P. Delle Site , B. González Hernández , T. Krishnamurthy , D. Shingo Usami , Q. Zhang
{"title":"A joint trade and mode chain choice modelling framework with application to Italy","authors":"P. Delle Site , B. González Hernández , T. Krishnamurthy , D. Shingo Usami , Q. Zhang","doi":"10.1016/j.trpro.2026.02.079","DOIUrl":"10.1016/j.trpro.2026.02.079","url":null,"abstract":"<div><div>The needs of governments of European countries in the area of goods mobility include prediction, in base year and in policy scenarios, of monetary trade flows as well as weight transport flows by mode chain. The models and datasets that can be used are reviewed. For trade flows, the structural gravity model, which is standard for international trade analysis. For transport flows by mode chain, the Logit model. Joint non-survey calibration of the gravity and Logit models is feasible on the basis of Eurostat transport data. Regional Input-Output tables as well as travel time, cost and route models provide the needed inputs. Aggregation of flows considers the sectors of solid bulk, liquid bulk, and container and general cargo. Price indices needed to convert monetary flows into weight flows in the prediction stage are obtained from Eurostat data. The proposed approach is applied to Italy.</div></div>","PeriodicalId":101261,"journal":{"name":"Transportation Research Procedia","volume":"95 ","pages":"Pages 624-631"},"PeriodicalIF":0.0,"publicationDate":"2026-01-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"147551846","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Travel Preferences Among Car Drivers At Urban And Regional Multimodal Mobility Hubs: A Stated Choice Experiment","authors":"Valeria Caiati , Marise Zuurbier , Soora Rasouli , Eleni Charoniti","doi":"10.1016/j.trpro.2026.02.035","DOIUrl":"10.1016/j.trpro.2026.02.035","url":null,"abstract":"<div><div>Multimodal mobility hubs are emerging as an effective solution for integrating various transport modes and reducing reliance on private cars. Their successful design and implementation require a thorough understanding of factors affecting user preferences and behaviors concerning the hubs and the transport modes they offer. This study used a stated choice experiment to examine the travel preferences of car drivers in the Netherlands, distinguishing between urban and regional hubs. The design included hub characteristics, mode attributes, and contextual variables. The results from an error component multinomial logit models show that private cars remain the preferred mode when offered either type of hubs. Factors like sunny weather, shorter travel distances, and free parking at hubs increased hub attractiveness. Buses and trains were preferred in urban and regional hubs, respectively, compared to shared e-bike, share e-scooter and shared car. Younger, highly educated, and middle-income respondents show greater inclination toward shared modes, indicating a promising target group for mobility hub adoption.</div></div>","PeriodicalId":101261,"journal":{"name":"Transportation Research Procedia","volume":"95 ","pages":"Pages 273-280"},"PeriodicalIF":0.0,"publicationDate":"2026-01-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"147551878","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
José Holguín-Veras, Elias S. Goodrich, Andres Regal
{"title":"Should the City Logistics community focus on e-commerce freight traffic?","authors":"José Holguín-Veras, Elias S. Goodrich, Andres Regal","doi":"10.1016/j.trpro.2026.04.099","DOIUrl":"10.1016/j.trpro.2026.04.099","url":null,"abstract":"<div><div>This paper analyzes the spatial distribution of Business-to-Business (B2B) and Business-to-Consumer (B2C) freight vehicle-trips in the urban core of the City of Boston, Massachusetts. Amazon last-mile e-commerce (B2C) deliveries-per-stop data are combined with a new generation of econometric demand models that estimate B2B and B2C fulfillments (shipments and deliveries) using readily available zonal census variables (employment, median household income, and population) to obtain estimates of fulfillments and resulting B2C traffic. Sensitivity analysis is then performed for various B2B consolidation scenarios to determine the location(s) within the area where B2B traffic outpaces B2C traffic. The results of this show that B2B traffic dominates in the urban core, which is consistent with the concentration of commercial establishments and activities there – while secondary urban areas and suburbs tend to receive larger shares of B2C traffic. These results are crucial for the development of geographically targeted policies by planners and decision-makers who have recently placed an outsized emphasis on e-commerce in the densest parts of cities. Traffic generation differences, consolidation, and urban form are directly highlighted in this work.