Upstream Oil and Gas Technology最新文献

{"title":"Experimental investigation of bypassed-oil recovery in tight reservoir rock using a two-step CO2 soaking strategy: Effects of fracture geometry","authors":"Muhend Milad ,&nbsp;Radzuan Junin ,&nbsp;Akhmal Sidek ,&nbsp;Abdulmohsin Imqam ,&nbsp;Gamal A. Alusta ,&nbsp;Agi Augustine ,&nbsp;Muhanad A. Abdulazeez","doi":"10.1016/j.upstre.2023.100093","DOIUrl":"https://doi.org/10.1016/j.upstre.2023.100093","url":null,"abstract":"<div><p>The potential of the CO₂<span> soaking procedure has been generally acknowledged as a valid way to advance the tight rock oil recovery. Over the last decade, a significant number of Huff-n-Puff (H-n-P) experiments have been conducted to develop unconventional oil reservoirs. However, the majority of experiments used fully saturated cores and unconfined core holders. Therefore, the average oil recovery at the field-scale could not be accurately estimated. Besides, the effect of key factors such as fracture geometry on bypassed oil recovery has remained obscure. For better quantifying CO</span>₂ H-n-P efficiency in oil fields, this study proposes an immiscible CO₂<span> soaking process aimed at bypassing the oil before conducting the H-n-P process using various fracture forms and dimensions. Tight cores from Sarawak with an average porosity and permeability of 9% and 0.07 md, respectively, were employed in this experimental research. The importance of the fracture surface areas (FSA), fracture depth (FD), width (FW), and diameter was thoroughly studied. The research findings revealed that the two-step CO</span>₂<span> soaking procedure significantly reduces the effectiveness of the currently applied laboratory H-n-P process. However, the outcomes are more consistent with the current average oil recoveries in field pilots. The study demonstrates that FD is the most critical factor in maximizing the remaining oil recovery. The research indicates that the FSA does not always follow a specific trend. It is, however, dependent on the fracture geometry. The significance of the crack's surface area and fracture intensity is determined to be primarily dependent on the fracture shape and the utilized core holder system, respectively. The study's findings presented a higher degree of accuracy in estimating actual oil recovery from tight reservoirs employing two-step soaking technology.</span></p></div>","PeriodicalId":101264,"journal":{"name":"Upstream Oil and Gas Technology","volume":"11 ","pages":"Article 100093"},"PeriodicalIF":0.0,"publicationDate":"2023-09-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"49726699","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"A Review of Modern Approaches of Digitalization in Oil and Gas Industry","authors":"Salam Al-Rbeawi","doi":"10.1016/j.upstre.2023.100098","DOIUrl":"https://doi.org/10.1016/j.upstre.2023.100098","url":null,"abstract":"&lt;div&gt;&lt;p&gt;This paper introduces a review of the modern approaches of digitalization in the oil and gas industry&lt;span&gt;. The objective is understanding the current applications of the traditional technologies used in the petroleum industry and studying the opportunities for implementing innovative digital tools and systems that could enhance the operational efficiency and reduce the cost, risk, and environmental impacts.&lt;/span&gt;&lt;/p&gt;&lt;p&gt;The paper consists of several tasks starting from reviewing the present technologies used mainly in the upstream activities: exploration, field development, drilling and completion, and operation and production. The techniques used for gathering and analyzing the big data packages received from unlimited digitalized resources is the second task covered in this paper while the computing technologies such as cloud and cognitive computing as well as the advanced analytical and numerical solutions developed by real-time algorithms is the third task. Detail information about the short- and long-term digitalization technologies in both hardware and software parts is represented in this paper such as robotics and automation, powerful sensors and measuring tools, unmanned vehicles and drones, 3D printers and wearable gadgets as well as artificial inelegance, machine learning, and digital-twin computing. Real examples of currently used digitalized applications in different upstream sections of the petroleum industry are demonstrated while the expected added values created by the digitalization for the industry and communities and the possible changes either positively or negatively in the operational costs, maintenance patterns, workforce safety, environmental impacts, job positions, and the required skills and experiences during digitalization era are explained.