International Journal of Ventilation最新文献

{"title":"The indoor environmental quality and energy savings potential of room ventilation units compared to exhaust-only ventilation systems in France","authors":"Vasileios Filis, K. Smith, J. Kolarik, F. Kuznik, Lucie Merlier","doi":"10.1080/14733315.2023.2198804","DOIUrl":"https://doi.org/10.1080/14733315.2023.2198804","url":null,"abstract":"Abstract Humidity-controlled mechanical exhaust ventilation (RH-MEV) has been widely used in France for over 35 years, demonstrating high durability and robustness. This exhaust-only ventilation strategy is widely used as an energy-saving measure, replacing constant mechanical exhaust ventilation (Constant-MEV) systems in residential buildings. It demonstrates energy savings due to the restricted airflows, but as a downside, the building’s indoor air quality (IAQ) often deteriorates. Moreover, it is impossible to recover heat with exhaust-only ventilation systems, which means that energy consumption for space heating is still quite significant and cold supply air temperatures are frequently introduced to the heated spaces. Room ventilation units (RVUs) with heat recovery represent an alternative ventilation solution allowing simple installation through the façade and providing fresh outdoor air and exhaust ventilation to each room. This study investigates these units’ energy saving potential and indoor environmental quality performance as an alternative solution to centralized exhaust-only ventilation systems. The dynamic simulations were performed for a reference residential building under various French climatic conditions for a heating season. The three ventilation strategies investigated were Constant-MEV, RH-MEV and room-based ventilation with RVUs. The results demonstrated 61–85% savings in space heating demand with the RVUs, compared to Constant-MEV under all climatic conditions. Compared to RH-MEV, the RVUs saved 44–75% energy for space heating while the CO2 concentration and relative humidity levels were decreased due to RVUs’ constant air exchange rate. In all cases, RVUs provided considerably higher supply air temperatures due to the implemented heat recovery, which can potentially improve indoor thermal comfort.","PeriodicalId":55613,"journal":{"name":"International Journal of Ventilation","volume":"70 1","pages":""},"PeriodicalIF":1.5,"publicationDate":"2023-04-21","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"79732830","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":4,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"A preliminary assessment of the health impacts of indoor air contaminants determined using the DALY metric","authors":"Giobertti Morantes, Benjamin Jones, M. Sherman, Constanza Molina","doi":"10.1080/14733315.2023.2198800","DOIUrl":"https://doi.org/10.1080/14733315.2023.2198800","url":null,"abstract":"Abstract Common metrics used for assessing air quality are based on guidelines and/or standards for regulating concentrations that should not be exceeded over a period. Exceeding those values would represent problematic situations. A lack of agreement on appropriate norms or standards deems this approach sub-optimal. Moreover, this approach does not relate a proportion of exceedance to specific health outcomes. A need to develop health-centered IAQ metrics that can quantify burden of disease in terms of epidemiological evidence of population morbidity and mortality supported by the best knowledge of health effects, is pressing. This work proposes an approach that harnesses the advantages of using disability adjusted life years (DALYs) as a valuable metric to quantify and rank the burden of household air pollution, as a global perspective. Two methods were used to compute DALYs, one mainly based on incidence data and another mainly based on effect factors (i.e. DALYs per unit-intake of contaminant of interest). The methods are based on the following parameters: risk estimates, baseline incidence rates, damage factors, indoor air contaminant concentrations, human toxicological & epidemiological effect factors, dose–response factors, cancer-related variables and breathing rates. Systematic searches and reviews of peer-reviewed literature (including systematic reviews and meta-analyses) were performed to find information on said input parameters. Meta-analysis was used to pooled and synthesise data from different studies. A Monte Carlo approach was used to model results in DALYs lost. Over 1000 articles were revised and overall ∼200 unique sources were used as sources of data. Ten contaminants were accounted for with specific risk estimates and damage factors data, for which human epidemiological effect factors were derived. Representative concentrations of 45 contaminants were calculated. Thirty-nine contaminants were accounted for human toxicological effect factors. Total pooled DALYs were estimated per 100,000 exposed population with corresponding uncertainty intervals. Estimated population-averaged