2008 IEEE MTT-S International Microwave Symposium Digest最新文献

筛选
英文 中文
A self-steering array using power detection and phase shifting 采用功率检测和相移的自转向阵列
2008 IEEE MTT-S International Microwave Symposium Digest Pub Date : 2008-06-15 DOI: 10.1109/MWSYM.2008.4633307
J. M. Akagi, Alexis Zamora, Monte K. Watanabe, W. Shiroma
{"title":"A self-steering array using power detection and phase shifting","authors":"J. M. Akagi, Alexis Zamora, Monte K. Watanabe, W. Shiroma","doi":"10.1109/MWSYM.2008.4633307","DOIUrl":"https://doi.org/10.1109/MWSYM.2008.4633307","url":null,"abstract":"A half-duplex self-steering array using power detection and phase shifting is presented. The system combines a phase-shifting array and an RF power-tracking control circuit to autonomously steer its beam toward the peak-power direction. Retrodirectivity is reported for angles of 0Ð, −15Ð, −30Ð, and +45Ð at a transmitting frequency of 6.5 GHz.","PeriodicalId":273767,"journal":{"name":"2008 IEEE MTT-S International Microwave Symposium Digest","volume":"3 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2008-06-15","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"122114383","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 13
A robust approach for comparison and validation of large signal measurement systems 一种比较和验证大信号测量系统的鲁棒方法
2008 IEEE MTT-S International Microwave Symposium Digest Pub Date : 2008-06-15 DOI: 10.1109/MWSYM.2008.4633152
T. Williams, O. Mojón, S. Woodington, J. Lees, M. Barciela, J. Benedikt, P. Tasker
{"title":"A robust approach for comparison and validation of large signal measurement systems","authors":"T. Williams, O. Mojón, S. Woodington, J. Lees, M. Barciela, J. Benedikt, P. Tasker","doi":"10.1109/MWSYM.2008.4633152","DOIUrl":"https://doi.org/10.1109/MWSYM.2008.4633152","url":null,"abstract":"As time-domain RF measurement tools gain recognition and acceptance, it becomes increasingly important to identify and compare the different systems being used, and to quantify any differences observed. In this paper, a robust validation approach is identified and used to compare a number of completely different large-signal measurement systems. Unlike a previous ‘round-robin’ exercise, the solution does not require an accurately modeled non-linear reference component to account for system impedance variations when comparing results, which clearly introduces additional complexity and the possibility of errors. Instead, active loadpull, coupled with a common passive source network is used to present a consistent impedance environment to a device under test. After employing this method, large signal data from two completely different measurement architectures employing different instruments and calibration procedures showed excellent agreement. This approach has proved useful in the validation and comparison of a number of large signal measurement and could be used to increase confidence in such systems.","PeriodicalId":273767,"journal":{"name":"2008 IEEE MTT-S International Microwave Symposium Digest","volume":"68 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2008-06-15","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"129392350","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 11
Phase modulated fiber-optic link with high dynamic range 高动态范围的相位调制光纤链路
2008 IEEE MTT-S International Microwave Symposium Digest Pub Date : 2008-06-15 DOI: 10.1109/MWSYM.2008.4633054
Yifei Li, P. Herczfeld, A. Rosen
{"title":"Phase modulated fiber-optic link with high dynamic range","authors":"Yifei Li, P. Herczfeld, A. Rosen","doi":"10.1109/MWSYM.2008.4633054","DOIUrl":"https://doi.org/10.1109/MWSYM.2008.4633054","url":null,"abstract":"In this paper we present results of a coherent fiber-optic, phase modulated link using a photonic phase locked loop phase demodulator. The focus is obtaining high spurious free dynamic range (SFDR). We demonstrated experimentally an SFDR of 135 dB•Hz2/3. In addition, an optimized PM link design with a target SFDR of 147 dB•Hz2/3 was also addressed.","PeriodicalId":273767,"journal":{"name":"2008 IEEE MTT-S International Microwave Symposium Digest","volume":"54 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2008-06-15","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"129471949","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 1
