Avicenna Journal of Environmental Health Engineering最新文献

{"title":"The Potential Effectiveness of Probiotic-Based Sanitation Procedures in Nosocomial Infection Control: A Review Article","authors":"Masoumeh Moghaddam Arjmand","doi":"10.34172/ajehe.2019.16","DOIUrl":"https://doi.org/10.34172/ajehe.2019.16","url":null,"abstract":"The sanitation of the hospital environment for the purpose of preventing the transmission of nosocomial infections has a major role in reducing the infection of hospitalized patients with the bacteria living on hospital surfaces. The excessive use of chemical detergents in recent decades has led to microbial resistance in nosocomial infectious bacteria. Researchers’ attention has therefore been drawn to the use of probiotics for disinfecting hospital surfaces. The present study was conducted to assess the potential effectiveness of probiotic products in controlling the contamination of inert surfaces in the environment and medical instruments in health centers and investigate the claim that the antagonistic property of probiotic microorganisms offers an effective method for controlling nosocomial infections and a suitable alternative to conventional disinfection methods. A search was carried out for relevant articles published from 2000 to 2018 in databases including ISI, PubMed, Scopus, EMBASE, and Google Scholar, using the keywords \"nosocomial infections\", \"disinfection\", \"sanitation\", \"probiotics\" and \"infected surfaces\". The articles published from 2000 to 2018 confirmed the greater effectiveness of probiotic disinfection (by up to 90%) compared to conventional chemical disinfection in controlling nosocomial infections. Nevertheless, more extensive studies are needed on probiotics to determine the possibility of replacing good bacteria with bad bacteria in future decades.","PeriodicalId":8672,"journal":{"name":"Avicenna Journal of Environmental Health Engineering","volume":" ","pages":""},"PeriodicalIF":0.0,"publicationDate":"2019-12-31","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"43618939","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Adsorption of Nickel and Chromium From Aqueous Solutions Using Copper Oxide Nanoparticles: Adsorption Isotherms, Kinetic Modeling, and Thermodynamic Studies","authors":"R. Hosseini, M. Sayadi, H. Shekari","doi":"10.34172/ajehe.2019.09","DOIUrl":"https://doi.org/10.34172/ajehe.2019.09","url":null,"abstract":"The research was conducted with an aim to assess the efficiency of copper oxide nanoparticles as an adsorbent to remove Ni and Cr. The effect of pH, adsorbent dosage, contact time, initial concentration of metals (Ni and Cr) on the adsorption rate was evaluated and removal of these elements from aqueous solutions was measured using Atomic Absorption Spectrum System (Conter AA700). Moreover, the kinetic and isotherm besides thermodynamic adsorption models were assessed. The highest Ni and Cr removal rate occurred at an optimal pH of 7, and an initial concentration of 30 mg/L, a time period of 30 minutes, and 1 g/L of copper oxide nanoparticles. In fact, with the increase of adsorbent dosage and contact time, the removal efficiency increased and with initial concentration increase of Ni and Cr ions, the removal efficiency reduced. The correlation coefficient of isotherm models viz. Langmuir, Freundlich, Temkin, Redlich-Peterson, and Koble-Corrigan showed that Ni and Cr adsorption via copper oxide nanoparticles better follows the Langmuir model in relation to other models. The results showed that kinetic adsorption of Ni and Cr via copper oxide nanoparticles follows the second order pseudo model with correlation coefficients above 0.99. In addition, the achieved thermodynamic constants revealed that the adsorption process of metals (i.e., Ni and Cr) via copper oxide nanoparticles was endothermic and spontaneous and the reaction enthalpy values for these metals were 17.727 and 11.862 kJ/mol, respectively. In conclusion, copper oxide nanoparticles can be used as effective and environmentally compatible adsorbents to remove Ni and Cr ions from the aqueous solutions","PeriodicalId":8672,"journal":{"name":"Avicenna Journal of Environmental Health Engineering","volume":"6 1","pages":"66-74"},"PeriodicalIF":0.0,"publicationDate":"2019-12-31","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"43871501","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Health Impacts of Exposure to Heavy Metals in Some Selected Lipstick Products Available in Mashhad, Iran","authors":"H. Alidadi, Sima Zamand, A. Najafpoor, H. Heidarian, A. Dehghan, M. Sarkhosh, Vahid Taghavimanesh","doi":"10.34172/ajehe.2019.15","DOIUrl":"https://doi.org/10.34172/ajehe.2019.15","url":null,"abstract":"This study aimed to investigate the levels of heavy metals in the lipstick products. In general, 30 samples were randomly selected from Mashhad markets. Analysis of variance (ANOVA) and t test were used to compare color and price variables. Based on the results, the mean concentrations of studied elements were as follows: Cd (ND-0.52 µg/g), Cr (0.25-76.35 µg/g), Ni (ND-20.12 µg/g), Zn (ND-224.22 