Volume 1: Offshore Technology; Offshore Geotechnics最新文献_第9页

An Enhanced Interface Model for Friction Fatigue Problems of Axially Loaded Piles 轴向桩摩擦疲劳问题的增强界面模型

Volume 1: Offshore Technology; Offshore Geotechnics Pub Date : 2019-06-09 DOI: 10.1115/OMAE2019-96078

B. Kullolli, M. Baessler, P. Cuéllar, S. Rica, F. Rackwitz

{"title":"An Enhanced Interface Model for Friction Fatigue Problems of Axially Loaded Piles","authors":"B. Kullolli, M. Baessler, P. Cuéllar, S. Rica, F. Rackwitz","doi":"10.1115/OMAE2019-96078","DOIUrl":"https://doi.org/10.1115/OMAE2019-96078","url":null,"abstract":"\u0000 The shaft bearing capacity often plays a dominant role for the overall structural behaviour of axially loaded piles in offshore deep foundations. Under cyclic loading, a narrow zone of soil at the pile-soil interface is subject to cyclic shearing solicitations. Thereby, the soil may densify and lead to a decrease of confining stress around the pile due to micro-phenomena such as particle crushing, migration and rearrangement. This reduction of radial stress has a direct impact on the shaft capacity, potentially leading in extreme cases to pile failure.\u0000 An adequate interface model is needed in order to model this behaviour numerically. Different authors have proposed models that take typical interface phenomena in account such as densification, grain breakage, normal pressure effect and roughness.\u0000 However, as the models become more complex, a great number of material parameters need to be defined and calibrated. This paper proposes the adoption and transformation of an existing soil bulk model (Pastor-Zienkiewicz) into an interface model. To calibrate the new interface model, the results of an experimental campaign with the ring shear device under cyclic loading conditions are here presented. The constitutive model shows a good capability to reproduce typical features of sand behaviour such as cyclic compaction and dilatancy, which in saturated partially-drained conditions may lead to liquefaction and cyclic mobility phenomena.","PeriodicalId":23567,"journal":{"name":"Volume 1: Offshore Technology; Offshore Geotechnics","volume":null,"pages":null},"PeriodicalIF":0.0,"publicationDate":"2019-06-09","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"82149135","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

引用次数: 0

Vortex-Induced-Vibration of Jack-Ups With Cylindrical Legs in Regular Waves 柱腿自升式自升式平台在规则波中的涡激振动

Volume 1: Offshore Technology; Offshore Geotechnics Pub Date : 2019-06-09 DOI: 10.1115/omae2019-95764

S. Ramadasan, L. Tao, A. Dev

引用次数: 1

Three-Dimensional Dynamic Analysis Method of Multi-Component Mooring Lines 多组分系泊索三维动力分析方法

Volume 1: Offshore Technology; Offshore Geotechnics Pub Date : 2019-01-01 DOI: 10.1115/omae2019-96056

Y. A. Hermawan, Y. Furukawa

{"title":"Three-Dimensional Dynamic Analysis Method of Multi-Component Mooring Lines","authors":"Y. A. Hermawan, Y. Furukawa","doi":"10.1115/omae2019-96056","DOIUrl":"https://doi.org/10.1115/omae2019-96056","url":null,"abstract":"Complicated mooring system well-known as a multi-component mooring line is highly required owing to the deep depth of water and severe sea conditions. Since the dynamic behaviors of such mooring line are quite complex, proper numerical method is indispensable to predict the dynamic behaviors of a multi-component mooring line efficiently and precisely. In this paper, a numerical method improving the lumped mass method is proposed to introduce the three-dimensional dynamic analysis of multi-component mooring line with the motion of an anchor and clump weights. The mooring line is regarded as a multi-component object which has nonuniform segment line characteristics. In this method, lumped mass technique is developed to represent the three-dimensional dynamic behavior of each segment individually, allowing the motion of bottom-end segment as well as the anchor. Then, the motion of the end-segment is regarded as the motion of the upper-end of lower segment. Meanwhile, calculation method of initial condition for dynamic calculation is developed by adopting the basic principle of multi-component mooring line catenary equations. The results of time histories representing the three-dimensional dynamic analysis of mooring line are obtained and compared with other numerical and experimental results presented in published papers. The results show good agreement with both numerical and experimental results.","PeriodicalId":23567,"journal":{"name":"Volume 1: Offshore Technology; Offshore Geotechnics","volume":null,"pages":null},"PeriodicalIF":0.0,"publicationDate":"2019-01-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"82221562","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

引用次数: 0

Fundamental Engineering Characteristics of Cohesive Sediments in the Northern Region of South China Sea 南海北部海域黏性沉积物的基本工程特征

Volume 1: Offshore Technology; Offshore Geotechnics Pub Date : 2018-06-06 DOI: 10.1061/9780784481639.013

Ya Li

{"title":"Fundamental Engineering Characteristics of Cohesive Sediments in the Northern Region of South China Sea","authors":"Ya Li","doi":"10.1061/9780784481639.013","DOIUrl":"https://doi.org/10.1061/9780784481639.013","url":null,"abstract":"\u0000 The northern region of South China Sea is the important strategic region for the offshore oil and gas resources development in China. The main shallow sediment of the region is the cohesive soil with diverse engineering characteristics difficult to be determined. The paper collects the comprehensive geotechnical data obtained from the laboratory test and the in-situ Cone Penetration Test (CPT) for the offshore oil and gas projects in the northern region of South China Sea, and presents the fundamental engineering characteristics of the cohesive soil. Results indicate that the cohesive soil with the low plasticity index and the low clay particle content in shallow water is obviously different from that in deep water in the northern region of South China Sea. The physical properties of the clay soil with the high plasticity index and high clay particle content in the northern deep water region of South China Sea are similar to those found in the Gulf of Mexico and West Africa. Moreover, there are two different deposit modes for the sediment in the northern region of South China Sea, which are the fine-grained and coarse-grained govern deposit modes in deep and shallow water respectively. It is found that the sleeve friction ratio of the cohesive sediment is very low in shallow water. The normalized values of the clay soil in deep water are consistent with those from the Gulf of Mexico and West Africa.","PeriodicalId":23567,"journal":{"name":"Volume 1: Offshore Technology; Offshore Geotechnics","volume":null,"pages":null},"PeriodicalIF":0.0,"publicationDate":"2018-06-06","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"85674202","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

引用次数: 0