New concepts for dielectric multi-mode resonators with branches 带分支介质多模谐振器的新概念
2008 IEEE MTT-S International Microwave Symposium Digest Pub Date : 2008-06-15 DOI: 10.1109/MWSYM.2008.4632935
M. Hoft
{"title":"New concepts for dielectric multi-mode resonators with branches","authors":"M. Hoft","doi":"10.1109/MWSYM.2008.4632935","DOIUrl":"https://doi.org/10.1109/MWSYM.2008.4632935","url":null,"abstract":"In this paper new concepts for multi-mode resonators are presented, which are based on TM-mode operation in dielectric rods. By proper arrangement of dielectric rods in branch configuration, new fundamental eigenmode resonances could be shown to be present. In the simplest case, dual-mode operation could be achieved by an Y-shape arrangement. Higher number of fundamental modes could be obtained by adding further branches to the novel mono-block ceramic, which is suitable for planar fabrication. Furthermore, non-planar constructions are advantageously possible as shown exemplarily at a manufactured filter prototype.","PeriodicalId":273767,"journal":{"name":"2008 IEEE MTT-S International Microwave Symposium Digest","volume":"1 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2008-06-15","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"129375909","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 9
Miniaturized reconfigurable filter using PIN diode for UWB applications 微型可重构滤波器,使用PIN二极管用于超宽带应用
2008 IEEE MTT-S International Microwave Symposium Digest Pub Date : 2008-06-15 DOI: 10.1109/MWSYM.2008.4633011
M. Karim, Yong-Xin Guo, Z. N. Chen, L. Ong
{"title":"Miniaturized reconfigurable filter using PIN diode for UWB applications","authors":"M. Karim, Yong-Xin Guo, Z. N. Chen, L. Ong","doi":"10.1109/MWSYM.2008.4633011","DOIUrl":"https://doi.org/10.1109/MWSYM.2008.4633011","url":null,"abstract":"This paper reports a new compact design of UWB reconfigurable filter which switches from bandstop to bandpass filter using pin-diode. First, a unit cell is developed which consist of two bended open stubs of quarter-wavelength and a connecting stub of half-wavelength. Two unit cells are cascaded by inductive stub to form a bandstop filter. Avago’s RF pin diode is used to switch the filter from bandstop to bandpass filter at the same resonant frequency. The equivalent circuit model and its parameters are extracted. The measurement results for bandstop filter shows a rejection bandwidth is 5.2 GHz and the insertion loss in the passband is 0.6 dB. For the bandpass filter, the insertion loss is 2.1 dB and 3-dB bandwidth is from 3.6 GHz to 10.5 GHz. The area of novel unit cell filter is ( λg/4)2 at the centre frequency of the bandstop, while the area of the filter realized using the non bending stubs and connecting lines is 2( λg/4)2 for the same bandstop characteristics.","PeriodicalId":273767,"journal":{"name":"2008 IEEE MTT-S International Microwave Symposium Digest","volume":"59 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2008-06-15","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"131087531","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 21
Strontium titanate DC electric field switchable and tunable bulk acoustic wave solidly mounted resonator 钛酸锶直流电场可调体声波固体谐振器
2008 IEEE MTT-S International Microwave Symposium Digest Pub Date : 2008-06-15 DOI: 10.1109/MWSYM.2008.4633289
G. Saddik, D. Boesch, S. Stemmer, R. York
