Maderas-Cienc Tecnol最新文献

{"title":"Utilization of nanotalc modified adhesives in plywood panels","authors":"Yanka Lourenço, Carolina Aparecida dos Santos, Ana Carolina Corrêa Furtini, Lourival Mendes, José Benedito Guimarães Junior","doi":"10.22320/s0718221x/2024.41","DOIUrl":"https://doi.org/10.22320/s0718221x/2024.41","url":null,"abstract":"As an alternative for the partial replacement of synthetic adhesives are the modifications that occur still during their synthesis, to improve and adhere new properties. Among the possible materials used in nanoscale, talc is a mineral material of natural origin and a promising raw material due to its low cost, lightness, natural hydrophobicity. Due to the scarcity of studies with the insertion of nanotalc in adhesives, this study aimed to produce plywood panels bonded with phenol-formaldehyde adhesive nanomodified with talc to evaluate its physical-mechanical resistance when compared to conventional synthetic adhesives. To carry out this study, three Pinus oocarpa trees with 28 years of age were used. Different concentrations of talc were used in the formulation with the phenol-formaldehyde adhesive, being the treatments 0; 0,05; 1; 1,5 and 2 % of talc (mass/mass) in relation to the adhesive, with three panels per treatment, totaling 15 panels. The pressing time was 8 minutes with temperature of 160 ºC and pressure of 1 MPa. The physical-chemical characteristics of the lignocellulosic material and of the plywood panels were determined. The quality of the adhesive produced was demonstrated by its resistance to water absorption with the insertion of up to 2 % talc to the adhesive, reducing it considerably. From 1 % talc inserted, the plywood panels had their mechanical characteristics superior to those glued with pure phenol-formaldehyde adhesive. However, as the study is innovative in nature, further research should focus on the application and quality evaluation of other talc nanomodified adhesives on different types of wood panels.","PeriodicalId":513241,"journal":{"name":"Maderas-Cienc Tecnol","volume":"75 17","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-05-17","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"140964625","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"The influence of road traffic and industrial plant-induced air pollution on the physical, mechanical, chemical and morphological properties of the black pine wood","authors":"Suheyla Esin Koksal, Orhan Kelleci, Gul Tekingunduz, Deniz Aydemir","doi":"10.22320/s0718221x/2024.40","DOIUrl":"https://doi.org/10.22320/s0718221x/2024.40","url":null,"abstract":"Road traffic pollution and industrial plant-induced pollution affect negatively the development of forest trees. How forest trees are affected by their growing environment is important for sustainable environment. The study aimed to investigate the physical, mechanical, chemical, and morphological properties of the Pinus nigra (black pine) tree which grows under different conditions. Tree samples were chosen from three different lands where were inside the forest (O), near the roadside (Y), and near the factory (F). It was studied whether there were any significant differences among the “O”, “Y” and “F” in terms of their wood properties such as physical, mechanical, chemical, and morphological. As a result, the “O” samples demonstrated more regular annual ring structure. On the other hand, it was observed that the “Y” samples had longer and wider tracheid cells. In addition, “Y” samples had better mechanical strength than “O” and “F”. Environmental pollution caused the presence of some different elements (chlorine and iron) in “Y” and “F”. As a result, it was determined that the trees growing near the roadside or near industrial plants have significant differences from forest trees which are far away from pollutions. It is possible to say that Pinus nigra (black pine) is resistant to environmental stress. For this reason, it can be recommended to use it as a barrier to reduce air pollution on the roadsides.","PeriodicalId":513241,"journal":{"name":"Maderas-Cienc Tecnol","volume":"105 S2","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-05-03","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"141016035","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Assessing the effectiveness of static heuristics for scheduling lumber orders in the sawmilling production process","authors":"Francisco P Vergara, Cristian D. Palma, John D. Nelson","doi":"10.22320/s0718221x/2024.39","DOIUrl":"https://doi.org/10.22320/s0718221x/2024.39","url":null,"abstract":"Although optimization models can be used to plan the production process, in most cases static heuristics, such as earliest due date (E), longest processing time (L), and shortest processing time (S), are used because of their simplicity. This study aims to analyze the production cost of the static heuristics and to determine how this cost relates to the size of the production orders in the sawmilling industry. We set a planning problem with different orders and due dates and solved it using two cost-minimization models to compare their solutions. The first was a planning model (PL) where orders were split up into products demand by period, and the second, a planning