{"title":"Improvement of superhydrophobic properties of soft materials based on surface texture design","authors":"Chunyu Wang, Rongzhi Li, Chen Liu, Bangbang Ma, Keke Zhang, Ning Zhang, Qianqian Wang, Sheng Zhang","doi":"10.1088/2051-672x/ad5dd1","DOIUrl":"https://doi.org/10.1088/2051-672x/ad5dd1","url":null,"abstract":"\u0000 Superhydrophobic surfaces of rigid materials have been widely studied, which usually have excellent physical properties. However, the soft materials are rarely investigated. In order to explore ways to improve the superhydrophobic properties of soft materials, different textured structures were fabricated by the inverted molding method on three materials, including food-grade silica gel, industrial-grade mold silica gel, and PDMS. Further, a series of experiments were carried out, including water contact angle measurement, self-cleaning test, and drop-bounce test. The results show that hydrophobicity is highly related to both material and texture characteristics. For the same material, the contact angle can be greatly improved by surface micro-texture, and the contact angle of PDMS can be increased to 159.3°. Moreover, texture features and parameters are introduced to quantitatively analyze the contact angle of textured. It can be predicted that the soft materials with textured superhydrophobic properties will have greater applications in biomedicine, bionic sensors, flexible solar cells, and other fields.","PeriodicalId":509953,"journal":{"name":"Surface Topography: Metrology and Properties","volume":"19 12","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-07-02","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"141685951","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Surface Dynamics and Electrochemical Examination of Co3O4 Films by Iron Doping","authors":"Emin Yakar, Fatma Sarf, M. Bayirli, A. Ilgaz","doi":"10.1088/2051-672x/ad56a5","DOIUrl":"https://doi.org/10.1088/2051-672x/ad56a5","url":null,"abstract":"\u0000 This study focused on Co3O4 films, which were prepared by cost-effective chemical bath deposition on In:SnO2 (ITO) substrates with iron doping concentrations ranging from 2 to 6 mol %. Structural properties were investigated by XRD as well as nanotexture of Fe:Co3O4 films was captured via SEM and detailed fractal analysis was analyzed in each prepared film. Effective using of prepared Fe:Co3O4 electrodes for electrochemical charge storage applications has been examined by using CV and EIS. From x-ray patterns, spinel cubic structure of Co3O4 was observed in all samples, while peaks with Co2O3 and substrate indexed peaks were also shown. Pure and iron doped Co3O4 surfaces have spherical agglomerative forms while porous structures were observed in 4% Fe:Co3O4 samples. Redox peaks induced by Faradaic reactions in the CV plots present pseudo-capacitive nature for all electrodes and improves charge transfer process in 4% Fe:Co3O4 and 6% Fe:Co3O4 from EIS measurements. Additionally, using scaling theory, the coverage ratio, fractal dimensions, cluster sizes and interface critical exponent values of the superficial hetero morphology of the samples are calculated. While the coating rate decreases according to the iron concentration, fractal dimensions increase. However, as the number of clusters increases, the average cluster size decreases. The interface critical exponent value shows an irregular change.","PeriodicalId":509953,"journal":{"name":"Surface Topography: Metrology and Properties","volume":"72 22","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-06-11","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"141357776","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Ziqiang Zhang, Junye Li, Tiangang Zou, Wei Hou, Yuanyuan An, Jianhe Liu
{"title":"Effect of bionic texture on the lubrication efficiency and mechanical efficiency for rotating gears","authors":"Ziqiang Zhang, Junye Li, Tiangang Zou, Wei Hou, Yuanyuan An, Jianhe Liu","doi":"10.1088/2051-672x/ad557b","DOIUrl":"https://doi.org/10.1088/2051-672x/ad557b","url":null,"abstract":"\u0000 In order to enhance lubrication effectiveness and transmission efficiency in gear transmission, it is imperative to minimize mechanical efficiency losses and frictional wear of the gears during the lubrication process. This paper proposes a bionic design scheme for the tooth surface structure of gears based on the surface texture of bay scallop shells, considering the operational conditions within the gearbox. Firstly, the microstructure of the bay scallop shell surface is analyzed, and a bionic gear mapping model based on the bay scallop shell surface is established. Meanwhile, the oil coverage rate and convective heat transfer coefficient of gear surfaces with different textures was analyzed using finite element analysis. The results showed that the oil coverage rate of gear tooth surfaces with bionic fringes surpassed that of conventional gear lubrication. Thirdly, based on the jet lubrication test calculation, it is