Takuto Nomura, Masaru Takeuchi, A. Ichikawa, Eunhye Kim, T. Fukuda
{"title":"Development of modular bio-actuators used Artificial tendon structure","authors":"Takuto Nomura, Masaru Takeuchi, A. Ichikawa, Eunhye Kim, T. Fukuda","doi":"10.1109/mhs48134.2019.9249265","DOIUrl":"https://doi.org/10.1109/mhs48134.2019.9249265","url":null,"abstract":"In this research, we fabricated tendon structures on a cultured muscle to use it as individual mechanical actuator. Our tendon structure and culture template could cultivate muscle for more than 2 weeks. Cultured muscles made using our device contracted more than 200 µ m in response to electrical pulses. Muscle cells need a scaffold when culturing. And it is necessary for the muscle during culturing to be firmly fixed. Therefore, many bio robots cultivate muscles on the surface of robot. With this, the shape of the robot is largely limited. We think that cultured muscles that can be freely removed are necessary for free development of bio robots. In this study, we fabricated tendon structures on a cultured muscle to use it as individual mechanical actuator. The cultured muscles were prepared by mixing mouse muscle cells C2C12 with Matrigel. The cultured muscles and tendon structures were connected each other like a chain by inserting both ends of culture muscle into the hole of tendon structures. The cultured muscles connected with tendon structure were became multinucleated. And we gave the cultured muscle a square wave electrical pulse stimulation. As a result, the amount of contraction of cultured muscle was more 200 µ m. Also, the prepared cultured muscle with tendon structure could be removed from the culture dish and connected to the experimental bio robot skeleton. By modularizing cultured muscles, it is possible to manufacture bio-actuators and manufacture robots in separate processes. Manufacturing bioactuators and robots in separate processes may improve the freedom of designing bio robots.","PeriodicalId":264161,"journal":{"name":"2019 International Symposium on Micro-NanoMechatronics and Human Science (MHS)","volume":"13 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2019-12-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"124449172","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Shoki Yamada, T. Aoyama, Sarau Takeno, Masaru Takeuchi, Y. Hasegawa
{"title":"Three-dimensional View-expansive Microscope Based on Focal Point Adjustment and Viewpoint Movement","authors":"Shoki Yamada, T. Aoyama, Sarau Takeno, Masaru Takeuchi, Y. Hasegawa","doi":"10.1109/MHS48134.2019.9249300","DOIUrl":"https://doi.org/10.1109/MHS48134.2019.9249300","url":null,"abstract":"This paper develops a three-dimensional view-expansive microscope that not only expands the two-dimensional field of observation but also expands the depth of focus. The photographable area of the developed system is approximately 111 times larger than the corresponding area available in a normal microscope. The effectiveness of the developed system is evaluated via view-expansive video shooting experiments of micro beads on a slide grass.","PeriodicalId":264161,"journal":{"name":"2019 International Symposium on Micro-NanoMechatronics and Human Science (MHS)","volume":"207 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2019-12-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"121530708","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
T. Shibata, Moeto Nagai, T. Kawahara, Motoki Furukawa, A. Belal, H. Ohtsuka, I. Ishii
{"title":"MHS2019","authors":"T. Shibata, Moeto Nagai, T. Kawahara, Motoki Furukawa, A. Belal, H. Ohtsuka, I. Ishii","doi":"10.1109/MHS48134.2019.9249367","DOIUrl":"https://doi.org/10.1109/MHS48134.2019.9249367","url":null,"abstract":"MHS2019","PeriodicalId":264161,"journal":{"name":"2019 International Symposium on Micro-NanoMechatronics and Human Science (MHS)","volume":"40 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2019-12-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"134507052","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Real Time, Flexible RF Sputtered ZnO Nano-film CO2 Sensor for Capnographic Applications","authors":"Anuroop Shrivastava, G. Mani, K. Tsuchiya","doi":"10.1109/MHS48134.2019.9249267","DOIUrl":"https://doi.org/10.1109/MHS48134.2019.9249267","url":null,"abstract":"In this research we aim to develop a real time, flexible, nano-film CO2sensor that can be fixed inside a mask for the purpose of capnography. Capnography is monitoring of the concentration or partial pressure of carbon dioxide in the respiratory gases. Its main development has been as a monitoring tool for use during anesthesia, intensive care, pulmonary perfusion, alveolar ventilation, respiratory patterns. The shape of curve is affected by some forms of lung diseases; in general, there are obstructive conditions such as bronchitis, emphysema and asthma in which the mixing of gases within the lung is affected. Currently, capnography is done using a capnography that utilizes a set of infrared trans mitter and receiver attached to a mask, which is a bit bulky setup. But in case of our sensor, we deposit interdigitated Au/Ti electrodes on a free standing nanosheet that acts as our substrate, then further depositing ZnO sensing layer on top of interdigitated part of electrodes. Measurements can be carried out by measuring the resistance between two terminals of electrodes. Due to adsorption of CO2on the sensing layer, the resistance between the electrodes will be changes resulting in a graph, which will show the curve in proportion to conc. of the CO2in air. This sensor is only 10mm X 10mm in area and few hundred nanometers