&lt;/p&gt;&lt;p&gt;The outcomes are summarized in the following points. The digitalization should be the priority for most upstream companies in order to enhance and optimize the production system. The big volume of data may require innovative computing tools that could develop powerful analytical models used for calibrating the production environment and maximizing the production capacity of oil and gas fields. Data transfer and data sharing are two key factors in the digital transformation where the integrated data platforms could enhance the collaboration among the participants of the oil and gas ecosystems and accelerate innovative solutions. The digital era may lead to a sharp decline in the workforce and significant changes in the job position description as the human intervention with the production system might be minimized. The expected added value of the digital transformation during the next decades will be very big wherein the upstream petroleum industry may have the biggest share that could be more than 60% of the total investments while the midstream industry may have only 10%. There will be also a lot of challenges represented by the fact that the petroleum industry ha","PeriodicalId":101264,"journal":{"name":"Upstream Oil and Gas Technology","volume":"11 ","pages":"Article 100098"},"PeriodicalIF":0.0,"publicationDate":"2023-09-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"49733547","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Estimating total organic carbon (TOC) of shale rocks from their mineral composition using stacking generalization approach of machine learning","authors":"Solomon Asante-Okyere ,&nbsp;Solomon Adjei Marfo ,&nbsp;Yao Yevenyo Ziggah","doi":"10.1016/j.upstre.2023.100089","DOIUrl":"https://doi.org/10.1016/j.upstre.2023.100089","url":null,"abstract":"<div><p>A fundamental parameter in the exploration and development of unconventional shale reservoirs is total organic carbon (TOC). To achieve reliable TOC values, it requires a labour intensive and time-consuming laboratory experiment. On the other hand, models have been proposed using geophysical well logs as input variables with little attention paid to the contribution of mineralogical parameters in the evaluation of TOC. In this paper, a novel stacking machine learning technique is examined to generate accurate TOC predictions from the mineral content of the shale rock in the Sichuan Basin. The stacking machine learning model involves first-level models of multivariate adaptive regression spline (MARS), random forest (RF) and gradient boosted machine (GBM) known as base learners, while MARS was further used in the next step as the meta learner model. The research result indicated that the stacking TOC model outperformed the single applied models of MARS, GBM and RF. The proposed stacking TOC model generated estimates having the least error statistics of 0.29, 0.54 and 0.54 for MSE, RMSE and MAPE respectively while producing the highest correlation of 0.86 during the model validation stage. Therefore, stacking machine learning approach permits an improved estimation of TOC from the mineralogy of the rock.</p></div>","PeriodicalId":101264,"journal":{"name":"Upstream Oil and Gas Technology","volume":"11 ","pages":"Article 100089"},"PeriodicalIF":0.0,"publicationDate":"2023-09-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"49734117","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Well perforating—More than reservoir connection","authors":"Paulo Celso M. Zuliani,&nbsp;Carina Ulsen,&nbsp;Nara A. Policarpo","doi":"10.1016/j.upstre.2023.100088","DOIUrl":"https://doi.org/10.1016/j.upstre.2023.100088","url":null,"abstract":"<div><p><span>From upstream to downstream, all phases are equally important when developing an oil field. To extract the hydrocarbons from the reservoir in a controlled manner, a connection between the wellbore and the fluid contained in the formation is needed. The most common way to make this connection is by perforating </span>tunnels<span> along the cemented metal casing and the rock behind it. These channels will allow the formation fluid to flow to the wellbore and consequently to the surface. The characteristics of these tunnels are relevant for production and need to be carefully chosen. Not selecting the right perforating system and or technique will affect the variables that dictate the production