Pigment & Resin Technology最新文献

{"title":"On-site colorimetric determination of pH in brackish water aquaculture","authors":"Kesavan Devarayan, Deepika Anandakumar Muthurani, Geetha Kannusamy, Anand Theivasigamani, Yazhiniyan Palanisamy, Gangeswar Mohan, Monikandon Sukumaran, Evon Umesh Siluvai John, Ramar Marimuthu, Hema Anjappan","doi":"10.1108/prt-11-2023-0099","DOIUrl":"https://doi.org/10.1108/prt-11-2023-0099","url":null,"abstract":"<h3>Purpose</h3>\u0000<p>This study aims to describe on-site determination of pH in aquaculture using a portable colorimeter.</p><!--/ Abstract__block -->\u0000<h3>Design/methodology/approach</h3>\u0000<p>A basic and inexpensive portable colorimeter having light sources of different wavelength has been optimized for the determination of pH. A chromic reagent is optimized to develop colors depending on different pHs. Then, the color is measured using portable colorimeter in terms of resistance. Using the resistance to absorbance relationship, the resistance values are converted to absorbance. The performance of the developed colorimetric system is compared with commercially available colorimeter and pH meter. Eighty brackish water aquaculture samples were tested using the developed colorimetric system to check its adaptability in aquaculture farms.</p><!--/ Abstract__block -->\u0000<h3>Findings</h3>\u0000<p>A chromic reagent optimized in this study exhibited linear relationship with the pH changes of pH standards. Portable colorimeter having three different light sources is optimized using this chromic agent for determination of pH. Colorimeter possessing yellow light revealed more linear results than the others. The developed colorimetric system determines the pH of aquaculture water with an accuracy of ±0.14 in comparison with commercial colorimeter at the pH range of 6.0−9.0.</p><!--/ Abstract__block -->\u0000<h3>Originality/value</h3>\u0000<p>pH plays a pivotal role in aquaculture, impacting not only productivity but also profitability. The colorimetric system introduced in this research is promising for pH measurement in the field of brackish water aquaculture. The on-site pH assessment facilitated by this colorimetric system holds significant potential for adoption within the aquaculture sector, owing to its precision, portability, simplicity of use and user-friendly nature.</p><!--/ Abstract__block -->","PeriodicalId":20214,"journal":{"name":"Pigment & Resin Technology","volume":"21 1","pages":""},"PeriodicalIF":1.4,"publicationDate":"2024-05-21","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"141059963","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":4,"RegionCategory":"材料科学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Study on barrier properties, biodegradability and antimicrobial activity of linear low density polyethylene/starch blends","authors":"Emad S. Shafik, Mena Faheem, Marwa El-Sheikh, Amira Abdalla Abdelshafy Mohamed, Seham Samir Soliman","doi":"10.1108/prt-12-2023-0112","DOIUrl":"https://doi.org/10.1108/prt-12-2023-0112","url":null,"abstract":"<h3>Purpose</h3>\u0000<p>The present work aims to prepare biocomposites blend based on linear low density polyethylene/ starch without using harmful chemicals to improve the adhesion between two phases. Also, the efficiency of essential oils as green plasticizers and natural antimicrobial agents were evaluated.</p><!--/ Abstract__block -->\u0000<h3>Design/methodology/approach</h3>\u0000<p>Barrier properties and biodegradation behavior of linear low density polyethylene/starch (LLDPE/starch) blends plasticized with different essential oils including moringa oleifera and castor oils wereassessed as a comparison with traditional plasticizer such as glycerol. Biodegradation behavior forLLDPE/starch blends was monitored by soil burial test. The composted samples were recovered then washed followed by drying, and weighting samples after 30, 60, and 90 days to assess the change in weight loss. Also, mechanical properties including retention values of tensile strength and elongation at break were measured before and after composting. Furthermore, scanning electron microscope (SEM) was used to evaluate the change in the morphology of the polymeric blends. In addition to, the antimicrobial activity of plasticized LLDPE/starch blends films was evaluated using a standard plate counting technique.</p><!--/ Abstract__block -->\u0000<h3>Findings</h3>\u0000<p>The results illustrate that the water vapor transition rate increases from 2.5 g m⁻² 24 h⁻¹ for LLDPE/5starch to 4.21 g m⁻² 24 h⁻¹ and 4.43 g m⁻² 24 h⁻¹ for castor and moringa oleifera respectively. Also, the retained tensile strength values of all blends decrease gradually with increasing composting period. Unplasticized LLDPE/5starch showed highest tensile strength retention of 91.6% compared to the other blends that were 89.61, 88.49 and 86.91 for the plasticized LLDPE/5starch with glycerol, castor and M. oleifera oils respectively. As well as, the presence of essential oils in LLDPE/ starch blends increase the inhibition growth of escherichia coli, candida albicans and staphylococcus aureus.