thick, resulting in a sensor of almost negligible volume and weight that can be easily attached inside a mask. Sensor has a very simple fabrication and multiple pieces can be bulk fabricated at the same time under same conditions, making it very cheap and fit for commercial use. This sensor can also detect presence of few more harmful gases and vapors like acetone, ethanol and methane. So, further we have plans to make is more selective towards CO2by coating it with partially permeable membrane or by addition of some impurity.","PeriodicalId":264161,"journal":{"name":"2019 International Symposium on Micro-NanoMechatronics and Human Science (MHS)","volume":"48 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2019-12-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"115773440","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"DESIGN AND EVALUATION OF MICROMIXIER WITH LOW DEAD VOLUME BASED ON VIBRATION-INDUCED FLOW","authors":"T. Matsui, Hiroaki Suzuki, T. Hayakawa","doi":"10.1109/MHS48134.2019.9249335","DOIUrl":"https://doi.org/10.1109/MHS48134.2019.9249335","url":null,"abstract":"On-chip mixing is important technology. In this paper, we propose micromixier based on vibration-induced flow with low dead volume. We show the proof of concept and quantitatively evaluated mixing performance of proposed mixing method.","PeriodicalId":264161,"journal":{"name":"2019 International Symposium on Micro-NanoMechatronics and Human Science (MHS)","volume":"108 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2019-12-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"115174039","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Stability Analysis of Self-Folding Sheets on Water Surface","authors":"M. Yamada, Hiroki Shigemune, H. Sawada","doi":"10.1109/MHS48134.2019.9249253","DOIUrl":"https://doi.org/10.1109/MHS48134.2019.9249253","url":null,"abstract":"We analyze the stability of 3D structures composed of heat-shrinkable polymer sheets and thin plastic sheets floating on water surface. Sheet materials have the advantages of the lightness and the ease of deformation. Because of these advantages, the sheet materials are used in robotic parts that float on water surface by the surface tension such as a camphor ship. We propose a new method to realize self-folding sheet materials on water surface using the heat-shrinkage of polymer sheets. The use of heat-shrinkable sheets for self-folding on water surface is difficult for the specific heat of water, and we adopt a 2D sheet structure for self-folding. Our method enables the remotely-operated deformation from the 2D structures to the 3D structures on water surface. The deformable 3D structures are able to adapt to different water surface conditions. In this study, self-folding speed is compared using heat-shrinkable polymer sheets drawn in two colors. Two types of 3D structures are prepared by considering the difference in self-folding speed depending on the color. We finally evaluated the stability on water surface of the two different 3D structures.","PeriodicalId":264161,"journal":{"name":"2019 International Symposium on Micro-NanoMechatronics and Human Science (MHS)","volume":"17 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2019-12-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"115078098","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
K. Tadakuma, Tomoya Takayashi, Natsumi Hookabe, M. Watanabe, Yuuki Ozawa, Tori Shimizu, Eri Takane, H. Kajihara, Takeshi Yamazaki, M. Konyo, S. Tadokoro
{"title":"Nemertea Proboscis Inspired Extendable Mechanism","authors":"K. Tadakuma, Tomoya Takayashi, Natsumi Hookabe, M. Watanabe, Yuuki Ozawa, Tori Shimizu, Eri Takane, H. Kajihara, Takeshi Yamazaki, M. Konyo, S. Tadokoro","doi":"10.1109/MHS48134.2019.9249086","DOIUrl":"https://doi.org/10.1109/MHS48134.2019.9249086","url":null,"abstract":"In this research, we aim to establish a design theory and implementation method for an inflatable robot mechanism that can branch and divide freely based on the core technology that a robot freely shapes its structure with a shape memory function. As a first step of our investigation, we present an initial prototype model of branched torus mechanism using inflatable structure inspired by the nemertea proboscis We developed the basic prototype mechanical model of this proboscis structure and did some experiments to understand the basic performance of this configuration. As explained above, we confirmed the basic performances of the first prototype mechanical models based on nemertea proboscis and this mechanical configuration can be used for the expandable gripper, the branched stent graft, the distributer of the tiny mobile robots into the real fields.","PeriodicalId":264161,"journal":{"name":"2019 International Symposium on Micro-NanoMechatronics and Human Science (MHS)","volume":"4 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2019-12-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"120954218","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Fusion system of vision and hearing sensation using Deep Learning Fusion system of vision and hearing sensation using Deep Learning","authors":"Kazuto Tsumura, F. Kobayashi, Hiroyuki Nakamoto","doi":"10.1109/MHS48134.2019.9249255","DOIUrl":"https://doi.org/10.1109/MHS48134.2019.9249255","url":null,"abstract":"Recently, sensing technology has been dramatically developed. Along with this, a wide variety of sensors have been used in a single system such as automated driving technology and the robot industry. However, as the number of sensors in a system increases, a fusion method for information obtained from the sensors becomes a