{"title":"Effects of Traffic Control Lights on the Flow in Urban Areas","authors":"Mahmoud E. El-Shourbagy, Magdy A. Zahw","doi":"10.21608/njace.2024.341288","DOIUrl":"https://doi.org/10.21608/njace.2024.341288","url":null,"abstract":"Traffic signals are considered to be the best solution for traffic control at large intersections and crossings right-turning of which a large amount of traffic has to come across several conflict points and hence there is a possibility of accidents. In the development of urbanization, a traffic motorization and traffic controlling by signal lights must not be dispensed with. This paper describes the effect of traffic control lights on the traffic flow such as active, passive, cost, and environmental effects. It is an important requirement to adopt such a traffic control requiring the least of sacrifices both from the part of traffic and persons partaking in urban traffic. In general, several constant time programs can be practically applied. However, traffic light can only be operated with one or two programs.","PeriodicalId":481493,"journal":{"name":"Nile Journal of Architecture and Civil Engineering","volume":"6 3","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-01-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"140523115","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Prediction of Mix Proportioning of High-Performance Concrete using Harmony Search Algorithms","authors":"Dina E. Tobbala","doi":"10.21608/njace.2024.341290","DOIUrl":"https://doi.org/10.21608/njace.2024.341290","url":null,"abstract":"High-performance concrete is defined as concrete that meets special combinations of performance and uniformity requirements that cannot always be achieved routinely using conventional constituents and normal mixing, placing, and curing practices. A large number of trial mixes are required to select the desired combination of materials that meets special performance. Therefore, in this paper, using Harmony Search (HS) meta-heuristic algorithms optimization method imitating the music improvisation process where musicians improvise their instruments’ pitches searching for a perfect state of harmony. There are three type of Harmony search (Local (LHS), Improved (IHS) and Global (GHS) which were successfully used in different branches of engineering. So, these algorithms are used to predict the quantity of contents of the mixes at different known compressive strength and slump. The results of this research show that, Harmony Search Algorithms is an effective method in prediction of concrete mixes, while comparing the results of the three types of Harmony Search algorithms, it was be found that GHS results is better than IHS better than LHS whither according to min. cost or min. average error.","PeriodicalId":481493,"journal":{"name":"Nile Journal of Architecture and Civil Engineering","volume":"41 16","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-01-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"140518048","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"The Role of Modern Technologies in Reducing Heat and Sustainability Through the Building Envelope","authors":"Amira Mersal","doi":"10.21608/njace.2024.341291","DOIUrl":"https://doi.org/10.21608/njace.2024.341291","url":null,"abstract":"Smart technologies have greatly affected buildings, so buildings have a distinctive identity that derives from the presence of kinetic systems that have an effect on reducing heat. Where the use of smart technologies and remote sensing systems in buildings helped to achieve the highest levels of control in the various standards that help preserve the external and internal environment, Technologies help achieve resource sustainability and reduce costs. Therefore, smart technologies have become intertwined with the concepts of sustainability. And it has an impact on the main aspects of the building such as function, construction and form, as the external envelope is considered one of the most important aspects affected by the sustainable building, Especially if the shape is linked to smart technologies in the building’s outer shell in hot areas. The research aims to determine the extent of the impact of technology on the outer shell, the moving elements in the facades, and their role in sustainability. And to protect it from climate changes and solar radiation to provide comfort to its users in hot areas. To achieve the goal of the research, a methodology was developed in the research that begins with introducing the concept of intelligence and the outer shell, and previous studies, and then analyzing the examples. One of the most important findings of the research is that the use of technology in architecture It provides convenience to users and helps with sustainability.","PeriodicalId":481493,"journal":{"name":"Nile Journal of Architecture and Civil Engineering","volume":"17 5","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-01-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"140521032","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Flash Floods Mitigation and Harvesting","authors":"Mohamed Tarek Shamaa","doi":"10.21608/njace.2024.341289","DOIUrl":"https://doi.org/10.21608/njace.2024.341289","url":null,"abstract":"Flash floods are dangerous and destructive weather disasters, mostly in arid and semiarid zones. They usually happened quickly in mountain areas exposed to heavy thunderstorms, but dam or levee break can also lead to flash floods. Flash floods frequently cause landslip which have damaging outcomes on constructions and highways, property, and may leads to deaths. Water shortage in Egypt has certainly