</p><!--/ Abstract__block -->\u0000<h3>Originality/value</h3>\u0000<p>The objective of this work is to develop cost-effective and environmentally-friendly methods for preparing biodegradable polymers suitable for packaging applications.</p><!--/ Abstract__block -->","PeriodicalId":20214,"journal":{"name":"Pigment & Resin Technology","volume":"59 1","pages":""},"PeriodicalIF":1.4,"publicationDate":"2024-05-13","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"140926728","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":4,"RegionCategory":"材料科学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"A comparative and experimental study to evaluate the use of nanocontainer solutions for removing polymeric coatingsfrom glass artifacts","authors":"Rania Abdel Gwad Eloriby, Wael Sabry Mohamed, Hamdy Mohamed Mohamed","doi":"10.1108/prt-02-2024-0016","DOIUrl":"https://doi.org/10.1108/prt-02-2024-0016","url":null,"abstract":"<h3>Purpose</h3>\u0000<p>The purpose of this study is to evaluate the effectiveness of nanocontainer solutions in removing deteriorated and aged polymers commonly used in coating and consolidating archaeological glass.</p><!--/ Abstract__block -->\u0000<h3>Design/methodology/approach</h3>\u0000<p>This study focused on characterizing glass surfaces coated with two commonly used polymeric materials in archaeological glass preservation. Furthermore, the study evaluates the elimination of these coatings from the surfaces by using innovative aqueous systems composed of micellar solutions (MS) and oil-in-water (O/W) Texapon-P microemulsions (TEX). Glass samples coated with selected polymers were subjected to thermal and photochemical aging to simulate natural degradation conditions. This study aimed to evaluate the effectiveness of nanocontainer aqueous systems compared to acetone (Ac), a conventional solvent commonly used for removal procedures. The characterization procedures involved transmission electron microscopy, USB digital microscopy, scanning electron microscopy, color alteration and gravimetric measurement.</p><!--/ Abstract__block -->\u0000<h3>Findings</h3>\u0000<p>The findings indicate that the effectiveness of novel techniques using aqueous nanocontainer systems is quite promising when considering a “green approach” to preserving cultural heritage. Microscopic examination demonstrated the efficacy of MS in effectively removing acrylic and vinyl polymers from the glass surface. Furthermore, TEX proved effective in removing polyvinyl acetate (PVA) over Paraloid B72 (B-72). In addition, the measurement of color alteration values revealed a decrease after using MS compared to the standard sample before applying the polymers, with values of Δ<em>E</em> = 1.48 and 1.82 for B-72 polymer and PVA, respectively.</p><!--/ Abstract__block -->\u0000<h3>Originality/value</h3>\u0000<p>This research provides nanocontainer solutions for removing aged polymers from the glass surface. This makes the current study a promising step for treating archaeological glass.</p><!--/ Abstract__block -->","PeriodicalId":20214,"journal":{"name":"Pigment & Resin Technology","volume":"28 1","pages":""},"PeriodicalIF":1.4,"publicationDate":"2024-05-13","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"140926829","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":4,"RegionCategory":"材料科学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"A wide range of modified alkyd resins based on a new source of dicarboxylic acid as a binder for anticorrosive paint","authors":"Hossa F. Al-Shareef, Ahmed M. Yousif, Rafaat Eleisawy, Ammar M. Mahmoud, Hamada Abdelwahab","doi":"10.1108/prt-01-2024-0010","DOIUrl":"https://doi.org/10.1108/prt-01-2024-0010","url":null,"abstract":"<h3>Purpose</h3>\u0000<p>This paper aims to prepare alkyd protective paint by using modified alkyd with 3,6-dichloro benzo[b]thiophene-2-carbonyl glutamic acid (DCBTGA) as a source of dicarboxylic acid and evaluating their anticorrosive properties compared with those of unmodified alkyd coatings for steel protection.</p><!