</div></div>","PeriodicalId":101261,"journal":{"name":"Transportation Research Procedia","volume":"98 ","pages":"Pages 12-19"},"PeriodicalIF":0.0,"publicationDate":"2026-01-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"148531882","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"OA","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Modelling and Integrating On-Demand Delivery of Prepared Meals and Groceries using an Agent-Based Simulation Framework","authors":"Natalia Zuniga-Garcia, Krishna Murthy Gurumurthy, Abdelrahman Ismael, Olcay Sahin, Joshua Auld","doi":"10.1016/j.trpro.2026.04.136","DOIUrl":"10.1016/j.trpro.2026.04.136","url":null,"abstract":"<div><div>Growing technology access and effects of social distancing policies during the COVID-19 pandemic significantly increased the demand for online purchases. Understanding the potential mobility impacts of e-commerce operations at a regional level becomes relevant. This study uses data from multiple sources to develop a modeling framework for on-demand delivery (ODD) operations for meals and groceries in POLARIS, a large-scale activity-based travel demand model and mesoscopic traffic simulator. Deliveries are simulated following similar characteristics of taxi operations, allowing for orders to be picked up by individuals using personal vehicles. The demand is modeled from a behavioral survey using a zero-one inflated Beta model aiming to address the excess of zeros in the data and the presence of ones. Estimations for low and high e-commerce demand are analyzed for operations in Austin, Texas, from 2020 to 2040 as the population grows by 60%. It is expected that ODD operations will increase in future years, leading to a significant increase in operational vehicle miles traveled (VMT). Although substitutionary trips come from exchanging a percentage of driving activities for e-commerce operations, a significant part of delivery operations corresponds to empty miles with driver repositioning or idling. Additional analysis of the effect of delivery policies for short trips indicates that nearly half of the VMT can be done using low-emission vehicles like bicycles.</div></div>","PeriodicalId":101261,"journal":{"name":"Transportation Research Procedia","volume":"98 ","pages":"Pages 307-314"},"PeriodicalIF":0.0,"publicationDate":"2026-01-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"148532181","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"OA","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Dry addition of crumb rubber in dense graded friction course mixtures: Effects on stiffness, fatigue, and rutting resistance","authors":"Filippo Giammaria Praticò, Vamsi Navya Krishna Mypati","doi":"10.1016/j.trpro.2026.07.052","DOIUrl":"10.1016/j.trpro.2026.07.052","url":null,"abstract":"<div><div>The performance improvement of asphalt mixtures using crumb rubber (CR) is widely acknowledged, especially through the wet process. However, the dry addition method, while more economical and environmentally beneficial, remains less explored. This study examines the effect of different CR contents (0 per cent, 1 per cent, and 2 per cent by weight of aggregate) on the mechanical behaviour of DGFC mixtures using the dry process. Key performance parameters include air voids (AV), stiffness modulus (E at 25 degrees Celsius), fatigue life (N1 at 10 degrees Celsius and N2 at 10 degrees Celsius), and rutting resistance (Rt at 25 degrees Celsius). The experimental results reveal that increasing CR content significantly reduces air voids and the stiffness modulus, with a drop of more than 50 per cent in stiffness. Fatigue life decreases drastically beyond 1 per cent CR, with more than 80 per cent reduction in N1 and N2 values at 2 per cent CR. Rutting resistance also declines by 33.5 per cent. These findings suggest that although CR enhances flexibility, excessive amounts compromise structural performance and can lead to controversial results. An optimal CR range of 1 to 1.5 per cent is recommended for achieving a balance between durability and mechanical effectiveness. This study contributes new evidence on dry process rubberised asphalt mixtures and their performance thresholds in sustainable pavement engineering.</div></div>","PeriodicalId":101261,"journal":{"name":"Transportation Research Procedia","volume":"99 ","pages":"Pages 250-258"},"PeriodicalIF":0.0,"publicationDate":"2026-01-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"148806735","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"OA","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Sara Carlucci, Lorenzo Paolo Ingrassia, Fabrizio Cardone, Francesco Canestrari
