Modern Physics Letters B最新文献

{"title":"Preparation, structure and spectral characteristics of Zinc tellurite glasses system doped with different concentrations of Tm3+","authors":"Yan Fang, Chongjun He, Fangzhou Chen, Yiyang He, Yuangang Lu, Lijuan Liu, Mingjun Xia, Chenguang Deng, Qian Li, Huiting Chen","doi":"10.1142/s0217984924503822","DOIUrl":"https://doi.org/10.1142/s0217984924503822","url":null,"abstract":"Gallium-tellurite glass is a new optical material with good transmittance in the infrared region up to 6.5[Formula: see text][Formula: see text]. Three different tellurate glasses were prepared: TeO2–ZnO–Ga2O3(TZG), TeO2–ZnO–La2O3(TZL) and TeO2–ZnO–B2O3(TZB). X-ray diffraction indicates that no crystal precipitates in the three glass systems, which maintain a stable glass state. Raman scattering experiments and fluorescence emission spectroscopy measurements were carried out on the tellulate glasses doped with the same concentration of Tm[Formula: see text]. It was found that the phonon energy of TZG(TeO2–ZnO–Ga2O3)-doped thulium glass is the lowest, and the emission light at 1380[Formula: see text]nm is the strongest with [Formula: see text][Formula: see text]nm fluorescence FWHM. These results show that Tm-doped TZG glass is a good luminescent material. Refractive indices were measured by the minimum deviation method. Sellmeier dispersion equation is obtained, which can be used to calculate the refractive index within visible and near-infrared spectral range. Furthermore, different Tm[Formula: see text] concentrations (0.4%, 0.8%, 1.2% and 2%) TZG glasses were prepared, the emission spectra and fluorescence lifetime were measured, and the emitted light was strongest when the thulium ion doping concentration is 1.2%. All the results suggest that these newly developed ternary tellurite glass systems are promising candidates for near/mid-infrared laser glass fibers, fiber amplifiers, or lasers.","PeriodicalId":503716,"journal":{"name":"Modern Physics Letters B","volume":"27 24","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-05-22","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"141109798","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Joule heating effects on triple diffusive free convective MHD flow over a convective surface: A Lie-group transformation analysis","authors":"Ammara Islam, Zafar Mahmood, Umar Khan, Bilal Ali, Md Irfanul Haque Siddiqui","doi":"10.1142/s0217984924504128","DOIUrl":"https://doi.org/10.1142/s0217984924504128","url":null,"abstract":"This work integrates the Boussinesq approximation and magnetohydrodynamic effects to investigate the dynamics of incompressible triple diffusive fluid flow along a linearly stretched surface. Novel insights are revealed by contrasting instances with opposing and helpful flows. The partial differential equations are symmetrically reduced using Lie-group transformations, which make the Runge–Kutta shooting technique easier to solve. The effects of concentration buoyancy ratio, magnetic parameter, concentration parameter, and Lewis number on temperature, velocity, and concentration profiles are explained through graphical displays. Our results show that in both flow situations, the velocity distribution is decelerated by the magnetic parameter, and the salt concentration distributions are similarly affected by buoyancy ratio factors. Additionally, a higher Lewis number is associated with lower mass and heat transfer rates in the opposing and assisting fluid.","PeriodicalId":503716,"journal":{"name":"Modern Physics Letters B","volume":"1 10","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-05-22","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"141108339","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Viscous dissipation and Joule heating in case of variable electrical conductivity Carreau–Yasuda nanofluid flow in a complex wavy asymmetric channel through porous media","authors":"Sameh E. Ahmed, A. Arafa, Sameh A. Hussein","doi":"10.1142/s021798492450369x","DOIUrl":"https://doi.org/10.1142/s021798492450369x","url":null,"abstract":"This paper focuses on flow structures and thermal fields of the Carreau–Yasuda (CY) nanofluid model through a two-dimensional, wavy, complicated vertical asymmetrical conduit filled with porous elements. Formulations of the viscous dissipation in the case of CY nanofluids are derived and nonlinear radiation flux as well as joule heating are examined. Buongiorno’s nanofluid approach, which involves Brownian motion and thermophoresis aspects is considered. The electrical conductivity of the suspension is considered as a variable where it depends upon the ambient temperature and concentration distributions and the Joule heating impacts are not neglected. The approach of solving the problem is contingent upon converting the system to dimensionless form then the lubrication approach with low magnetic Reynold numbers is applied. Numerical solutions are found for the resultant system, and wide ranges are considered for Weissenberg number We, non-Newtonian parameter n and Darcy number [Formula: see text], namely, [Formula: see text], [Formula: see text] and [Formula: see text], respectively. The major results indicated that gradients of the pressure are higher in case of shear thickening [Formula: see text] comparing to in the instance of shear thinning [Formula: see text]. Also, the velocity is enhanced, close to the channel’s lowest portion, as the Weissenberg number is growing. The variable electrical conductivity gives a higher mass transfer rate compared to the constant property.","PeriodicalId":503716,"journal":{"name":"Modern Physics Letters B","volume":"82 7","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-05-21","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"141116312","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Delay volterra integrodifferential models of fractional orders and exponential kernels: Well-posedness theoretical results and Legendre–Galerkin shifted approximations","authors":"Hind Sweis, N. Shawagfeh, O. A. Arqub","doi":"10.1142/s0217984924503792","DOIUrl":"https://doi.org/10.1142/s0217984924503792","url":null,"abstract":"The utilized research work studies the well-posedness theoretical results and Galerkin-shifted approximations of delay Volterra integrodifferential models of fractional orders and exponential kernels in linear and nonlinear types in the Caputo–Fabrizio sense. Schauder’s and Arzela–Ascoli’s theorems are employed to prove a local existence theorem. After that, the Laplace continuous transform is employed to establish and confirm the global well-posedness theoretical results for the presented delay model. For numerical solutions, the Legendre–Galerkin shifted approximations’ algorithm has been used by the dependence on the orthogonal Legendre shifted polynomials to find out the required approximations. Utilizing this scheme, the considered delay model is reduced to an algebraic system with initial constraints. The algorithm precision, error behavior, and convergence are studied. Several numerical experiments together with several tables and figures are included to present the performance and validation of the algorithm presented. At last, some consequences and notes according to the given consequences were offered in the final section with several suggestions to guide future action.","PeriodicalId":503716,"journal":{"name":"Modern Physics Letters B","volume":"21 22","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-05-21","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"141118201","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Stability analysis and retrieval of new solitary waves of (2+1)- and (3+1)-dimensional potential Kadomtsev–Petviashvili and B-type Kadomtsev–Petviashvili equations using auxiliary equation technique","authors":"Fatma Nur Kaya Sağlam, Shabir Ahmad","doi":"10.1142/s021798492450413x","DOIUrl":"https://doi.org/10.1142/s021798492450413x","url":null,"abstract":"The Kadomtsev–Petviashvili (KP) equations are nonlinear partial differential equations which are widely used for the modeling of wave propagation in hydrodynamic and plasma systems. This study aims to make a valuable contribution to the literature by providing new solitary waves to the (2+1)- and (3+1)-dimensional potential Kadomtsev–Petviashvili (pKP)-B-type Kadomtsev–Petviashvili (BKP) equations. For this, the auxiliary equation method associated with Bernoulli equation is used and new solutions for the considered equations are obtained. The stability of obtained solutions is demonstrated using nonlinear analysis. It is shown that this method for the considered pKP–BKP equations is an important step forward in an overall mathematical framework for similar equations.","PeriodicalId":503716,"journal":{"name":"Modern Physics Letters B","volume":"65 6","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-05-21","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"141116810","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Impacts of activation energy and electroosmosis on peristaltic motion of micropolar Newtonian nanofluid inside a microchannel","authors":"N. Eldabe, M. Y. Abouzeid, M. Abdelmoneim, M. Ouaf","doi":"10.1142/s0217984924504074","DOIUrl":"https://doi.org/10.1142/s0217984924504074","url":null,"abstract":"This study investigates the impact of electroosmosis on the peristaltic flow of unsteady micropolar nanofluid with heat transfer. The findings could enhance the design of peristaltic pumps, potentially improving drug delivery systems, simulations of blood flow in medical devices, and cancer treatments. The fluid under investigation adheres to a micropolar model and flows through a microchannel that exhibits peristalsis along its walls. Moreover, the system is subjected to various external effects, including a uniform magnetic field, the electroosmotic phenomenon, heat absorption, and a chemical reaction with activation energy. Consequently, the problem is mathematically modulated by a system of nonlinear partial differential equations governing the velocity, temperature, and nanoparticle concentration. By employing