--/ Abstract__block -->\u0000<h3>Design/methodology/approach</h3>\u0000<p>Short, medium and long oil alkyds, which represented as (0, 10, 20 and 30% excess-OH) according to the resin constants (Patton, 1962), were prepared through a condensation polymerization reaction via a solvent process in a one-step reaction. The modification of alkyd was carried out by using DCBTGA as a source of dicarboxylic acid. The prepared modified alkyd was confirmed by IR and NMR spectral analysis. The physicochemical, mechanical and anticorrosion performance properties of the considered modified coating formulations against unmodified blank coating were studied to confirm their application efficiency.</p><!--/ Abstract__block -->\u0000<h3>Findings</h3>\u0000<p>The best results in terms of physicochemical, mechanical and anticorrosion performance properties were found according to the following of this order activity: 30 replacements of the modifier (DCBTGA) for each hydroxyl continent were 30% Ex-OH &gt; 20% Ex-OH &gt; 10% Ex-OH &gt; 0% Ex-OH, compared with that formulation containing unmodified alkyd, especially with increasing the modifier percent.</p><!--/ Abstract__block -->\u0000<h3>Originality/value</h3>\u0000<p>The prepared DCBTGA-modified resins can be used for different applications based on the type of alkyd and application.</p><!--/ Abstract__block -->","PeriodicalId":20214,"journal":{"name":"Pigment & Resin Technology","volume":"13 1","pages":""},"PeriodicalIF":1.4,"publicationDate":"2024-05-08","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"140882715","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":4,"RegionCategory":"材料科学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Superhydrophobic coatings prepared from fluorinated silica nanoparticles and fluororesin: wetability, chemical stability, mechanical durability and water repellency","authors":"Pingping Hou, Zheng Qian, Meng Xin Hu, Ji Qi Liu, Jun Zhang, Wei Zhao, Xiao Li, Yong Wang, HongYan Huang, Qian Ping Ran","doi":"10.1108/prt-01-2024-0006","DOIUrl":"https://doi.org/10.1108/prt-01-2024-0006","url":null,"abstract":"<h3>Purpose</h3>\u0000<p>The purpose of this study is to explore the interfacial adhesion between superhydrophobic coatings FC-X (X = 1%, 2%, 3%, 4% and 5%) and the concrete substrate, along with the impact of FC-X on the water repellency characteristics of the concrete substrate.</p><!--/ Abstract__block -->\u0000<h3>Design/methodology/approach</h3>\u0000<p>One synthetic step was adopted to prepare novel F-SiO₂ NP hybrid fluororesin coating. The impact of varying mass fractions of F-SiO₂ NPs on the superhydrophobicity of FC-X was analyzed and subsequently confirmed through water contact angle (WCA) measurements. Superhydrophobic coatings were simply applied to the concrete substrate using a one-step spraying method. The interfacial adhesion between FC-X and the concrete substrate was analyzed using tape pasting tests and abrasion resistance measurements. The influence of FC-X on the water repellency of the concrete substrate was investigated through measurements of water absorption, impermeability and electric flux.</p><!--/ Abstract__block -->\u0000<h3>Findings</h3>\u0000<p>FC-4% exhibits excellent superhydrophobicity, with a WCA of 157.5° and a sliding angle of 2.3°. Compared to control sample, FC-X exhibits better properties, including chemical durability, wear resistance, adhesion strength, abrasion resistance, water resistance and impermeability.</p><!--/ Abstract__block -->\u0000<h3>Practical implications</h3>\u0000<p>This study offers a thorough investigation into the practical implications of enhancing the durability and water repellency of concrete substrates by using superhydrophobic coatings, particularly FC-4%, which demonstrates exceptional superhydrophobicity alongside remarkable chemical durability, wear resistance, adhesion strength, abrasion resistance, water resistance and impermeability.</p><!--/ Abstract__block -->\u0000<h3>Originality/value</h3>\u0000<p>Through the examination of the interfacial adhesion between FC-X and the concrete substrate, along with an assessment of FC-X’s impact on the water repellency of the concrete, this paper provides valuable insights into the practical application of superhydrophobic coatings in enhancing the durability and performance of concrete materials.</p><!--/ Abstract__block -->","PeriodicalId":20214,"journal":{"name":"Pigment & Resin Technology","volume":"150 1","pages":""},"PeriodicalIF":1.4,"publicationDate":"2024-05-07","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"140887564","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":4,"RegionCategory":"材料科学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Macro-micro correlation analysis of rheological characteristics for composite modified asphalt","authors":"Shuang Huang, Haitao Zhang, Tengjiang Yu","doi":"10.1108/prt-12-2023-0118","DOIUrl":"https://doi.org/10.1108/prt-12-2023-0118","url":null,"abstract":"<h3>Purpose</h3>\u0000<p>This study aims to investigate the micro mechanism of macro rheological characteristics for composite modified asphalt.Grey relational analysis (GRA) was used to analyze the correlation between macro rheological indexes and micro infrared spectroscopy indexes.