Volume 1: Flow Manipulation and Active Control; Bio-Inspired Fluid Mechanics; Boundary Layer and High-Speed Flows; Fluids Engineering Education; Transport Phenomena in Energy Conversion and Mixing; Turbulent Flows; Vortex Dynamics; DNS/LES and Hybrid RANS/LES Methods; Fluid Structure Interaction; Fl最新文献

{"title":"Quantifying the Spatial-Temporal Evolution of Rim/Ligament in Drop Breakup via Digital In-Line Holography","authors":"L. Yao, Jun Chen, P. Sojka, Xue-cheng Wu","doi":"10.1115/FEDSM2018-83470","DOIUrl":"https://doi.org/10.1115/FEDSM2018-83470","url":null,"abstract":"A liquid drop undergoes aerodynamic deformation and breakup when it is exposed into a gas stream. Many techniques were used to measure the size and velocity of the secondary droplets while quantifying the rim/ligament still remains a challenge. An automatic method to extract the 3D properties of the toroidal rim in the bag breakup was recently developed based on digital in-line holography (DIH). To reduce the uncertainty caused by the out-of-focus overlap, a DIH configuration with a slightly rotated view is adopted here. The entire rim is reconstructed by stitching all the sections together. Holograms are recorded with a high-speed camera operated at 20 kHz to study the dynamic evolution of the rim in the bag breakup of an ethanol drop. Both the 3D visualization and z–y view reflect the rim’s structure development within 5.2 ms. The rim expands followed with disintegration into ligaments and relatively larger droplets. The volume of the rim is measured ∼ 95 % and that of the secondary droplets is ∼ 5 % of the initial drop volume before rim breakup. Then the volume of rim/ligament decreases after rim breakup which on the other hand increases the volume fraction of secondary droplets. The total volume of the rim/ligament and fragments is very close to the initial drop volume in most measurements except when the instant swelling happens in local atomization. Then the total measured volume decreases rapidly as the relatively large fragments move out of the field of view.","PeriodicalId":23480,"journal":{"name":"Volume 1: Flow Manipulation and Active Control; Bio-Inspired Fluid Mechanics; Boundary Layer and High-Speed Flows; Fluids Engineering Education; Transport Phenomena in Energy Conversion and Mixing; Turbulent Flows; Vortex Dynamics; DNS/LES and Hybrid RANS/LES Methods; Fluid Structure Interaction; Fl","volume":"2017 19","pages":""},"PeriodicalIF":0.0,"publicationDate":"2018-07-15","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"91548715","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Lift and Drag Forces With Respect to Azimuth Position of a Darrieus Wind Turbine","authors":"Sajid Ali, Sang-Moon Lee, C. Jang","doi":"10.1115/FEDSM2018-83192","DOIUrl":"https://doi.org/10.1115/FEDSM2018-83192","url":null,"abstract":"Tangential force is the most important parameter for driving the blade of a straight bladed H-Darrieus wind turbine forward. The direction of this force is very critical as it may move the blade forward (positive force) or it can also oppose the rotation (negative force). The direction of tangential force depends upon the distribution of two fundamental aerodynamic forces around the wind turbine blade i.e. Lift and drag. Current study aims to understand the impact of lift and drag forces on the tangential force variation with respect to (w.r.t) azimuth position. Commercial CFD software SC/tetra was employed in order to solve the unsteady Reynold-averaged Navier stokes (URANS) equations around the blades. Results show that very small portion (maximum 20% during rotation) of the drag force is actually converted into useful tangential force whereas rest of the drag force is converted into either normal force or negative tangential force (waste of energy). On the other hand, out of all the generated lift force, 70–90 percent is seemed to be beneficial for moving the blade forward and rest of the lift force also tries to oppose the motion (almost 15%). Overall, it was found that only 50–60 percent of the resultant force (lift + drag) acting on the blade, is actually useful to move the blade forward. The study was conducted at seven different tip speed ratios (TSRs) i.e. 1, 2, 2.28, 3, 3.5, 4 and 5 with NACA 0015 airfoil. Relatively higher fluctuations were observed in the distribution