{"title":"Estimation the Remaining Life for Reformer Unit Tubes Furnace Operated Beyond the Design Life","authors":"Husam Ahmed Al-Warmizyari","doi":"10.52716/jprs.v13i3.708","DOIUrl":"https://doi.org/10.52716/jprs.v13i3.708","url":null,"abstract":"The aim of this work is to study and model creep damage accumulation for remaining safe working life estimation of tube material used in petroleum industry plants operated at a high temperature for long time beyond the design life. Material constants and other data required for life estimation were extracted from the output results of real accelerated creep rupture tests conducted at three test temperatures (700, 725, and 750(oC and at three constant stress applications (120, 130, and 140 MPa). Also, a time-temperature parameter method (Larson-Miller Method) was modified to be applied based on the results of the accelerated creep rupture tests to build life predicted master curve for austenitic stainless steel type 321H. It is found that creep rupture time for stainless steel alloy decreases as temperature or stress increase. Also, it distinguished from the creep curves for the serviced stainless steel alloy, that the onset of tertiary creep stage starts early (about 50% of creep curve), this reflects the reduction in creep strength of the alloy as a result of the degradation in alloy properties that take place during the service life. It is also found that the estimated remaining working life for the serviced tube samples made from austenitic stainless steel type 321H is about (54703 hr) based on the calculated stress level (40 MPa) and service temperature 570 oC. The difference between the estimated remaining life and the experimental creep test life is due to the differences between the applied stresses, where higher level of stresses in the experimental creep testes are used to accelerate failure of specimens. The application for the result of this work can be the petroleum industries that where heaters tubes serviced at such industry need to be estimated for the remaining life after the design life expire.","PeriodicalId":494255,"journal":{"name":"مجلة البحوث و الدراسات النفطية","volume":"42 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2023-09-10","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"136071189","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Huda F. Alsaad, Safa J. Al-Kamil, Mohammed S. Al-Radhi, Najm A. Fadhih
{"title":"Neural Network for Porosity Prediction in Carbonate Formation: A Case Study of the South of Iraq","authors":"Huda F. Alsaad, Safa J. Al-Kamil, Mohammed S. Al-Radhi, Najm A. Fadhih","doi":"10.52716/jprs.v13i3.697","DOIUrl":"https://doi.org/10.52716/jprs.v13i3.697","url":null,"abstract":"This study presents the application of a Sequence-to-Sequence (Seq2Seq) recurrent neural network for estimating porosity log data by leveraging information from other logs. The effectiveness of this technique in simulating porosity for heterogeneous reservoirs is demonstrated by employing data from the Yamama Formation in the Faihaa Oil field in southern Iraq. Four wells in the field were used for the model training and evaluation, where input data comprised density, neutron, gamma-ray, and porosity logs. The model's performance was assessed using absolute percentage, and root means squared errors, and the results were compared against actual data, revealing a significant correlation. These results establish the Seq2Seq recurrent neural network model as a superior option for predicting reservoir porosity from other good log data. They could have practical implications in estimating porosity for petroleum calculations. .","PeriodicalId":494255,"journal":{"name":"مجلة البحوث و الدراسات النفطية","volume":"35 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2023-09-10","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"136072142","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Abdulla M. Ahmed, Aysar T. Jarullah, Hala M. Hussein, A. N. Ahmed
{"title":"Mordenite-Type Zeolite from Iraq Sand: Synthesis and Characterization","authors":"Abdulla M. Ahmed, Aysar T. Jarullah, Hala M. Hussein, A. N. Ahmed","doi":"10.52716/jprs.v13i3.709","DOIUrl":"https://doi.org/10.52716/jprs.v13i3.709","url":null,"abstract":"Mordenite's excellent physical and chemical qualities set it apart from other zeolites with similar applications in industry. Mordenite is frequently produced through hydrothermal processing with TEA+ cations. The best template agent is TEA+ cations, despite the fact that they may lead to a variety of problems, such as the release of toxicity, the high cost of production, the contamination of wastewater, and environmental damage. So, it's important to develop a mordenite synthesis technique that doesn't need an organic template or a cheap template. The mordenite-type zeolites were prepared using sand from the western part of Iraq (Ar-Rutbah). Silica was extracted from Iraqi sand as a silica source and sodium aluminate as a source of alumina Al by using the SOL-GEL method through the hydrothermal technique at temperatures ranging from 23 to 27 °C over a period of 7 days. Analyses such as XRD, BET surface area AFM, FT-IR, and FE-SEM were performed on the sample. The average particle size was 31.9 nm, and the BET surface area was 202.487. XRF detected the ratio of silica to alumina (Si/Al = 4.55), and the exchange of sodium ions for hydrogen ions through ionic exchange is 100%. The micrograph clearly reveals a tiny portion of the crystal band with a flaky habit, while FE-SEM images of synthesized H-MOR show that plates form the majority of the crystals.","PeriodicalId":494255,"journal":{"name":"مجلة البحوث و الدراسات النفطية","volume":"137 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2023-03-10","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"136155861","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}