{"title":"Direct ink writing of high-performance multi-level interlocked laminate-network titanium matrix composites","authors":"Zhenqiang Liu, Yujia Gu, Hao Yang, Yun Wang, Weili Liu, Chao Yu, Ruitao Li","doi":"10.1080/09276440.2023.2264039","DOIUrl":"https://doi.org/10.1080/09276440.2023.2264039","url":null,"abstract":"ABSTRACTIn this study, multi-level laminate-network boron nitride nanosheets (BNNSs)/TC4 composite with interlayer interlocking was fabricated using a facile direct ink writing (DIW) technique. In-situ 3D nano-configurations consisting of BNNSs and TiBx nanophases distributed around TC4 matrix particles formed the first-level network structure, while the above composite layers and TC4 layers with interlayer interlocking formed the second-level laminate structure. It exhibits a comparable high tensile strength of around 1203 MPa, compared to composites with a single-network structure, while demonstrating a 20% higher toughness of 55.8 MJ/m3. The interlayer interlocking microstructure interlayer could be responsible for the strength enhancement, which benefits the stress transfer between layers. The improved ductility could be attributed to the crack blocking adduced by the laminate structure and the 3D network in the composite layers.KEYWORDS: Metal matrix compositesdirect ink writingmulti-level microstructuremechanical propertiesstrengthening mechanisms Disclosure statementNo potential conflict of interest was reported by the author(s).Supplementary dataSupplemental data for this article can be accessed online at https://doi.org/10.1080/09276440.2023.2264039Additional informationFundingThis work was supported by the Postgraduate Research & Practice Innovation Program of Jiangsu Province under [Grant number KYCX21_3328]; The Research Foundation for the National Natural Science Foundation of China under [Grant number 51575245]; The National Science Foundation of Jiangsu Province under [Grant number BK20220533]; The Open Fund of Key Laboratory of Marine Materials and Related Technologies, CAS and Zhejiang Key Laboratory of Marine Materials and Protective Technologies under [Grant number 2020K06]; The senior Talent Foundation of Jiangsu University under [Grant number 18JDG030].","PeriodicalId":10653,"journal":{"name":"Composite Interfaces","volume":null,"pages":null},"PeriodicalIF":0.0,"publicationDate":"2023-10-02","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"135828813","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":4,"RegionCategory":"材料科学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Noor K. Faheed, Qahtan A. Hamad, Rasha Abdul-Hassan Issa
{"title":"Investigation of the effect of thermal, mechanical, and morphological properties of bio-composites prosthetic socket","authors":"Noor K. Faheed, Qahtan A. Hamad, Rasha Abdul-Hassan Issa","doi":"10.1080/09276440.2023.2262245","DOIUrl":"https://doi.org/10.1080/09276440.2023.2262245","url":null,"abstract":"ABSTRACTOne of the major alternatives for lasting prosperity is the use of biodegradable natural fiber as reinforcements in the production of composites to tackle worldwide environmental problems. This study aims to address utilizing available and sustainable natural fibers to prevent injury to people engaged in the fabrication of prosthetic limb sockets while maintaining socket strength. An above-the-knee prosthetic socket of natural fiber-reinforced composites was prepared via the vacuum molding method. Linen, hemp, carbon, monofilament, and glass are the materials utilized. For assessing the degree of contact between the matrix and fibers, Fourier transform infrared (FTIR), scanning electron microscopy (SEM), differential scanning calorimetry (DSC), and tensile tests were utilized. The finding shows that no novel peak was seen in the FTIR, which indicates no new material was produced. It’s related to the physical link between reinforcements and resin. SEM micrographs confirmed that the results corroborated those from the FTIR. DSC data indicated that as the number of layers rose, the glass transition temperature decreased, and mixing natural fibers with synthetics did not affect crystallization temperatures. The proposed tests have been conducted to characterize the interfacial strength, providing further information for the futuristic use of composites in various engineering applications.KEYWORDS: Natural fiberlinenhempmonofilamentprostheticFTIRSEMDSC AcknowledgementsThe authors would like to thank all the processes at the University of