{"title":"MINIATURE HIGHLY SENSITIVE ELECTRON SPECTROMETER FOR THE ANALYSIS OF CORPUSCULAR FLUXES","authors":"A. Saulebekov","doi":"10.31489/2023no2/112-117","DOIUrl":"https://doi.org/10.31489/2023no2/112-117","url":null,"abstract":"The work is devoted to the theoretical development of miniature highly sensitive electron spectrometer for the analysis of the composition of corpuscular flows in a wide range of measured particle energies. The mirror type axially symmetric energy analyzerin the spectrometer is constructed on the basis of an electrostatic octupole-cylindrical field and has a long-focal-length distance. The focusing properties of the scheme have been calculated, and the luminosity and resolving power of the device have beenevaluated. As part of a set of equipment for spacecrafts, the proposed device will allow to determine the composition of charged particles in unsteady flows in interplanetary space. Also when designing the device there is a possibility to combine several methods of analysis (for example, with mass-spectrometric methods), which will successfully complement each other, which will provide high information content of joint analysis. This tendency is observed in the creation of space research complexes, which, as a rule, include several independent methods of analysis.","PeriodicalId":11789,"journal":{"name":"Eurasian Physical Technical Journal","volume":null,"pages":null},"PeriodicalIF":0.0,"publicationDate":"2023-06-21","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"44883600","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"MOLECULAR DYNAMIC SIMULATION OF PLASMA MATERIAL INTERACTION TOCALCULATE THEORETICAL SPUTTERING YIELD","authors":"Pahsa Alper","doi":"10.31489/2023no2/127-137","DOIUrl":"https://doi.org/10.31489/2023no2/127-137","url":null,"abstract":"In a fusion reaction two light nuclei, Deuterium and Tritium merge to form a single heavier nucleus Helium. However, two positive nuclei repel each other. In order to merge two nuclei they need to have very high velocities. High speed means, high temperature. For the reaction it is significant for a nuclei to keep at 100 million °C temperature. At this temperature D and T atoms form a plasma. In order the reaction to take place, the plasma temperature must be conserved or plasma should not be cooled. Tokamak reactors are designed to confine the plasma in a magnetic field. Thus, the cooling of the plasma is prevented by hitting the reactor walls. Plasma density and temperature must be at a certain level in order to initiate the reaction and to ensure continuity. During the reaction process, positive and negative ions escaping from the magnetic field environment interact with Tokamak walls and cause deformation. This causes the plasma wall to deteriorate over time and the release of neutrons to the environment. Plasma-Wall interaction is one of the most important problems that cause interruption of fusion in Tokamak rectors. The materials which most resistant to ion corrosion in the plasma wall are graphite, beryllium, aluminium and tungsten. In this work, plasma-material interaction is studied theoretically physical and chemical erosion caused by the plasma interactions of different wall material samples (graphite, aluminium and Tungsten) used in the fusion reactor and investigated with the Monte Carlo method with molecular dynamics.","PeriodicalId":11789,"journal":{"name":"Eurasian Physical Technical Journal","volume":null,"pages":null},"PeriodicalIF":0.0,"publicationDate":"2023-06-21","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"47418480","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"COEFFICIENT OF FRICTION AT REST OF ROUGH SURFACES","authors":"S. Khairaliyev S.","doi":"10.31489/2023no2/12-19","DOIUrl":"https://doi.org/10.31489/2023no2/12-19","url":null,"abstract":"At present, the process of designing dry friction units for mechanical engineering and some other structures is becoming more and more laborious, forcing designers to make more and more efforts in this work. A significant complication of the work performed gives the random nature of the roughness of both contacting surfaces and this circumstance forces the designers to look for new ways to solve existing problems. In this paper, we consider the contact interaction of two rough parts, the roughness of which is modeled by spherical surfaces. The proposed friction pair model makes it possible to estimate the interaction forces of contacting rough surfaces acting between the considered surfaces. It should be emphasized that this paper considers the interaction of contacting bodies with an applied external force capable of starting the relative movement / sliding of the considered bodies with rough surfaces.","PeriodicalId":11789,"journal":{"name":"Eurasian Physical Technical Journal","volume":null,"pages":null},"PeriodicalIF":0.0,"publicationDate":"2023-06-21","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"45512319","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"ENHANCING PHOTOMETRIC PERFORMANCE OF YAG:CeCERAMICS: INVESTIGATING THE ROLE OF ANNEALING IN RADIATION-ASSISTED SYNTHESIS","authors":"Zhassulan S. Zhilgildinov","doi":"10.31489/2023no2/118-126","DOIUrl":"https://doi.org/10.31489/2023no2/118-126","url":null,"abstract":"Ceramic samples of cerium-doped yttrium aluminum garnet (YAG:Ce) were successfully synthesized utilizing a high-powered electron flux field with a considerable energy level of 1.4 MeV and a power density of 23 kW/cm2. The ceramics were formed in a remarkable time span of just one second from a specifically prepared mix of yttrium, aluminum, and cerium oxides. The process of radiation-assisted synthesis of ceramics within radiation flux fields fundamentally deviates from the methodologies commonly