{"title":"Accurate and inexpensive performance monitoring for variability-aware systems","authors":"Liangzhen Lai, Puneet Gupta","doi":"10.1109/ASPDAC.2014.6742935","DOIUrl":"https://doi.org/10.1109/ASPDAC.2014.6742935","url":null,"abstract":"Designing reliable integrated systems has become a major challenge with shrinking geometries, increasing fault rates and devices which age substantially in their usage life. The proposed research is motivated by the observation that many of the in-field failures are delay failures and several variability signatures are also delay-related. The origins of temporal delay fluctuations include manufacturing variability, voltage/temperature changes, negative or positive bias temperature instability-related Vth degradation, etc. Since the actual delay changes depend on process variations as well as workload, on-chip monitoring may be the best way of predicting them. There is a need to monitor circuit performance during manufacturing as well as at runtime to predict achievable performance and warn against impending failures. Adaptive mechanisms in hardware and/or software can optimize the trade-off between errors, energy and performance based on the feedback from runtime circuit performance monitors. This paper presents approaches for automated synthesis of design-dependent performance monitors. These monitors can be used to predict impending delay failures relatively inexpensively. For low-overhead monitoring, we propose multiple design-dependent ring oscillators (DDROs) as smart canary structures which can reliably predict achievable chip frequency but with margins for local variations. Early silicon results indicate that DDROs can reduce delay monitoring error by 35% compared to conventional ring oscillators. To further improve the prediction (albeit at a higher overhead), we propose in-situ slack monitors (SlackProbe) which can match local variations as well at overheads much smaller than monitoring all sequential elements. SlackProbe reduces the number of monitors required by over 15X with 5% additional delay margin in several commercial processor benchmarks. Finally, we show an example of software testbed that demonstrates a variability-aware system that utilizes the hardware monitors and operates with both hardware and software adaptation.","PeriodicalId":234635,"journal":{"name":"2014 19th Asia and South Pacific Design Automation Conference (ASP-DAC)","volume":"47 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2014-02-20","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"115223500","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Statistical analysis of random telegraph noise in digital circuits","authors":"Xiaoming Chen, Yu Wang, Yu Cao, Huazhong Yang","doi":"10.1109/ASPDAC.2014.6742883","DOIUrl":"https://doi.org/10.1109/ASPDAC.2014.6742883","url":null,"abstract":"Random telegraph noise (RTN) has become an important reliability issue at the sub-65nm technology node. Existing RTN simulation approaches mainly focus on single trap induced RTN and transient response of RTN, which are usually time-consuming for circuit-level simulation. This paper proposes a statistical algorithm to study multiple traps induced RTN in digital circuits, to show the temporal distribution of circuit delay under RTN. Based on the simulation results we show how to protect circuit from RTN. Bias dependence of RTN is also discussed.","PeriodicalId":234635,"journal":{"name":"2014 19th Asia and South Pacific Design Automation Conference (ASP-DAC)","volume":"25 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2014-02-20","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"131328502","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
W. Deng, A. Musa, T. Siriburanon, M. Miyahara, K. Okada, A. Matsuzawa
{"title":"A dual-loop injection-locked PLL with all-digital background calibration system for on-chip clock generation","authors":"W. Deng, A. Musa, T. Siriburanon, M. Miyahara, K. Okada, A. Matsuzawa","doi":"10.1109/ASPDAC.2014.6742854","DOIUrl":"https://doi.org/10.1109/ASPDAC.2014.6742854","url":null,"abstract":"This paper presents a compact, low power, and low jitter dual-loop injection-locked PLL with synthesizable all-digital background calibration system for clock generation. Implemented in a 65nm CMOS process, this work demonstrates a 0.7-ps RMS jitter at 1.2 GHz while having 0.97-mW power consumption resulting in an FOM of -243dB. It also consumes an area of only 0.022mm2 resulting in the best performance-area trade-off system presented up-to-date.","PeriodicalId":234635,"journal":{"name":"2014 19th Asia and South Pacific Design Automation Conference (ASP-DAC)","volume":"156 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2014-02-20","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"133083345","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"General purpose cross-referencing Microfluidic Biochip with reduced pin-count","authors":"Jackson