International Journal of Advanced Research in Electrical, Electronics and Instrumentation Energy最新文献

{"title":"Implementing Labview Based LevelController","authors":"P. Patil, Nitesh Dongare, P. Bane, A. Merchant, Ankit Pitla","doi":"10.15662/IJAREEIE.2015.0405007","DOIUrl":"https://doi.org/10.15662/IJAREEIE.2015.0405007","url":null,"abstract":"The aim of our project is to design the PID controller using LabVIEW. The designing software use for \u0000this purpose is LabVIEW developed by National Instruments. We also intend to use a DAQ card by ADAM model \u00004022T and also USB to RS485 converter UD2535-U of milestone for interfacing computer with the hardware. The \u0000hardware is a Multiloop Trainer Kit mounted with a tank whose level has to be controlled using a feedback control \u0000loop. The feedback control loop is form by a tank, level sensor, controller, I to P converter and control valve. The \u0000designed soft PID controller will replace the electronic PID on trainer loop kit.","PeriodicalId":13702,"journal":{"name":"International Journal of Advanced Research in Electrical, Electronics and Instrumentation Energy","volume":"123 1","pages":"11-88"},"PeriodicalIF":0.0,"publicationDate":"2015-07-25","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"85676106","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"A Low Order System Frequency ResponseModel for Large Power System and AdaptiveLoad Shedding","authors":"K. Shah, Darshit S. Patel","doi":"10.15662/IJAREEIE.2015.0405008","DOIUrl":"https://doi.org/10.15662/IJAREEIE.2015.0405008","url":null,"abstract":"Now a days electrical system becomes very much large and Power demand will be increasing more and \u0000more. To satisfy the power demand nonconventional sources are incorporated in the field of electrical power generation \u0000and the system becomes Inter connected. Large power system disturbances sometimes causes interconnected system to \u0000become separated into some islands and it has either surplus of generation or load. If generation is more than it can be \u0000controlled by controlling the speed of speed governors connected with the generating station will result into change in \u0000frequency. This paper includes the derivation of simple low order system frequency response (SFR) model that can be \u0000used for estimating the frequency behaviour of the interconnected power system to sudden load disturbances. The SFR \u0000model is the simplify model to analyse system dynamics.","PeriodicalId":13702,"journal":{"name":"International Journal of Advanced Research in Electrical, Electronics and Instrumentation Energy","volume":"1 1","pages":"3845-3852"},"PeriodicalIF":0.0,"publicationDate":"2015-07-25","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"88141716","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Image Steganography using Variable KeyTechnique for Double Tier Security","authors":"Khushboo Jain, Amrit Kaur","doi":"10.15662/IJAREEIE.2015.04050031","DOIUrl":"https://doi.org/10.15662/IJAREEIE.2015.04050031","url":null,"abstract":"In this Paper, before applying the Steganography technique the secret message change into cipher to ensure the double tier security. In the Proposed technique the encrypted data is hidden in cover image using Modified LSB Technique. The Mean Square Error (MSE) and Peak Signal Noise Ratio (PSNR) measures the Imperceptibility of the proposed technique. Experimental results show that the Stego image is usually indistinguishable from the cover image.","PeriodicalId":13702,"journal":{"name":"International Journal of Advanced Research in Electrical, Electronics and Instrumentation Energy","volume":"24 1","pages":"4009-4015"},"PeriodicalIF":0.0,"publicationDate":"2015-07-25","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"73477646","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Pipeline Inspection and Borewell RescueRobot","authors":"B. Preeti, Borchate Trupti, Chavan Prajakta, V.A.Kulakarni","doi":"10.15662/IJAREEIE.2015.0405006","DOIUrl":"https://doi.org/10.15662/IJAREEIE.2015.0405006","url":null,"abstract":"The aim of this proposed system is to give an innovative concept to handle the bore well rescue operations without human intervention and to inspect any type of leakage in the pipe. Normal operation of child rescue is done by using big machines with large manpower involvement. It takes more time to rescue a child from the bore well and to check any kind of irregularities in pipe. The three finger mechanisms are employed in this design to go inside the pipe. The three finger mechanism is circumferentially and symmetrically spaced out 120o apart. The robot is made adaptive so that it can adjust its three finger mechanism according to the pipeline dimensions. This structural design makes it possible to have the adaptation to the diameter of pipe and to have adjustable attractive force towards the walls of pipe. In this proposed system, the condition of trapped child is captured with USB Camera and monitored on laptop. LM-35 Temperature Sensor is interfaced with Atmega 16 microcontroller to sense the temperature inside the bore well and to display it on terminal display on laptop. The robot structure consists of power supply, development board of atmega 16 and gear motors. Adding a claw or gripper was the initial hurdle for which additional power supply and DC gear motor were needed. The proposed system is intended to reduce the risk involved during the child rescue operation by analysing the situation and also to provide an option detect any leakage inside the pipe.","PeriodicalId":13702,"journal":{"name":"International Journal of Advanced Research in Electrical, Electronics and Instrumentation