</p><!--/ Abstract__block -->\u0000<h3>Design/methodology/approach</h3>\u0000<p>First, a dynamic shear rheometer and a bending beam rheometer were used to obtain the evaluation indexes of high- and low-temperature rheological characteristics for asphalt (virgin, SBS/styrene butadiene rubber [SBR], SBS/rubber and SBR/rubber) respectively, and its variation rules were analyzed. Subsequently, the infrared spectroscopy test was used to obtain the micro rheological characteristics of asphalt, which were qualitatively and quantitatively analyzed, and its variation rules were analyzed. Finally, with the help of GRA, the macro-micro evaluation indexes were correlated, and the improvement efficiency of composite modifiers on asphalt was explored from rheological characteristics.</p><!--/ Abstract__block -->\u0000<h3>Findings</h3>\u0000<p>It was found that the deformation resistance and aging resistance of SBS/rubber composite modified asphalt are relatively good, and the modification effect of composite modifier and virgin asphalt is realized through physical combination, and the rheological characteristics change with the accumulation of functional groups. The correlation between macro rutting factor and micro functional group index is high, and the relationship between macro Burgers model parameters and micro functional group index is also close.</p><!--/ Abstract__block -->\u0000<h3>Originality/value</h3>\u0000<p>Results reveal the basic principle of inherent-improved synergistic effect for composite modifiers on asphalt and provide a theoretical basis for improving the composite modified asphalt.</p><!--/ Abstract__block -->","PeriodicalId":20214,"journal":{"name":"Pigment & Resin Technology","volume":"13 1","pages":""},"PeriodicalIF":1.4,"publicationDate":"2024-04-30","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"140812214","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":4,"RegionCategory":"材料科学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Exploring the utilities of rice straw black liquor (Part X): biomass-derived copper (lignin/silica/fatty acids) complex as a natural antioxidant for EPDM composites (Part V)","authors":"Hoda Sabry Sabry Othman, Salwa H. El-Sabbagh, Galal A. Nawwar","doi":"10.1108/prt-07-2023-0059","DOIUrl":"https://doi.org/10.1108/prt-07-2023-0059","url":null,"abstract":"<h3>Purpose</h3>\u0000<p>This study aims to investigate the behavior of the green biomass-derived copper (lignin/silica/fatty acids) complex, copper lignin/silica/fatty acids (Cu-LSF) complex, when incorporated into the nonpolar ethylene propylene diene (EPDFM) rubber matrix, focusing on its reinforcing and antioxidant effect on the resulting EPDM composites.</p><!--/ Abstract__block -->\u0000<h3>Design/methodology/approach</h3>\u0000<p>The structure of the prepared EPDM composites was confirmed by Fourier-transform infrared spectroscopy, and the dispersion of the additive fillers and antioxidants in the EPDM matrix was investigated using scanning electron microscopy. Also, the rheometric characteristics, mechanical properties, swelling behavior and thermal gravimetric analysis of all the prepared EPDM composites were explored as well.</p><!--/ Abstract__block -->\u0000<h3>Findings</h3>\u0000<p>Results revealed that the Cu-LSF complex dispersed well in the nonpolar EPDM rubber matrix, in thepresence of coupling system, with enhanced Cu-LSF-rubber interactions and increased cross-linking density, which reflected on the improved rheological and mechanical properties of the resulting EPDM composites. From the various investigations performed in the current study, the authors can suggest 7–11 phr is the optimal effective concentration of Cu-LSF complex loading. Interestingly, EPDM composites containing Cu-LSF complex showed better antiaging performance, thermal stability and fluid resistance, when compared with those containing the commercial antioxidants (2,2,4-trimethyl-1,2-dihydroquinoline and N-isopropyl-N’-phenyl-p-phenylenediamine). These findings are in good agreement with our previous study on polar nitrile butadiene rubber.</p><!--/ Abstract__block -->\u0000<h3>Originality/value</h3>\u0000<p>The current study suggests the green biomass-derived Cu-LSF complex to be a promising low-cost and environmentally safe alternative filler and antioxidant to the hazardous commercial ones.</p><!