H. C. Yeung, Evangeline F. Y. Young","doi":"10.1109/ASPDAC.2014.6742896","DOIUrl":"https://doi.org/10.1109/ASPDAC.2014.6742896","url":null,"abstract":"The number of control pins used is a major factor affecting the manufacturing cost of Digital Microfluidic Biochip (DMFB). Pin-count on a DMFB can be reduced by sharing of control pins between electrodes. Most existing works on reducing pin-count are problem specific. Problem specific optimizations result in DMFB that can only perform certain specific bioassays. Cross-Referencing DMFB has a full array layout that is fully reconfigurable for any bioassay. Conventional Cross-Referencing DMFB uses m + n number of pins. We have devised a non-problem specific pin assignment methodology that uses only √2(√m + √n) number of pins. The resulting DMFB are still fully reconfigurable. We have developed a droplet router specifically for cross-referencing DMFB with shared control pins. All real bioassay tested can be routed using a fixed and problem independent control pin mapping. Reduction on pin count ranges from 50% to 67%.","PeriodicalId":234635,"journal":{"name":"2014 19th Asia and South Pacific Design Automation Conference (ASP-DAC)","volume":"15 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2014-02-20","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"134116897","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
R. Bishnoi, Mojtaba Ebrahimi, Fabian Oboril, M. Tahoori
{"title":"Architectural aspects in design and analysis of SOT-based memories","authors":"R. Bishnoi, Mojtaba Ebrahimi, Fabian Oboril, M. Tahoori","doi":"10.1109/ASPDAC.2014.6742972","DOIUrl":"https://doi.org/10.1109/ASPDAC.2014.6742972","url":null,"abstract":"Magnetic Random Access Memory (MRAM) is a very promising emerging memory technology because of its various advantages such as non-volatility, high density and scalability. In particular, Spin Orbit Torque (SOT) MRAM is gaining interest as it comes along with all the benefits of its predecessor Spin Transfer Torque (STT) MRAM, but is supposed to eliminate some of its shortcomings. Especially the split of read and write paths in SOT-MRAM promises faster access times and lower energy consumption compared to STT-MRAM. In this work, we provide a very detailed analysis of SOT-MRAM at both circuit- and architecture-level. We present a detailed evaluation of performance and energy related parameters and compare the novel SOT-MRAM with several other memory technologies. Our architecture-level analysis shows that with a hybrid-combination of SRAM for the L1-cache and SOT-MRAM for the L2-cache the energy consumption can be reduced by 63 % in average while the performance can be increased by 1 %. In addition, the memory area is 43% lower compared to an SRAM-only configuration.","PeriodicalId":234635,"journal":{"name":"2014 19th Asia and South Pacific Design Automation Conference (ASP-DAC)","volume":"185 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2014-02-20","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"133567319","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Jerry C. Y. Ku, Ryan H.-M. Huang, Louis Y.-Z. Lin, Charles H.-P. Wen
{"title":"Suppressing test inflation in shared-memory parallel Automatic Test Pattern Generation","authors":"Jerry C. Y. Ku, Ryan H.-M. Huang, Louis Y.-Z. Lin, Charles H.-P. Wen","doi":"10.1109/ASPDAC.2014.6742967","DOIUrl":"https://doi.org/10.1109/ASPDAC.2014.6742967","url":null,"abstract":"Multi-core machines enable the possibility of parallel computing in Automatic Test Pattern Generation (ATPG). With sufficient computing power, previously proposed parallel ATPG has reached near linear speedup. However, test inflation in parallel ATPG yet arises as a critical problem and limits its practicality. Therefore, we developed a parallel ATPG system that incorporates (1) concurrent interruption (CI), (2) ripple compaction (RC) and (3) fan-in-cone based fault ordering (FIC) to deal with such problem. Concurrent interruption aborts test generation on simultaneously detected faults by fault simulation. Ripple compaction combines tests for different faults while fan-in-cone based fault ordering strategically arranges the fault list to reduce the number of test generations and thus speeds up the ATPG process. According to our experiments, the proposed parallel ATPG system effectively reduces 11% pattern count and achieves ~0% test inflation while maintaining an average of 6.5X speedup with no attenuation in fault coverage on experimental circuits.","PeriodicalId":234635,"journal":{"name":"2014 19th Asia and South Pacific Design Automation Conference (ASP-DAC)","volume":"40 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2014-02-20","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"114114213","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Normally-off computing project: Challenges and opportunities","authors":"Hiroshi Nakamura, Takashi Nakada, Shinobu