µg/g), Pb (ND-44.77 µg/g), and Hg (ND-0.32 µg/g). The presence of toxic metals in the samples, and on the other hand, continuous use and unintended ingestion of these metals can lead to their biological accumulation in the human body, thereby causing the development of different diseases. Hence, it deems necessary to apply suitable actions for the improvement of quality control over these products.","PeriodicalId":8672,"journal":{"name":"Avicenna Journal of Environmental Health Engineering","volume":"6 1","pages":"113-118"},"PeriodicalIF":0.0,"publicationDate":"2019-12-31","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"44046172","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Decreasing Plant Abiotic Stress in the Soil Treated with Sewage Sludge Using Piriformospora indica Fungus and Multi Walled Carbon Nanotubes","authors":"A. Baghaie, Mohammad Fereydoni","doi":"10.34172/ajehe.2019.05","DOIUrl":"https://doi.org/10.34172/ajehe.2019.05","url":null,"abstract":"Today, finding suitable methods to decrease plant abiotic stress such as heavy metals or salinity is very necessary in arid and semi-arid regions. Thus, this research was conducted as a factorial experiment in the layout of a completely randomized block design to evaluate the role of Piriformospora indica fungus and multi-walled carbon nanotubes (MWCNTs) on decreasing plant abiotic stress in the soil treated with lead (Pb)-polluted sewage sludge. The treatment consisted of applying sewage sludge at the rates of 0, 15, and 30 t/ha, 3 levels of cadmium spiked in to the applied sewage sludge (0, 800 and 1600 mg Pb/kg), as well as 0%, 0.5%, and 1.5% (W/W) MWCNTs in the presence and absence of P. indica. The plant used in this experiment was barely. After 90 days of the experiment, the plant was harvested and its Pb concentration was measured using atomic absorption spectroscopy. Applying 0.5 and 1% (W/W) MWCNTs in the soil treated with 15 t/ha sewage sludge significantly decreased plant Pb concentration by 8.1% and 12.3%, respectively. In addition, the presence of P. indica had significant effects on decreasing plant Pb concentration since the lowest plant Pb concentration was observed in soil amended with 30 t/ha sewage sludge (800 mg Pb/kg) by receiving 1.5% (W/W) MWCNTs in the presence of P. indica. The results of this study showed that applying MWCNTs has significant effects on decreasing soil heavy metals or soil salinity that is a positive point in environmental studies.","PeriodicalId":8672,"journal":{"name":"Avicenna Journal of Environmental Health Engineering","volume":" ","pages":""},"PeriodicalIF":0.0,"publicationDate":"2019-06-30","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"44084934","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"The Relevance of Isotherm and Kinetic Models to Chlorophenols Adsorption: A Review","authors":"Z. N. Garba","doi":"10.34172/AJEHE.2019.08","DOIUrl":"https://doi.org/10.34172/AJEHE.2019.08","url":null,"abstract":"The derivatives of phenols are among the most widely used chemicals in day-to-day life, which lead to water contamination by chlorophenols (CPs). These compounds belong to a class of those widely used chemicals that increase global concern about environmental protection due to their recalcitrant nature. Adsorption process has been employed for the removal of CPs from contaminated water out of many methods of wastewater treatment. This is due to its insensitivity to toxic substances, effectiveness, universal nature, fast kinetics, as well as the ease of operation and its simplicity in the design and applicability. Thus, this study compared the adsorption isotherm models such as linear and nonlinear and well discussed the fundamental characteristics, modelling, and mathematical derivations. Finally, the study highlighted and addressed the role of different isotherm models that were used in describing the adsorptive removal of CPs using various adsorbents.","PeriodicalId":8672,"journal":{"name":"Avicenna Journal of Environmental Health Engineering","volume":" ","pages":""},"PeriodicalIF":0.0,"publicationDate":"2019-06-29","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"45726819","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Investigation of the Efficiency of Phosphorus Removal Using Anionic Resins From the Continuous Flow in the Waste Stabilization Pond Outlet: A Case Study of Kaboodrahang Wastewater Treatment Plant","authors":"Ali Akbar Rahmani Sarmazdeh, M. Leili","doi":"10.34172/AJEHE.2019.03","DOIUrl":"https://doi.org/10.34172/AJEHE.2019.03","url":null,"abstract":"This research mainly aimed to investigate phosphorus removal from stabilization pond effluent by using anionic resins in the continuous flow mode of operation due to high amounts of phosphorus in the wastewater treatment plant effluent of Kaboodrahang, western Iran, as well as the violation from a prescribed effluent standard to discharge receiving the surface waters. For this purpose, the pilot was made of a plexiglass cylinder and other equipment such as pump and other accessories, as well as Purolite A-100 resin. The reactor effects on the