Technology–Baghdad.Disclosure statementNo potential conflict of interest was reported by the author(s).Data availability statementIt was formed through the investigation as are issue to a data-sharing order and reachable on an open basis that does not clash datasets with DOIs","PeriodicalId":10653,"journal":{"name":"Composite Interfaces","volume":null,"pages":null},"PeriodicalIF":0.0,"publicationDate":"2023-09-30","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"136279928","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":4,"RegionCategory":"材料科学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Roles of different organic-inorganic hybrid interfaces in enhancing the mechanical properties of continuous basalt fiber/epoxy composites","authors":"Zhenhan Yan, Shengchang Zhang, Yingying Zhao, Qibin Xu, Mengjin Jiang, Pengqing Liu, Shiyi Zhou","doi":"10.1080/09276440.2023.2264041","DOIUrl":"https://doi.org/10.1080/09276440.2023.2264041","url":null,"abstract":"ABSTRACTIn order to enhance the interfacial adhesion between continuous basalt fibers (CBFs) and epoxy (EP) matrix and the mechanical properties of resultant composites, the organic – inorganic hybrid compatibilization layer (OIHCL) composed of flexible 1,6-hexanediol diglycidyl ether (HDE) chains and rigid nano-silica (SiO2) is grafted on CBFs surface. With increasing the SiO2 content in the OIHCL, the structure and composition of the OIHCL change from a single layer composed of a well-dispersed SiO2 phase and continuous HDE phase to a double layer composed of an HDE/SiO2 inner-layer and aggregated SiO2 outer-layer. And, the effects of different OIHCLs on the mechanical performances of resultant composite are studied in details. The results show that the single-layer OIHCL exhibits stronger reinforcing effects in the interfacial shear strength (IFSS), tensile strength, and flexural strength of resultant composite. For example, the IFSS, tensile strength, and flexural strength of the CBFs-g-12.5%-(HDE/SiO2)/EP composite can reach 47.1 MPa, 466.1 MPa, and 660.5 MPa, respectively. Furthermore, the impact strength of the CBF/EP composites can be effectively enhanced by only grafting a flexible HDE layer on CBF surfaces. Finally, the aggregated SiO2 derived from the outer-layer of double-layer OIHCLs can deteriorate the interfacial adhesion, and all mechanical performances of resultant composites.KEYWORDS: Surface modificationinterface/interphasepolymer-matrix compositescontinuous basalt fibermechanical properties Disclosure statementThe authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper.Author contributionsZ.Y. was mainly responsible for the most of experimental work and the related measurements. SC.Z. was mainly responsible for the experimental design, the result analysis, the manuscript writing, and the foundation supporting. Y.Z was responsible for the experiment work about Molecules Simulation. Q.X contributed to the analysis of the results. M.J was mainly responsible for the foundation supporting and the result analysis. P.L and SY.Z. were responsible for the experimental supervision and paper critical revision.Supplemental dataSupplemental data for this article can be accessed online at https://doi.org/10.1080/09276440.2023.2264041Additional informationFundingThe authors were grateful to the Science and Technology Program of Sichuan Province (No. 2023YFG0342) and the Open Project Program of Basalt Fiber and Composite Materials Key Laboratory of Sichuan Province (No. SZXX202004) for financial support.","PeriodicalId":10653,"journal":{"name":"Composite Interfaces","volume":null,"pages":null},"PeriodicalIF":0.0,"publicationDate":"2023-09-29","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"135199144","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":4,"RegionCategory":"材料科学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Changping Yin, Yefan Zhang, Wei Liao, Jiao Liu, Nan Wu, Suli Xing, Jun Tang