annual cost, in DALYs lost, of chronic air contaminant inhalation in dwellings indicate that the contaminants with highest median DALY loss estimates are PM10 and PM2.5 (magnitudes of 103); PMcoarse, formaldehyde and NO2 could be found with magnitudes of 102; contaminants with magnitudes of 101 include radon and ozone, finally SO2 and acrolein would have magnitudes of 10°; mould-related bioaerosols could be of interest as well. The updated strategies allowed for the quantification of contaminants and health outcomes that were not accounted for in previous works. Computed DALYs have lower uncertainty intervals than those previously proposed. The updated methodology presented in this study may be used to assess cumulative health impacts of indoor air contaminants.","PeriodicalId":55613,"journal":{"name":"International Journal of Ventilation","volume":"28 1","pages":""},"PeriodicalIF":1.5,"publicationDate":"2023-04-18","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"80018068","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":4,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Assessing the “sufficient ventilation” requirement for Austrian buildings: development of a Monte Carlo based spreadsheet calculation to estimate airing intervals and mould risk in window ventilated buildings","authors":"G. Rojas, Andreas Greml, Rainer Pfluger, P. Tappler","doi":"10.1080/14733315.2023.2198788","DOIUrl":"https://doi.org/10.1080/14733315.2023.2198788","url":null,"abstract":"Abstract In Austria the lack of guidelines or standards has caused many discussions and disputes on the question if “sufficient ventilation” can be ensured with window airing only, in particular in newly constructed, airtight residential buildings. This work presents the development of a calculation method aiming to provide a simple-to-use tool to estimate the risk of mould growth and the window airing interval required to ensure good indoor air quality assuming a range of different boundary conditions and occupant behaviours. The method implements a Monte Carlo approach calculating 1000 single zone mass balances for carbon dioxide (on a room level) and water vapor (on a housing level). Air infiltration through the building envelope is accounted using the so-called LBL-model. The time interval between window airing required to comply with CO2 limit value is estimated by calculating the time evolution of the CO2 concentration for 1000 different parameter combinations. The mould risk is estimated by a 1000-fold calculation of the daily averaged indoor air humidity and the resulting water activity on critical wall surfaces. The results are displayed as probability distributions providing information on the risk that the queried situation can or cannot ensure “sufficient ventilation”. Exemplary calculations for bedrooms of new multifamily buildings estimate that intervals between window airing events (to keep time-averaged CO2-concentration below 1000 ppm), will vary between 23 and 190 minutes (representing the 5th and the 95th percentile). This is clearly below an acceptable intervention interval for bedrooms. For living rooms, the assessment shows a strong sensitivity on the “accessible” air volume. The humidity assessment for this type of housing suggests that mould growth could occur in about 17% of the cases even though air exchange corresponding to two airing events per day were assumed. An additional outdoor air exchange of up to 40 m³/h would be required to reduce the mould risk fraction to <1%, suggesting the need for mechanical ventilation concepts in residential housing to enable healthy indoor environment independently of occupant behaviour.","PeriodicalId":55613,"journal":{"name":"International Journal of Ventilation","volume":"55 1","pages":""},"PeriodicalIF":1.5,"publicationDate":"2023-04-18","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"86808953","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":4,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"IAQ in CCU units: an experimental and numerical investigation based on the outlet air height (case study: Namazi Hospital, Shiraz)","authors":"Forough Farhadi, M. Khakzand, H. Altan, Saeid Chahardoli","doi":"10.1080/14733315.2023.2198743","DOIUrl":"https://doi.org/10.1080/14733315.2023.2198743","url":null,"abstract":"Indoor air quality (IAQ) is a significant concern that affects our health. Recent studies show how poor IAQ amplifies the effects of airborne viruses, which endanger the health of the population relative to the COVID-19. This study aims to find the relationship among IAQ, the location of the air outlet valve and the behavior of the IAQ indicators in the cardiac care unit (CCU) at Namazi Hospital, Shiraz, Iran. In this context, the condition of the air outlet valve can play an important part in preparing a better IAQ. To test the hypothesis, articles based on IAQ guidelines have been studied. Also, certain emissions (CO2, CO, PM2.5 and PM10) have been