employed today. Analyzed diffraction patterns closely align with those documented for YAG:Ce crystals, both in peak position and proportion. Furthermore, every sample consistently demonstrated a space group symmetry of Ia-3d. The luminescence and excitation spectra of ceramics synthesized in this study closely resemble those of YAG:Ce ceramics produced by other methods and YAG:Ce -based phosphors. The luminescence bands exhibit high efficiency, and the intensity ratios of the UV bands vary among the studied phosphors. The ceramics' radiation-to-luminescence conversion efficiency was found to be impressive, achieving scores of 0.57 and 0.48 in the industrial phosphors SDL 4000 and YAG-02, respectively. It was also observed that an increase in quantum efficiency of the samples could be achieved via high-temperature annealing. High conversion efficiency underscores the potential of the outlined luminescent ceramics synthesis method.","PeriodicalId":11789,"journal":{"name":"Eurasian Physical Technical Journal","volume":null,"pages":null},"PeriodicalIF":0.0,"publicationDate":"2023-06-21","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"45489152","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"METAL DESTRUCTION INPROCESS OF MANUFACTURING PARTS FROM MOLYBDENUM AND NIOBIUM","authors":"Z.N. Rasulov Z.N.","doi":"10.31489/2023no2/5-11","DOIUrl":"https://doi.org/10.31489/2023no2/5-11","url":null,"abstract":"The effect of coatings with surface-active properties and aerothermoacoustic treatment on Mo and Nb stampability, mechanical properties, and microdistortions of the crystal lattice is considered.An improvement in the quality of products obtained by drawing using these technologies has been established due to an increase in plasticity and a decrease in microdistortions of the crystal lattice. Modification of the surface of the tool reduces distortion in the micro-regions of the crystal lattice, reducing the stresses of the 2nd and 3rd kind of deformed Nb and improving its formability and the quality of semi-finished products and finished products. Low formability of Mo and Nb is associated with the presence of brittle phases of lamellar and sharp-edged shape, which reduce ductility and toughness.For Nb, an additional negative factor is the presence of grains up to 40–50 μm in size.","PeriodicalId":11789,"journal":{"name":"Eurasian Physical Technical Journal","volume":null,"pages":null},"PeriodicalIF":0.0,"publicationDate":"2023-06-21","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"48568276","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"AUTOMATED TEMPERATUREAND HUMIDITY CONTROL AND MONITORING SYSTEM FOR IMPROVING THE PERFORMANCE IN DRYING SYSTEM","authors":"L.A. Alkahdery","doi":"10.31489/2023no2/32-40","DOIUrl":"https://doi.org/10.31489/2023no2/32-40","url":null,"abstract":"Temperature and relative humidity are the key control parameters in drying processes for preserving and improving food quality. To achieve this goal, an automatic control system has been designed and built to provide adequate heat and drying streams according to the ambient requirements of various climatic zones and the kind of dried product. The control system combined with sensors allows the temperature and humidity of the drying chamber to be adjusted online by predetermined parameters. When there is little or no radiation present or when rapid drying rates are required, the heated air stream may be produced utilizing an electric motor fan in addition to an electrical backup heater. The fan automatically modifies its speed using the Pulse Width Modulationtechniquefor energy efficiency depending on the required temperature of the drying chamber. The control system based on Arduino Uno board is built within the solar dryer, after which tests are carried out. The test results are displayed on a display. Themanagement system was set up to maintain an ambient temperature between 40 and 60 °C andrelative humidity between 10 and 20 %. The system is a flexible solution for different climatic zones and dried products, according to experimental findings demonstratingits efficiency in managing the drying environment. Finally, this paper can conserve energy because it only works when the temperature around the food is below 60 oC.","PeriodicalId":11789,"journal":{"name":"Eurasian Physical Technical Journal","volume":null,"pages":null},"PeriodicalIF":0.0,"publicationDate":"2023-06-21","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"44289891","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"PERFORMANCE ANALYSIS AND DEVELOPMENT OF PATH LOSS MODEL FOR TELEVISION SIGNALS IN IMO STATE, NIGERIA","authors":"P. C. Iwuji","doi":"10.31489/2023no2/87-98","DOIUrl":"https://doi.org/10.31489/2023no2/87-98","url":null,"abstract":"It is impossible to overstate the importance of propagation models in wireless network planning, frequency assignment, and television parameter evaluation. The fact that no two locations are identical in terms of climatic conditions, building patterns, terrain, etc. makes using path loss predicting models for any area extremely challenging. Therefore, it is impossible to develop a single path loss model that applies to all environmental settings. The main aim of this study is to develop a path loss model for NTA channel 12 Owerri and evaluate its performance based on received signal strength values along five selected routes in Imo State, Nigeria.A suitable path loss model was developed by critically analyzing the measured path loss values of each base station, which were retrieved from the signal strength data received. The values of the developed path loss model were compared to those of other empirical path loss models developed by other researchers as well as the measured path loss values. The results