desired study parameters were assessed in two warm and cold seasons. The results showed that the phosphorus concentrations reduced from 7-10 mg/L to 4-7 mg/L and the rate of phosphorus removal was higher in the hot season compared to the cold season. Moreover, the optimum temperature and pH were obtained 21ºC and 8.5, respectively. The mean inlet biological oxygen demand (BOD) was 150 mg/L for both warm and cold seasons, where the highest removal rate of 17% was obtained in the cold season. The mean chemical oxygen demand concentration of the pilot was 250 mg/L for both seasons, and the highest removal rate was observed in the cold season with an efficiency of 18%. Regarding the total suspended solids with the mean inlet of 230 mg/L, the highest removal efficiency was obtained 6% in the warm season.","PeriodicalId":8672,"journal":{"name":"Avicenna Journal of Environmental Health Engineering","volume":"1 1","pages":""},"PeriodicalIF":0.0,"publicationDate":"2019-06-29","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"41880451","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Optimization of Coagulation-Flocculation Process of Landfill Leachate by Tin (IV) Chloride Using Response Surface Methodology","authors":"A. A. Hamidi, Syed Zainal Sharifah Farah Fariza, Alazaiza Motasem Y.D","doi":"10.34172/AJEHE.2019.06","DOIUrl":"https://doi.org/10.34172/AJEHE.2019.06","url":null,"abstract":"Landfill leachate is highly polluted and generated as a result of water infiltration through solid waste produced domestically and industrially. This study investigated the applicability of the response surface methodology (RSM) to optimize the removal performances of chemical oxygen demand (COD), color, and suspended solids (SS) from landfill leachate by coagulation process using Tin tetrachloride pentahydrate. The leachate samples were collected from Alor Pongsu Landfill (APLS) in Perak, Malaysia. Before starting the experiments, general characterization was carried out for raw leachate samples to investigate their physical and chemical properties. The effects of the dosage and pH of SnCl4 on the removal performances were evaluated as well. An ideal experimental design was performed based on the central composite design (CCD) by RSM. In addition, this RSM was used to evaluate the effects of process variables and their interaction toward the attainment of their optimum conditions. The statistical design of the experiments and data analysis was resolved using the Design-Expert software. Further, the range of coagulant dosage and pH was selected based on a batch study which was conducted at 13000 mg/L to 17000 mg/L of SnCl4 and pH ranged from 6 to 10. The results showed that the optimum pH and dosage of SnCl4 were 7.17 and 15 g/L, respectively, where the maximum removal efficiency was 67.7% for COD and 100% for color and SS. The results were in agreement with the experimental data with a maximum removal efficiency of 67.84 %, 98.6 %, and 99.3%, for COD, color, and SS, respectively. Overall, this study verified that the RSM method was viable for optimizing the operational condition of the coagulation-flocculation process.","PeriodicalId":8672,"journal":{"name":"Avicenna Journal of Environmental Health Engineering","volume":" ","pages":""},"PeriodicalIF":0.0,"publicationDate":"2019-06-29","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"44559785","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Physico-chemical, Calorific, and Emission Performance of Briquettes Produced from Maize Cob, Sugarcane Bagasse, and Polythene Composites","authors":"Owolabi Ayowole Awwal, Omoniyi K. Israel, Z. Yashim","doi":"10.34172/AJEHE.2019.07","DOIUrl":"https://doi.org/10.34172/AJEHE.2019.07","url":null,"abstract":"Global waste generation has been a challenging issue that vastly affects humans and the environment. The conversion of a vast amount of agricultural and polymeric waste to briquette may bridge the energy deficit and environmental pollution issues in developing economies. On the other hand, the utilization of biomass waste or residue as an energy source could help alleviate dependence on imported energy and its use continues to be a topical issue in both developing and developed countries. Over the years, biomass has been an important source of generating energy due to its relative availability and the ability to meet both heat and electricity demands by contributing towards international commitments so as to minimize environmental degradation and maximize environmental, social, and economic sustainability. The benefits of compacted biomass compared to all other types of biofuel include its low transportation and storage costs, uniform product quality such as constant humidity content, and high mass fluency. Moreover, fuel wood and biomass residues have low combustion efficiency, posing environmental and health hazards. This research studies the performance of briquettes produced from maize cob, sugarcane bagasse, and polythene waste composites. The briquettes were agglomerated using cassava starch binder (CSB) and plantain peel binder (PPB) at binder concentrations