{"title":"Performance characterization of warm mix asphalt for porous wearing courses and base layers produced with highly polymer modified bitumen","authors":"Sara Carlucci, Lorenzo Paolo Ingrassia, Fabrizio Cardone, Francesco Canestrari","doi":"10.1016/j.trpro.2026.07.057","DOIUrl":"10.1016/j.trpro.2026.07.057","url":null,"abstract":"<div><div>Increasing road traffic demands have led to the need for longer lasting, higher performing pavements. To improve pavement durability, extend its service life and reduce maintenance costs, highly polymer modified bitumen (HiPMB) containing ad hoc styrene polymers has been introduced to the market. The objective of this study is to evaluate the performance of warm mix asphalt (WMA) produced with HiPMB to be used for porous wearing courses and base layers of motorway pavements. Specifically, three HiPMBs (two available on the European market and one under development, each one with styrene polymer content ≥ 7.5%) are examined and compared with a reference polymer modified bitumen (PMB) containing 3.8% SBS polymers. The porous mixtures were subjected to workability analysis, indirect tensile strength (ITS), semi-circular bending (SCB) and Cantabro tests (all carried out after both dry and wet conditioning). As for the base mixtures, testing included indirect tensile stiffness modulus (ITSM) and indirect tensile fatigue tests (ITFT), in addition to workability and ITS analysis. The results indicate that, in some cases, asphalt mixtures produced with HiPMB perform better than asphalt mixtures produced with PMB. The issues in terms of adhesion with aggregates observed for the HiPMBs could explain some penalized performance characteristics of the related mixtures.</div></div>","PeriodicalId":101261,"journal":{"name":"Transportation Research Procedia","volume":"99 ","pages":"Pages 290-297"},"PeriodicalIF":0.0,"publicationDate":"2026-01-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"148806740","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"OA","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Lessons learnt from the monitoring of high embankments founded on soft soils","authors":"Pavel Žvanut","doi":"10.1016/j.trpro.2026.07.047","DOIUrl":"10.1016/j.trpro.2026.07.047","url":null,"abstract":"<div><div>The construction of the motorway network in Slovenia takes place in different geotechnical conditions. Some high embankments had to be built on very compressible subsoil with low bearing capacity and low permeability, so appropriate measures to increase the stability and the consolidation rate of the subsoil had to be foreseen in the design. Since large settlements were expected in these cases, geotechnical monitoring systems of the embankments and the subsoil beneath them were established in order to precisely monitor the deformation behaviour of the embankments during and after construction. Two methods were used to obtain settlement profiles at various locations under the embankments. In addition to the conventional settlement plates, which were installed transversely to the embankments on different profiles, measuring tubes for measuring settlements with a hydrostatic profile gauge (HPG) were also installed on some selected profiles. The results of the comparison of settlement development on different profiles are presented on the examples of two selected embankments located on various motorway sections. It is shown that the settlement values observed on the individual settlement plates, which were placed very close to the measuring tubes were very similar to those measured by the HPG, with the latter giving significantly better results as the entire settlement lines were measured. It can be also seen that the development of soil settlements on the selected profiles was very different, which is the consequence of the heterogeneity and different compressibility of the soil under the embankments. The obtained results can be of great help in the future design and construction of high embankments in comparable geotechnical conditions.</div></div>","PeriodicalId":101261,"journal":{"name":"Transportation Research Procedia","volume":"99 ","pages":"Pages 210-217"},"PeriodicalIF":0.0,"publicationDate":"2026-01-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"148806793","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"OA","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Theoretical quantification of sustainable concrete options for airport pavements","authors":"Loretta Newton-Hoare, Greg White","doi":"10.1016/j.trpro.2026.07.062","DOIUrl":"10.1016/j.trpro.2026.07.062","url":null,"abstract":"<div><div>Rigid airport pavement concrete mixtures have traditionally been produced with virgin natural aggregates and ordinary Portland cement, limiting opportunities for sustainable material use in Australia. However, growing emphasis on sustainability and carbon reduction has highlighted the need to incorporate industrial by-products and recycled materials into airport pavement concrete. This research estimated the environmental and financial cost of airport pavement concretes containing supplementary cementitious materials, recycled concrete aggregate, and blast furnace slag aggregates, which are materials already permitted by some road and airport pavement specifications. Results showed that ordinary Portland cement concrete had the highest embodied carbon, while geopolymer cement concrete was associated with an 83% carbon reduction, albeit at a 10% cost premium. It was concluded that significant embodied carbon and cost savings can be achieved in concrete mixtures for airport pavements in Australia, just by allowing the use of materials already allowed by