--/ Abstract__block -->","PeriodicalId":20214,"journal":{"name":"Pigment & Resin Technology","volume":"1 1","pages":""},"PeriodicalIF":1.4,"publicationDate":"2024-04-19","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"140615268","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":4,"RegionCategory":"材料科学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Investigation of process parameters for eco-friendly indigo dyeing of cotton fabric with reducing sugars","authors":"Quratulain Mohtashim, Salma Farooq, Fareha Asim","doi":"10.1108/prt-07-2023-0068","DOIUrl":"https://doi.org/10.1108/prt-07-2023-0068","url":null,"abstract":"<h3>Purpose</h3>\u0000<p>The application of indigo dyes in the denim industries has been criticised due to the introduction of non-renewable oxidation products into the environment. Previous studies have investigated that reducing sugars can be used as green alternatives to sodium dithionite in the indigo dyeing of cotton fabric owing to their reduced and stable redox potential in the dye bath. The purpose of this study was to dye denim cotton fabric with indigo dye using various reducing sugars and alkalis. The use of sucrose and potassium hydroxide (KOH) for indigo dyeing has been explored for the first time.</p><!--/ Abstract__block -->\u0000<h3>Design/methodology/approach</h3>\u0000<p>A mixed factorial design with four variables including alkali, pH, number of dips and type of reducing sugar at different levels was studied to identify a significant correlation between the effect of these variables on the colour strength and fastness properties of the dyeings.</p><!--/ Abstract__block -->\u0000<h3>Findings</h3>\u0000<p>Investigations were made to examine the significant factors and interactions of the selected responses in the eco-friendly dyeing method. This process has the potential to reduce the load of sulphite and sulphate generated in the dyebath due to the use of a conventional reducing agent, sodium dithionite. The colour strength of the dyeing reduced with fructose was found to be better than other reducing sugars and significantly influenced by the number of dips, pH levels and the interaction between pH and reducing sugars. Using fructose for indigo dyeing with two dips at a pH of 11.5, using KOH as an alkali, results in higher colour strength values. The fastness properties of the indigo-dyed sample with reducing sugars ranging from fair to good or good to excellent. Specifically, colour change receives a rating of grey scale 3–4, staining 4–5, dry rubbing 4 and light fastness 3–4. These assessments hold true across various factors such as the type of reducing sugar, alkali, pH and the number of dips. The optimised parameters leading to improved colour strength and fastness properties are also discussed.</p><!--/ Abstract__block -->\u0000<h3>Originality/value</h3>\u0000<p>This dyeing technique is novel and a green alternative to dithionite denim dyeing. This process is found to be useful for indigo dyeing of denim fabric leading to reduced and stable redox potential in the dyebath and acceptable colour strength of the dyed fabric.</p><!--/ Abstract__block -->","PeriodicalId":20214,"journal":{"name":"Pigment & Resin Technology","volume":"19 1","pages":""},"PeriodicalIF":1.4,"publicationDate":"2024-04-17","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"140575513","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":4,"RegionCategory":"材料科学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Innovations in prosthetic foot design enhancing durability, functionality and comfort through PLA composite filament 3D printing","authors":"Lara E. Yousif, Mayyadah S. Abed, Aseel B. Al-Zubidi, Kadhim K. Resan","doi":"10.1108/prt-10-2023-0092","DOIUrl":"https://doi.org/10.1108/prt-10-2023-0092","url":null,"abstract":"<h3>Purpose</h3>\u0000<p>The number of people with special needs, including citizens and military personnel, has increased as a result of terrorist attacks and challenging conditions in Iraq and other countries. With almost 80% of the world’s amputees having below-the-knee amputations, Iraq has become a global leader in the population of amputees. Important components found in lower limb prostheses include the socket, pylon (shank), prosthetic foot and connections.</p><!--/ Abstract__block -->\u0000<h3>Design/methodology/approach</h3>\u0000<p>There are two types of prosthetic feet: articulated and nonarticulated. The solid ankle cushion heel foot is the nonarticulated foot that is most frequently used. The goal of this study is to use a composite filament to create a revolutionary prosthetic foot that will last longer, have better dorsiflexion and be more stable and comfortable for the user. The current study, in addition to pure polylactic acid (PLA) filament, 3D prints test items using a variety of composite filaments, such as PLA/wood, PLA/carbon fiber and PLA/marble, to accomplish this goal. The experimental step entails mechanical testing of the samples, which includes tensile testing and hardness evaluation, and material characterization by scanning electron microscopy-energy dispersive spectrometer analysis. The study also presents a novel design for the nonarticulated foot that was produced with SOLIDWORKS and put through ANSYS analysis. Three types of feet are produced using PLA, PLA/marble and carbon-covered PLA/marble materials. Furthermore, the manufactured prosthetic foot undergoes testing for dorsiflexion and fatigue.