of 4%, 12%, and 20%. Each briquette was characterized in terms of proximate analysis, calorific value, ultimate analysis and micro-structure by scanning electron microscopy. The briquettes had a moisture content of 5.39-12.10%, volatile matter of 10.15- 23.08%, ash content of 10.29-24.63%, fixed carbon content of 55.84-77.10%, calorific value of 9.04-28.14 MJ/kg, carbon content of 77%-8405%, nitrogen content of 0.875-1.05%, and sulphur content of 0.4-0.7%. The results obtained from this study revealed that briquette produced using CSB at binder concentration of 4% had the best properties required for biomass fuel briquette compared to briquette produced using PPB and suggested its use for the production of environmentally friendly solid fuel.","PeriodicalId":8672,"journal":{"name":"Avicenna Journal of Environmental Health Engineering","volume":" ","pages":""},"PeriodicalIF":0.0,"publicationDate":"2019-06-29","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"46961442","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Removalof Cephalexin From Aqueous Solutions Using Magnesium Oxide/Granular Activated Carbon Hybrid Photocatalytic Process","authors":"A. Seidmohammadi, Mina Bahrami, Sana Omari, F. Asadi","doi":"10.34172/AJEHE.2019.04","DOIUrl":"https://doi.org/10.34172/AJEHE.2019.04","url":null,"abstract":"In the present study, magnesium oxide/granular activated carbon (MgO/GAC) composite as a catalyst was synthesized using the sol-gel method and its catalytic potential was investigated in the presence of ultraviolet (UV) irradiation for the removal of cephalexin (CLX) in a batch mode reactor. Then, the characterization of the MgO/GAC composite was determined by X-ray diffraction (XRD) and scanning electron microscopy (SEM). Next, the effect of operational parameters was evaluated, including the pH of the solution (3-11), the dosage of composite (1-6 g/L), initial CLX concentration (20-100 mg/L), and contact time (10-60 minutes). The maximum CLX degradation with an initial concentration of 20 mg/L was as high as 98% at pH=3, 4 g/L of MgO/GAC composite with UV irradiation within 60-minute contact time. In addition, the removal process of CLX could be described by the pseudofirst-order kinetic. Further, the chemical oxygen demand (COD) and total organic carbon (TOC) removal rate were 78% and, 62.3% in optimum conditions, respectively. The results indicated that the UV/MgO/GAC hybrid photocatalytic process can be considered as an efficient alternative for treating the wastewater containing CLX.","PeriodicalId":8672,"journal":{"name":"Avicenna Journal of Environmental Health Engineering","volume":" ","pages":""},"PeriodicalIF":0.0,"publicationDate":"2019-06-29","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"48442043","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Investigation of Some Qualitative Characteristics of Sludge Produced in Hamadan Wastewater Treatment Plant and Its Application in Agricultural Lands","authors":"R. Shokoohi, S. Moradi, Zhila Ghavami, A. Nadali, Raheleh Amiri","doi":"10.34172/ajehe.2019.01","DOIUrl":"https://doi.org/10.34172/ajehe.2019.01","url":null,"abstract":"In this study, qualitative characteristics of the sludge produced in Hamadan wastewater treatment plant and the feasibility of its application in agricultural lands were investigated. Samples were taken from the primary and secondary sludge and indices such as VS/TS, PH, TKN, COD, TKN, SOUR, Na, Ca, SAR, heavy metals and biological properties (the mean fecal coliform count and the number of parasitic eggs) were measured. The results were compared with the United States Environmental Protection Agency (US EPA) standards (40 FCR-503). The results showed that the VS/TS ratio of the raw sludge was 0.8, 0.55, and 0.55 and that of the secondary sludge was 0.65, 0.28, and 0.32 for fall, winter, and summer, respectively. The average concentration of COD, TKN, SOUR, Na, and Ca for the initial sludge was 51283, 107, 0.50, 609, and 952 and for secondary sludge, it was 35595, 81, 4.90, 306, and 493 mg/L, respectively. The MPN for primary and secondary sludge was determined to be 19.83 × 106 and 186 × 106 , respectively and the average number of parasite eggs in primary and secondary sludge was 7.05 and 7.2 in 4 g of dry solids. Entamoeba coli had the highest number of parasite. The results of this study showed that the highest concentration of heavy metals in the sludge was 21396 mg/kg. The values obtained for the above-mentioned indices and heavy metals were in standards range. The results of this study show that none of the primary and secondary sludge samples has been properly stabilized. The values obtained for biological characteristics of sludge were not in the standard range. Therefore, it was revealed that the use of sludge for agriculture needed more stabilization.","PeriodicalId":8672,"journal":{"name":"Avicenna Journal of Environmental Health Engineering","volume":" ","pages":""},"PeriodicalIF":0.0,"publicationDate":"2019-06-29","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"46532282","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}