International Journal of Mechanical Engineering Technologies and Applications最新文献_第6页

Influence of Mixture Composition Between Soybean Oil and Diesel Fuel on Characteristic of Droplets Combustion 大豆油与柴油混合成分对液滴燃烧特性的影响

International Journal of Mechanical Engineering Technologies and Applications Pub Date : 2022-01-28 DOI: 10.21776/mechta.2022.003.01.7

R. Subagyo, P. R. Ansyah, Robbi Sholaiman Aminanto

引用次数: 0

Analysis on Nylon 6/6 Camshaft Gear Temperature Simulation In A 1.1 Kva Elepaq Generator Using Inventor and ANSYS 基于Inventor和ANSYS的1.1 Kva发电机尼龙6/6凸轮轴齿轮温度仿真分析

International Journal of Mechanical Engineering Technologies and Applications Pub Date : 2021-07-02 DOI: 10.21776/MECHTA.2021.002.02.10

Olalekan Sanni, S. Oke

{"title":"Analysis on Nylon 6/6 Camshaft Gear Temperature Simulation In A 1.1 Kva Elepaq Generator Using Inventor and ANSYS","authors":"Olalekan Sanni, S. Oke","doi":"10.21776/MECHTA.2021.002.02.10","DOIUrl":"https://doi.org/10.21776/MECHTA.2021.002.02.10","url":null,"abstract":"Camshaft gear temperature simulations are presently crucial as they offer a distinctive visual account of the temperature profile within the generator, they permit superior manufacturing assessment and the design of heat-resistant camshaft gear with high performance and low cost. However, available information to designers is inadequate as they omit the approximate global maximum temperature, particularly for the nylon 6/6 camshaft gear in a 1.1 kVA elepaq generator. In this article, the idea is to simulate and account for the global minimum and maximum temperature using the Inventor and ANSYS software. The stress-induced on the generator was considered. The results of the simulation revealed an approximate global maximum temperature of the nylon 6/6 camshaft gear as 37°C max with 22°C min. Furthermore, the global minimum at 35°C max with 21°C min was considered. Besides, the structural steel global maximum of 38°C max, 25°C min and global minimum 35°C max, 24°C min. The stress values did not exceed 0.1419 MPa on ANSYS but the ANSYS revealed that the camshaft gear strain was within safe limits. The simulation approach predicts the minimum and maximum temperature of the nylon 6/6 camshaft gear and the stress and strain values. The utility of this attempt is to help designers to implement effective decisions on material choice and design parameters for optimisation, performance and low-cost design.","PeriodicalId":159477,"journal":{"name":"International Journal of Mechanical Engineering Technologies and Applications","volume":"43 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2021-07-02","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"115483583","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

引用次数: 0

Effect of Biodiesel B100 and Ethanol Blends on the Performance of Small Diesel Engine B100生物柴油与乙醇混合燃料对小型柴油机性能的影响

International Journal of Mechanical Engineering Technologies and Applications Pub Date : 2021-07-02 DOI: 10.21776/MECHTA.2021.002.02.3

Alfian Firdiansyah, N. Ilminnafik, A. Triono, M. N. Kustanto

引用次数: 0

Key Performance Indicators Analysis for Quay Container Crane Performance Assessment (Case Study at Jakarta International Container Terminal) 码头集装箱起重机性能评估关键绩效指标分析(以雅加达国际集装箱码头为例)

International Journal of Mechanical Engineering Technologies and Applications Pub Date : 2021-07-02 DOI: 10.21776/MECHTA.2021.002.02.5

Mufti Imam Pekih, A. Sembiring, S. Santoso

{"title":"Key Performance Indicators Analysis for Quay Container Crane Performance Assessment (Case Study at Jakarta International Container Terminal)","authors":"Mufti Imam Pekih, A. Sembiring, S. Santoso","doi":"10.21776/MECHTA.2021.002.02.5","DOIUrl":"https://doi.org/10.21776/MECHTA.2021.002.02.5","url":null,"abstract":"PT Jakarta International Container Terminal (JICT) is the largest container port in Indonesia. Currently, JICT capacity is 2.5 million TEUs (Twenty-foot Equivalent Units) per year, it continues to strive to improve international services and is supported by adequate container loading and unloading equipment. The requirement to establish common standards in different types of container port equipment and identify performance indicators to assess the performance of container handling equipment has increased. Although the Quay Container Crane (QCC) operating system may be different at each container terminal, there are similarities in its main movements, namely: Main Hoist, Trolley, Gantry, and Boom. By knowing the clock metric for each movement, it is possible to determine the Key Performance Indicator (KPI) that has been adopted and assess the performance of the Quay Container Crane (QCC). The results of the study identified that the value of MMBF (Mean Move Between Failures) decreased due to the accumulation of long-lasting heavy load operations, while the number of maintenance activities for machine parts and working hours continued to increase. Key Performance Indicator (KPI) as a management tool can guide QCC inspections and the results can provide useful insights for improving the performance of equipment and container loading and unloading operations in the future.","PeriodicalId":159477,"journal":{"name":"International Journal of Mechanical Engineering Technologies and Applications","volume":"327 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2021-07-02","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"114963369","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

