Marwa Abdulkareem Mohammed AL-DULAIMI, Mohsen Seyedi
{"title":"Numerical Analysis of Geogrids and Recycled Concrete Aggregate for Stabilizing Road Embankments","authors":"Marwa Abdulkareem Mohammed AL-DULAIMI, Mohsen Seyedi","doi":"10.18280/acsm.470404","DOIUrl":"https://doi.org/10.18280/acsm.470404","url":null,"abstract":"The amplification of urban development and the extension of road networks necessitate a comprehensive understanding of various soil improvement techniques for civil engineering applications. Soil enhancement methods, typically trusted and practical, are pivotal in addressing geotechnical engineering challenges. This study focuses on the numerical evaluation of the efficacy of geogrids and recycled concrete aggregate (RCA) in the stabilization of road embankments. Critical soil properties such as water absorption, soil erosion, and settlement susceptibility are significantly improved through these methods, promoting sustainable land use, environmental conservation, and infrastructure durability. Literature reveals that the use of geogrids or waste materials like RCA contributes effectively to soil layer enhancement. In this investigation, road embankment models, with and without the aforementioned improvements, were developed and assessed under vehicular load conditions. The findings demonstrated that the incorporation of geogrids or RCA significantly bolsters the stability of road embankments. A noteworthy reduction in vertical settlement, up to 45%, was achieved when geogrids and RCA were concurrently utilized in the embankment. This suggests that these methods, individually or in combination, could provide a viable solution for enhancing the performance and stability of road infrastructures. Further research is proposed to explore the long-term performance of these enhancement methods under various environmental and load conditions.","PeriodicalId":7897,"journal":{"name":"Annales De Chimie-science Des Materiaux","volume":"18 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2023-08-31","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"135987702","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Mohammed Akram Ahmed, Ali Kadhim Ibrahim, Nahla Hilal, Ayad S. Aadi, Nadhim Hamah Sor
{"title":"Effects of Coal Ash and Walnut Shell on the Impact Resistance and Mechanical Properties of Eco-Efficient Self-Compacting Concrete","authors":"Mohammed Akram Ahmed, Ali Kadhim Ibrahim, Nahla Hilal, Ayad S. Aadi, Nadhim Hamah Sor","doi":"10.18280/acsm.470402","DOIUrl":"https://doi.org/10.18280/acsm.470402","url":null,"abstract":"ABSTRACT","PeriodicalId":7897,"journal":{"name":"Annales De Chimie-science Des Materiaux","volume":"87 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2023-08-31","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"135782993","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Issam Touil, Hamza Khochmane, Kamel Khounfais, Moussa Khelifa
{"title":"Development and Mechanical Assessment of Corn Flour and Olive Pomace Reinforced Bioplastics","authors":"Issam Touil, Hamza Khochmane, Kamel Khounfais, Moussa Khelifa","doi":"10.18280/acsm.470401","DOIUrl":"https://doi.org/10.18280/acsm.470401","url":null,"abstract":"ABSTRACT","PeriodicalId":7897,"journal":{"name":"Annales De Chimie-science Des Materiaux","volume":"2015 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2023-08-31","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"135989793","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Experimental Analysis of the Mechanical Characteristics of Aluminum Alloys (AlSi8Cu3)","authors":"Mohamed Fnides, Toufik Bensana, Brahim Fnides, Medkour Mihoub","doi":"10.18280/acsm.470403","DOIUrl":"https://doi.org/10.18280/acsm.470403","url":null,"abstract":"ABSTRACT","PeriodicalId":7897,"journal":{"name":"Annales De Chimie-science Des Materiaux","volume":"47 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2023-08-31","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"135987814","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Comparative Performance of SF, PPF and Hybrid Fiber-Reinforced Self-Compacting Lightweight Concrete under Fire Exposure","authors":"Ali Mohammed Abbas, Jinan Jawad Alwash","doi":"10.18280/acsm.470406","DOIUrl":"https://doi.org/10.18280/acsm.470406","url":null,"abstract":"ABSTRACT","PeriodicalId":7897,"journal":{"name":"Annales De Chimie-science Des Materiaux","volume":"40 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2023-08-31","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"135989752","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Ahmed Rafik Belakhdar, Mohamed Salah Dimia, Mohamed Baghdadi, Meriem Bouderradji, Soumia Gherabli, Nail Alaoui
{"title":"Post-Fire Behavior and Repair of Fire-Damaged RC Columns Using Composite Jackets","authors":"Ahmed Rafik Belakhdar, Mohamed Salah Dimia, Mohamed Baghdadi, Meriem Bouderradji, Soumia Gherabli, Nail Alaoui","doi":"10.18280/acsm.470407","DOIUrl":"https://doi.org/10.18280/acsm.470407","url":null,"abstract":"ABSTRACT","PeriodicalId":7897,"journal":{"name":"Annales De Chimie-science Des Materiaux","volume":"10 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2023-08-31","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"135987813","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Characteristics Investigations of Dry Bamboo Ash Fractional Replaced Cement with in M25 Grade Concrete","authors":"Vijayvenkatesh Chandrasekaran","doi":"10.18280/ACSM.450207","DOIUrl":"https://doi.org/10.18280/ACSM.450207","url":null,"abstract":"Received: 24 March 2020 Accepted: 10 August 2020 Most bamboos are used in-house ceiling, Ornament works behavior science of earliest culture regulations. If fresh and dry stages bamboos are equally important, of construction works. Green stage bamboos working process of interlocking formations woodworks and dry stage bamboos are working in