{"title":"Research on the Forecast of Cultivated Land Variation Trend in Rapidly Urbanization Area: A Case Study of Wujiang City","authors":"Q. Li, Xu Yannan, Wang Xi","doi":"10.1109/ICIC.2010.54","DOIUrl":"https://doi.org/10.1109/ICIC.2010.54","url":null,"abstract":"The city of Wujiang, which locates at the center of the Yangtze River delta, is a relatively ideal case for study because it is a typical area that experiences the rapid urbanization. According to the statistical and survey data at county level during the past 20 years, this article establishes a predicting model by comprehensively using both PCA and BP neural networks. Principal component analysis is firstly used to preprocess input variables in order to raise the network’s operational efficiency. While establishing the model of BP neural networks, it uses the data from 1990-2004 as the learning samples and that from 2005-2007 as the testing samples. The results show that the relative errors between the predicted value and the actual value are all less than 1.15%, which indicates that the neural network technique has a big power in the study of forecasting of cultivated area and the train of thought is reasonable. Finally the model established is used to do the simulated predication of the cultivated area for the year of 2010 in Wujiang, and the result shows that under the guidance of current policy, the decreasing rate of the cultivated area in the city of Wujiang dramatically drops.","PeriodicalId":176212,"journal":{"name":"2010 Third International Conference on Information and Computing","volume":"12 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2010-06-04","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"132207701","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Simulation of Tail-slap Loads of Supercavitating Projectiles","authors":"Jia-zhong Zhang, Jin-Sheng Zhang, Yingjie Wei","doi":"10.1109/ICIC.2010.135","DOIUrl":"https://doi.org/10.1109/ICIC.2010.135","url":null,"abstract":"To investigate the tail-slap loads on supercavitating projectiles, a simple model for cavity-fluid region is presented based on Logvinovich’s Principle. And a series of simulations of fluid - structure interaction (FSI) were done to determine the effects of the slenderness ratio of projectiles on the tail-slap loads. The results show that the impact duration increases as the slenderness ratio increases and the frequency of impacts decrease as the slenderness ratio increases. The larger the slenderness ratio is, the more obviously the body’s flexibility and vibration influent the slapping force. The results developed in this paper will provide reference for the structural dynamics research and optimization design of the supercavitating projectiles.","PeriodicalId":176212,"journal":{"name":"2010 Third International Conference on Information and Computing","volume":"2 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2010-06-04","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"129962208","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Multi-objective Optimization Design of Automobile Suspension Helical Spring","authors":"Qin-man Fan, Yong-hai Wu, Luan Kun, Wang Feng","doi":"10.1109/ICIC.2010.62","DOIUrl":"https://doi.org/10.1109/ICIC.2010.62","url":null,"abstract":"The quality of suspension helical spring is very important to the stationarity and safety of automobile. Taking the automobile suspension helical spring as the research object, by using Pareto optimization theory and particle swarm optimization algorithm, the paper establishes a multi-objective optimization model of automobile suspension helical spring which is based on the Matlab optimization design platform. The purpose is to seek for the optimal structure design proposal which is under the objective of maximum natural frequency and minimum quality of spring. The Pareto optimal solution set is obtained.","PeriodicalId":176212,"journal":{"name":"2010 Third International Conference on Information and Computing","volume":"37 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2010-06-04","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"132966944","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Design and Implementation of Remote Monitoring and Control System for Freight Train Load Testing","authors":"Guozheng Li, Nanlin Tan","doi":"10.1109/ICIC.2010.36","DOIUrl":"https://doi.org/10.1109/ICIC.2010.36","url":null,"abstract":"The key technology of the fatigue reliability design and test evaluation of freight train is to establish freight train load spectrum based on operating conditions. Design a set of remote monitoring and control system for the establishment of loading spectrum's actual needs. The system uses GPS technology for vehicle location, speed and other information, through the GPRS technology to build car-side with the ground control center of the interaction channel. Using the ARM7 microprocessors, transplant embedded μC/OS-II operating system, realized the hardware management and task scheduling. The system can achieve vehicle-side with the ground control center data exchange. Through the ground control center monitoring software running real-time get the vehicles and the test equipment status, timely adjustment of test equipment. At the same time enables automatic vehicle equipment. The system basically meet the needs of the overloaded train load test research requirements can be a steady, accurate and complete remote monitoring and control functions.","PeriodicalId":176212,"journal":{"name":"2010 Third International Conference on Information and Computing","volume":"1 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2010-06-04","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"129386289","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Lv Xiang-Feng, Pan Yi-shan, Liu Jian-jun, Tang Ju-peng
{"title":"Experimental Study on Effect of Three-dimensional Stresses on Permeability of Coalbed Gas-water Double State Flow","authors":"Lv Xiang-Feng, Pan Yi-shan, Liu Jian-jun, Tang Ju-peng","doi":"10.1109/ICIC.2010.308","DOIUrl":"https://doi.org/10.1109/ICIC.2010.308","url":null,"abstract":"The absolute permeability of coal, relative permeability of gas-water are necessary parameters to forecasting the birth rate of coalbed methane and water in mining. Taking Tiandiwangpo Mine in Jincheng for example, using steady-state method, the experiment of absolute permeability of coal, relative permeability of gas-water double state flow in the coalbed methane(CBM) reservoir were simulated under the condition of changing load and pore pressure. The relative permeability curves of coalbed gas-water were obtained. The relationship between effective stress and effective permeability of gas and water were studied. Some new laws are presented as follows: (1)with the increasing of confining pressure, the relative permeability of gas-water are increased slightly, it is proved that confining pressure