problem. When humans recognize information from environment, the information obtained from the five senses is once transmitted and processed in sensory areas such as the visual and auditory areas of the brain. After that, the information processed in the sensory area is transmitted to the association area, and information fusion is performed. Also in robot's sensor fusion system, development of such human sensor fusion system is expected. In this paper, we propose a method to extract feature value using deep learning for each sensor and fusion the feature value. In this system, a system constructed by combining lipreading and speech recognition using visual and auditory information. We aim to realize sensor fusion by extracting feature value and recognizing words using Convolutional Neural Network (CNN) respectively for visual and auditory information and inputting the recognition results to the Neural Network that fusion the recognition results. Recently, sensing technology has been dramatically developed. Along with this, a wide variety of sensors have been used in a single system such as automated driving technology and the robot industry. However, as the number of sensors in a system increases, a fusion method for information obtained from the sensors becomes a problem. When humans recognize information from environment, the information obtained from the five senses is once transmitted and processed in sensory areas such as the visual and auditory areas of the brain. After that, the information processed in the sensory area is transmitted to the association area, and information fusion is performed. Also in robot's sensor fusion system, development of such human sensor fusion system is expected. In this paper, we propose a method to extract feature value using deep learning for each sensor and fusion the feature value. In this system, a system constructed by combining lipreading and speech recognition using visual and auditory information. We aim to realize sensor fusion by extracting feature value and recognizing words using Convolutional Neural Network (CNN) respectively for visual and auditory information and inputting the recognition results to the Neural Network that fusion the recognition results.","PeriodicalId":264161,"journal":{"name":"2019 International Symposium on Micro-NanoMechatronics and Human Science (MHS)","volume":"57 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2019-12-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"121812853","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Effects of Mechanical Properties and Morphologies of Collagen Hydrogels on Tissue Hierarchical Structures of 3D Engineered Muscle Tissues","authors":"K. Furusawa","doi":"10.1109/MHS48134.2019.9249284","DOIUrl":"https://doi.org/10.1109/MHS48134.2019.9249284","url":null,"abstract":"We have investigated an effect of elastic modulus on morphology of engineered muscle tissues. The engineered muscle tissues were constructed by culturing C2C12 cells in collagen hydrogels with multichannel structures (Multi-Channel Collagen Gels: MCCGs). To test the effect of elastic modulus of MCCGs on the tissue morphology, we modified the elastic modulus of MCCG by crosslinking with genipin. By comparing cellular morphology of C2C12 cells in MCCGs, we have shown that MCCG with genipin crosslinking supports cell adhesion and anisotropic elongation of C2C12 cells seeded in MCCG. The results suggests that a mechanical modification of MCCG is required for effectively culturing myoblasts and constructing functional engineered muscle tissues by using MCCG.","PeriodicalId":264161,"journal":{"name":"2019 International Symposium on Micro-NanoMechatronics and Human Science (MHS)","volume":"1 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2019-12-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"130277836","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Strength changes due to the immersion for poly(lactic acid) test pieces made by 3D printer","authors":"Asahi Yonezawa, Miho Suzuki, K. Takeda, A. Yamada","doi":"10.1109/MHS48134.2019.9249330","DOIUrl":"https://doi.org/10.1109/MHS48134.2019.9249330","url":null,"abstract":"Poly(lactic acid)(PLA) is a biodegradable thermoplastic resin used for a medical instrument because the material does not require removal after operation. Injection molding methods have been used for the processing of PLA. In contrast, processing by a fused filament fabrication (FFF) 3D printer has attracted attention in recent years. One of the important parameter for FFF 3D printer is scan pattern of the nozzle. The strength of the structure depends on the scan pattern of the nozzle. The strength characteristics associated with decomposition is considered to depend on the scan pattern of the nozzle. In this study, we fabricated bending and tensile test pieces by the FFF 3D printer, and compared the strength change due to the immersion whereas formed by the different scan patterns of the nozzle. The maximum bending stresses were increased for the test pieces immersed in saline. This tendency was remarkable in the test pieces of unidirectional scan patterns. In contrast, the maximum tensile stresses were decreased for the test pieces immersed in saline. The obtained results can be applied to the strength design of PLA structures made by the FFF 3D printer.","PeriodicalId":264161,"journal":{"name":"2019 International Symposium on Micro-NanoMechatronics and Human Science (MHS)","volume":"1 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2019-12-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"128289201","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}