{"title":"Investigation of the Effects of the Different Laser Powers on the Steel Surface","authors":"Timur CANEL","doi":"10.58688/kujs.1205783","DOIUrl":"https://doi.org/10.58688/kujs.1205783","url":null,"abstract":"In this study, grooves were created on a 3 mm thick steel plate by using a carbon dioxide laser at different laser powers at a constant speed. High-resolution images of the laser-processed surfaces were taken with a high-resolution stereo microscope. The molten zone and heat-affected zone widths of the troughs were measured using the images. To reduce the error rate, measurements were made from 5 different regions on the obtained grooves. Finally, the changes in the molten zone and heat-affected zone widths against the applied laser power were examined graphically. As a result, it has been observed that the widths were increasing by laser power with slowing down. Heat Affected Zone and Molten zone widths have changed at the same rate. As the energy transferred to the material surface increases, both the Heat Affected Zone and the molten zone width has increased. The applied laser power has been studied from 40 W to 115 W. Heat Affected Zone Size increased almost linearly when laser power was increased from 40 W to 80 W. It has been observed that the HAZ size increase was less for higher power values.","PeriodicalId":216035,"journal":{"name":"Kafkas Üniversitesi Fen Bilimleri Enstitüsü Dergisi","volume":"16 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2023-10-12","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"135923028","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Redoks Polimerizasyonu ile Epoksi Reçine İçeren Poli(GMA-b-EG) Blok Kopolimerinin Sentezi ve Karakterizasyonu","authors":"Melahat GÖKTAŞ, Cengiz AYKAÇ","doi":"10.58688/kujs.1239233","DOIUrl":"https://doi.org/10.58688/kujs.1239233","url":null,"abstract":"In this study, poly(glycidyl methacrylate-block-ethylene glycol) [P(GMA-b-EG)] epoxy-based copolymer was synthesized and evaluated by redox polymerization. For this purpose, poly(GMA-b-EG) block copolymer containing epoxy-resin was synthesized by redox polymerization of glycidyl methacrylate using polyethylene glycol (PEG-3000) macroinitiator in the presence of cerium ammonium nitrate [Ce(NH4)2(NO3)6] catalyst. The synthesized epoxy-based copolymer was characterized by FTIR, 1H-NMR, DSC, TGA, and SEM spectroscopic methods. The molecular weight of the epoxy-based copolymer was also determined by GPC. The epoxy-based copolymer has a relatively narrow molecular weight and distribution. The DSC result showed that the glass transition temperature value of the epoxy-based copolymer was 28 oC, different from that of the homopolymer. SEM analysis showed that the surface morphology of PEG and epoxy-based copolymers was different. It has been proven by TGA analysis that the epoxy-based copolymer has two different decomposition temperatures of 160 °C and 400 °C.","PeriodicalId":216035,"journal":{"name":"Kafkas Üniversitesi Fen Bilimleri Enstitüsü Dergisi","volume":"60 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2023-10-12","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"135923301","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Ortaokul Öğrencilerinin Sosyal Ağ Kullanım Analizi: Kars İli Örneği","authors":"Ezgi Pelin YILDIZ, Duygu UÇUM YİĞİT","doi":"10.58688/kujs.1247108","DOIUrl":"https://doi.org/10.58688/kujs.1247108","url":null,"abstract":"Bilgi çağının bir getirisi olarak gelişen teknoloji furyasının insanlığı mecbur kıldığı ve hayatımızın bir parçası haline gelen sosyal ağ; her geçen gün biraz daha yaşamımızın odak noktası haline gelmiştir. Öncesinde sayılı ailenin evlerine girebilen teknolojik cihazların var olduğu günlerden, günümüzde yeni doğan çocukların dahi sosyal medyada bir profile sahip olduğu günlere doğru ilerlemiş bulunmaktayız. Sosyal ağların insanların iletişimini, etkileşimini, işbirliğini, çalışmasını ve hatta öğrenme sürecini bile yeniden şekillendirdiği günümüzde, bu çalışmanın amacı ortaokul öğrenimine devam eden 5-6-7-8. sınıf öğrencilerinin sosyal ağ kullanımın analiz edilmesidir. Bu amaç doğrultusunda bu çalışmada Kars ilinde bulunan bir devlet Ortaokulunun 5. sınıf A/B - 6.sınıf A/B - 7.sınıf A/B - 8. sınıf A/B öğrencileri üzerinde anket uygulaması gerçekleştirilmiştir. Toplanan anket sonuçları ilgili istatistiksel testler yardımı ile analiz edilmiştir. Ankete 85 kız, 87 erkek olmak üzere toplam 172 öğrenci katılmıştır. Çalışmada nicel araştırma yöntemlerinden tarama modeli kullanılmıştır. 