measured, and the relationship between IAQ, the location of the air outlet valve and the behavior of these emissions in the patient's room at Namazi Hospital. This room has been analyzed using computational fluid dynamics for the prediction of the specification of incoming air flow particles. Also, a Eulerian–Lagrangian model was used. In constant, the turbulence model (realizable k–ԑ) and discrete particle model were employed. The results show that when the outlet valve is placed on the wall at 20 cm, it decreased particle deposition in the room, and as a result, IAQ will be improved and at the same time, the chances of transmitting infectious diseases will be reduced. It is also indicated that a higher amount of particle deposition fraction (ca. 0.71) obtains when the outlet valve is located on the top of the wall. © 2023 Informa UK Limited, trading as Taylor & Francis Group.","PeriodicalId":55613,"journal":{"name":"International Journal of Ventilation","volume":"63 1","pages":""},"PeriodicalIF":1.5,"publicationDate":"2023-04-16","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"74270017","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":4,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Effectiveness of personalized ventilation in reducing airborne infection risk for long-term care facilities","authors":"Marloes M. A. de Haas, M. Loomans, Marije te Kulve, A. Boerstra, H. Kort","doi":"10.1080/14733315.2023.2198781","DOIUrl":"https://doi.org/10.1080/14733315.2023.2198781","url":null,"abstract":"Throughout history, the human population has experienced major outbreaks of infectious diseases. In December 2019 the previously unknown SARS-CoV-2 virus emerged, which had a huge impact globally. Residents of long- term care facilities (LTCFs) showed to be highly susceptible to infection due to their frailty. Respiratory infectious diseases, such as COVID-19, can spread among others via the airborne transmission route. This is caused by sharing the same indoor environment. To reduce the risk of infection via the airborne route, it is important to consider ventilation and other building services system measures, including personalized ventilation (PV). PV has the potential of being a suitable solution for LTCFs, as it could still allow interaction between residents and visitors in the common rooms, which is regarded very important from a mental health perspective. To identify the potential of PV in the context of infection risk, a laboratory experiment was conducted to investigate its effectiveness on the infection risk reduction. The research was performed in a controlled climate chamber. In the experiment a person was mimicked and positioned close to a PV system that provided filtered recirculated air. A particle source maintained a constant particle concentration in the room. The performance of the PV system was measured through the particle concentration near the breathing zone as compared to the room concentration. Several design parameters were investigated. Translating the outcomes to a fictive (equivalent) ventilation rate, the Wells-Riley equation was applied to determine the infection risk. The outcomes indicated that, in this laboratory setting, the PV system can reduce the risk of an infection up to 50%. The performance is affected by the distance of the supply head to the breathing zone, the angle of the supply head, airflows in the room and the location of the particle source. To further optimize the system and allow its application in LTCFs, several aspects still need further attention, such as mobility/placing the person, the breathing pattern of the user and factors influencing the comfort and use. © 2023 The Author(s). Published by Informa UK Limited, trading as Taylor & Francis Group.","PeriodicalId":55613,"journal":{"name":"International Journal of Ventilation","volume":"63 2","pages":""},"PeriodicalIF":1.5,"publicationDate":"2023-04-10","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"72634365","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":4,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Impact of ventilation type on indoor generated PM and VOC levels for different indoor activities","authors":"Kevin Verniers, Frederik Losfeld, I. Pollet, J. Laverge","doi":"10.1080/14733315.2023.2198780","DOIUrl":"https://doi.org/10.1080/14733315.2023.2198780","url":null,"abstract":"Abstract Residential ventilation systems target in an energy efficient manner an indoor atmosphere fulfilling people’s desired comfort requirements with regard to CO2, temperature, and RH. However, the reach of an indoor atmosphere is not limited to comfort only. Ensuring a healthy indoor atmosphere reducing the risk of acute and chronic diseases caused by the inhaled air is also of importance. A number of elements contribute to indoor air pollution, such as: Volatile Organic Compounds (VOCs), infectious aerosols, and Particulate Matter (PM). These elements combined with the larger proportion of time spent indoors