scheduling (PS) where the sequence of processing orders based on static heuristics was assumed as known. In the latter, the minimum production cost for each static heuristic was found. In both models, the same resource constraints were assumed. The costs showed no significant changes based on order sizes. However, 0,5 % of orders were delayed using PS-E, and 17 % of orders were delayed using PL. PL was an efficient solution method when changing the orders´ size and when looking for the best static heuristic to process the orders. However, PS-E showed the ability to reduce the backlog close to zero while the PL backlog ratio was 17 %. No penalties were applied to backlogs due to their subjective nature; however, when shortages occurred, the demand was unmet or backlogged with substantial costs. Thus, in case the proposed method is adopted using a conservative backlog cost, a sawmill producing under the cut-to-order environment that produces 300000 m3 /year would reduce backlogged orders by 51000 m3. If the holding lumber cost is 2 $/m3, annual savings would be $408000.","PeriodicalId":513241,"journal":{"name":"Maderas-Cienc Tecnol","volume":"59 4","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-04-23","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"140670873","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Contribution of extractives to the bark color of Caesalpinia sappan","authors":"B. Purba, Masendra Masendra, R. Pujiarti, G. Lukmandaru","doi":"10.22320/s0718221x/2024.38","DOIUrl":"https://doi.org/10.22320/s0718221x/2024.38","url":null,"abstract":"The purpose of this study was to investigate the contribution of Caesalpinia sappan (sappan wood) bark extractives by analyzing color change of the bark after extraction and the color of the extracts with several color measurement methods. Successive extraction was performed with n-hexane, ethyl acetate, methanol, and hot water. Color change of the bark was measured using CIELab color system and the extracts were analyzed with Ultraviolet-Visible Spectrophotometer, total phenolic content (TPC), and Gas Chromatography Mass Spectrometry (GC-MS). The results showed that the highest change on the bark color after methanol extraction with the Δa* and Δb* values of -2,53 ± 0,60 and -3,64 ± 1,20 respectively. Also, methanol extract showed the highest total phenolic content (860,24 ± 30,19 mg GAE/g). In addition, the Ultraviolet-Visible is analysis showed a peak at 478 nm in the hot-water soluble extract and two peaks in the methanol soluble extract at 396 nm and 478 nm. Hydroquinone was detected as one of the major compounds by Gas Chromatography Mass Spectrometry in the methanol soluble extract. It was suggested that the color of Caesalpinia sappan (sappan wood) bark as well as the deep red coloration of its extract might be contributed by multiple phenolic compounds contained in the methanol extract with hydroquinone as its precursor. Therefore, it is also a potential source for coloring matter.","PeriodicalId":513241,"journal":{"name":"Maderas-Cienc Tecnol","volume":"29 14","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-04-02","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"140752955","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Influence of rice straw and wood fiber combination on physical and mechanical properties of rice straw pulverized composite board","authors":"Sujatha Dhanapal, Mamatha Singh, Uday Nagammanavar","doi":"10.22320/s0718221x/2024.37","DOIUrl":"https://doi.org/10.22320/s0718221x/2024.37","url":null,"abstract":"The production of particleboards from various kinds of ligno cellulosic materials are successful on commercial scale in various parts of the country.  However, much success is not seen in use of crop residues for particleboards. Rice straw and wheat straw are one such materials that are abundantly available in India that can be used to produce particleboard.  The present work investigated the effect of Rice straw particles and wood fibers combination on physical and mechanical properties of the composite board. The pulverized rice straw composite boards were produced with three different composition of rice straw material (100 %, 70 %, 50 %) and wood Fibers (0 %, 30 %, 50 %). Melamine Urea Formaldehyde (MUF), Phenol Cardanol Formaldehyde (PCF), Blocked Isocyanate resin combined with PCF (BPCF), Blocked Isocyanate combined with Urea Melamine Formaldehyde (BUMF) and Blocked Isocyanate combined with PF (BPF) resins were synthesized. The resin system (10%,12%,14%) with requisite additive was admixed with rice straw and wood fibers.  According to the resin system employed, the hot press temperature, specific pressure and curing time were worked out for compression of the boards. The boards were produced with 780 - 850 kg/m3 nominal density and prior to testing, the test specimens were exposed to an atmosphere maintained at a relative humidity of 65 ± 5 percent and at a temperature of 27 ± 2 °C until their masses are nearly constant. The boards made were subjected for evaluation of physical and mechanical properties according to IS 3087.  