International Journal of Engineering and Computer Science最新文献

{"title":"Optimization of Renewable Energy Production by Utilizing Methane Gas And plastic waste from sources at the Puuwatu landfill Kendari City","authors":"Y. Gunawan, L. Karimuna, M. Kano, Nanang Endriatno","doi":"10.18535/IJECS/V10I03.4571","DOIUrl":"https://doi.org/10.18535/IJECS/V10I03.4571","url":null,"abstract":"This study aims to determine how much electric power can be generated from methane gas obtained from organic waste and how much electrical energy has not been utilized from the potential methane gas produced and how much volume of pyrolysis oil is produced from plastic waste produced by the people of the City. Kendari. To obtain the electrical energy produced, the volume of waste is first calculated so that the potential for waste (Q), Biogas Production Volume (VBS), and Methane Gas Volume (VGM) can be obtained. Referring to Kadir's research, 2012, the volume of pyrolysis oil produced by Kendari City is obtained. The results showed that the energy produced from the Puuwatu TPA in a daily average was 288,466,5332 kWh. While the energy flowing through the Mandirin Energi area is 125 houses and each house with a power of 450 VA (MCB 2 Ampere), the daily count used to fulfill the energy independent area is 1,080 kWh, so that energy has not been utilized from its potential. in Puuwatu TPA is 287,386.5332 kWh. While the production of plastic waste in Kendari City per year is 792 tons, the average plastic waste produced in 500 grams is 423.25 ml of pyrolysis oil or the equivalent of 1000 grams produces pyrolysis oil of 845.6 milliliters, so the amount of plastic waste in Kendari City per year year it can produce pyrolysis oil of 670 428 000 liters. \u0000  \u0000Keywords: Organic Waste, Methane Gas, Electrical Energy, Pyrolysis Oil, Plastric Waste.","PeriodicalId":231371,"journal":{"name":"International Journal of Engineering and Computer Science","volume":"64 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2021-03-29","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"133246791","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Performance evaluation of super resolution algorithms in generating high resolution images using MSE and PSNR","authors":"P. Murugan, V. Gautam, V. Ramanathan","doi":"10.18535/IJECS/V10I02.4560","DOIUrl":"https://doi.org/10.18535/IJECS/V10I02.4560","url":null,"abstract":"In recent days, requirement of high spatial resolution remote sensing data in various fields has increased tremendously.  High resolution satellite remote sensing data is obtained with long focal length optical systems and low altitude. As fabrication of high-resolution optical system and accommodating on the satellite is a challenging task, various alternate methods are being explored to get high resolution imageries. Alternately the high-resolution data can be obtained from super resolution techniques. The super resolution technique uses single or multiple low-resolution mis-registered data sets to generate high resolution data set.  Various algorithms are employed in super resolution technique to derive high spatial resolution. In this paper we have compared two methods namely overlapping and interleaving methods and their capability in generating high resolution data are presented.","PeriodicalId":231371,"journal":{"name":"International Journal of Engineering and Computer Science","volume":"48 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2021-02-28","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"120956791","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Three Point Boundary Value Problems Associated with First Order Fuzzy Difference Systems-Existence and Uniqueness via the Best Least Square Solution","authors":"N. Swapna, Udaya Kumar Susarla","doi":"10.18535/IJECS/V10I1.4545","DOIUrl":"https://doi.org/10.18535/IJECS/V10I1.4545","url":null,"abstract":"This paper presents a criteria for the existence and uniqueness of solutions to first order fuzzy difference system using QR-algorithm. Modified QR-algorithm is presented for fuzzy linear systems using singular value decomposition.","PeriodicalId":231371,"journal":{"name":"International Journal of Engineering and Computer Science","volume":"32 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2021-01-03","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"130946248","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Why buildings collapse in the earthquakes, Turkey case","authors":"A. S. Ecemis","doi":"10.18535/IJECS/V9I12.4548","DOIUrl":"https://doi.org/10.18535/IJECS/V9I12.4548","url":null,"abstract":"Many European countries with shores to the Mediterranean are under earthquake risk. Earthquakes in Turkey in the last 50 years caused lost of more than 50,000 human lives. Reinforced concrete buildings can collapse and cause loss of life even in earthquakes smaller than the design