proposed that the bionic gear exhibits a smaller torque compared to conventional gears, while the mechanical efficiency of arc groove bionic gear type surpasses that of vertical groove gears. Finally, the optimal structure of the arc groove gear was predicted through orthogonal data analysis, and the validity of the data prediction was verified through experiments and simulations. The optimal combination of texture parameters for the arc groove gear is as follows: a texture depth of 225μm, a texture width of 275μm, a texture interval of 275μm, and a texture length of 1600μm. As a result, lubrication efficiency increased by 41.98%, heat dissipation efficiency increased by 32.21%, and mechanical efficiency increased by 89.39%.","PeriodicalId":509953,"journal":{"name":"Surface Topography: Metrology and Properties","volume":"17 9","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-06-07","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"141375417","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Guoliang Zhang, Qiu Li, De Sun, Xin Ye, Xiaolong Yi, Wei Fang, Zhitao Luo
{"title":"Effect of pulse electroplating parameters on the morphology and corrosion resistance of Ag plating coating","authors":"Guoliang Zhang, Qiu Li, De Sun, Xin Ye, Xiaolong Yi, Wei Fang, Zhitao Luo","doi":"10.1088/2051-672x/ad557a","DOIUrl":"https://doi.org/10.1088/2051-672x/ad557a","url":null,"abstract":"\u0000 Pulse electroplating technology has the characteristics of fine grain and good corrosion resistance. In order to ensure the good application of electroplated silver cone cavity in solar radiation detector. The effects of three process parameters, including average current density (0.4-1 A/dm2), pulse on-time (0.2-1.8 ms) and pulse off-time (0.8-4.8 ms), on the deposition rate, appearance and corrosion resistance of silver coating were studied by control variates. The surface morphology and composition of silver coatings were studied by scanning electron microscope (SEM), laser confocal microscopy and energy dispersive X-ray spectrometer (EDX). The corrosion resistance of silver coating in 3.5 wt.% NaCl solution was studied by polarisation curves and electrochemical impedance spectroscopy. The results show that pulse electroplating takes advantage of the dynamic change of current to influence the size of deposited particles and the degree of densification of the coating by precisely adjusting the pulse plating parameters, and ultimately obtains the coating with excellent morphology. The optimal parameters are: average current density 0.6 A/dm2, pulse on-time 1.2 ms, pulse off-time 1.8 ms. The silver coating prepared under process conditions has excellent corrosion resistance (7059 Ω/cm2). The surface crystal grain is dense, without obvious defects.","PeriodicalId":509953,"journal":{"name":"Surface Topography: Metrology and Properties","volume":" 36","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-06-07","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"141373453","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Fan Zhang, Di Xu, Lingwei Ma, Jinke Wang, Hao Chen, Shiyi Guo
{"title":"Preparation and properties of modified SiO2/epoxy resin superhydrophobic coating","authors":"Fan Zhang, Di Xu, Lingwei Ma, Jinke Wang, Hao Chen, Shiyi Guo","doi":"10.1088/2051-672x/ad5579","DOIUrl":"https://doi.org/10.1088/2051-672x/ad5579","url":null,"abstract":"\u0000 In this study, a superhydrophobic coating with excellent mechanical durability, chemical stability, anti-icing property and self-cleaning property was developed based on epoxy resin integrated with modified SiO2 nanoparticles (m-SiO2 NPs). The surface morphology and roughness of the coating were finely controlled by changing the content of m-SiO2 NPs, with optimal hydrophobicity and self-cleaning efficiency observed at the m-SiO2 NPs incorporation of 30 wt.%. Benefitting from the three-dimensional stable micro-nano structure on the coating surface, the coating exhibited durable hydrophobicity upon multiple tape-peeling damages and good resistance to both acidic and alkaline corrosive environments. Furthermore, the SiO2-EP coating showed a prominent anti-icing property which could delay the water freezing time from 96 s to 650 s. This coating underscored its potential for applications in environments prone to ice formation.","PeriodicalId":509953,"journal":{"name":"Surface Topography: Metrology and Properties","volume":"11 4","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-06-07","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"141375642","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Qian Zhang, Yonghua Wang Yonghua Wang, Zhongxu lian, Yuandong Jiao