It was found that the Rice Straw particles with Wood Fibers of 50-50 combination bonded with PCF and also with MUF adhesive of 12 % resin solids confirms  to the requirement of  physical and mechanical properties as per IS 3087 particleboards of wood and other lignocellulosic materials (medium density) for general purposes Specification.  Comparison with resin for hybrid boards of rice straw particles with wood fiber, BPCF has shown excellent properties than BPF and BUMF. The study indicated that increasing the percentage replacement of wood fibers with rice straw particles by more than 50 % decreased the internal bond strength.   It can be concluded that rice straw pulverized particleboard can be successfully made with the combination of 30 % - 50 % wood fibers using PCF resin or BPCF resin.","PeriodicalId":513241,"journal":{"name":"Maderas-Cienc Tecnol","volume":"28 10","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-03-28","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"140373075","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Fire performance of Pinus taeda wood treated with zinc borate before and after leaching","authors":"Álvaro A. Camargo, C. M. Ibáñez","doi":"10.22320/s0718221x/2024.35","DOIUrl":"https://doi.org/10.22320/s0718221x/2024.35","url":null,"abstract":"Owing to its physico-mechanical properties, wood is widely used in housing for both outdoor structures and indoors in floors, ceilings and others. However, its vulnerability to fire makes protection necessary for occupant safety and damage prevention. In this study, the fire performance of Pinus taeda (loblolly pine) wood from northeastern Uruguay treated with zinc borate  synthetized in our laboratory is tested. The effect of leaching on zinc borate fire retardant properties was also evaluated. The following parameters associated with the thermal degradation process of wood were analyzed: flame spread, carbonized area, carbonization index and mass loss. The wood was radially and tangentially exposed to the flame in a Vandersall tunnel under controlled conditions for three exposure times: 30, 60, and 80 seconds. The micromorphology of the surfaces exposed to the flame at each exposure time was analyzed with a scanning electron microscope in order to evaluate fiber damage, zinc borate distribution within the wood, and the effects of leaching on fire performance. A clear improvement in the fire resistance of the zinc borate -treated wood could be verified for all exposure times; leaching did not affect its fire retardant properties despite the harsh conditions of the test, making the product potentially suitable for outdoor use.","PeriodicalId":513241,"journal":{"name":"Maderas-Cienc Tecnol","volume":"181 3","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-03-04","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"140265678","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Relationship between acoustic wave velocity and mechanical properties in Acacia mangium wood","authors":"Doan Van Duong, Masumi Hasegawa","doi":"10.22320/s0718221x/2024.33","DOIUrl":"https://doi.org/10.22320/s0718221x/2024.33","url":null,"abstract":"There is a strong interest in developing and using acoustic technology to evaluate the mechanical properties of wood in situations where a static bending test is not feasible to undertake. In this study, the mechanical properties of Acacia mangium (black wattle) wood were predicted by using stress wave and ultrasonic wave methods. The values of dynamic modulus of elasticity based on stress wave and ultrasonic wave were 9,29 % and 4,75 % higher than those obtained from static modulus of elasticity, respectively. There was no statistically significant correlation between acoustic velocity and mechanical properties measured by destructive tests. The strong experimental correlation coefficients were found between stress wave and modulus of elasticity (r = 0,94; P < 0,001), and ultrasonic wave and modulus of elasticity (r = 0,83; P < 0,001). This result indicates that stress wave and ultrasonic wave techniques are suitable for predicting the static modulus of elasticity of Acacia mangium (black wattle) wood if the density of the measured elements is known. There was no dependence of wood density and acoustic propagation velocity measured in this study, whereas statistically significant correlations were found between the fiber length with stress wave velocity (r = 0,44; P < 0,05) and ultrasonic velocity (r = 0,48; P < 0,05).","PeriodicalId":513241,"journal":{"name":"Maderas-Cienc Tecnol","volume":"9 2","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-01-31","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"140479093","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Evaluation of OSB panels using residual wood with low contents of castor oil polyurethane resin","authors":"G. Barbirato, Wanley Eduardo Lopes Junior, R. Martins, Cristiane Inácio de Campos, J. Fiorelli","doi":"10.22320/s0718221x/2024.32","DOIUrl":"https://doi.org/10.22320/s0718221x/2024.32","url":null,"abstract":"The use of residues from human activities has been currently gaining ground in the national and international markets, aiming toward the production of more sustainable materials that are less aggressive to the environment. Reusing and adding value to new products has also become an important factor in reducing production costs and the best alternative for