rate. In this paper, well perforation<span> techniques were reviewed. Perforating parameters, such as depth of penetration, tunnel clean-up, entrance hole, and pressure balance, among many others, can have a severe impact on the final production results. We will demonstrate that the challenges faced by the reservoir engineers, during the designing phase, in choosing among the existing options are just the beginning of the integrated and collaborative workflow. The balance between the “best” perforating technique and the expenses of using it, must be carefully analyzed. Usually, the value difference between the charges, guns, and service providers is the smallest portion of the entire budget. This factor makes the choice of the gun system a multi-disciplinary matter.</span></span></p></div>","PeriodicalId":101264,"journal":{"name":"Upstream Oil and Gas Technology","volume":"11 ","pages":"Article 100088"},"PeriodicalIF":0.0,"publicationDate":"2023-09-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"49712003","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Design of light-Weight Cenospheres Cement Slurries Improved by a Mixture of Nano Silica, CFs and Silica Flour for Oil Wellbores","authors":"A.R. Alavi Bakhtiarvand,&nbsp;A.R. Khoshniyat,&nbsp;B. Mirshekari","doi":"10.1016/j.upstre.2023.100092","DOIUrl":"https://doi.org/10.1016/j.upstre.2023.100092","url":null,"abstract":"<div><p><span><span><span>In the oil and gas industry, during drilling and cementing operations, </span>lost circulation<span><span> is a widespread common and costly problem. Lost circulation mainly occurs through the weak formations and high permeable zones. This study aimed to design and build light-weight </span>cement slurries with high </span></span>compressive strength<span><span> to solve this issue. Cenospheres<span> additive reduced the cement slurry density in order to eliminate water requirement. Then, nano-silica, due to its high pozzolanic reactions<span><span> and fine particles, accelerated the cement hydrations and reduced pore areas in the cement slurry. Another vital additive was Cellulosic Fiber (CF), which improved cement properties by absorbing </span>nano silica and </span></span></span>Calcium Silicate Hydrate<span> (C-S-H) gels to its surface. This fiber acted as a bridge to prevent Cenospheres from separating in the cement matrix<span>. Silica Flour (SF) in this formulation also played a crucial role in improving compressive strength. Scanning Electron Microscopy (SEM) presented that selecting an appropriate amount of these additives in cement slurry formulations is a significant factor to obtain a condensed and packed cement structure. The results obtained in this study showed that the combined materials could reduce cement slurry density in the range of 67 to 97 lb/ft</span></span></span></span>³. The best sample among them is the sample with a density of 86 lb/ft³, obtaining cement slurry with compressive strength of 2845 psi, 6 cm³<span><span> fluid lo Further density reduction which is can reduce loss circulation in depleted fields or in filed with low fracture gradients<span> ss and zero free water. In this study, three acceptable rheological properties namely; Plastic Viscosity (PV), Yield Point (YP), Gel Strength (GS), and </span></span>thickening time were also obtained in this sample.</span></p></div>","PeriodicalId":101264,"journal":{"name":"Upstream Oil and Gas Technology","volume":"11 ","pages":"Article 100092"},"PeriodicalIF":0.0,"publicationDate":"2023-09-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"49733795","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Stuck pipe prediction from rare events in oil drilling operations","authors":"Salvatore D’Amicis ,&nbsp;Marta Pagani ,&nbsp;Matteo Matteucci ,&nbsp;Luigi Piroddi ,&nbsp;Andrea Spelta ,&nbsp;Fabrizio Zausa","doi":"10.1016/j.upstre.2023.100096","DOIUrl":"https://doi.org/10.1016/j.upstre.2023.100096","url":null,"abstract":"<div><p>Stuck-pipe phenomena are relatively rare in drilling operations in the oil &amp; gas industry, but can have disastrous economic consequences, causing costly time delays and sometimes even the loss of expensive machinery. In this work, we develop an event-based prediction model that relates the occurrence of precursor events to the stuck-pipe phenomena. To this aim, the detectors of various types of precursor events that typically anticipate stuck-pipe occurrences are first designed based on the available mudlog data. A Hidden Markov Model (HMM) is then developed to relate these precursor events to actual drilling problems, producing different levels of alarm, with the ultimate goal of predicting stuck pipes. The model has been tested on a dataset of wells with different characteristics, showing positive results.