show that the proposed path loss model is well suited for predicting the path loss of NTA channel 12 Owerri signals in the study environment, while the other conventional empirical models taken into consideration in this study overestimated the path loss of NTA channel 12 Owerri signals with Root Mean Square Error and Mean Error of 63.65 and above. Additionally, the findings indicate that NTA Owerri performs poorly at a distance of 18 kilometers from the base transmitting station. The overall findings are helpful for designing prospective television network channels in the study location and other similar environments.","PeriodicalId":11789,"journal":{"name":"Eurasian Physical Technical Journal","volume":null,"pages":null},"PeriodicalIF":0.0,"publicationDate":"2023-06-21","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"45572926","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"EXTRAORDINARY MAGNETORESISTANCE OF LASERANNEALED NANO BORON DEPOSITEDON OXIDIZED POROUS SILICON","authors":"Narjis Zamil Abdulzahra","doi":"10.31489/2023no2/20-31","DOIUrl":"https://doi.org/10.31489/2023no2/20-31","url":null,"abstract":"This study explores the impact of laser annealing on the electrical and magnetic properties of nano boron deposited on oxidized porous silicon (n-B/PSiO2) and its potential for spintronic applications. The Nd: YAG laser was used at varying energies to anneal the n-B thin films. Increasing the laser energy increased grain size and more ordered grain structures. It also increased surface roughness due to forming new grain boundaries and secondary phases. The electrical properties of the material were also affected by the laser annealing, with an increase in forward and reverse current and an increase in electrical resistivity with increased annealing temperature. The study also found that the magnetoresistance of the material increased with increasing laser temperature, attributed to tunnel injection through the thin silicon dioxide layer, and could be up to 7 times higher than non-annealed n-B/PSiO2in a magnetic field. The study highlights the importance of controlling materials’ grain size and structure for their physical and electrical properties. In addition, it provides insights into the electronic properties of n-B/PSiO2and the behavior of charge carriers in a magnetic field.","PeriodicalId":11789,"journal":{"name":"Eurasian Physical Technical Journal","volume":null,"pages":null},"PeriodicalIF":0.0,"publicationDate":"2023-06-21","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"46473685","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"INFORMATION-ENTROPY METHOD FOR DETECTING GRAVITATIONAL WAVE SIGNALS","authors":"Z. Zhanabaev","doi":"10.31489/2023no2/79-86","DOIUrl":"https://doi.org/10.31489/2023no2/79-86","url":null,"abstract":"The detection of gravitational waves came from a pair of merging black holes marked the beginning of the era of GW astronomy. Traditionally, to extract gravitational wave signals from experimental data, the scientific collaborations use the standard matched filtering technique. The matched filtering technique relies on the existing waveform templates, that makes it difficult to find gravitational wave signals that go beyond theoretical expectations. Moreover, the computational cost of matched filter is veryhigh, as it depends on the number of templates used. In this article, we propose a new information-entropy method for gravitational waves detection that does not require a theoretical bank of signal templates. To demonstrate the reliability of our method we conducted an analysis using simulated and real data. Through this study, we revealed that our measure of conditional information detects the gravitational wave signals and can be used along with the matched filtering method.","PeriodicalId":11789,"journal":{"name":"Eurasian Physical Technical Journal","volume":null,"pages":null},"PeriodicalIF":0.0,"publicationDate":"2023-06-21","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"42416420","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"FEATURES OF THE DECAY OF EXCITED STATES OF IONIC DYES IN THE NEAR FIELD OF METAL NANOPARTICLES","authors":"A. Kanapina","doi":"10.31489/2023no2/106-111","DOIUrl":"https://doi.org/10.31489/2023no2/106-111","url":null,"abstract":"The influence factor of silver nanoparticles on the intramolecular processes of deactivation of the electronically excited state of polymethine dyes (PD) of different ionicity has been studied. It has been demonstrated that the optical density forcationic 1 and anionic 2 dyes does not change under the action of the plasmon field of Ag nanoparticles. Whereas an increase in absorbance by almost 18% was observed for neutral dye 3. A decrease in the enhancement in fluorescence intensity in the series of anionic–cationic–neutral dyes was registered upon addition of Ag nanoparticles to their solutions. The fluorescence lifetime practically does not change for all PDs under study.Data processing within the framework of the model of the influence of a plasmonic nanoparticle on radiative transitions in a dye molecule showed that the values of plasmon-enhanced rates of radiative decay of molecules decreases from neutral to cationic and, finally, to anionic dye. The rates of energy transfer from PD to plasmonic nanoparticles decrease in the reverse sequence of dyes, i.e. anionic-cationic-neutral PD. This is expressed in a decrease in the proportion of neutral dye molecules that were deactivated by fluorescence.","PeriodicalId":11789,"journal":{"name":"Eurasian Physical Technical Journal","volume":null,"pages":null},"PeriodicalIF":0.0,"publicationDate":"2023-06-21","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"42271044","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}