of forces at low values of TSRs (1 and 2) as compared to high values of TSRs (4 and 5). The results presented here are only limited to NACA 0015 whereas same methodology can be adopted for other blade profiles in future as well.","PeriodicalId":23480,"journal":{"name":"Volume 1: Flow Manipulation and Active Control; Bio-Inspired Fluid Mechanics; Boundary Layer and High-Speed Flows; Fluids Engineering Education; Transport Phenomena in Energy Conversion and Mixing; Turbulent Flows; Vortex Dynamics; DNS/LES and Hybrid RANS/LES Methods; Fluid Structure Interaction; Fl","volume":"87 22","pages":""},"PeriodicalIF":0.0,"publicationDate":"2018-07-15","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"91407002","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Nozzle Orientation Effects on the Turbulent Structure of Submerged Twin Jets","authors":"C. F. Nwaiwu, M. Agelin-Chaab, M. Tachie","doi":"10.1115/FEDSM2018-83269","DOIUrl":"https://doi.org/10.1115/FEDSM2018-83269","url":null,"abstract":"Nozzle orientation effects on the turbulent structure of submerged twin jets were investigated experimentally. The twin jets were offset from the free surface by the ratio, h/d = 2, where h is the offset height displacement and d is the nozzle’s hydraulic diameter. The experiments were conducted using a pair of rectangular nozzles having an aspect ratio of 3, oriented in both the minor and major axes. The Reynolds number based on the jet exit velocity and nozzle hydraulic diameter was maintained at 4622. The results show a 74% increase in the attachment length for the nozzle oriented in the major axis relative to the minor. The streamwise velocity at the free surface accelerated at a 58% higher rate for the minor axis orientation compared to that of the major axis. The joint probability density function show a dominance of the fast streamwise fluctuation in the generation of the Reynolds shear stress.","PeriodicalId":23480,"journal":{"name":"Volume 1: Flow Manipulation and Active Control; Bio-Inspired Fluid Mechanics; Boundary Layer and High-Speed Flows; Fluids Engineering Education; Transport Phenomena in Energy Conversion and Mixing; Turbulent Flows; Vortex Dynamics; DNS/LES and Hybrid RANS/LES Methods; Fluid Structure Interaction; Fl","volume":"39 1","pages":""},"PeriodicalIF":0.0,"publicationDate":"2018-07-15","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"87702794","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Vortex Identification Study of a Turbulent Cavity Flow","authors":"K. Hammad","doi":"10.1115/FEDSM2018-83048","DOIUrl":"https://doi.org/10.1115/FEDSM2018-83048","url":null,"abstract":"A combined vortex identification and Proper Orthogonal Decomposition (POD) analysis is applied to high-resolution Particle Image Velocimetry (PIV) measurements of a turbulent flow past an open shallow cavity. The PIV measurements, at a cavity depth based Reynolds number of 42,000, capture the flow structure and turbulence, upstream, over, and downstream an open cavity having a length-to-depth ratio of four. Vorticity and second invariant Q of the velocity gradient tensor analysis are used to identify the vortical structures and the overall flow field features. POD analysis is applied to the vorticity and Q fields to identify the most energetic vortical structures and flow features. The results demonstrate the superiority of the combined Q-criterion and POD analysis in identifying distinct vortical structures and their evolution.","PeriodicalId":23480,"journal":{"name":"Volume 1: Flow Manipulation and Active Control; Bio-Inspired Fluid Mechanics; Boundary Layer and High-Speed Flows; Fluids Engineering Education; Transport Phenomena in Energy Conversion and Mixing; Turbulent Flows; Vortex Dynamics; DNS/LES and Hybrid RANS/LES Methods; Fluid Structure Interaction; Fl","volume":"50 1","pages":""},"PeriodicalIF":0.0,"publicationDate":"2018-07-15","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"84680892","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"The Influence of Wrap Angle of Blade on the Internal Flow Field and Hydraulic Performance of Double Suction Pump","authors":"Hao Chang, W. Shi, Wei Li, Jianrui Liu, Lingjiu Zhou, Chuan Wang, Wei Fu, Li Xiaowei","doi":"10.1115/FEDSM2018-83190","DOIUrl":"https://doi.org/10.1115/FEDSM2018-83190","url":null,"abstract":"In order to