28 sorudan oluşan ankette öğrencilerin demografik bilgilerini ortaya koymak amacıyla katılımcılara sınıf, şube, cinsiyet, uyku durumu, başarı durumu gibi sorular yöneltilirken; sosyal ağ kullanımını tespit etmede hangi sosyal ağları kullandıkları, ne kadar süredir kullandıkları, gün içinde ortalama internet kullanımları gibi sorular yöneltilmiştir. Uygulanan 28 soruluk anket ile; öğrencilerin demografik özellikleri ile sosyal ağlar üzerindeki faaliyet durumları arasındaki ilişkinin tespit edilmesi amaçlanmıştır. Veriler SPSS 24 programı ile analiz edilerek; öğrencilerin sosyal medyada ne amaçla vakit geçirdikleri ve bu kullanımın öğrenciler üzerindeki etkileri tespit edilmeye çalışılmıştır. Araştırmada elde edilen sonuçların gençlerin sosyal medya ortamlarını kullanım sıklığından yola çıkarak ilerde oluşabilecek internet bağımlılığı, cep telefonu bağımlılığı (Nomofobi) gibi olumsuz durumlara karşı alınabilecek önlemlerin farkındalığı açısından önem arz edeceği öngörülmektedir.","PeriodicalId":216035,"journal":{"name":"Kafkas Üniversitesi Fen Bilimleri Enstitüsü Dergisi","volume":"11 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2023-10-12","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"135923016","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Ahmet Turan TEKEŞ, Aslıhan Aycan TANRIVERDİ, Ahmet Muammer CANEL
{"title":"Investigation of Swelling Properties and Liquefaction of Solid Fuels","authors":"Ahmet Turan TEKEŞ, Aslıhan Aycan TANRIVERDİ, Ahmet Muammer CANEL","doi":"10.58688/kujs.1120954","DOIUrl":"https://doi.org/10.58688/kujs.1120954","url":null,"abstract":"In this study, the effect of various parameters on the swelling of Edirne Uzunköprü, Edirne Keşan Çanakkale Yeniçirpılar and Bursa Mustafa Kemal Paşa lignites was investigated. In the first part of the study, swelling processes were applied to the lignites. Swelling measurements were made in closed glass tubes using 10 different solvents. Swelling ratios of lignite samples treated with solvents were determined and the dependence of these ratios on the properties of the solvent was examined. In the second part, the original lignite samples, swollen with various solvents, were subjected to soxhlet extraction with THF and the liquid product yields obtained from each sample were determined. Then, the same samples were extracted with toluene under supercritical conditions, and the effects of temperature, pressure, and pre-expansion on the extract yield were investigated. Extract yields of lignite samples swollen with solvents such as THF, TBAH, DMSO, DMF, and EDA were found to be higher than those of other solvents. The common features of these solvents are that they have atoms containing unpaired electrons such as N, O, etc. In addition, it was thought that the high extract yields of solvents with a large and positive difference in the number of donors and acceptors may be related to the breaking of the cross-links in the lignites by the solvent.","PeriodicalId":216035,"journal":{"name":"Kafkas Üniversitesi Fen Bilimleri Enstitüsü Dergisi","volume":"46 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2023-10-12","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"135968749","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"“Examples” from the Perspective of Secondary School Mathematics Teacher Candidates","authors":"Sevilay ALKAN, Ebru SAKA","doi":"10.58688/kujs.1353948","DOIUrl":"https://doi.org/10.58688/kujs.1353948","url":null,"abstract":"Öğretim sürecinde kullanılan örneklerin seçimi birçok faktörün düşünülmesini gerektirdiği için öğretmeni karmaşık ve zor bir mücadele içine sürüklemektedir. Öğretmen adaylarının öğretmenlik eğitimi aldıkları süreçte örneklerin kullanımı ve türleri hakkında bilgi sahibi olmaları ve buna yönelik bir eğitim almaları onların gelecekte derslerinde kullanacakları örnekleri daha bilinçli seçmelerine yardımcı olacaktır. Bununla birlikte halen üniversitelerde öğrenim gören ilköğretim matematik öğretmeni adaylarının örnekler ile ilgili düşüncelerinin tespiti ile var