2021 18th International Multi-Conference on Systems, Signals & Devices (SSD)最新文献_第7页

Energy management system for a Stand-alone Wind/ Diesel/ BESS/ Fuel-cell Using Dynamic Programming 基于动态规划的独立风/柴油/ BESS/燃料电池能源管理系统

2021 18th International Multi-Conference on Systems, Signals & Devices (SSD) Pub Date : 2021-03-22 DOI: 10.1109/SSD52085.2021.9429362

Mohamed-hamza Laraki, B. Brahmi, C. El‐Bayeh, M. Rahman

引用次数: 2

Tonic-Myoclonic Epileptic Seizure Classification based on Surface Electromyography 基于体表肌电图的强直-肌阵挛性癫痫发作分类

2021 18th International Multi-Conference on Systems, Signals & Devices (SSD) Pub Date : 2021-03-22 DOI: 10.1109/SSD52085.2021.9429401

Achraf Djemal, D. Bouchaala, A. Fakhfakh, O. Kanoun

引用次数: 5

The impact of electrodes on the reduction of anisotropy in biological tissue 电极对降低生物组织各向异性的影响

2021 18th International Multi-Conference on Systems, Signals & Devices (SSD) Pub Date : 2021-03-22 DOI: 10.1109/SSD52085.2021.9429393

Chaima Dhifallah, N. Hamdaoui, S. Ameur, R. Ajjel

引用次数: 0

Enhanced piezoelectric performance of lead free BCZT based flexible nanogenerator 提高无铅BCZT基柔性纳米发电机的压电性能

2021 18th International Multi-Conference on Systems, Signals & Devices (SSD) Pub Date : 2021-03-22 DOI: 10.1109/SSD52085.2021.9429322

Sarra Missaoui, A. Bouhamed, Mohamed Hassan Khedri, H. Khemakhem, O. Kanoun

{"title":"Enhanced piezoelectric performance of lead free BCZT based flexible nanogenerator","authors":"Sarra Missaoui, A. Bouhamed, Mohamed Hassan Khedri, H. Khemakhem, O. Kanoun","doi":"10.1109/SSD52085.2021.9429322","DOIUrl":"https://doi.org/10.1109/SSD52085.2021.9429322","url":null,"abstract":"Piezoelectric nanogenerator are attracting a lot of attention due to environmental constraints and the ecological considerations of energy collection. A piezoelectric nanocomposite based on Ba0.85Ca0.15Zr0.1Ti0.9O3 (BCZT) nanoparticles and PDMS polymer with excellent output properties for the application of nanogenerators has been developed. The piezoelectric nanogenerator is smart device that offers these required qualities and properties and converts mechanical energy. Here PENG can generate an open circuit voltage of 10 V respectively under the effect of light finger tapping. It reaches an output power of $mathrm{P}=2.218 mumathrm{W}$ for a resistance $mathrm{R}=370 mathrm{k}Omega$ under shaker vibration. This generator is known by its simple and ordinary design as well its high performance after polarization. However, the polarization is long and unsafe. To avoid this problem, a homogeneous distribution of carbon nanotubes (CNTs) on the BCZT/PDMS matrix is the best solution to have self-polarized generator. In this study, piezoelectric nanocomposites were prepared using solution mixing method. A comparative study was performed to investigate the impact of CNTs on the performance of nanogenrators under external mechanical load. The nanogenerator with 15 wt.% BCZT doped with CNTs offers an outstanding output performance with an open circuit voltage of 15 V and an output power $mathrm{P}=5.68029 mumathrm{W}$ at a resistance load $mathrm{R}=350 mathrm{k}Omega$ using the shaker device.","PeriodicalId":6799,"journal":{"name":"2021 18th International Multi-Conference on Systems, Signals & Devices (SSD)","volume":"1 1","pages":"889-894"},"PeriodicalIF":0.0,"publicationDate":"2021-03-22","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"91089860","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

引用次数: 3

Three-Level NPC Shunt Active Filter Powered by a Hybrid Fuel-Cell/Battery DC Bus Voltage 由混合燃料电池/电池直流母线电压供电的三电平NPC并联有源滤波器

2021 18th International Multi-Conference on Systems, Signals & Devices (SSD) Pub Date : 2021-03-22 DOI: 10.1109/SSD52085.2021.9429308

B. Bourouis, H. Djeghloud, H. Benalla

引用次数: 1

Design of an IoT-Enabled Microgrid Architecture for a Partial Grid-Connected Mode 部分并网模式下支持物联网的微电网架构设计

2021 18th International Multi-Conference on Systems, Signals & Devices (SSD) Pub Date : 2021-03-22 DOI: 10.1109/SSD52085.2021.9429408

Mahmoud Shaban, I. Dhaou

引用次数: 1

Design of a Wireless Sensor Node based on MSP430FR5969 for Environment Monitoring Applications 基于MSP430FR5969的环境监测无线传感器节点设计