wave transformation, these governing equations are reduced to ordinary differential equations (ODEs). The reduced equations were solved both analytically, using the homotopy perturbation method, and numerically, using the Runge–Kutta–Merson method. A comparison was made between the solutions, which were found to be closely aligned. Furthermore, a series of figures were employed to provide visual representation and discussion of the implications of the physical properties. The calculations reveal that the electroosmotic flow (EOF) enhances the axial flow of the micropolar fluid along the direction of the applied electric field. It is also observed that the increase in the activation energy (which indicates a low reaction rate) increases the concentration profile whereas the increase in the reaction rate parameter reduces the concentration profile. Additionally, the spin velocity of the particles is diminished by either an increase in the magnetic parameter or the coupling parameter.","PeriodicalId":503716,"journal":{"name":"Modern Physics Letters B","volume":"44 3","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-05-21","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"141114406","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Constructing the soliton wave structure to the nonlinear fractional Kairat-X dynamical equation under computational approach","authors":"M. Iqbal, Dianchen Lu, A. Seadawy, F. A. Alomari, Zhanar Umurzakhova, R. Myrzakulov","doi":"10.1142/s0217984924503962","DOIUrl":"https://doi.org/10.1142/s0217984924503962","url":null,"abstract":"In this paper, the nonlinear fractional Kairat-X equation is investigated on the basis of computational simulation. The nonlinear fractional Kairat-X equation is an integrable equation and is used to explain the differential geometry of curves and equivalence aspects. Several kinds of solitary wave structures of the nonlinear fractional Kairat-X equation are established successfully via the implantation of the extended simple equation method. Here, we explore the interesting, novel and general solutions in trigonometric, exponential, and rational types, which represent periodic wave solitons, mixed solitons in the shape of bright–dark solutions, kink wave solitons, peakon bright and dark solitons, anti-kink wave solutions, bright solitons, dark solitons, and solitary wave structure. The physical structures of secured results, aided by numerical simulation, have numerous applications in applied sciences such as optical fiber, geophysics, laser optics, mathematical physics, nonlinear optics, nonlinear dynamics, communication system, and engineering. This study explores the physical behavior of models through the visualization of solutions in contour, 2D and 3D plots by revealing that these solutions yield profitable results in the field of mathematical physics. The study demonstrates that the proposed technique is more reliable, efficient, and powerful in analyzing nonlinear evolution equations in various domains of science.","PeriodicalId":503716,"journal":{"name":"Modern Physics Letters B","volume":"101 51","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-05-18","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"141125229","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Aluminum oxide droplet collisions: Molecular dynamics study","authors":"Lei Wang, Mengjun Wang, Pingan Liu, Xi Huang, Zhengtao Ji, Song Gao","doi":"10.1142/s021798492450372x","DOIUrl":"https://doi.org/10.1142/s021798492450372x","url":null,"abstract":"In this work, the induced coalescence mechanism and dynamic contact behavior of alumina (Al2O3) droplets at different impact velocities were investigated for the first time from a microscopic point of view by molecular dynamics (MD) methods through the analysis of axial speed, shrinkage, neck radius ratio, contact force, temperature, kinetic energy, surface energy, and the amount of change in the internal energy of the droplets. The results show that the minimum speed at which collisional coalescence of Al2O3 droplets occurs is 30 m/s. When the speed is lower than 30 m/s, the droplets undergo bounce phenomena due to the Coulomb force. Under the high-speed impact, the inertia force of Al2O3 droplets acts less than the surface tension and viscous resistance. The droplets don’t get squashed in the whole collision process. For the different initial velocities, the magnitude of the contact force on a unilateral droplet during the collision process does not always increase with speed. When the collision speed is not higher than 400[Formula: see text]m/s, the contact force on the droplets eventually stabilizes at about 0.28[Formula: see text]Kcal/(mol⋅Å), whereas this value is about 0.36[Formula: see text]Kcal/(mol⋅Å) and about 0.5[Formula: see text]Kcal/(mol⋅Å) for the intervals from 500[Formula: see text]m/s to 700[Formula: see text]m/s and from 800[Formula: see text]m/s to 1000[Formula: see text]m/s, respectively. The increase of the droplet’s initial speed has a limited contribution to the temperature of the