other jurisdictions. For example, mixtures containing high proportions of supplementary cementitious materials permitted under U.S. specifications achieved carbon reductions of 45% and 41%, with financial savings of 4% and 15% respectively. Furthermore, a 40% fly ash mixture, already allowed by some Australian and U.K. specifications, reduced embodied carbon by 37% and cost by 5%. Additionally, while recycled concrete aggregate and blast furnace slag aggregates had slightly higher embodied carbon than virgin aggregates, they can deliver broader sustainability benefits by conserving natural resources, reducing landfill demand and reducing cost. These findings demonstrate the importance of specifications that allow waste and recycled materials and their contribution to sustainable airport pavement practice.</div></div>","PeriodicalId":101261,"journal":{"name":"Transportation Research Procedia","volume":"99 ","pages":"Pages 334-342"},"PeriodicalIF":0.0,"publicationDate":"2026-01-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"148806802","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"OA","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
M. Al Bacha, O. Chupin, M.-L. Nguyen, P. Hornych, J. Blanc
{"title":"Considering a friction-based approach to model asphalt pavement interfaces","authors":"M. Al Bacha, O. Chupin, M.-L. Nguyen, P. Hornych, J. Blanc","doi":"10.1016/j.trpro.2026.07.069","DOIUrl":"10.1016/j.trpro.2026.07.069","url":null,"abstract":"<div><div>The behavior of the interfaces in asphalt pavements is complex, and the contact between asphalt concrete (AC) layers cannot be considered perfectly bonded, as assumed in most pavement design methods. Full-scale experiments have demonstrated that interfaces can experience sliding, with horizontal displacement jumps, even in the presence of tack coats. This loss of bonding leads to an increase of tensile strains at the bottom of the surface layer, accelerating damage. While elastic or viscoelastic thin-layer models have been used to represent interface behavior, they have proven inadequate in simulating recent full-scale tests performed at Université Gustave Eiffel (France). A different approach based on the plastic Coulomb’s friction law is considered here. This approach proves to be more effective than classical methods to accurately compute the mechanical response of the aforementioned full-scale tests, particularly at high temperature. This is illustrated by comparing strain gauge measurements recorded during these tests with the strain computed using the different approaches.</div></div>","PeriodicalId":101261,"journal":{"name":"Transportation Research Procedia","volume":"99 ","pages":"Pages 394-401"},"PeriodicalIF":0.0,"publicationDate":"2026-01-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"148806867","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"OA","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Even road surfaces – A way to extend pavement service life","authors":"Alexandra Spilker, Marko Wieland, Jürgen Schmidt","doi":"10.1016/j.trpro.2026.07.083","DOIUrl":"10.1016/j.trpro.2026.07.083","url":null,"abstract":"<div><div>The normative service life of pavement structures is calculated based on parameters such as traffic loading and expected axle or wheel loads. Since unevenness causes vertical acceleration and thus higher dynamic wheel loads, the static vehicle load is corrected by a general impact factor. This paper presents the results of a theoretical potential analysis investigating the influence of the impact factor on the calculated service life and remaining service life of concrete pavements, conducted within the framework of the “Texplus” research project. The results indicate that even minor reductions in the impact factor achieved through improvements in surface evenness may lead to a considerable extension of pavement service life, in some cases by up to 10 years. Building on the theoretical considerations, a measurement-based approach was developed that enables the generation of an empirical data basis for analysing the actual temporal development of surface evenness as well as dynamic wheel loads within the motorway network. For this purpose, measurement data routinely collected as part of the condition assessment of the motorway network were specifically analysed. This approach may, in the future, enable both the consideration of improved initial surface evenness in computational pavement design and the incorporation of real variations as well as extreme individual events into the prediction of the remaining service life of existing pavement sections, thereby allowing the quantitative assessment of the effects of evenness improvements.</div></div>","PeriodicalId":101261,"journal":{"name":"Transportation Research Procedia","volume":"99 ","pages":"Pages 505-511"},"PeriodicalIF":0.0,"publicationDate":"2026-01-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"148806924","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"OA","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}