by humans put an emphasis on creating healthy spaces indoors. This investigation treats and discusses in-situ indoor measurements with the Renson Sense of PM1,2.5,4,10, and VOCs caused during the following activities: induction cooking of a typical European meal, vacuuming, and burning of regular and scented candles. All activities were carried out according to a fixed schedule. Both PM and VOC were measured in several rooms of a single, airtight dwelling in Belgium while the following ventilation options were considered: no ventilation, window ventilation, intensive ventilation via a cooker hood, Mechanical Extract Ventilation (MEV = natural supply, mechanical exhaust), and Mechanical Ventilation with Heat Recovery (MVHR = mechanical supply and exhaust). The exhaust flow rate of both MEV and MVHR was set identical to avoid the impact of different air exchange rates on building level. The following main findings were derived from the results. Particle diameters <1 µm (PM1) were dominantly present during all activities and for all considered ventilation options, possibly due to the sensor technology. The spread of cooking-related PM was confined to the floor where the activity took place, and a cooking hood was most effective in reducing PM, as could be expected. Furthermore, no ventilation exhibited logically the slowest decay of PM1, whereas this was most pronounced for window ventilation followed by an equal decay for MEV and MVHR. Burning scented candles led to higher PM levels compared to regular candles, while the PM peak was observed for both when extinguishing the candle. The spread of PM from burning candles was also restricted to the floor where the activity took place, window ventilation clearly reduced the spreading throughout the floor compared to the other ventilation options. Vacuuming activity created much lower PM levels compared to induction cooking and burning candles and therefore the spread of this PM throughout the dwelling was generally non-significant. Regarding VOC, the impact from induction cooking and burning candles was apparent in contrast to vacuuming for all considered ventilation conditions. Next to this, the spread of VOC throughout the building was more limited compared to PM.","PeriodicalId":55613,"journal":{"name":"International Journal of Ventilation","volume":"2003 1","pages":""},"PeriodicalIF":1.5,"publicationDate":"2023-04-07","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"91314827","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":4,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Impact of thermal inertia coupled to natural night ventilation. A case study for a high performance building in continental climate","authors":"Sarah Truchet, A. Jay, E. Wurtz, J. Anger, A. Brun, P. Bernaud","doi":"10.1080/14733315.2023.2188346","DOIUrl":"https://doi.org/10.1080/14733315.2023.2188346","url":null,"abstract":"","PeriodicalId":55613,"journal":{"name":"International Journal of Ventilation","volume":"55 1","pages":""},"PeriodicalIF":1.5,"publicationDate":"2023-03-20","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"74141553","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":4,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"The effect of atrium configurations on energy usage and natural ventilation in high-rise office buildings in Tehran climate","authors":"Meysam Daloe Heydari, A. Ghanbaran, M. Varmazyar","doi":"10.1080/14733315.2023.2187536","DOIUrl":"https://doi.org/10.1080/14733315.2023.2187536","url":null,"abstract":"","PeriodicalId":55613,"journal":{"name":"International Journal of Ventilation","volume":"2 1","pages":""},"PeriodicalIF":1.5,"publicationDate":"2023-03-13","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"80184441","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":4,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Stilt houses in Southeastern and Northern European climate conditions","authors":"N. Lukic, Davor Jovanović, N. Nikolic","doi":"10.1080/14733315.2023.2181528","DOIUrl":"https://doi.org/10.1080/14733315.2023.2181528","url":null,"abstract":"","PeriodicalId":55613,"journal":{"name":"International Journal of Ventilation","volume":"17 1","pages":""},"PeriodicalIF":1.5,"publicationDate":"2023-03-12","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"82393111","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":4,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Editorial. Ventilation: a focused subject with broad impacts","authors":"Jianshun \"Jensen\" Zhang","doi":"10.1080/14733315.2023.2189797","DOIUrl":"https://doi.org/10.1080/14733315.2023.2189797","url":null,"abstract":"","PeriodicalId":55613,"journal":{"name":"International Journal of Ventilation","volume":"32 1","pages":"1 - 2"},"PeriodicalIF":1.5,"publicationDate":"2023-01-02","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"73297569","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":4,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}