system after the collision, and the amount of loss of the total energy (the sum of kinetic energy, surface energy, and internal energy changes) becomes more pronounced, even up to about 20% when the speed reaches 900[Formula: see text]m/s. At the same time, we predicted the Al2O3 melting point and compared it with the standard melting point with an error of 2%, proving the accuracy of the model. This work can strengthen our understanding of the industrial processes with applications in high-energy nanomaterials, rocket propellants, rocket structure design and performance optimization.","PeriodicalId":503716,"journal":{"name":"Modern Physics Letters B","volume":"124 37","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-05-18","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"141125437","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Ca2+-doped DyTa3O9: A novel rare-earth tantalate high emissivity material","authors":"Jiaqi Li, Jianyu Li, Bin Xu, Zhiyi Ren, Shixiao Yan, Di Zhang, Meng Wang, Xiaoliang Sun, Chi Liu, Jing Feng","doi":"10.1142/s0217984924503913","DOIUrl":"https://doi.org/10.1142/s0217984924503913","url":null,"abstract":"This work aims to investigate the influence of Ca[Formula: see text] doping on the infrared emission properties of DyTa3O9 ceramics. DyTa3O9 is considered a promising high-temperature thermal protection material due to its low thermal conductivity and good high-temperature stability. However, there is currently no research on the infrared radiation performance of such materials. We synthesized DyTa3O9 ceramics with different Ca[Formula: see text] doping concentrations using the solid-phase reaction method and systematically investigated the effect of doping concentration on the infrared emissivity of DyTa3O9 ceramics. When Ca[Formula: see text] is doped into the DyTa3O9 lattice, the original Dy elements are replaced by Ca, resulting in an increase in lattice constants and enhanced lattice distortion. The doping of Ca[Formula: see text] introduces impurity energy levels, making it possible for some low-energy electron transitions, achieving an enhancement in infrared absorption and emission capabilities. When the Ca[Formula: see text] doping concentration reaches 7.5% mol, the average infrared emissivity in the 3–5[Formula: see text][Formula: see text]m and 8–12[Formula: see text][Formula: see text]m ranges are 0.85 and 0.92, respectively, representing a 19.7% and 21% increase compared to DyTa3O9. This novel high-infrared-emissivity ceramic holds great potential for applications in high-temperature energy conservation and aerospace thermal protection.","PeriodicalId":503716,"journal":{"name":"Modern Physics Letters B","volume":"121 51","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-05-18","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"141125096","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Impact of the Stefan gusting on a bioconvective nanofluid with the various slips over a rotating disc and a substance-responsive species","authors":"K. Gangadhar, M. Rao, M. A. Kumari, A. Wakif","doi":"10.1142/s0217984924504062","DOIUrl":"https://doi.org/10.1142/s0217984924504062","url":null,"abstract":"This paper presents thorough computational and theoretical analyses of steady forced convective flow over a rotating disc submerged in a water-based nanofluid containing microorganisms. It delves into the examination of boundary layer flow characteristics of a viscous nanofluid, considering Stefan blowing effects and multiple slip conditions influenced by a magnetic field. Notably, the study accounts for novel aspects such as thermal radiation and both constructive and destructive chemical reactions. The movement of nanoparticles is elucidated based on thermophoresis and microscopic behaviors, while changes in volume fraction do not affect the thermo-physical properties of the nanofluid. To address the altered nonlinear set of differential equations, an effective numerical approach, the Keller-Box method, is implemented for critical and efficient solutions. These appropriate transformations are defined and applied. When compared to blowing suction, it shows a better enhancement in the rate of heat transfer, mass, and microorganisms. Some of the main observations are there is a decrease in wall skin friction in the directions of radial and tangential as magnetic field strength is increased. The evaluation of thermal boundary layer thickness and temperature is noted for the radiation parameter (Rd) improvement. The present analysis has applications in electromagnetic micro-pumps and nanomechanics. As to the applications in the science and engineering fields, technologies such as micro-electromechanical systems-based microfluidic devices and microfluidic-related technologies will be accepted.","PeriodicalId":503716,"journal":{"name":"Modern Physics Letters B","volume":"105 10","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-05-18","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"141124947","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}