{"title":"Improving mechanical properties of high-temperature resistant carbon fiber/phthalonitrile composites via surface modification: a comparative study on modification methods","authors":"Changping Yin, Yefan Zhang, Wei Liao, Jiao Liu, Nan Wu, Suli Xing, Jun Tang","doi":"10.1080/09276440.2023.2262253","DOIUrl":"https://doi.org/10.1080/09276440.2023.2262253","url":null,"abstract":"ABSTRACTThe interfacial bonding is of essential importance for the mechanical properties of high-temperature resistant carbon fiber/phthalonitrile composite materials. To promote the interfacial adhesion of carbon fiber/phthalonitrile composites, three surface modification methods, namely HP302 sizing, diazotization modification, and oxidation-diazotization modification, were applied and compared. The results showed that the de-sizing treatment barely affected the mechanical properties of the composites. Both re-sizing with HP302 agent and diazotization modification improved the mechanical properties, while the mechanical properties were drastically decreased via the oxidation-diazotization modification. Among these surface modification methods, the diazotization treatment derived the best mechanical properties of carbon fiber/phthalonitrile composites both at room and high temperature. Specifically, the flexural strengths were 345 MPa (RT), 525 MPa (300°C), and 442 MPa (400°C), which were 47%, 302%, and 281% higher than those of the pristine composites. The interlaminar shear strengths were 33 MPa (RT), 26 MPa (300°C), and 27 MPa (400°C), which were all over twofold than those of the original counterparts.KEYWORDS: Carbon fiberphthalonitrile resincomposite materialssurface modificationmechanical properties Disclosure statementNo potential conflict of interest was reported by the author(s).Supplemental dataSupplemental data for this article can be accessed online at https://doi.org/10.1080/09276440.2023.2262253Additional informationFundingThis work was supported by the Key Research and Development Program of Hunan Province, China (Great numbers 2018GK2062). Jun Tang would like to acknowledge the financial support from National Natural Science Foundation of China with grant No. 52003295.","PeriodicalId":10653,"journal":{"name":"Composite Interfaces","volume":null,"pages":null},"PeriodicalIF":0.0,"publicationDate":"2023-09-26","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"134960637","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":4,"RegionCategory":"材料科学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
S Saravanakumar, S Sathiyamurthy, P Pathmanaban, P Devi
{"title":"Integrating machine learning and response surface methodology for analyzing anisotropic mechanical properties of biocomposites","authors":"S Saravanakumar, S Sathiyamurthy, P Pathmanaban, P Devi","doi":"10.1080/09276440.2023.2260239","DOIUrl":"https://doi.org/10.1080/09276440.2023.2260239","url":null,"abstract":"ABSTRACTThis study enhances the anisotropic mechanical properties of banana fiber-epoxy composites by optimizing fiber loading, orientation, and treatment using Response Surface Methodology (RSM) and Artificial Neural Network (ANN). RSM suggests optimal values: fiber loading at 33 wt%, NaOH treatment at 6.8 wt%, and fiber orientation at 15 degrees. This material has exceptional mechanical characteristics, including a maximum tensile strength (TLS) of 31.72 MPa, a maximum flexural strength (FLS) of 42.86 MPa, and a maximum impact strength (IPS) of 38.56 kJm-2. ANN effectively predicts strengths with high R2 scores of 0.969, 0.984, and 0.954 for tensile, flexural, and impact strengths. Incorporating batch normalization and dropout layers enhances robustness. The study concludes that NaOH treatment and fiber orientation significantly impact the composite’s anisotropy.KEYWORDS: ANNbiocompositesfiber orientationalkali treatmentanisotropic behaviormechanical propertiesresponse surface methodology (RSM) AcknowledgementsThe authors would like to acknowledge the scheme of Innovation, Technology Development, and Deployment (1819) of the Department of Science and Technology (DST) - Delhi.Disclosure statementNo potential conflict of interest was reported by the author(s).Author contributionAuthor 1: Corresponding AuthorAuthor 2: Research GuideAuthor 3: Machine Learning Prediction model developed.","PeriodicalId":10653,"journal":{"name":"Composite Interfaces","volume":null,"pages":null},"PeriodicalIF":0.0,"publicationDate":"2023-09-20","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"136264295","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":4,"RegionCategory":"材料科学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Effect of Ni addition on the behavior of dissimilar A356-AZ91/CeO <sub>2</sub> aluminum-magnesium based composite fabricated by friction stir process technique","authors":"Shashi Prakash Dwivedi, Shubham Sharma","doi":"10.1080/09276440.2023.2260236","DOIUrl":"https://doi.org/10.1080/09276440.2023.2260236","url":null,"abstract":"ABSTRACTIn the present study, the Behavior of Dissimilar A356-AZ91/CeO2 Aluminum-Magnesium Based