Energy","volume":"133 1","pages":"3831-3836"},"PeriodicalIF":0.0,"publicationDate":"2015-07-25","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"78474557","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"A New Cascaded 2-Level Inverter basedSTATCOM for High Power Applications","authors":"M. Abinaya, L.Priyanga, T. S. Padmanabhan, T.Heman","doi":"10.15662/IJAREEIE.2015.0405023","DOIUrl":"https://doi.org/10.15662/IJAREEIE.2015.0405023","url":null,"abstract":"This paper presents a simple STATCOM scheme using a cascaded two-level inverter-based multilevel inverter. The proposed topologies have two VSI based two-level inverters are connected in cascade through open-end windings of a three-phase transformer and filter elements. Converter fed dc-link voltages is regulates at different levels to obtain four-level operation. The proposed STATCOM multilevel inverter has operates under MATLAB/SIMULINK environment and the results are verified in balanced and unbalanced conditions. Further, stability behavior of the topology is investigated. The dynamic model is developed and transfer functions are derives under different conditions. The system behaviors are analyzing under various operating conditions.","PeriodicalId":13702,"journal":{"name":"International Journal of Advanced Research in Electrical, Electronics and Instrumentation Energy","volume":"1 1","pages":"3949-3957"},"PeriodicalIF":0.0,"publicationDate":"2015-07-25","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"76285648","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"An Efficient Storage Routing In FutureMobile Architecture","authors":"S.Sumithra, A.Hena Rubavathy","doi":"10.15662/ijareeie.2015.0405025","DOIUrl":"https://doi.org/10.15662/ijareeie.2015.0405025","url":null,"abstract":"This thesis presents an investigation of the designand evaluation of the generalized storage aware routing (GSTAR) protocol proposed for use in the Mobility First future Internet architecture. The GSTAR protocol uses innetwork storage to improve service quality and throughput in wireless access networks with varying radio link quality and/or disconnection. These gains are achieved using a combination of short-term buffering at routers to smooth out fluctuations in path quality along with delay-tolerant storage, to overcome total disconnection of the mobile device. The performance of the GSTAR protocol is evaluated for exemplary wireless access network scenarios using ns-3 based simulation models, and key design parameters are investigated. Each node in GSTAR maintains two kinds of topology information. The intrapartition graph contains information about path quality between no des in the current partition of the network. The path quality is determined using two metrics: short term and long term expected transmission time. Every no de compares these two metrics using the store/forward decision threshold and stores the data on finding that the path is degraded with the expectation that it may improve in the future. Inter-partition graph gives a probabilistic view of the connection patterns between no des in the network. It is used in the event of disconnections or partitions. The results show that if link quality fluctuations are random, the moving average scheme works well, while an exponentially weighted moving average is recommended for on-off channels with periodic outages. Simulation results are provided in each case, showing the benefit of adaptive threshold settings over the baseline non-adaptive case considered in earlier work.","PeriodicalId":13702,"journal":{"name":"International Journal of Advanced Research in Electrical, Electronics and Instrumentation Energy","volume":"33 1","pages":"3964-3970"},"PeriodicalIF":0.0,"publicationDate":"2015-07-25","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"80949117","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"On-line Interactive Data Acquisition andControl System for Embedded Real TimeApplications","authors":"Priyanka D. Patil, V. Shete, P. Awate","doi":"10.15662/ijareeie.2015.0405004","DOIUrl":"https://doi.org/10.15662/ijareeie.2015.0405004","url":null,"abstract":"This paper is about the application of data acquisition systems in industrial requirements for real time execution of events with industrial process control and automation. The main core of the system is an embedded hardware running a scaled-down version of Linux: a popular choice of operating system for embedded applications. On -line embedded web server is a challenging part of many embedded and real time data acquisition and control system applications. The World Wide Web is a global system of interconnected computer networks that use the standard Internet Protocol Suite (TCP/IP) to serve billion of users worldwide and allows the user to interface many real time embedded applications like data acquisition, Industrial automations and safety measures etc., In this project we approached towards the design and development of on-line Interactive Data Acquisition and Control System (IDACS) using ARM based embedded web server. It can be a network, intelligent and digital distributed control system. Single chip IDACS method improves the processing capability of a system and overcomes the problem of poor real time and reliability. This system uses ARM9 Processor portability with Linux operating system it makes the system which handling various processes based on multi tasking and reliable scheduling mechanisms. A novel approach is introduced to minimize the operational costs while operating with a large amount of data. The system is demonstrated to be suitable for different embedded applications by attaching several real-time modules through appropriate interfaces. The