earthquakes defined by the seismic code. In this study, housing construction system and earthquake-resistant buildings in terms of system production problems in Turkey were discussed. The most common damage types after earthquakes are summarized.","PeriodicalId":231371,"journal":{"name":"International Journal of Engineering and Computer Science","volume":"7 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2020-12-11","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"127220417","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Dynamic Response at Various Points of Aluminum Cantilever Beam","authors":"Nanang Endriatno, B. Sudia, R. R. Sisworo, M. Faisal","doi":"10.18535/IJECS/V9I12.4546","DOIUrl":"https://doi.org/10.18535/IJECS/V9I12.4546","url":null,"abstract":"The aim of the study was to analyze the dynamic response along an aluminum cantilever beam. The data measured were displacement (mm), velocity (mm / s), and acceleration (m/s 2 ) with 3 measurement positions on the cantilever beam. The 6061 series aluminum beam being used have length of 80 cm, height of 32 cm, and width of 32 cm. The data were collected experimentally using a vibration meter to measure beam vibrations at the various positions from the cantilever beam at a distance from support: 10 cm, 35 cm, and 60 cm, respectively. The results of the analysis showed that the values of the displacement, velocity and acceleration of the object vibrations change when the measuring point was far from the cantilever support. The maximum displacement value is 0.02 mm at 60 cm from the support, and the lowest value is 0.12 mm at 10 cm. The velocity value also increases, maximum value is 38.58 mm/s at 60 cm from the support, and the minimum value is 12.30 mm/s at 10 cm from the support. Accordingly, the acceleration value is maximum at 60 cm from the support: 91150 mm/s 2 and the minimum at 10 cm: 66900 mm/s 2 .","PeriodicalId":231371,"journal":{"name":"International Journal of Engineering and Computer Science","volume":"154 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2020-12-07","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"131758917","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Stability Analysis of Linear Sylvester System of First Order Differential Equations","authors":"Kasi Viswanadh V Kanuri, SriRam Bhagavathula, K. Murty","doi":"10.18535/IJECS/V9I11.4544","DOIUrl":"https://doi.org/10.18535/IJECS/V9I11.4544","url":null,"abstract":"In this paper, we establish stability criteria of the linear Sylvester system of matrix differential equation using the new concept of bounded solutions and deduce the existence of Ψ-bounded solutions as a particular case.","PeriodicalId":231371,"journal":{"name":"International Journal of Engineering and Computer Science","volume":"129 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2020-11-25","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"134515206","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Percentage Analysis Mixed of CPO, Phosphic Acid and Sodium Hydroxide as a Replacement for Diesel Engine Oil Fuel Using a Calorize Test","authors":"Y. Gunawan, L. Hasanuddin, R. R. Sisworo, A. Lolok, Bunyamin, Nanang Endriatno, Muhlas Adi Putra","doi":"10.18535/IJECS/V9I09.4529","DOIUrl":"https://doi.org/10.18535/IJECS/V9I09.4529","url":null,"abstract":"One of the researches being developed is to produce methyl esters from CPO through transesterification reaction of vegetable oil (triglycerides) with methanol. Biodiesel from crude palm oil is a new hope for answering some of the energy needs. know the rate of combustion of the biodiesel produced. Biodiesel that is produced from a mixture of CPO, phosphoric acid and sodium hydroxide, with a percentage of I. 98% CPO, 1% Phosphoric Acid, 1% Sodium Hydroxide: II. 95% CPO, 2% Phosphoric Acid, 3% Sodium Hydroxide: III. 95% CPO, 3% Phosphoric Acid, 2% Sodium Hydroxide. The results showed that the most effective mixture was 95% CPO, 3% acid phosphate and 2% sodium hydroxide with a burning rate of 0.309 g / minute in 30.42 minutes with a final temperature of 57 (oC).","PeriodicalId":231371,"journal":{"name":"International Journal of Engineering and Computer Science","volume":"82 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2020-09-21","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"124919594","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"An Assessment of the Impact and Benefits of Total Productive Maintenance (TPM) On Manufacturing Profitability: A Case Study of a Food Processing Industry in Nigeria","authors":"Kalwang, M. M., Kulla D. M., Agontu J. A., Mafai, G. S","doi":"10.18535/ijecs/v9i09.4511","DOIUrl":"https://doi.org/10.18535/ijecs/v9i09.4511","url":null,"abstract":"1 Formally Operations Engineer, Grand Cereals and Oil Mills (GCOML) Ltd, Jos-Nigeria 2 Department of Mechanical Engineering, Ahmadu Bello University, Zaria-Nigeria 