</p></div>","PeriodicalId":101264,"journal":{"name":"Upstream Oil and Gas Technology","volume":"11 ","pages":"Article 100096"},"PeriodicalIF":0.0,"publicationDate":"2023-09-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"49734070","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"A new method for predicting casing wear in highly deviated wells using mud logging data","authors":"Asgar Eyvazi Farab ,&nbsp;Khalil Shahbazi ,&nbsp;Abdolnabi Hashemi ,&nbsp;Alireza Shahbazi","doi":"10.1016/j.upstre.2023.100094","DOIUrl":"https://doi.org/10.1016/j.upstre.2023.100094","url":null,"abstract":"<div><p>Casing wear is an essential and complex phenomenon in oil and gas wells. Research has been conducted to predict this phenomenon. This study was conducted at a well in southwestern part of Iran. In this paper, the forces exerted on the drill string are primarily studied. Next, the contact force between the drill string and the casing is calculated. Finally, the wear volume and the depth of the wear groove are determined. These calculations were performed using MATLAB and Python software. In addition, to achieve high accuracy of coding, mud log data was used to make the results more precise. It has also been shown that increasing RPM increases the depth of wear and attempts to drill a highly deviated wells as a sliding mode. Finally, the obtained results were compared and matched with the wireline logs recorded from the well.</p></div>","PeriodicalId":101264,"journal":{"name":"Upstream Oil and Gas Technology","volume":"11 ","pages":"Article 100094"},"PeriodicalIF":0.0,"publicationDate":"2023-09-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"49712265","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"System Dynamics Approach to Evaluate the Oil and Gas Supply Chain: A Case Study","authors":"Ayush Raj ,&nbsp;Bhupendra Sunil Mali ,&nbsp;Bhuvnesh Kumar ,&nbsp;Chandra Sen Singh ,&nbsp;Gaurav Kumar Nainawat","doi":"10.1016/j.upstre.2023.100090","DOIUrl":"https://doi.org/10.1016/j.upstre.2023.100090","url":null,"abstract":"<div><p>The worldwide economic shock caused by the COVID-19 outbreak has widespread and dramatic effects on the energy sector <span>[1]</span>. The World Health Organization (WHO) declared the COVID-19 outbreak as a pandemic by early March 2020, which resulted in the imposition of partial to complete lockdown in almost all countries and territories worldwide. This unprecedented shock has led oil and gas markets through a strong supply and trade adjustment, resulting in historically low spot prices and a drastic fall in demand <span>[1]</span>. Since the oil and gas supply chain is very dynamic in nature, the disturbances in maintenance operations and routine work in the oil and gas industry may result in heavy disruptions in the oil and gas industry by affecting the various areas like workforce, production, and storage in the supply chain [<span>1</span>,<span>2</span>].</p><p>This study is oriented towards the comprehensive study of the upstream oil and gas supply chain, and briefly discusses the complete oil gas supply chain. We have investigated the disruption in the supply chain based on the comparative study of the pre-pandemic and post-pandemic situations. The most affected areas of the supply chain due to the disruptions are termed as 'Hotspots' and these disruptions are imitated by developing a model in Stella software, implementing the system dynamics approach. Further, the model has worked for one fiscal year by providing data input of oil/gas prices, current and forecasted demand and impact of COVID -19 is analysed.</p></div>","PeriodicalId":101264,"journal":{"name":"Upstream Oil and Gas Technology","volume":"11 ","pages":"Article 100090"},"PeriodicalIF":0.0,"publicationDate":"2023-09-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"49733792","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"A parallel viscoplastic multiscale reservoir geomechanics simulator","authors":"Mateus O. de Figueiredo ,&nbsp;Luis Carlos de Sousa Junior ,&nbsp;Jose R.P. Rodrigues ,&nbsp;Leandro B. dos Santos ,&nbsp;Leonardo S. Gasparini ,&nbsp;Ricardo F. do Amaral ,&nbsp;Rafael J. de Moraes","doi":"10.1016/j.upstre.2023.100095","DOIUrl":"https://doi.org/10.1016/j.upstre.2023.100095","url":null,"abstract":"<div><p><span><span>Reservoir geomechanics<span> has