study the influence rule of wrap angle of blade on the internal flow field and hydraulic performance of double suction pump, 5 kinds of wrap angles of blade with 100°, 110°, 120°, 130° and 140° are designed in this paper. The turbulence model and the grid type are analyzed, the performance of ES350-575 double suction pump is obtained by employ the software CFX. The static pressure and velocity distributions in the cross-section are analyzed. Therefore, the optimal model is obtained, and the relevant external characteristic test is conducted. The result shows that the reasonable increase of the wrap angle of blade can enhance the performance of the pump effectively, which can improve the static pressure and velocity distributions of the internal flow field.","PeriodicalId":23480,"journal":{"name":"Volume 1: Flow Manipulation and Active Control; Bio-Inspired Fluid Mechanics; Boundary Layer and High-Speed Flows; Fluids Engineering Education; Transport Phenomena in Energy Conversion and Mixing; Turbulent Flows; Vortex Dynamics; DNS/LES and Hybrid RANS/LES Methods; Fluid Structure Interaction; Fl","volume":"23 6 1","pages":""},"PeriodicalIF":0.0,"publicationDate":"2018-07-15","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"83518320","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Flow Structure Formed by a Sweeping Jet Ejected Into a Main Flow","authors":"M. Fuchiwaki, S. Raghu","doi":"10.1115/FEDSM2018-83045","DOIUrl":"https://doi.org/10.1115/FEDSM2018-83045","url":null,"abstract":"Various methods of controlling flow separation have been proposed and many studies have been performed on active separation control in correspondence with the flow state. However, their efficiency has been hampered by the requirement of electric power for the added stream. Recently, an active flow separation control device based on a fluidic oscillator that does not require electric power has been reported. This device is able to generate a sweeping jet over a wide spatial range as well as fluid oscillations, and its internal structure eliminates the need for a drive unit. The studies of the flow separation control techniques using the fluidic oscillator have been reported. However, most of these results are mainly contribution of the dynamic forces from the viewpoint of the flow control and the study on the flow mechanism for the separation flow control using the fluidic oscillator have not been understood. Especially, it is not known the interaction between the sweeping jet from the fluidic oscillator and the main flow and the flow structure due to the interaction. In order to make a flow separation control devise with high efficiency using the fluidic oscillator, it is require to be understood the complex flow structure by the interaction between the sweeping jet from the fluidic oscillator and the main flow. The purpose of the present study is to investigate the flow structure by the interaction between the sweeping jet from the fluidic oscillator and the main flow quantitatively by the stereo PIV measurement. The sweeping jet ejected from a fluidic oscillator evidently disrupts the main flow at high velocity ratios, leading to a significant change in flow structure. A high-speed jet appears at the center part of the structure, accompanied by low-speed flow at the outside, producing a 3D distribution. The sweeping jet ejected from the fluidic oscillator maintains the spreading angleas a result of the interaction between the two flows at high velocity ratios.","PeriodicalId":23480,"journal":{"name":"Volume 1: Flow Manipulation and Active Control; Bio-Inspired Fluid Mechanics; Boundary Layer and High-Speed Flows; Fluids Engineering Education; Transport Phenomena in Energy Conversion and Mixing; Turbulent Flows; Vortex Dynamics; DNS/LES and Hybrid RANS/LES Methods; Fluid Structure Interaction; Fl","volume":"23 1","pages":""},"PeriodicalIF":0.0,"publicationDate":"2018-07-15","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"76804480","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Characteristics of Large Vortical Structures in the Shallow Wake Flow With a Gap Near the Bed","authors":"Monsif Shinneeb, R. Balachandar","doi":"10.1115/FEDSM2018-83501","DOIUrl":"https://doi.org/10.1115/FEDSM2018-83501","url":null,"abstract":"PIV measurements were made to investigate the turbulent