{"title":"Strontium titanate DC electric field switchable and tunable bulk acoustic wave solidly mounted resonator","authors":"G. Saddik, D. Boesch, S. Stemmer, R. York","doi":"10.1109/MWSYM.2008.4633289","DOIUrl":"https://doi.org/10.1109/MWSYM.2008.4633289","url":null,"abstract":"A voltage switchable/tunable strontium titanate solidly mounted BAW resonator was implemented using an acoustical Bragg reflector of alternating high and low acoustic impedance layers. In the absence of any bias the device is merely capacitive, but under a DC bias the material becomes piezoelectrically active, leading to a BAW resonance that is effectively turned on and off by the applied field. In the resonant state a voltage-dependent frequency trimming of 1 % is observed, from 7.05 GHz to 6.98 GHz with an applied bias of 0–9 V, respectively. The quality factor at the resonant frequency was approximately 100, limited by the simplicity of the device design. The Q was relatively constant with applied bias, with an effective electromechanical coupling coefficient that varied linearly with applied bias up to a maximum of 3.3 %.","PeriodicalId":273767,"journal":{"name":"2008 IEEE MTT-S International Microwave Symposium Digest","volume":"1 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2008-06-15","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"130660101","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 30
An extrinsic component parameter extraction method for high power RF LDMOS transistors 大功率射频LDMOS晶体管的外在成分参数提取方法
2008 IEEE MTT-S International Microwave Symposium Digest Pub Date : 2008-06-15 DOI: 10.1109/MWSYM.2008.4633239
J. Wood, D. Lamey, M. Guyonnet, D. Chan, D. Bridges, N. Monsauret, P. Aaen
{"title":"An extrinsic component parameter extraction method for high power RF LDMOS transistors","authors":"J. Wood, D. Lamey, M. Guyonnet, D. Chan, D. Bridges, N. Monsauret, P. Aaen","doi":"10.1109/MWSYM.2008.4633239","DOIUrl":"https://doi.org/10.1109/MWSYM.2008.4633239","url":null,"abstract":"A new extrinsic network and extrinsic parameter extraction methodology is developed for high power RF LDMOS transistor modeling. This new method uses accurate manifold de-embedding using electromagnetic simulation, and optimization of the extrinsic network parameter values over a broad frequency range. The new extrinsic network accommodates feedback effects which are observed in high power transistors. This improved methodology allows us to achieve a good agreement between measured and modeled S-parameters in the frequency range of 0.5 to 6 GHz for different bias conditions. Large-signal verification of this new model shows a very good match with measurements at 2.14 GHz.","PeriodicalId":273767,"journal":{"name":"2008 IEEE MTT-S International Microwave Symposium Digest","volume":"30 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2008-06-15","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"132099340","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 14
Evaluation of electrical properties for complex mixtures with a low-frequency periodic technique 用低频周期技术评价复杂混合物的电性能
2008 IEEE MTT-S International Microwave Symposium Digest Pub Date : 2008-06-15 DOI: 10.1109/MWSYM.2008.4633027
Hsu-Hsiang Wu, Dagang Wu, Ji Chen, Richard Liu
{"title":"Evaluation of electrical properties for complex mixtures with a low-frequency periodic technique","authors":"Hsu-Hsiang Wu, Dagang Wu, Ji Chen, Richard Liu","doi":"10.1109/MWSYM.2008.4633027","DOIUrl":"https://doi.org/10.1109/MWSYM.2008.4633027","url":null,"abstract":"This paper presents an efficient numerical technique in evaluating the homogenized anisotropic electrical properties of mixtures with arbitrary inclusions at low-frequency region. The method is based on a low-frequency finite-different method in conjuncture with periodic boundary conditions. Using the developed method, the relationship between micro-scale inclusions and macro-level mixture electrical properties are explored. It is observed that in addition to inclusion volume, inclusion shape and spacing among inclusion objects can also significantly change the homogenized mixture electrical properties.","PeriodicalId":273767,"journal":{"name":"2008 IEEE MTT-S International Microwave Symposium Digest","volume":"27 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2008-06-15","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"130833831","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 9
Dual-band Y-junction power dividers implemented through artificial lines based on complementary resonators 通过基于互补谐振器的人工线路实现的双频y结功率分配器
2008 IEEE MTT-S International Microwave Symposium Digest Pub Date : 2008-06-15 DOI: 10.1109/MWSYM.2008.4632919
