The International Conference on Processing and Performance of Materials (ICPPM 2023)最新文献

Statement of Peer Review 同行审议声明

The International Conference on Processing and Performance of Materials (ICPPM 2023) Pub Date : 2024-03-05 DOI: 10.3390/engproc2024061050

K. Babu, Anirudh Venkataraman Krishnan, K. Jayakumar, M. Dhananchezian

引用次数: 0

Correction: Krishnan et al. Taguchi Analysis of Hardness and Strength of Hot Compressed Duplex Steel Using Gleeble Thermomechanical System. Eng. Proc. 2024, 61, 5 更正：Krishnan et al. 使用 Gleeble 热机械系统对热压双相钢的硬度和强度进行田口分析。Eng.2024, 61, 5

The International Conference on Processing and Performance of Materials (ICPPM 2023) Pub Date : 2024-03-05 DOI: 10.3390/engproc2024061051

Anirudh Venkataraman Krishnan, D. Ananthapadmanaban, Keerthi Vasan

引用次数: 0

Optimization of Process Parameters of Aluminium 7075/TiCnp MMC Fabricated Using Powder Metallurgy Route 利用粉末冶金工艺制造铝 7075/TiCnp MMC 的工艺参数优化

The International Conference on Processing and Performance of Materials (ICPPM 2023) Pub Date : 2024-02-28 DOI: 10.3390/engproc2024061049

Ashok Raj Rajendran, Antony Prabu Dhanaraj, Jayakumar Kandhasamy Sadhasivam, Ananthakumar Mani, Mohd Aamir Qureshi

引用次数: 0

Worker Exposure to Hand-Arm Vibration in Fettling Shop: An Experimental Study in Foundry 工人在浇注车间暴露于手臂振动：铸造车间的实验研究

The International Conference on Processing and Performance of Materials (ICPPM 2023) Pub Date : 2024-02-19 DOI: 10.3390/engproc2024061047

Vigneswaran Chidambaram, Madhan Mohan Gopalsamy, Divya Zindani, Guddakesh Kumar Chandan, Mohd Aslam, Brajesh Kumar Kanchan

{"title":"Worker Exposure to Hand-Arm Vibration in Fettling Shop: An Experimental Study in Foundry","authors":"Vigneswaran Chidambaram, Madhan Mohan Gopalsamy, Divya Zindani, Guddakesh Kumar Chandan, Mohd Aslam, Brajesh Kumar Kanchan","doi":"10.3390/engproc2024061047","DOIUrl":"https://doi.org/10.3390/engproc2024061047","url":null,"abstract":": Hand-arm vibration is a significant occupational hazard commonly faced by industrial workers, particularly those in foundries engaged in fettling activities. The vibration exposure can result in various health problems, such as hand-arm vibration syndrome (HAVS), carpal tunnel syndrome, and other musculoskeletal disorders. Therefore, it is essential to evaluate workers’ vibration environment and exposure levels to prevent such health issues. At first, the present study explored a different type of vibration exposure followed by vibration syndrome and vibration measurement methods. A case study was considered wherein the comparative analysis between pneumatic and swing grinders was performed between vibration magnitude, particularly in the fettling shop. The results revealed that the pneumatic hand grinder worker experienced a vibration magnitude of 3.6 m/s 2 at 208 exposure points. In comparison, the swing grinder had a magnitude of 6.5 m/s 2 at 668 exposure points for an 8 h workday. It can be noted that regulatory bodies such as ISO 5349 recommend an exposure vibration magnitude of 5 m/s 2 for an 8 h workday and in the present context, these exposure levels were found to be higher than the standard limits. Accordingly, proper recommendations to sustain these levels within the limits are suggested. Such recommendations will protect workers from health hazards and help employers avoid costly compensation claims and legal liabilities. This study emphasizes the importance of addressing hand-arm vibration in the workplace for a safe working environment.","PeriodicalId":517294,"journal":{"name":"The International Conference on Processing and Performance of Materials (ICPPM 2023)","volume":"41 ","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-02-19","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"140449853","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

引用次数: 0

Comparative Study on the Effect of Tool Wear on Turning Mild Steel and Stainless Steel with a Ceramic Tool Insert Using Taguchi Method 使用田口方法比较研究使用陶瓷刀片车削低碳钢和不锈钢时刀具磨损的影响

The International Conference on Processing and Performance of Materials (ICPPM 2023) Pub Date : 2024-02-19 DOI: 10.3390/engproc2024061048