support for centering for slabs, tunneling or varies constructional purposes. These papers say about dry bamboos ash to use the sub stained to mixed the partially replaced within 53 grades of cement. In 20, 30, and 40%. And constituent of mixing ratio is M25 grade of concrete (1:1:2). And its process of proper casting of cubes, beams and cylinders to put in to the test analysis for strength, absorption tastings machines and these each types of test result are higher values. Because its better constituent DBA ash mixed with cement substance identical strength attained the concrete cubes, cylinders and beams. And its improved concrete strength and highly interlocking ability of friction bonding into the coarse and fine aggregate of the concrete. And same time its high workability.","PeriodicalId":7897,"journal":{"name":"Annales De Chimie-science Des Materiaux","volume":"2012 1","pages":"153-159"},"PeriodicalIF":0.8,"publicationDate":"2021-04-30","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"82620340","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
A. Boursas, M. Salmi, G. Lorenzini, Hijaz Ahmad, Y. Menni, Djamal Fridja, A. Belkaid
{"title":"Enhanced Heat Transfer by Oil/Multi-Walled Carbon Nano-Tubes Nanofluid","authors":"A. Boursas, M. Salmi, G. Lorenzini, Hijaz Ahmad, Y. Menni, Djamal Fridja, A. Belkaid","doi":"10.18280/ACSM.450201","DOIUrl":"https://doi.org/10.18280/ACSM.450201","url":null,"abstract":"1 Department of Physics, University of M’sila, B.P. 1713, M’sila 28000, Algeria 2 Laboratory of Physics and Chemistry of Materials, University of M’sila, M’sila 28000, Algeria 3 Department of Engineering and Architecture, University of Parma, Parco Area delle Scienze, 181/A, Parma 43124, Italy 4 Department of Basic Science, University of Engineering and Technology, Peshawar 25000, Pakistan 5 Department of Physics, Faculty of Sciences, Abou Bekr Belkaid University, P.O. Box 119, Tlemcen 13000, Algeria","PeriodicalId":7897,"journal":{"name":"Annales De Chimie-science Des Materiaux","volume":"107 1","pages":"93-103"},"PeriodicalIF":0.8,"publicationDate":"2021-04-30","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"77814096","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"X-Ray Peak Profile Analysis of Materials M1 and M2 by Williamson-Hall and Size-Strain Plot Methods","authors":"Lalmi Khier, Lakel Abdelghani, D. Maouche","doi":"10.18280/ACSM.450209","DOIUrl":"https://doi.org/10.18280/ACSM.450209","url":null,"abstract":"Received: 21 September 2020 Accepted: 10 March 2021 In this work, we have studied the Kaolin M1 and M2 by the X-ray diffraction method, and we have focused on mullite phase which is the main phase present in common in both products. An update of the program of the method of Stokes was carried out, it was necessary to the microstructural analysis. The completed version is less sensitive to the choice by excess of the number of coefficients of Fourier with regard to the effect of truncation and the office plurality of the errors. The determination of the symmetry of the cell of the principal phase (mullite) in the studied fritted Kaolins was carried out. In Kaolin M1, the size of crystallites of the dominant phase varies between 80 to 170 Å. In Kaolin M2, the size of the crystalline grains of mullite varies between 100 to 400 Å. The size of crystallites was confirmed by the joint method of Williamson-Hall. A distribution of sizes of crystallites was carried out. It shows a dominance of the size of approximately 140 Å for the principal phase of Kaolin M1 and a dominance of the size of approximately 230 Å for the same principal phase of Kaolin M2. By the study of the profiles of line by DRX, it appears very clearly that the principal phase of the various sintered Kaolins, mullite, is free from internal microstrains. It is the case of the mixtures fritted not only at low temperature (1100°C) during 1 hour but also the case of the mixtures of the type ‘chamotte’ cooks with 1350°C during very long times.","PeriodicalId":7897,"journal":{"name":"Annales De Chimie-science Des Materiaux","volume":"93 1","pages":"167-173"},"PeriodicalIF":0.8,"publicationDate":"2021-04-30","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"85883305","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Shourya Sahdev, Himanshu Kumar, Ravi Butola, R. Singari
{"title":"Evaluating the Effect of Process Parameters on FSP of Al5083 Alloy Using ANSYS","authors":"Shourya Sahdev, Himanshu Kumar, Ravi Butola, R. Singari","doi":"10.18280/ACSM.450203","DOIUrl":"https://doi.org/10.18280/ACSM.450203","url":null,"abstract":"Received: 4 January 2021 Accepted: 11 March 2021 Friction stir processing (FSP), compared to other solid-state processing methods, is a one-step process that attains refinement and homogeneity in its Microstructure. The complex configuration of various kinds of welds in FSP and their 3-D (threedimensional) nature makes it tough to develop an overall system of ruling equations for theoretically analysing the functioning of the friction stir processed materials. The experimental trials are usually expensive and time-consuming. These hurdles can be overcome often by doing numerical analysis. The mechanical and microstructural characteristics of the Stir-Zone can be precisely supervised by enhancing the parameters of tool design, material properties, parameters of friction stir processing, and active heating and cooling. In this study, the significance of process parameters during FSP of Aluminium 5083 and the role of numerical analysis using ANSYS Workbench in the prediction of material behaviour have been discussed.","PeriodicalId":7897,"journal":{"name":"Annales De Chimie-science Des Materiaux","volume":"21 1","pages":"113-120"},"PeriodicalIF":0.8,"publicationDate":"2021-04-30","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"81256741","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}