wake flow generated by a vertical sharp-edged flat plate suspended in a shallow channel flow with a gap near the bed. The purpose of this study is to investigate the behaviour of large vortical structures in the wake flow. The investigation focused on the horizontal velocity field in the mid-distance between the bottom bed and the top free surface. Two different gap heights between the channel bed and the bottom edge of the bluff body was studied. These two cases were compared to the no-gap flow case which is considered as a reference case. The Reynolds number based on the water depth was 45,000. The large vortical structures were exposed by analyzing the PIV velocity fields using the proper orthogonal decomposition (POD) method. Only few modes were used for the POD reconstruction of the velocity fields to recover ∼50% of the turbulent kinetic energy. A vortex identification algorithm was then employed to quantify the number, size, circulation, and direction of rotation of the exposed vortices. A statistical analysis of the distribution of number, size, and strength of the identified vortices was carried out to explore the characteristics of the vortical structures.\u0000 The results revealed that the number of vortical structures increased as a result of the gap flow with a corresponding decrease in the vortex size and strength. This behaviour is attributed to the production of new vortices and the enhancement of the tearing process.","PeriodicalId":23480,"journal":{"name":"Volume 1: Flow Manipulation and Active Control; Bio-Inspired Fluid Mechanics; Boundary Layer and High-Speed Flows; Fluids Engineering Education; Transport Phenomena in Energy Conversion and Mixing; Turbulent Flows; Vortex Dynamics; DNS/LES and Hybrid RANS/LES Methods; Fluid Structure Interaction; Fl","volume":"104 1","pages":""},"PeriodicalIF":0.0,"publicationDate":"2018-07-15","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"77316699","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"An Integrated Approach for the Teaching of Pipe Network Analysis Using Project Based Learning","authors":"I. Ibrahim, M. W. B. Khalid, G. Shoukat, Muhammad Sajid","doi":"10.1115/FEDSM2018-83382","DOIUrl":"https://doi.org/10.1115/FEDSM2018-83382","url":null,"abstract":"This paper discusses the results of a study regarding the impact of using Project-Based Learning (PBL) to enhance the understanding of the concepts related to Pipe Network Analysis, a subtopic of Fluid Mechanics, studied by students enrolled in a mechanical engineering degree. It has been frequently reported by students and professors alike, that a lecture-only approach is not effective in terms of helping students grasp the fundamentals of a subject, nor does it help students in actual problem solving where different variables have to be catered to, which may have been ignored in a conventional lecture. Therefore, in this study, a more open-ended, complex project-based approach was used in addition to the lectures on the subject of Pipe Network Analysis. The project required students to design a pipe network for a scaled setup based on specified fluid flow and pressure head requirements at different nodes. An experimental setup that implemented these pipe networks was also developed in order to validate the theoretical results. The students’ grades and their documented responses were used as the criterion for compiling and analyzing the results. We also describe how we incorporated PBL into the classrooms in order to improve the learning experience, and evaluate the efficacy of the proposed method. The overall results show that the students were proactively engaged in the PBL activity, linking their knowledge to the real world, which ultimately led to improved concept development.","PeriodicalId":23480,"journal":{"name":"Volume 1: Flow Manipulation and Active Control; Bio-Inspired Fluid Mechanics; Boundary Layer and High-Speed Flows; Fluids Engineering Education; Transport Phenomena in Energy Conversion and Mixing; Turbulent Flows; Vortex Dynamics; DNS/LES and Hybrid RANS/LES Methods; Fluid Structure Interaction; Fl","volume":"31 1","pages":""},"PeriodicalIF":0.0,"publicationDate":"2018-07-15","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"80344602","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Flow Separation Control and Drag Reduction