</p><!--/ Abstract__block -->\u0000<h3>Findings</h3>\u0000<p>The findings reveal that the newly designed prosthetic foot using carbon fiber-covered PLA/marble material surpasses the PLA and PLA/marble foot in terms of performance, cost-effectiveness and weight.</p><!--/ Abstract__block -->\u0000<h3>Originality/value</h3>\u0000<p>To the best of the author’s knowledge, this is the first study to use composite filaments not previously used, such as PLA/wood, PLA/carbon fiber and PLA/marble, to design and produce a new prosthetic foot with a longer lifespan, improved dorsiflexion, greater stability and enhanced comfort for the patient. Beside the experimental work, a numerical technique specifically the finite element method, is used to assess the mechanical behavior of the newly designed foot structure.</p><!--/ Abstract__block -->","PeriodicalId":20214,"journal":{"name":"Pigment & Resin Technology","volume":"296 1","pages":""},"PeriodicalIF":1.4,"publicationDate":"2024-04-12","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"140575518","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":4,"RegionCategory":"材料科学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"In-situ synthesis of SiO2 aerogel/polyethylene terephthalate composite slices and their fibers","authors":"Fukang Yang, Wenjun Wang, Yongjie Yan, YuBing Dong","doi":"10.1108/prt-12-2023-0117","DOIUrl":"https://doi.org/10.1108/prt-12-2023-0117","url":null,"abstract":"<h3>Purpose</h3>\u0000<p>Polyethylene terephthalate (PET) as a fiber molding polymer is widely used in aerospace, electrical and electronic, clothing and other fields. The purpose of this study is to improve the thermal insulation performance of polyethylene terephthalate (PET), the SiO₂ aerogel/PET composites slices and fibers were prepared, and the effects of the SiO₂ aerogel on the morphology, structure, crystallization property and thermal conductivity of the SiO₂ aerogel/PET composites slices and their fibers were systematically investigated.</p><!--/ Abstract__block -->\u0000<h3>Design/methodology/approach</h3>\u0000<p>The mass ratio of purified terephthalic acid and ethylene glycol was selected as 1:1.5, which was premixed with Sb₂O₃ and the corresponding mass of SiO₂ aerogel, and SiO₂ aerogel/PET composites were prepared by direct esterification and in-situ polymerization. The SiO₂ aerogel/PET composite fibers were prepared by melt-spinning method.</p><!--/ Abstract__block -->\u0000<h3>Findings</h3>\u0000<p>The results showed that the SiO₂ aerogel was uniformly dispersed in the PET matrix. The thermal insulation coefficient of PET was significantly reduced by the addition of SiO₂ aerogel, and the thermal conductivity of the 1.0 Wt.% SiO₂ aerogel/PET composites was reduced by 75.74 mW/(m · K) compared to the pure PET. The thermal conductivity of the 0.8 Wt.% SiO₂ aerogel/PET composite fiber was reduced by 46.06% compared to the pure PET fiber. The crystallinity and flame-retardant coefficient of the SiO₂ aerogel/PET composite fibers showed an increasing trend with the addition of SiO₂ aerogel.</p><!--/ Abstract__block -->\u0000<h3>Research limitations/implications</h3>\u0000<p>The SiO₂ aerogel/PET composite slices and their fibers have good thermal insulation properties and exhibit good potential for application in the field of thermal insulation, such as warm clothes. In today’s society where the energy crisis is becoming increasingly serious, improving the thermal insulation performance of PET to reduce energy loss will be of great significance to alleviate the energy crisis.</p><!--/ Abstract__block -->\u0000<h3>Originality/value</h3>\u0000<p>In this study, SiO₂ aerogel/PET composite slices and their fibers were prepared by an <em>in situ</em> polymerization process, which solved the problem of difficult dispersion of nanoparticles in the matrix and the thermal conductivity of PET significantly reduced.</p><!--/ Abstract__block -->","PeriodicalId":20214,"journal":{"name":"Pigment & Resin Technology","volume":"102 1","pages":""},"PeriodicalIF":1.4,"publicationDate":"2024-04-08","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"140575511","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":4,"RegionCategory":"材料科学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}