Miwa","doi":"10.1109/ASPDAC.2014.6742850","DOIUrl":"https://doi.org/10.1109/ASPDAC.2014.6742850","url":null,"abstract":"Normally-Off is a way of computing which aggressively powers off components of computer systems when they need not to operate. Simple power gating cannot fully take the chances of power reduction because volatile memories lose data when power is turned off. Recently, new non-volatile memories (NVMs) have appeared. High attention has been paid to normally-off computing using these NVMs. In this paper, its expectation and challenges are addressed with a brief introduction of our project started in 2011.","PeriodicalId":234635,"journal":{"name":"2014 19th Asia and South Pacific Design Automation Conference (ASP-DAC)","volume":"20 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2014-02-20","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"114922434","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"ArISE: Aging-aware instruction set encoding for lifetime improvement","authors":"Fabian Oboril, M. Tahoori","doi":"10.1109/ASPDAC.2014.6742891","DOIUrl":"https://doi.org/10.1109/ASPDAC.2014.6742891","url":null,"abstract":"Microprocessors fabricated at nanoscale nodes are exposed to accelerated transistor aging due to Bias Temperature Instability and Hot Carrier Injection. As a result, device delays increase over time reducing the Mean Time To Failure (MTTF) of the processor. To address this challenge, many (micro)-architectural techniques target the execution stage of the instruction pipeline, as this one is typically most critical. However, also the decoding stages can become aging-critical and limit the microprocessor lifetime, as we will show in this work. In this paper, we propose a novel aging-aware instruction set encoding methodology (ArISE), that improves the instruction encoding iteratively using a heuristic algorithm. Our experimental results show that MTTF of the decoding stages can be improved by 1.93x with negligible implementation costs.","PeriodicalId":234635,"journal":{"name":"2014 19th Asia and South Pacific Design Automation Conference (ASP-DAC)","volume":"16 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2014-02-20","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"116219637","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Analytical placement of mixed-size circuits for better detailed-routability","authors":"Shuai Li, Cheng-Kok Koh","doi":"10.1109/ASPDAC.2014.6742864","DOIUrl":"https://doi.org/10.1109/ASPDAC.2014.6742864","url":null,"abstract":"We propose an analytical placer for generating placement results that can be detailed-routed faster and have fewer violation of design rules. By including a group of pin density constraints in its mathematical formulation, the placer manages to alleviate pin congestion when distributing cells. Moreover, for mixed-size circuits, we adopt a scaled smoothing method to minimize the possible negative influence of fixed macro blocks in placement. As a result, we have few cells overlapping with fixed blocks after global placement, implying that the global placement solution resembles a legal solution more and that legalization has less perturbance to the placement quality. Also, in the final placement result, fewer cells are around macro blocks, whose negative effect in the future routing stage can thus be reduced. Routing solutions obtained by a commercial router show that for most benchmark circuits, detailed routing solutions with fewer violations can be achieved on the placement results generated by our analytical placer.","PeriodicalId":234635,"journal":{"name":"2014 19th Asia and South Pacific Design Automation Conference (ASP-DAC)","volume":"214 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2014-02-20","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"133512117","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
T. Karnik, J. Tschanz, N. Borkar, J. Howard, S. Vangal, V. De, S. Borkar
{"title":"Resiliency for many-core system on a chip","authors":"T. Karnik, J. Tschanz, N. Borkar, J. Howard, S. Vangal, V. De, S. Borkar","doi":"10.1109/ASPDAC.2014.6742921","DOIUrl":"https://doi.org/10.1109/ASPDAC.2014.6742921","url":null,"abstract":"Resilient techniques are commonly employed for dynamic and static variation tolerance. In this paper, we present an adaptive clocking technique that achieves 31% throughput increase with 15% energy reduction, and an adaptive interconnect fabric technique that increases bandwidth by 63% with 14.6% energy reduction. We also discuss variations in many-core microprocessors and some techniques to enable a resilient many-core system on a chip.","PeriodicalId":234635,"journal":{"name":"2014 19th Asia and South Pacific Design Automation Conference (ASP-DAC)","volume":"16 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2014-02-20","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"133552135","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}