olan bilgilerini ortaya çıkarmak, varsa kavram yanılgılarını tespit etmek ve buna yönelik çözüm önerileri geliştirmek önem arz etmektedir. Bu nedenle bu çalışmada ilköğretim matematik öğretmeni adaylarının örnek kavramı ile ilgili düşüncelerini tespit etmek amaçlanmıştır. Araştırmada nitel araştırma desenlerinden durum çalışması yöntemi kullanılmıştır. Araştırmanın katılımcılarını bir devlet üniversitesinin ilköğretim matematik öğretmenliği programı 2. sınıfında öğrenim görmekte olan 34 öğretmen adayı oluşturmaktadır. Araştırmanın verileri 2020-2021 akademik yılı bahar döneminde araştırmacılar tarafından hazırlanan yarı yapılandırılmış görüşme formu ile toplanmıştır. Elde edilen veriler içerik analizi tekniğinden yararlanılarak analiz edilmiştir. Araştırmanın sonucunda öğretmen adaylarının örnek kavramı hakkında yeterince bilgi sahibi olmadıkları belirlenmiştir. Katılımcıların, örneğin kullanım amaçları hakkında bilgilerinin kısmen olduğu fakat örneklerin çeşitleri hakkında yeterli bilgiye sahip olmadıkları tespit edilmiştir. Aynı zamanda öğretmen adaylarının büyük bir çoğunluğunun örnek ve soru kavramları arasındaki farkı bilmedikleri sonucuna ulaşılmıştır.","PeriodicalId":216035,"journal":{"name":"Kafkas Üniversitesi Fen Bilimleri Enstitüsü Dergisi","volume":"47 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2023-10-12","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"135923182","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"On the Properties of the Set of Trajectories of the Control System with Integrable Trajectories and Limited Control Resources","authors":"Anar HUSEYİN","doi":"10.58688/kujs.1289473","DOIUrl":"https://doi.org/10.58688/kujs.1289473","url":null,"abstract":"Bu çalışmada, davranışı Urysohn tür integral denklem ile verilen ve kontrol fonksiyonları üzerinde integral kısıt olan kontrol sistem incelenmektedir. Mümkün kontrol fonksiyonlar L_p (E;R^m ) (p>1) uzayının merkezi orijinde olan r yarıçaplı kapalı yuvarından seçilmektedir. Sistemin yörüngesi verilen denklemi hemen hemen her yerde sağlayan çok değişkenli integrallenebilir fonksiyon olarak tanımlanmaktadır. Yörüngeler kümesinin çapı için bir üst sınır elde edilmiş, yörüngeler kümesinin r ‘ye göre Lipschitz sürekli olduğu kanıtlanmıştır.","PeriodicalId":216035,"journal":{"name":"Kafkas Üniversitesi Fen Bilimleri Enstitüsü Dergisi","volume":"35 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2023-10-12","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"135923304","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Using the Linked List Algorithm to Create a Learning Environment for Online Students","authors":"Ramiz Salama","doi":"10.58688/kujs.1141734","DOIUrl":"https://doi.org/10.58688/kujs.1141734","url":null,"abstract":"College and university students have requirements to pass prior income degrees on Thursdays. Their time is equally split between art and responsibilities to their own family. It is crucial that students have the option of taking online courses and reading on their own schedule. At the same time, many public colleges are unable to accommodate all of the college students who want to wait for their classes on campus. This problem is described as one of the methods for learning the Data Structure path. It demonstrates how to use RAM Memory by putting data in it and showing how to use it.. Things also offers a video that explains it in a more understandable way. The number of students enrolling in educational institutions has increased significantly over the coming years, and the institutions providing superior training have indicated a strong preference to provide outstanding online MBA programs. It is unquestionably a website with a video demonstrating one of the intricate methods for quickly storing information in the computer's hard drive. Additionally, this website has a dedicated education page that sets it apart from other educational websites by making it easier to teach students how to solve any issues they might encounter while taking a physical lesson. The website offers advice on how to delete the listing from memory and utilize the pop returned method, pop the front approach, posh returned approach, and posh front approach.","PeriodicalId":216035,"journal":{"name":"Kafkas Üniversitesi Fen Bilimleri