for a Two-Dimensional Boat-Tailed Bluff Body Through Transverse Grooves","authors":"A. Mariotti, G. Buresti, M. Salvetti","doi":"10.1115/FEDSM2018-83458","DOIUrl":"https://doi.org/10.1115/FEDSM2018-83458","url":null,"abstract":"The present work focuses on a passive strategy consisting in the introduction of properly contoured transverse grooves to delay the flow separation occurring on a boat-tailed bluff body before its sharp-edged base. We consider a two-dimensional body having a cross-section with a 3:1 elliptical forebody and a rectangular main part followed by a circular-arc boat tail. We carry out Variational Multiscale Large Eddy Simulations at Re = Du∞/v = 9.6 × 104. A boat-tail drag reduction of the order of 9.7% is produced by the significant delay of the flow separation caused by the groove and by the consequent increase of the base pressure. This effect is mainly due to the relaxation of the no-slip condition over the small and steady recirculation region inside the groove, which reduces the momentum losses near the wall and thus delays boundary layer separation. The flow control device is also robust to small variations of the groove location and depth.","PeriodicalId":23480,"journal":{"name":"Volume 1: Flow Manipulation and Active Control; Bio-Inspired Fluid Mechanics; Boundary Layer and High-Speed Flows; Fluids Engineering Education; Transport Phenomena in Energy Conversion and Mixing; Turbulent Flows; Vortex Dynamics; DNS/LES and Hybrid RANS/LES Methods; Fluid Structure Interaction; Fl","volume":"37 1","pages":""},"PeriodicalIF":0.0,"publicationDate":"2018-07-15","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"90477247","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Mass Flow Performance for Large Aspect Ratio Supersonic Boundary Layer Bleed Holes","authors":"G. Papadopoulos, Gary Go, F. Celentano, R. Bakos","doi":"10.1115/FEDSM2018-83052","DOIUrl":"https://doi.org/10.1115/FEDSM2018-83052","url":null,"abstract":"Accurate estimation of the bleed orifice flow coefficient, which relates bleed plenum pressure to mass flow removed, is important to predicting inlet performance, as well as, estimating bleed drag. Much of the flow coefficient data at conditions of interest to inlet designers is based on bleed plates with multiple rows of holes. The flow coefficient for these plates is typically presented as a function of bleed plenum pressure normalized by the freestream total pressure. Numerical simulations of the flowfield at the entrance of the bleed hole show that the flow is complex, especially for supersonic free stream flow, whereby an alternating expansion/compression wave pattern initiates at the porous bleed surface as the flow turns to enter the hole. This implies that a significant portion of the tangential flow total pressure is given up upon entering a 90° hole.\u0000 For large aspect ratio (length-to-diameter ratio) bleed holes the effect of the frictional pressure drop is to lower the required plenum pressure to achieve a given mass flow. Conversely, the mass flow will be reduced due to the higher pressure at the start of the duct. Empirical data show that the flow coefficient for supersonic boundary layer bleed holes stops increasing as the plenum pressure to total pressure ratio continues to decrease, indicating that the flow becomes choked. Thus the chocked flow condition helps to make the bleed hole mass flow under these conditions less sensitive or insensitive to the effects of friction caused by the extended hole length. The extent to which this happens is the focus of the current effort, with the paper reporting on experimental and numerical results on flow characteristics and mass flow performance of supersonic bleed holes featuring a range of aspect ratios beyond what has been reported in the past.","PeriodicalId":23480,"journal":{"name":"Volume 1: Flow Manipulation and Active Control; Bio-Inspired Fluid Mechanics; Boundary Layer and High-Speed Flows; Fluids Engineering Education; Transport Phenomena in Energy Conversion and Mixing; Turbulent Flows; Vortex Dynamics; DNS/LES and Hybrid RANS/LES Methods; Fluid Structure Interaction; Fl","volume":"4 1","pages":""},"PeriodicalIF":0.0,"publicationDate":"2018-07-15","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"88308781","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}