has a great effect on the absolute permeability of coal, (2)a lower critical value of effective stress exists, the effective permeability of gas and water will decrease rapidly with the increase of effective stress when it is smaller than it. For the coal sample No.3, the lower critical effective stress is about 2.7MPa, (3) On the other hand, a upper critical value of effective stress is found, the effective permeability of gas and water will decrease slightly with the increase of effective stress when it is bigger than it. For the coal sample No.3, the upper critical effective stress is about 8.5MPa, (4) along with the increasing of the pore and the cranny, the effective permeability of gas and water increased as the pore pressure increased. The relational expressions for effective stress and the effective permeability of water and gas were studied. The experimental results can provide a theoretical basis for reasonable drainage of coalbed methane(CBM).","PeriodicalId":176212,"journal":{"name":"2010 Third International Conference on Information and Computing","volume":"3 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2010-06-04","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"126592022","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Existence of Multiple Periodic Solution of a Predator-Prey System with Infinite Delay","authors":"Pan Gao, Rong Cheng","doi":"10.1109/ICIC.2010.26","DOIUrl":"https://doi.org/10.1109/ICIC.2010.26","url":null,"abstract":"In this paper, we study the existence of positive periodic solutions for a predator-prey system with infinite delay and non-monotonic functional response. Two bounded open sets are obtained by using analytic technique. By means of the continuation theorem based on coincidence degree theory, a set of sufficient conditions for this system to have at least two positive periodic solutions is obtained.","PeriodicalId":176212,"journal":{"name":"2010 Third International Conference on Information and Computing","volume":"1 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2010-06-04","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"130806690","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"An Optimized Fourth Order Runge-Kutta Method","authors":"Xiong You, Xinmeng Yao, Xin Shu","doi":"10.1109/ICIC.2010.195","DOIUrl":"https://doi.org/10.1109/ICIC.2010.195","url":null,"abstract":"In this paper the order conditions for Runge-Kutta methods are presented based on Butcher's rooted tree theory. A new Runge-Kutta method of order four (MINRK4) is obtained by means of minimizing the error constant. The results of numerical experiments show the competence of the new method in accuracy and efficiency compared with some highly efficient codes in the literature.","PeriodicalId":176212,"journal":{"name":"2010 Third International Conference on Information and Computing","volume":"98 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2010-06-04","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"130740252","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Study on Settlement Time Property of Composite Foundation","authors":"Jiang Long, Yang Hui","doi":"10.1109/ICIC.2010.109","DOIUrl":"https://doi.org/10.1109/ICIC.2010.109","url":null,"abstract":"In order to provide the basis for design and construction of CFG pile, as well as to promote the foundation treatment, settlement time property of composite foundation is studied by means of 3-D numerical simulation methods considering Biot consolidation theory. The results prove that: ??? 3-D numerical simulation considering Biot consolidation theory can well study settlement time property of composite foundation, ??? increasing pile length, pile diameter, permeability of soil and surcharge preloading, and reducing pile space and compressibility of soil, is advantageous to dissipation of excess pore water pressure and shortens consolidation time and the effect of increasing permeability of soil is the most remarkable, ??? increasing pile length, pile diameter and surcharge preloading, and reducing pile space and compressibility of soil, is helpful for controlling settlement deformation and the effect of increasing pile length is the most remarkable, ??? design ideas of sparse-density pile are brought out and the main factors for settlement are surcharge preloading and pile length.","PeriodicalId":176212,"journal":{"name":"2010 Third International Conference on Information and Computing","volume":"1 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2010-06-04","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"131090380","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Design of a PKI-Based Secure Architecture for Mobile E-Commerce","authors":"Wu Yanyan","doi":"10.1109/ICIC.2010.31","DOIUrl":"https://doi.org/10.1109/ICIC.2010.31","url":null,"abstract":"The development of mobile devices and the public key infrastructure???PKI???have improved the rapid development of mobile e-commerce. However, there exits some challenges such as limit computing capacity for PKI-based secure transactions. This paper presents a new system architecture which includes client, mobile operator, service provider, certificate authority and so on. On this basis, the protocols for authentication and key exchange that is suitable for the mobile e-commerce environment are designed to support some applications.","PeriodicalId":176212,"journal":{"name":"2010 Third International Conference on Information and Computing","volume":"62 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2010-06-04","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"133189028","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Research of Autocontrol System with Variable Speed for Hydraulic Log-core Veneer Lathe Based on Single-chip Computer","authors":"Guang-ming Xiong, Xia Lu","doi":"10.1109/ICIC.2010.193","DOIUrl":"https://doi.org/10.1109/ICIC.2010.193","url":null,"abstract":"The mathematical model between the knife-carriage feeding speed and the diameter of the log is established. An automatic control system of hydraulic log-core veneer lathe based on C8051F020 is studied in this paper, C8051F020 is used to control the hydraulic system feeding. The displacement sensor is used to measure and feed back the diameter of the log, the control system automatically regulates the feed-in flow of the hydraulic system through the solenoid-operated proportional flow valve, the cutter is continuously feeding with variable speed. The result shows that the precision of the working veneer, the working efficiency and the lifetime of the Log-core veneer Lathe can be highly improved.","PeriodicalId":176212,"journal":{"name":"2010 Third International Conference on Information and Computing","volume":"15 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2010-06-04","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"114414257","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}