{"title":"One-Step Laser Preparation of Unidirectional Liquid Spontaneous Transport Structures","authors":"Qian Zhang, Yonghua Wang Yonghua Wang, Zhongxu lian, Yuandong Jiao","doi":"10.1088/2051-672x/ad54dd","DOIUrl":"https://doi.org/10.1088/2051-672x/ad54dd","url":null,"abstract":"\u0000 The Tilted Wedge Microcavity Array (TWMA) structure of the Nepenthes alata peristome allows for unidirectional fluid transport without any surface energy gradient. However, current methods of creating bionic Nepenthes alata peristome structures have significant improvement room in terms of structural shape, machining efficiency, and cost-effectiveness. To address these issues, in this paper, bionic Nepenthes alata peristome TWMA structures on 7075 aluminium alloy was built via a nanosecond laser with highly efficiency, low cost and flexible processing pattern. A unilateral tilted microcavity structure was fabricated by designing the laser processing path, and at the same time, the samples were tilted to change the angle at which the laser beam hit the working surface. This ensures that the microcavity is machined without destroying the microcavity structure underneath. The variation law of aluminum alloy ablation threshold under the influence of laser incidence angle was studied. The dimensional parameters of the TWMA structure were analysed in relation to laser incidence angle θ, laser processing power P, number of laser scans n, and laser scanning speed V. Additionally, liquid spreading tests were carried out on different surfaces of bionic structures, and the influence of surface wettability on the spreading results was investigated. The results indicate that the ablation threshold decreases initially and then increases with an increase in the laser incidence angle. This reflects the trend of the aluminium alloy absorption rate, which initially increases and then decreases with an increase in the incidence angle. For the prepared TWMA structure, the optimum speed of achieving the unidirectional spreading effect was found to be 2.41 mm/s with a surface contact angle (CA) of 35°. This study presents a low-cost and rapid preparation method for creating liquid unidirectional transport structures without any energy input.","PeriodicalId":509953,"journal":{"name":"Surface Topography: Metrology and Properties","volume":"151 S619","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-06-06","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"141376208","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Thickness measurement of thin films using atomic force microscopy based scratching","authors":"B. Vasić, Sonja Aškrabić","doi":"10.1088/2051-672X/ad54de","DOIUrl":"https://doi.org/10.1088/2051-672X/ad54de","url":null,"abstract":"Thin-film thickness measurements using atomic force microscopy (AFM) comprise two steps: 1. AFM scratching in order to produce an exposed film edge, and 2. subsequent AFM measurement of the corresponding step height across the exposed edge. Although the technique is known, many open questions have limited its wider applications. In order to clarify the open questions, here we first demonstrate how to determine the normal force applied during the scratching in contact mode needed to completely remove films from substrates. In order to determine film thickness from processed AFM images, we discuss two procedures based on the histogram method and polynomial step-function fitting. Mechanisms of the scratching process are elucidated by the analysis of lateral forces and their enhancement during the film peeling. Phase maps of scratched domains recorded in amplitude modulation AFM (tapping) mode display a clear contrast compared to pristine films. Therefore, we suggest their utilization as simple indicators of spatial domains with completely removed films. As an example, here the measurements were done on polymer films fabricated by layer-by-layer deposition of oppositely charged polyelectrolytes composed of poly(allylamine hydrochloride) and poly(sodium 4-styrenesulfonate), while the applicability of the presented method on other materials is discussed in detail.","PeriodicalId":509953,"journal":{"name":"Surface Topography: Metrology and Properties","volume":"98 5","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-06-06","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"141378065","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
M. Ran, Shenqing Xiao, Mingliang Li, Ruiqi Jiang, Xinglin Zhou, Yiqiu Tan
{"title":"Exploring the relationship between pavement mean texture depth and mean profile depth: from theoretical derivation to field results","authors":"M. Ran, Shenqing Xiao, Mingliang Li, Ruiqi Jiang, Xinglin Zhou, Yiqiu Tan","doi":"10.1088/2051-672X/ad54dc","DOIUrl":"https://doi.org/10.1088/2051-672X/ad54dc","url":null,"abstract":"Pavement mean texture depth (MTD) and mean profile depth (MPD) are common evaluation indicators for characterizing the pavement surface. Clarifying the relationship between the two contributes to coordinate various measurement methods and evaluation criterions. The calculation methods of MTD and MPD were first introduced to trace the similarity between the indicators. Subsequently, the tortuosity area of surface texture was observed using x-ray Computer Tomography (CT). To further determine the