Enstitüsü Dergisi","volume":"11 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2023-03-31","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"121785254","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Analitik Fonksiyonların Belirli Bir Sınıfı İçin Fekete-Szegö Problemi Üzerine","authors":"Nizami Mustafa, Semra Korkmaz","doi":"10.58688/kujs.1233710","DOIUrl":"https://doi.org/10.58688/kujs.1233710","url":null,"abstract":"In this study, we introduce and examine a certain subclass of analytic functions in the open unit disk in the complex plane. Here, we give coefficient-bound estimates and investigate the Fekete-Szegö problem for this class. Some interesting special cases of the results obtained here are also discussed.","PeriodicalId":216035,"journal":{"name":"Kafkas Üniversitesi Fen Bilimleri Enstitüsü Dergisi","volume":"137 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2023-03-09","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"121911680","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Likenlerde Ağır Metal Alınma Mekanizmaları","authors":"Volkan Işık, Atila Yıldız","doi":"10.58688/kujs.1213902","DOIUrl":"https://doi.org/10.58688/kujs.1213902","url":null,"abstract":"Giderek sanayileşen dünyamızda, birçok canlıda olduğu gibi likenler de ağır metallere karşı savunmasız olduklarından yoğun biçimde ağır metallere maruz kalmaktadırlar. Bu çalışmanın amacı likenlerin ağır metallerin olumsuz etkilerine karşı nasıl tolerans oluşturduklarını, ağır metalleri kendi bünyelerine nasıl kattıklarını ve ağır metal alımı ile liken tallusu arasındaki ilişkileri incelemektir. Bu kapsamda likenlerin ağır metalleri nasıl biriktirdiğini ve liken metabolizmasının ağır metallere nasıl tepki verdiğini bilmek, biyoçeşitliliğin korunması için gereklidir. Ayrıca biyoizleme ve hatta biyojeokimyasal süreçlerin anlaşılması için de ipucu niteliğindedir. Yapılan biyoizleme çalışmalarının sonucu olarak liken tallusu içindeki ağır metal miktarı iklim, arazi örtüsü ve kirlilik kaynağına olan uzaklık ile ilişkilidir ve bu etmenler liken türlerinin dağılımını ve zenginliğini etkilemektedir. Likenler ağır metalleri absorblama yeteneklerinden dolayı çok iyi bir biyoindikatör özellik gösterirler. Likenlerin bu biyoindikatör özelliği şehir planlamasında, sanayi bölgelerinin oluşturulmasında, kirli alanların belirlenmesinde, atmosferik ağır metal kirliliğin tespitinde ve belirlenmesinde halk sağlığı için önemlidir.","PeriodicalId":216035,"journal":{"name":"Kafkas Üniversitesi Fen Bilimleri Enstitüsü Dergisi","volume":"99 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2023-02-14","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"115156109","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Optimization with Taguchi Method of Laser Parameters Necessary for Smooth Groove Bottom in ZAMAK 5","authors":"T. Canel, İ. Bağlan","doi":"10.58688/kujs.1204458","DOIUrl":"https://doi.org/10.58688/kujs.1204458","url":null,"abstract":"In this study, groove-shaped cavities were created with Nd: YAG laser on ZAMAK 5 plates, which have been used frequently in the industry for many years. The necessary laser parameters have been optimized so that the created cavity floor has a homogeneous depth. The effects of the beam diameter, laser energy, shielding gas type, and duration of the single pulse of Nd: YAG laser used on the roughness in the cavity were tried to be optimized. It was used for optimization. According to the ANOVA table, the optimum parameters are “580µm, 7J, Nitrogen, 7 ms for spot diameter of spot, the energy of single spot, type of ambient gas and a spot of single pulse respectively. The Taguchi method also indicates how effective the laser parameters used are in obtaining the desired surface. It has been concluded that the ambient gas used is the most important parameter in this study. The effect rate was obtained as 74.90 %. Then, laser spot diameter and pulse energy and lastly pulse duration are fewer effective parameters respectively.","PeriodicalId":216035,"journal":{"name":"Kafkas Üniversitesi Fen Bilimleri Enstitüsü Dergisi","volume":"26 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2023-01-20","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"131542135","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}