (SBMICRO)","volume":"38 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2022-08-22","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"123489395","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}