G. Sisó, J. Bonache, F. Martín
{"title":"Dual-band Y-junction power dividers implemented through artificial lines based on complementary resonators","authors":"G. Sisó, J. Bonache, F. Martín","doi":"10.1109/MWSYM.2008.4632919","DOIUrl":"https://doi.org/10.1109/MWSYM.2008.4632919","url":null,"abstract":"In this work, dual-band Y-junction power dividers based on impedance inverters with composite right/left handed (CRLH) characteristics are presented for the first time. The inverters are either implemented through complementary split ring resonators (CSRRs) or through complementary spiral resonators (CSRs). By using the left handed and right handed frequency bands of the inverters, the required phase shifts, −90° and +90°, at the respective operating frequencies, ƒ<inf>1</inf> and ƒ<inf>2</inf>, can be obtained, whereas the characteristic impedance can be set to the necessary value to achieve effective input matching (Z<inf>o</inf>=35.35Ω for a 1:2 power splitter). The main advantages of these devices are: (i) dual-band operation with arbitrary ƒ<inf>2</inf>/ƒ<inf>1</inf> ratio, due to the possibility of engineering the dispersion diagram of the impedance inverter; (ii) compact size, owing to the small electrical size of CSRRs or CSRs; and (iii) full compatibility with planar technology, since neither lumped elements nor vias are used. The reported examples are two dual-band Y-junction power dividers operative at the mobile GSM bands (ƒ<inf>1</inf>=0.9GHz, ƒ<inf>2</inf>=1.8GHz). The area occupied by the CSR- and CSRR-based divider is 0.11λ×0.09λ and 0.14λ×0.12λ, respectively (where λ is the guided wavelength at ƒ<inf>1</inf>) and their measured characteristics are good.","PeriodicalId":273767,"journal":{"name":"2008 IEEE MTT-S International Microwave Symposium Digest","volume":"10 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2008-06-15","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"130946889","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 24
Low profile LTCC balanced filter based on a lumped elements balun for WiMAX applications 基于集总元件平衡的低轮廓LTCC平衡滤波器,适用于WiMAX应用
2008 IEEE MTT-S International Microwave Symposium Digest Pub Date : 2008-06-15 DOI: 10.1109/MWSYM.2008.4633251
S. Sakhnenko, D. Orlenko, Kostyantyn Markov, A. Yatsenko, B. Vorotnikov, G. Sevskiy, P. Heide, M. Vossiek
{"title":"Low profile LTCC balanced filter based on a lumped elements balun for WiMAX applications","authors":"S. Sakhnenko, D. Orlenko, Kostyantyn Markov, A. Yatsenko, B. Vorotnikov, G. Sevskiy, P. Heide, M. Vossiek","doi":"10.1109/MWSYM.2008.4633251","DOIUrl":"https://doi.org/10.1109/MWSYM.2008.4633251","url":null,"abstract":"This paper reports on a design of a balanced filter based on a new lumped LC type balun. The realization disadvantages of conventional LC baluns integrated in a front-end module have been discussed and a new low profile lumped-element balun has been proposed. The balanced filter is realized as a combination of a second order band pass filter and the novel LC balun with an additional low-pass circuit. The proposed layout has been realized using multilayer low temperature co-fired ceramic (LTCC) technology. The resulting structure exhibits excellent electrical performance, immunity to manufacturing tolerances and compactness. The realized low profile balanced filter is placed between two ground planes ensuring high electromagnetic compatibility which allows using this balanced filter as a building block of highly integrated WiMAX front-end modules.","PeriodicalId":273767,"journal":{"name":"2008 IEEE MTT-S International Microwave Symposium Digest","volume":"23 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2008-06-15","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"125570547","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 18
0
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
确定
请完成安全验证×
相关产品
×
本文献相关产品
联系我们:info@booksci.cn Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。 Copyright © 2023 布克学术 All rights reserved.
京ICP备2023020795号-1
ghs 京公网安备 11010802042870号
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术官方微信