2021 18th International Multi-Conference on Systems, Signals & Devices (SSD) Pub Date : 2021-03-22 DOI: 10.1109/SSD52085.2021.9429293

Mohammad Hossein Tarokh, Dhouha El Houssaini, C. Viehweger, O. Kanoun

{"title":"Design of a Wireless Sensor Node based on MSP430FR5969 for Environment Monitoring Applications","authors":"Mohammad Hossein Tarokh, Dhouha El Houssaini, C. Viehweger, O. Kanoun","doi":"10.1109/SSD52085.2021.9429293","DOIUrl":"https://doi.org/10.1109/SSD52085.2021.9429293","url":null,"abstract":"Environment monitoring using Wireless Sensor Networks (WSNs) is considered as a challenging and demanding field, which enables to collect and process large amount of data related to the deployment environment. Thus, the performance of the monitoring system is dependent strongly of the hardware capability of the deployed nodes, as well as of the communication protocols and data transmission strategies. In this work, a new wireless sensor node is introduced. The node uses MSP430FR5969 microcontroller, which offers a high processing capability with reduced energy consumption and has a maximum operating frequency of 16 MHz. The node is compact in size with a dimension of dimensions $53times 33 mm^{2}$. The node consumes an average of 27.35 mA during transmission. Current consumption during the sleep and idle modes are 0.33 mA and 31 mA, respectively. An outdoor application is presented, where the node is equipped with a solar panel for energy harvesting. The battery voltage variation and the Received Signal Strength (RSSI) were continuously measured and evaluated.","PeriodicalId":6799,"journal":{"name":"2021 18th International Multi-Conference on Systems, Signals & Devices (SSD)","volume":"68 1","pages":"241-248"},"PeriodicalIF":0.0,"publicationDate":"2021-03-22","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"80342829","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

引用次数: 2

Comparative Study of Digital Filters for a Smart Glove Functionalized with Nanocomposite Strain Sensor 纳米复合应变传感器功能化智能手套数字滤波器的比较研究

2021 18th International Multi-Conference on Systems, Signals & Devices (SSD) Pub Date : 2021-03-22 DOI: 10.1109/SSD52085.2021.9429298

B. B. Atitallah, J. R. Bautista-Quijano, Haythem Ayari, Ahmed Yahia Kallel, D. Bouchaala, N. Derbel, O. Kanoun

{"title":"Comparative Study of Digital Filters for a Smart Glove Functionalized with Nanocomposite Strain Sensor","authors":"B. B. Atitallah, J. R. Bautista-Quijano, Haythem Ayari, Ahmed Yahia Kallel, D. Bouchaala, N. Derbel, O. Kanoun","doi":"10.1109/SSD52085.2021.9429298","DOIUrl":"https://doi.org/10.1109/SSD52085.2021.9429298","url":null,"abstract":"Nowadays, the demand for flexible and wearable measurement systems is significantly increasing. Thereby, sensors based on carbon nanotubes (CNT) materials are gaining importance due to their high flexibility, sensitivity and medical compatibility. Nanocomposite based strain sensors present an interesting potential of movements detection that helps to build the basis for body attached sensor networks, which have the capability for tracking finger movements, gestures and grasping. However, the output of the sensor is noisy and having outliers due to the random deformation of the CNT conductive paths during applied strain, which needs to be filtered. This paper presents S-TPU/C-TPU strain sensors attached to a glove for hand gesture recognition. A filtering study has been conducted of four digital filters for real-time processing of the recorded data (Moving average, Moving median, Savitzky-Golay, and Gaussian), which is required to improve the quality of the data for better gesture identification and classification. The filters are evaluated based on their real-time response and smoothing performance. The Savitzky-Golay filter was found to be the most suitable filter to remove the inherent noises and smooth the baseline and curves of the signal with a fast real-time response equal to 0.072s.","PeriodicalId":6799,"journal":{"name":"2021 18th International Multi-Conference on Systems, Signals & Devices (SSD)","volume":"5 1","pages":"1366-1371"},"PeriodicalIF":0.0,"publicationDate":"2021-03-22","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"81987929","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

引用次数: 5

An approach for an efficient sharing of IP as a Service in cloud FPGA 云FPGA中IP即服务的有效共享方法

2021 18th International Multi-Conference on Systems, Signals & Devices (SSD) Pub Date : 2021-03-22 DOI: 10.1109/SSD52085.2021.9429338

Rym Skhiri, V. Fresse, J. Malek, Benoît Suffran, Jean-Paul Jamont

引用次数: 0

Stability study and robustness analysis of an exoskeleton-upper limb system 外骨骼-上肢系统的稳定性研究和鲁棒性分析

2021 18th International Multi-Conference on Systems, Signals & Devices (SSD) Pub Date : 2021-03-22 DOI: 10.1109/SSD52085.2021.9429352

Sana Bembli, N. K. Haddad, S. Belghith

引用次数: 0