this is process optimization. The choice for residual balsa wood was due to its rapid growth and low density, as well as for its ease of engineering and determining the ideal amount of resin for different types of panels. This study aims to investigate the influence of the content variation of castor oil-based polyurethane resin on the physical and mechanical properties of OSB board particles made from residual balsa wood in reforestation areas. The panels were produced with 8, 10, and 12 % commercial castor oil-based polyurethane resin and 9 mm long particles; their physical and mechanical characterizations followed international normative recommendations. The results indicated that the panels with resin contents higher than 10 % reached the minimum regulatory requirements for type 2 OSB panels, suitable for structural application. On the other hand, the panels produced with 8 % resin reached the minimum requirements for type 1 OSB panels, suitable for non-structural use by the furniture industry, such as linings and partitions. Therefore, our study concludes that the variation of resin contents for OSB panels of residual balsa wood allowed us to achieve optimal levels for the use of castor oil-based polyurethane resin, reaching minimum values recommended by regulations for OSB panels type 1 and 2 and a great possibility of application of this product for engineered materials.","PeriodicalId":513241,"journal":{"name":"Maderas-Cienc Tecnol","volume":"377 ","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-01-30","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"140480662","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"The effect of adding graphene oxide to urea formaldehyde resin and its efficacy on three layered particleboard","authors":"Seyed Meysam Mousazadeh, Loya Jamalirad, Farshid Faraji, Ali Abdolkhani","doi":"10.22320/s0718221x/2024.31","DOIUrl":"https://doi.org/10.22320/s0718221x/2024.31","url":null,"abstract":"The research for improving adhesives and the properties of wood composites is always important for industry. The aim of this study is investigating the effect of adding graphene oxide in the UF resin on the functional properties of particleboard panels with an average thickness of 16 mm. The influence of graphene oxide content (0; 0,25 %; 0,5 % and 0,75 % based on the dry weight of the UF resin) and pressing time (4 and 5 minutes) on the internal bonding, bending strength, modulus of elasticity and dimensional stability were studied. The results showed that the use of graphene oxide in the UF resin caused an improvement of the mechanical and physical properties of the particleboards. Also, comparing two different pressing times, the boards made by 4 minutes with graphene oxide is preferred without negative effect on the functional properties of particleboards.","PeriodicalId":513241,"journal":{"name":"Maderas-Cienc Tecnol","volume":"35 2","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-01-24","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"139602432","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Anatomy based papermaking potential of some woody plants under different ecological conditions","authors":"Kamile TIRAK HIZAL, T. Birtürk","doi":"10.22320/s0718221x/2024.30","DOIUrl":"https://doi.org/10.22320/s0718221x/2024.30","url":null,"abstract":"The increasing use of wood in the forest industry and reduction of forest resources have prompted the paper industry to look for new materials. To this end, this study examined the biometric coefficients of the seven woody stems grown in different regions and investigated suitability for papermaking as an alternative to the use of wood. Wood samples of each species were collected from two different regions in Türkiye: the Kozan region, which has a Mediterranean climate, and the Yuvacık region, which has a mostly oceanic climate.  The species included in the study were Phillyrea latifolia (mock privet), Arbutus andrachne (greek strawberry tree), Erica arborea (tree heath), Spartium junceum (spanish broom), Laurus nobilis (bay tree), Pistacia turpentine (cyprus turpentine tree), and Rhus coriaria (elm-leaved sumac). All fibers were classified as short. The longest fiber was observed for Spartium junceum (spanish broom) in Kozan. The fiber diameter was highest for Arbutus andrachne (greek strawberry tree) from Kozan, followed by Rhus coriaria (elm-leaved sumac) from Yuvacık and Laurus nobilis (bay tree) from Kozan. The fiber dimensions and the relationship between them were statistically analyzed. These included the slenderness ratio, flexibility coefficient, Runkel ratio, rigidity coefficient, Luce’s shape factor, F-factor, and Muhlsteph ratio. Although differences in fiber properties were detected between the two regions, it was determined that these were not enough to affect the desired properties for paper production. It was concluded that the fibers could be used in pulp, paperboard, and corrugated board production when mixed with long fibers.  ","PeriodicalId":513241,"journal":{"name":"Maderas-Cienc Tecnol","volume":"79 5","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-01-24","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"139601830","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}