Composite Fabricated by Friction Stir Process Technique was observed. The Macrostructure of A356-AZ91/5%CeO2/2% Ni showed a defect-free and crack-free composite. Microstructural examination revealed that the FSP effectively distributed the CeO2 particles within the matrix, resulting in a refined microstructure. Tensile strength of A356-AZ91 matrix material was improved by about 38.04% after the addition of 5% CeO2. However, with the 2% Ni addition to A356-AZ91/5% CeO2 composite displaying further enhancement. The addition of 5% CeO2 and 2% Ni to the A356-AZ91 alloy through FSP showed a 44.78% improvement in tensile strength. There was an improvement in the hardness after adding the 2% Ni- 5% CeO2 particles was found 41.66%. Hardness of A356-AZ91-5% CeO2 was improved only by about 28.33% without addition of 2% Ni. Wear testing of aluminum composite was carried out using a pin-on-disc apparatus. The wear rate of A356-AZ91 alloy decreased by about 70% after the addition of the 2% Ni- 5% CeO2 particles. However, wear rate of A356-AZ91 alloy decreased only by about 61.66% after the addition of 5% CeO2 particles.KEYWORDS: Interfacial layermacrostructureFSP techniquefatigue strengthwear Disclosure statementNo potential conflict of interest was reported by the author(s).","PeriodicalId":10653,"journal":{"name":"Composite Interfaces","volume":null,"pages":null},"PeriodicalIF":0.0,"publicationDate":"2023-09-18","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"135109323","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":4,"RegionCategory":"材料科学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Cécile Sillard, Eder Castro, Jerachard Kaima, Q. Charlier, J. Viguié, Maxime Terrien, Ittichai Preechawuttipong, R. Peyroux, Evelyne Mauret, Alain Dufresne
{"title":"Bio-based composites made from bamboo fibers with high lignin contents: a multiscale analysis","authors":"Cécile Sillard, Eder Castro, Jerachard Kaima, Q. Charlier, J. Viguié, Maxime Terrien, Ittichai Preechawuttipong, R. Peyroux, Evelyne Mauret, Alain Dufresne","doi":"10.1080/09276440.2023.2253640","DOIUrl":"https://doi.org/10.1080/09276440.2023.2253640","url":null,"abstract":"","PeriodicalId":10653,"journal":{"name":"Composite Interfaces","volume":null,"pages":null},"PeriodicalIF":2.6,"publicationDate":"2023-09-05","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"81293000","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":4,"RegionCategory":"材料科学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Enhancing the flexural properties of CFRP with vacuum-assisted deposition of cellulose microfibrils to create a multiscale reinforcement network","authors":"F. J. Goyo-Brito, M. Pereira-da-Silva, J. Tarpani","doi":"10.1080/09276440.2023.2248771","DOIUrl":"https://doi.org/10.1080/09276440.2023.2248771","url":null,"abstract":"","PeriodicalId":10653,"journal":{"name":"Composite Interfaces","volume":null,"pages":null},"PeriodicalIF":2.6,"publicationDate":"2023-08-25","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"90487511","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":4,"RegionCategory":"材料科学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
V. I. Kuz'min, V. Lysak, S. V. Kuz’min, E. V. Kuz’min
{"title":"Formation characteristics and properties of an explosion-welded steel–aluminum composite with a diffusion barrier","authors":"V. I. Kuz'min, V. Lysak, S. V. Kuz’min, E. V. Kuz’min","doi":"10.1080/09276440.2023.2248767","DOIUrl":"https://doi.org/10.1080/09276440.2023.2248767","url":null,"abstract":"","PeriodicalId":10653,"journal":{"name":"Composite Interfaces","volume":null,"pages":null},"PeriodicalIF":2.6,"publicationDate":"2023-08-24","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"72928413","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":4,"RegionCategory":"材料科学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Atmospheric plasma spray coating of antibacterial nano silver-hydroxyapatite on titanium surface for biomedical applications","authors":"U. Olgun, H. Cetin, A. Hoş, M. Gülfen, F. Üstel","doi":"10.1080/09276440.2023.2249697","DOIUrl":"https://doi.org/10.1080/09276440.2023.2249697","url":null,"abstract":"","PeriodicalId":10653,"journal":{"name":"Composite Interfaces","volume":null,"pages":null},"PeriodicalIF":2.6,"publicationDate":"2023-08-24","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"88375246","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":4,"RegionCategory":"材料科学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}