model parameter, over 3000 sets of field data in Research Institute of Highway Ministry of Transport (RIOH) track were measured. Meanwhile, the field results of another track and existing recommended model were also used to validate the model. The results show that the shift relationship between MTD and MPD is theoretically unified into a linear model with a slope of 1 and an intercept related to the surface tortuosity. These tortuous areas, the main difference source between the two indicators, would lead to a greater equivalent texture depth under the coarser gradation or lower the compactness of the asphalt mixture. Even for the different track roads, the determined model (MTD = MPD + 0.03) has a lower mean relative estimation error, indicating good applicability. This study provides theoretical explanation and empirical references for the automated laser-based texture detection.","PeriodicalId":509953,"journal":{"name":"Surface Topography: Metrology and Properties","volume":"27 1","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-06-06","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"141381955","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Synthesis, Mechanical and Tribological Behaviours of Boron Nitride reinforced AA7075 Composites Produced by Stir Casting Technique","authors":"R. Ranjith Kumar, M. Ravichandran, S. Alagarsamy","doi":"10.1088/2051-672x/ad4fa8","DOIUrl":"https://doi.org/10.1088/2051-672x/ad4fa8","url":null,"abstract":"\u0000 This experimental investigation focused on synthesis of aluminium 7075-boron nitride (BN) composites (AA7075-BN), using stir casting technique. Four various proportions of BN of 0, 4, 8 and 12 wt.% were used for the production of the composites. Scanning electron microscopy (SEM) was used to study the microstructure of the prepared composites. Using a pin-on-disc equipment, wear test was performed to analyse the tribological characteristics of the as-casted composites. The wear rate (WR) and the co-efficient of friction (COF) were determined by altering the input parameters, such as reinforcement (R), applied load (L), sliding velocity (V) and sliding distance (D). A grey relational technique (GRT) was applied to determine the appropriate conditions of parameters and showed low WR and COF for the composites. From the experimental results obtained, the least density of the composite was 2.70 g/cm 3 for AA 7075-12 wt.% BN. The mechanical properties of the composites were significantly improved. The highest tensile strength of 210 MPa was obtained from the same AA 7075-12 wt.% BN. There was 26% of improvement in the tensile strength with 4 wt.% of BN reinforcement in AA7075 matrix. Finally, the worn surface morphology confirmed plough and furrow formations on the AA 7075- 4wt.% BN and AA 7075-8 wt.% BN composites, respectively. Therefore, the applications of the various composites depend on their responses to the properties, as studied.","PeriodicalId":509953,"journal":{"name":"Surface Topography: Metrology and Properties","volume":"26 22","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-05-23","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"141104284","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Integrated form-position measurement of large-aperture transparent elements based on stereoscopic phase measuring deflectometry","authors":"Ting Chen, Peide Yang, W. Lang, Yunuo Chen, Wei Wang, Xiangchao Zhang","doi":"10.1088/2051-672x/ad4fa9","DOIUrl":"https://doi.org/10.1088/2051-672x/ad4fa9","url":null,"abstract":"\u0000 In the field of ultra-precision manufacturing and measurement, sub-aperture stitching is a widely employed technique for the measurement of complex optical components. Those influencing factors like system errors and numerical bias introduce notable stitching errors in the overlapped areas between sub-apertures, consequently degrading measurement accuracy. In addition, the surfaces forms, refractive indices, and positions are difficult to be specified simultaneously. In this paper, an integrated measurement method based on the stereo deflectometry is proposed, which can measure the surface form, refractive index, and relative position of large-aperture transparent components together. This method utilizes a Gaussian process regression model to decouple and predict the refractive index and relative positions of the upper and lower surfaces. Then, a robust sub-aperture stitching technique with an adaptive distance function is employed to correct the positioning errors of sub-apertures. The feasibility and effectiveness of this method are demonstrated. The final stitched surface results exhibit a measurement error of 320 nm and a thickness deviation of 28 µm.","PeriodicalId":509953,"journal":{"name":"Surface Topography: Metrology and Properties","volume":"12 20","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-05-23","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"141104647","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}