already proven to play an important role in reservoir management studies. However, the computational costs of these studies usually hinders a thorough evaluation of geomechanical effects. In this paper, we present the development of a massively parallel, multiscale reservoir geomechanics simulator currently in use on industry-grade geomechanical studies. The viscoplastic formulation allows for accurate modelling of the geomechanics effects, at the same time that results on an efficient </span></span>computational model<span>. The massively parallel distributed memory implementation of a linear system framework takes the most advantage of high performance computing (HPC) infrastructures, making use of clusters of multicore nodes. A Preconditioned Conjugate Gradient solver is implemented based on this framework. An additive, coarse-space preconditioner, based on the Multiscale Finite Element (MSFE) method, allows for an efficient, fit-for-purpose, linear system solution strategy. Because the viscoplastic formulation results on a </span></span>symmetric system<span><span><span> matrix that does not change across the simulation in time (only the right hand side does), the MSFE basis-function can be built only once, hence avoiding expensive computations. Our reservoir geomechanics simulator is capable of simulating stress and strain behaviour on large real field, geologically complex, case applications, e.g. from the Brazilian pre-salt. We present different studies, which involve the investigation of geomechanical effects, namely, </span>subsidence<span>, thermomechanics and cap rock integrity. In these studies, we demonstrate the scalability of the simulator in real field models with up to almost 100 million elements, running on up to more than 600 computing cores. The usage of state-of-the-art simulation approaches, combined with modern HPC strategies, enables reservoir geomechanics studies which were once hampered by computational limitations. This implementation will also allow for even more computationally intensive workflows which require many simulations, e.g. </span></span>uncertainty quantification.</span></p></div>","PeriodicalId":101264,"journal":{"name":"Upstream Oil and Gas Technology","volume":"11 ","pages":"Article 100095"},"PeriodicalIF":0.0,"publicationDate":"2023-09-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"49734072","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Dynamics of pump jacks with theories and experiments","authors":"Sheldon Wang ,&nbsp;Lynn Rowlan ,&nbsp;Dennis Cook ,&nbsp;Carson Conrady ,&nbsp;Ross King ,&nbsp;Carrie Anne Taylor","doi":"10.1016/j.upstre.2023.100097","DOIUrl":"https://doi.org/10.1016/j.upstre.2023.100097","url":null,"abstract":"<div><p><span>In this paper, we revisit the issues related to dynamics and mechanisms of the pump jack as a surface unit of the sucker rod pumping systems. In particular, we employ both the traditional study methods based on trigonometric relationships and current Newton-Raphson iteration based general solution techniques for the sets of nonlinear governing equations of angles within the four-bar linkages. The nonlinear computational methods enable the study of transient behaviors of pump jacks with non-uniform motor speeds and further analytical studies of the positions, velocities, and accelerations as well as the polish rod force and </span>motor torque<span><span><span> in comparison with the actual experimental measures documented in Echometer TAM software and other case studies. These current nonlinear approaches have paved a way for more in-depth studies of the entire downhole system as a specific viscoelastic dynamical system with respective stiffness and </span>damping coefficients<span> for individual wells. In this study, we also identify a common misunderstanding about the structural unbalance B as illustrated in API Specification 11E Page 47 which must be multiplied by the sine function of the </span></span>polar angle of the Walking beam measured from its horizontal position. This key finding has been confirmed and validated with the comparison between results from both traditional and proposed nonlinear approaches and experimentally measured data collected by Echometer equipment and TAM software.</span></p></div>","PeriodicalId":101264,"journal":{"name":"Upstream Oil and Gas Technology","volume":"11 ","pages":"Article 100097"},"PeriodicalIF":0.0,"publicationDate":"2023-09-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"49711921","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}