引用次数: 7

The Calculation of Expense Reduction based on the Efficiency of Cyclone by Computational Fluid Dynamic 基于旋流器效率的降费计算

International Journal of Mechanical Engineering Technologies and Applications Pub Date : 2021-07-02 DOI: 10.21776/MECHTA.2021.002.02.1

Dhany Eko Wahyudi, Syarifa Nur’aini, W. Dewi, Retno Mardiyah Aisyah, E. Septiani

{"title":"The Calculation of Expense Reduction based on the Efficiency of Cyclone by Computational Fluid Dynamic","authors":"Dhany Eko Wahyudi, Syarifa Nur’aini, W. Dewi, Retno Mardiyah Aisyah, E. Septiani","doi":"10.21776/MECHTA.2021.002.02.1","DOIUrl":"https://doi.org/10.21776/MECHTA.2021.002.02.1","url":null,"abstract":"The rotary kiln in cement industries used hot air (temperature 14500C) for doing a reaction to form a clinker. The outlet hot air from the combustion reaction in the kiln is reused to decrease the water content of coal in the coal mill. However, the hot air that contained ash will affect the drying process in the coal mills will not reach the maximum point. Therefore, the hot air needs treatment to separate the hot air and particle. The hot air is carried out to the cyclone. The goal of this study is to investigate the efficiency work of cyclones in cement industries using the CFD method. Besides, the other goal of this research will convey the expense that is reduced in decreasing the ash content in hot air. In general, the good cyclone has the low-pressure drop, the turbulence model using Reynold Average Navier Stokes (RANS) simulation,k-ε standard, with the Lagrangian model to solve the problem in particle lane. The result of this study is showing the pattern of the ash in cyclones, the pressure in cyclones, and the efficiency of cyclones. The number of efficiencies will affect the reduction of expense in this section.","PeriodicalId":159477,"journal":{"name":"International Journal of Mechanical Engineering Technologies and Applications","volume":"19 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2021-07-02","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"126896584","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

引用次数: 0

Application of Fiber Made from Bark of Salak (Salacca Zalacca) Tree as Reinforcement in Polymer Matrix Composites 萨拉卡树皮纤维在聚合物基复合材料中的应用

International Journal of Mechanical Engineering Technologies and Applications Pub Date : 2021-07-02 DOI: 10.21776/MECHTA.2021.002.02.9

A. Laksono, G. U. N. Tajalla, Oliever Andrea Parusha

{"title":"Application of Fiber Made from Bark of Salak (Salacca Zalacca) Tree as Reinforcement in Polymer Matrix Composites","authors":"A. Laksono, G. U. N. Tajalla, Oliever Andrea Parusha","doi":"10.21776/MECHTA.2021.002.02.9","DOIUrl":"https://doi.org/10.21776/MECHTA.2021.002.02.9","url":null,"abstract":"Although Indonesia is abundant supply of salak (Salacca zalacca) fruit, bark of salak is not yet advanced utilized. This work therefore chracterized its fiber and process it into polymer matrix composites. The study was conducted using varied chemical treatments. Delignification using NaOH solution with concentration of 1%, 5%, 10% with 3 hours immersion time. Bleaching treatment was using H2O2 media with varied immersion time at 30, 60 and 90 minutes. Tensile tests, impact tests, microscopic image test using scanning electron microscopy (SEM) and chemical composition test using fourier-transform infra-red (FTIR) spectroscopy were carried out in this work. This work showed that optimal delignification treatment can be found when 5% NaOH concentration was used. The corresponding ultimate tensile strength and impact strength were 25.47 MPa and 11.95 kJ/m2, respectively. The optimal bleaching treatment was 90 minutes immersion. The results of SEM image analysis showed that the salak midrib fiber composite without treatment has a lousy interface. Meanwhile, fiber with delignification treatment only has reasonable good interface and fiber with delignation treatment followed by bleaching treatment has excellent interface. FTIR test results showed that the salak midrib fiber composite without treatment had a cellulose component although hemicellulose and lignin levels still dominated. The delignification treatment had succesfully broken the lignin-specific C = O bond but still could not eliminated hemicellulose and lignin bond. In comparison, bleaching treatment reduced intensity of OH intensity, CH and CO which are typical hemicellulose and lignin functional groups. Based on the results of the study, salak midrib fiber with delignification chemical treatment using 5% NaOH for 3 hours followed by bleaching treatment using 2% H2O2 for 90 minutes was the best treatment.","PeriodicalId":159477,"journal":{"name":"International Journal of Mechanical Engineering Technologies and Applications","volume":"14 3 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2021-07-02","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"130813767","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

引用次数: 1

The Influence of Leachate Water on Corrosion Rate of Mild Steel Plate 渗滤液对低碳钢板腐蚀速率的影响