S. Raghu, Jayasheel I. Harti, Pankaj R. Jadhav, M. C. P. Selvan, K. S. Vijaysekar, Bharath Venkatesh

{"title":"Comparative Study on the Effect of Tool Wear on Turning Mild Steel and Stainless Steel with a Ceramic Tool Insert Using Taguchi Method","authors":"S. Raghu, Jayasheel I. Harti, Pankaj R. Jadhav, M. C. P. Selvan, K. S. Vijaysekar, Bharath Venkatesh","doi":"10.3390/engproc2024061048","DOIUrl":"https://doi.org/10.3390/engproc2024061048","url":null,"abstract":": Machining is a critical aspect of metalworking since it is used to cut metal. Machine tools, particularly cutting tools, are critical in metalworking for successful metal cutting. They have a significant role in developing distinct shapes and forms. Machining has become more crucial in modern automated manufacturing systems because of the massive upsurge in production time and the necessity to offset the high capital cost. Specifically, the Taguchi approach is used in this experiment because it uses an orthogonal array to investigate the parameters through a fixed number of experiments. In this case, three parameters (speed, depth of cut, and feed) were combined to produce nine possible result combinations. Stainless steel and mild steel are machined with the help of a ceramic tool insert with certain combinations. This is performed to estimate tool wear and surface roughness. The comparative study was conducted for two different materials: stainless steel (SS) and mild steel (MS).","PeriodicalId":517294,"journal":{"name":"The International Conference on Processing and Performance of Materials (ICPPM 2023)","volume":"15 7","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-02-19","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"140450754","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

引用次数: 0

Effects of Tribology and Mechanical Properties on Silicon Carbide and Glass Fiber-Reinforced Hybrid Nanocomposites 摩擦学和机械性能对碳化硅和玻璃纤维增强混合纳米复合材料的影响

The International Conference on Processing and Performance of Materials (ICPPM 2023) Pub Date : 2024-02-17 DOI: 10.3390/engproc2024061046

Maridurai Thirupathy, Muthuraman Vadivel

{"title":"Effects of Tribology and Mechanical Properties on Silicon Carbide and Glass Fiber-Reinforced Hybrid Nanocomposites","authors":"Maridurai Thirupathy, Muthuraman Vadivel","doi":"10.3390/engproc2024061046","DOIUrl":"https://doi.org/10.3390/engproc2024061046","url":null,"abstract":": This study aims to enhance the mechanical and wear properties of hybrid nanocomposites by incorporating SiC nanoparticles and glass fibers into an epoxy resin matrix, utilizing a neural network for optimization. The mechanical properties were evaluated via flexural, impact, and wear tests. SiC nanoparticle concentrations were varied at three levels using the Taguchi technique. The results were optimized with the Taguchi signal-to-noise ratio approach. Regression analysis was used to determine the wear rate, flexural strength, and impact properties of the composites. SiC reinforcement significantly influenced the flexural and impact strength, along with wear resistance. The composition with 2% SiC showed a flexural strength of 95 MPa, while 4% and 6% SiC compositions exhibited strengths of 110.5 MPa and 125 MPa, respectively. The impact strength followed a similar trend. The wear test results demonstrated a decrease in the specific wear rate (Swr) and coefficient of friction (CoF) with an increasing SiC nanoparticle percentage. The optimal parameters were identified as 6% SiC nanoparticle loading, 15 N load, 160 RPM rotation speed, and a 40.2 mm sliding distance. The enhancement in impact strength is attributed to SiC nanoparticle reinforcement. The results were further refined using an artificial neural network for improved predictability. This research underscores the effectiveness of hybrid nanocomposites with SiC nanoparticles and glass fibers, as well as the potential of neural networks for process optimization, benefiting industries requiring high-performance materials.","PeriodicalId":517294,"journal":{"name":"The International Conference on Processing and Performance of Materials (ICPPM 2023)","volume":"210 ","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-02-17","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"140453117","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

引用次数: 0

Reinforcement of SiC Particles on Friction Stir Processing of Aluminium AA7050 碳化硅颗粒对 AA7050 铝摩擦搅拌加工的强化作用

The International Conference on Processing and Performance of Materials (ICPPM 2023) Pub Date : 2024-02-16 DOI: 10.3390/engproc2024061045

Ramesh Arwin, Sunil Abraham, Praveen Rajendran, Ram Prakash Shanmugasundaram

引用次数: 0

An Overview on 3D Printing of Ceramics Using Binder Jetting Process 使用粘合剂喷射工艺进行陶瓷 3D 打印概述

The International Conference on Processing and Performance of Materials (ICPPM 2023) Pub Date : 2024-02-09 DOI: 10.3390/engproc2024061044

Venukumar Sarila, Harisivasri Phanindra Koneru, Saritha Pyatla, Muralimohan Cheepu, Venkata Charan Kantumunchu, Damodaram Ramachandran

引用次数: 0

Effect of Texture Thickness and Angles on Performance Output of a Solar Cell 纹理厚度和角度对太阳能电池性能输出的影响

The International Conference on Processing and Performance of Materials (ICPPM 2023) Pub Date : 2024-02-08 DOI: 10.3390/engproc2024061043

Apurv Yadav, S. Pillai

引用次数: 0

A Characterization Study of the ZE41 Magnesium Alloy Using Abrasive Waterjet Cutting 使用加砂水刀切割 ZE41 镁合金的特性研究

The International Conference on Processing and Performance of Materials (ICPPM 2023) Pub Date : 2024-02-06 DOI: 10.3390/engproc2024061041

Prem Padmaraja, Rabin Sasi, Ram Prakash Shanmugasundaram, Rajesh Munusamy, Selvakumar Gurusamy

引用次数: 0