embedded web server technology is the combination of embedded device and Internet technology, through this embedded web server user can access their equipments remotely. The equipment mentioned here could be home appliances and factory devices. This paper is focused on realization of TCP/IP suite and user development platform for this embedded web server. The embedded web server design includes a complete web server with TCP/IP support and Ethernet interface. Web pages are written by Hyper text markup language (HTML).","PeriodicalId":13702,"journal":{"name":"International Journal of Advanced Research in Electrical, Electronics and Instrumentation Energy","volume":"15 1","pages":"3819-3826"},"PeriodicalIF":0.0,"publicationDate":"2015-07-25","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"88099319","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Power Quality Improvement of GridConnected Wind Energy System bySTATCOM-Control Scheme","authors":"M. ShivarajaD, S.Saranya","doi":"10.15662/IJAREEIE.2015.0405013","DOIUrl":"https://doi.org/10.15662/IJAREEIE.2015.0405013","url":null,"abstract":"when the wind power is connected to an electrical grid effects of the power quality. The effects of power quality measurements are the active power, reactive power, variation of voltage, flickers, harmonics and electrical behavior of the switching operation. The installation of the wind turbine with grid causes power quality problems determined by studying this paper. For this static compensator (STATCOM) with a battery energy storage system (BESS) at the point of common coupling to mitigate the power quality problems. The grid connected wind energy generation system for the power quality improvement by using STATCOM control scheme is simulated using SIMULINK power system blocked set. This is relives the main supply source from the reactive power demand of the load and induction generator in this proposed scheme. The improvement in the power quality on the grid has been presented here according to the guidelines specified in IEC-61400 standard (International Electro-technical commission) provides some norms and measurements.","PeriodicalId":13702,"journal":{"name":"International Journal of Advanced Research in Electrical, Electronics and Instrumentation Energy","volume":"70 1","pages":"3881-3886"},"PeriodicalIF":0.0,"publicationDate":"2015-07-25","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"86306635","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Design of Reliable Custom Topology forApplication Specific Network-On-Chip","authors":"M. Maheswari","doi":"10.15662/ijareeie.2015.0405035","DOIUrl":"https://doi.org/10.15662/ijareeie.2015.0405035","url":null,"abstract":"In this paper, Reliable custom topology for Application Specific Network-on-Chip (ASNoC) which consumes less area and power consumption with high data protection (error free) is proposed. The proposed design is achieved in two steps. First a custom topology is designed for ASNoC. Second, to improve the reliability of the custom topology, three novel error correction mechanisms have been designed and incorporated in the custom topology. The proposed three error correction codes consume less are and power consumption with high error correction capability compared to the existing error correction codes. Finally the proposed error correction codes are embedded in the custom topology to generate reliable custom topology. Cadence RTL encounter tool has been used for the analysis. The generated custom topology achieves 90% & 40% reliability improvement on data through on chip inter connects in low noise and in high noise environment respectively.","PeriodicalId":13702,"journal":{"name":"International Journal of Advanced Research in Electrical, Electronics and Instrumentation Energy","volume":"40 1","pages":"4039-4046"},"PeriodicalIF":0.0,"publicationDate":"2015-07-25","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"88740253","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Grid and Islanded Operations of PV EnergyManagement System by Means ofReconfiguration of Controllers","authors":"S.lokesh, N. Reddy","doi":"10.15662/IJAREEIE.2015.0405039","DOIUrl":"https://doi.org/10.15662/IJAREEIE.2015.0405039","url":null,"abstract":"In this idea the investigation, configuration of a photovoltaic energy management system with battery reinforcement displayed. The proposed system is work in both grid connected and autonomous load operations. Main advantage of the proposed system is that, the inverter functions as a current source in phase with the grid voltage, infusing energy to the network and controlling the dc-link voltage in grid-connected mode. The converter manages the battery charge and discharge. In islanded mode, the inverter control is reconnect to work as a voltage source using droop schemes. The dc/dc converter manage the dc-link voltage to empower the MPPT. An operation convention is proposed to guarantee the quality of the energy supply and minimize the losses of energy. A battery bank is joined with the dc interface as stores the energy for islanded operation mode. The point of this paper is to demonstrate that the proposed framework performs accurately, without risky homeless people for the inverter or the loads. Recreation and trial results on a 3-kW model demonstrate the possibility of the proposed control system.","PeriodicalId":13702,"journal":{"name":"International Journal of Advanced Research in Electrical, Electronics and Instrumentation Energy","volume":"51 1","pages":"4075-4082"},"PeriodicalIF":0.0,"publicationDate":"2015-07-25","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"86147241","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}