International Journal of Mechanical Engineering Technologies and Applications Pub Date : 2021-07-02 DOI: 10.21776/MECHTA.2021.002.02.7

A. Ghofur, Dhonie Adetya Rachman, Muhammad Mochtar Lutfi, Fathur Rahman

{"title":"The Influence of Leachate Water on Corrosion Rate of Mild Steel Plate","authors":"A. Ghofur, Dhonie Adetya Rachman, Muhammad Mochtar Lutfi, Fathur Rahman","doi":"10.21776/MECHTA.2021.002.02.7","DOIUrl":"https://doi.org/10.21776/MECHTA.2021.002.02.7","url":null,"abstract":"Leachate water from final waste landfill (Tempat Pembuangan Akhir, TPA) contains harmful substances for the environment and living organisms. Furthermore, the leachate water can deteriorate equipment buried near TPA, e.g. buried water pipe. This work investigated the corrosion rate of mild steel SPCC SD after immersion in leachate water of TPA Gunung Kupang and Cahaya Kencana located in South Kalimantan. The steel plate immersion into leachate water was worked out in 3 different cases. The first case was 2 weeks immersion in leachate water followed by 1 week contact with ambient air. In the second case, steel plate was immersed in leachate water for 1 week and then 2 weeks in direct contact with ambient air. The last one was steel plate immersion in leachate water for 3 weeks without any direct contact with ambient air. The investigation shows that longer contact duration between wet steel surface, after immersion in leachate water, with ambient air increases the corrosion rate. The investigation shows also that the corrosion rate due to leachate water from Gunung Kupang landfill is higher than that of Cahaya Kencana landfill. Corrosion rate for TPA Gunung Kupang case varies from 0.441 to 0.718 mmpy. Meanwhile, corrosion rate for TPA Cahaya Kencana varies from 0.131 to 0.495 mmpy. This is due to lower pH of leachate water from TPA Mount Kupang.","PeriodicalId":159477,"journal":{"name":"International Journal of Mechanical Engineering Technologies and Applications","volume":"35 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2021-07-02","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"127191835","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

引用次数: 0

Experimental Study of Updraft Gasification of Rice Husk and Coal to Produce Syngas 稻壳与煤上升气流气化制合成气的实验研究

International Journal of Mechanical Engineering Technologies and Applications Pub Date : 2021-07-02 DOI: 10.21776/MECHTA.2021.002.02.4

Fiqrei Akbar Nugroho, A. Syarief, Allexyus Mikhael, G. G. Supit

引用次数: 0

The Effect of Solution Treatment on Mechanical Properties and Micro Structure of Zr-10Ti-Sn Alloy for Screw Dental Implant Application 固溶处理对Zr-10Ti-Sn合金螺纹种植体力学性能和显微组织的影响

International Journal of Mechanical Engineering Technologies and Applications Pub Date : 2021-07-02 DOI: 10.21776/MECHTA.2021.002.02.2

Deva Ayu Utami, R. H. Mulyani, D. Prajitno

{"title":"The Effect of Solution Treatment on Mechanical Properties and Micro Structure of Zr-10Ti-Sn Alloy for Screw Dental Implant Application","authors":"Deva Ayu Utami, R. H. Mulyani, D. Prajitno","doi":"10.21776/MECHTA.2021.002.02.2","DOIUrl":"https://doi.org/10.21776/MECHTA.2021.002.02.2","url":null,"abstract":"The research was to investigate the effect of solution treatment on the mechanical properties and microstructure of Zr-10Ti-Sn alloy for dental implant biomaterials. The addition of titanium as a material has good corrosion resistance and stannum as a material has a low modulus young and can increase hardness of the alloy in accordance with the material criteria as a dental implant, which must have good corrosion resistance and good mechanical properties. Zr -10Ti-xSn alloy (x = 0, 2, and 4% wt) were subjected to solution treatment with temperature variations of 900oC, 1000oC and 1100oC with water quenching. The results is increase in stannum content can also increase the hardness because stannum can inhibit the enlargement of grain boundaries and the microstructure is more homogeneous and tends to be smaller with an uniaxial shape. Stannum as alpha stabilizer will form a hard alpha phase. Micro Vickers hardness test with the highest hardness value of 601,438 HV alloy Zr-10Ti-2Sn with 900oC solution treatment, phases formed were α-Zr and β-Zr and intermetallic Zr4Sn and SnTi3 Zr-10Ti-4Sn alloys which were identified using X-Ray Diffraction (XRD).","PeriodicalId":159477,"journal":{"name":"International Journal of Mechanical Engineering Technologies and Applications","volume":"87 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2021-07-02","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"116319434","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

引用次数: 0

Design of Automatic Feeder for Shrimp Farming Based on Internet of Things Technology 基于物联网技术的对虾养殖自动喂料机设计

International Journal of Mechanical Engineering Technologies and Applications Pub Date : 2021-07-02 DOI: 10.21776/MECHTA.2021.002.02.8

Ilham Arditya, T. A. Setyastuti, Fikri Islamudin, I. Dinata

引用次数: 3