3 Department of Mechanical Engineering, Plateau State Polytechnic, Barkinladi-Nigeria 4 Formally Chief Engineer, Grand Cereals and Oil Mills (GCOML) Ltd, Jos-Nigeria Abstract This study was carried out to assess the impact and benefits of Total Productive Maintenance on manufacturing profitability awareness for Grand Cereals Ltd., Jos-Nigeria). The research objective is to assess the impact and benefits of TPM on manufacturing profitability of the company. Data relevant to the study were collected using designed questionnaire, structured interviews, direct observations and company records. The Statistical Package for Social Sciences (SPSS) and Microsoft Excel were used in analysing the data obtained. The results show that the frequency of machine and equipment breakdowns is 58% often and 42% rarely. The research also reviewed that 84% of machine operators were not involved in maintenance activities with only 16% involvement. As regards to the effectiveness of the maintenance technique(s) used, 76% was rated good while 24% was rated fair. Cereal Mill Overall Plant Effectiveness (OPE) was obtained at 38% which was below the world class standard by almost 50%. Equipment downtime was a major cause of plant underutilization with 91% caused by shortage of critical spare parts and 9% shortage of raw materials. On TPM awareness, 80% of the employees have been aware of the TPM concept while 98% indicated the concept of TPM would help improve the current maintenance system and 2% were not sure.20% of the employees were not aware of TPM while 80% of employees indicated that the company does not implement TPM, with 20% not sure that the TPM concept can help improve the current maintenance system. Based on these results, knowledge and information sharing, operator involvement, engagement of all employees from top management to lower level and training should be considered. The effective implementation of TPM model could increase the competition of the company in the dynamic business environment. Thus, adoption and effective implementation of TPM is recommended for the company towards achieving improvement in its manufacturing profitability.","PeriodicalId":231371,"journal":{"name":"International Journal of Engineering and Computer Science","volume":"32 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2020-09-10","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"129104941","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Effective Network Level Optimization for Bridges Maintenance","authors":"S. Hadji","doi":"10.18535/ijecs/v9i09.4525","DOIUrl":"https://doi.org/10.18535/ijecs/v9i09.4525","url":null,"abstract":"Abstract: The objective of this paper is to present an effective new methodology to optimize the maintenance costs of bridges stock. Optimization takes place at the network level and not in a project level (bridge by bridge). The dynamics of passage between bridges condition state (from 1 to 5) is achieved by the Markov chains probabilistic method. The Markov transition matrix is determined either by ratios of total areas and areas degraded annually, or by the resolution of an optimization problem. In the latter case, the nonlinear optimization algorithm SQP (Sequanciel Quadratic Programming) is developed. A bridge maintenance matrix is introduced in the calculation of the repair cost. The originality of our approach is to parameterize this matrix by introducing the different optimization variables of the problem. Finally, the cost function to be optimized annually is calculated and optimized by a genetic algorithm. This cost function represents the cost of maintaining the entire asset.","PeriodicalId":231371,"journal":{"name":"International Journal of Engineering and Computer Science","volume":"434 4","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2020-09-09","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"113986698","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"A Peek into Theory of Automation with Applications to Various Branches of Science","authors":"N Divyalaxmi","doi":"10.18535/ijecs/v9i09.4524","DOIUrl":"https://doi.org/10.18535/ijecs/v9i09.4524","url":null,"abstract":"Potti Sriramulu Nellore, Andhra Pradesh, India Abstract: In this paper, we shall be concerned with the existence and uniqueness of solution to threepoint boundary value problems associated with a system of first order matrix difference system. Shortest and Closest Lattice vector methods are used as a tool to obtain the best least square solution of the three-point boundary value problems when the characteristic matrix D is rectangular.","PeriodicalId":231371,"journal":{"name":"International Journal of Engineering and Computer Science","volume":"33 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2020-09-05","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"116214124","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}