become a serious problem. Water uses in Egypt have exceeded accessible water resources because of fast population growth. Ethiopian Renaissance Dam also may lessen Egypt's quota of Nile water. So, Egypt should use novel sources of water, one of which is flash floods water. Flash floods are dangerous, but they present major source to refill aquifers and can become useful by retaining flood water using dams or any suitable water harvesting system. Flood mitigation is classified to structural and nonstructural choices. Structural procedures as dams, levees, and floodwalls, retarding basins, spur dikes, and etc. alter the features of flood and decrease probable of flood in locations of interest. While nonstructural measures alter the influence flood and have minor influence on flood features. Integral information gotten from remote sensing with other datasets in spatial and non-spatial formats provides enormous possibility to monitor and estimate flood. Level of flood mitigation should be suitable using economic analysis of expenses for rising structure level to the desired heights and direct and indirect revenues achieved by flood mitigation level. A lot of wadi areas in Sinai Peninsula, Eastern desert, Western desert, and South Egypt are prone to flash flood. Studies for flash floods in some Wadi in Egypt are mentioned briefly in this article.","PeriodicalId":481493,"journal":{"name":"Nile Journal of Architecture and Civil Engineering","volume":"34 19","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-01-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"140518116","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Experimental Study to Compare Thermal Properties of Bricks Made from Construction and Demolition Waste with Clay and Cement bricks","authors":"Hesham Hassan, Eman Mohamed","doi":"10.21608/njace.2024.341292","DOIUrl":"https://doi.org/10.21608/njace.2024.341292","url":null,"abstract":": The author conducted an experimental study for determining the thermal characteristics of bricks, which fabricated from the building construction and demolition waste. The brick units contain air spaces to increase the possibility of thermal insulation of walls. Such units are used as an alternative to red brick or cemented brick. The results indicated that the manufactured units achieved highly successful of mechanical and physical properties. However, that indicator cannot be introduced as an only indication of the possibility of replacing red and concrete bricks by these manufactured units in the store. However, environmental and economic feasibility of these manufactured units must be studied. Therefore, this study investigates and identify the characteristics of the conductivity and thermal insulation of the manufactured units. In addition to the mechanical properties, the results of thermal properties are used for assessing the environmental performance of the manufactured units compared with thermal insulation properties of red and cemented bricks. The significance of research linking a bunch of different sciences in architecture, science of material properties, heat transfer and environmental studies. In the framework of a systematic system works to achieve sustainability principles to reap the potential benefits of the application of one of the most important sustainability principles and techniques which is Recycling. This leads to the creation of a new concept of the architect's message beyond urban or architectural design that meets the needs of an individual or a body or institution to meet the requirements of the environment not only by shape and function, but also by a full curriculum that respects the environment and achieve sustainability principles.","PeriodicalId":481493,"journal":{"name":"Nile Journal of Architecture and Civil Engineering","volume":"43 8","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-01-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"140527258","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Maher T. EL-Nemr, Waseim R. Azzam, Ehab K. Gaber, Omar Ashour
{"title":"Numerical Investigation of the Behavior of Group-Finned Piles in Sandy Soil Subjected to Tensile Loads","authors":"Maher T. EL-Nemr, Waseim R. Azzam, Ehab K. Gaber, Omar Ashour","doi":"10.21608/njace.2024.341286","DOIUrl":"https://doi.org/10.21608/njace.2024.341286","url":null,"abstract":"Numerous towering structures such as dock-fendering systems, abutments, marine dolphins, transmission towers, and high-rise platforms, which experience substantial uplift loads, rely on deep foundations for support. In this research, we have introduced an innovative pile modification technique aimed at enhancing traditional piles, known as the \"finned pile.\" This modification involves the addition of four fins, welded around the lower circumference of the pile, to augment its tensile capacity. Numerical simulations were conducted to subject various pile groups and spacing configurations to axial static tension loading. Throughout all test scenarios, consistent parameters such as fin width, fin length, number of fins, embedment depth, and pile diameter were maintained to assess the effectiveness of this pile modification strategy. The analysis utilized the PLAXIS 3D Foundation as its numerical modeling program. The findings demonstrated a noteworthy enhancement in the uplift capacities of pile groups with fins when compared to traditional piles without fins. For finned pile groups featuring different L/d ratios of 10, 20, and 26, the respective capacities reached 450 Kg. Conversely, the normalized displacement ratio exhibited an uptick with higher L/d ratios, measuring 0.4, 0.9, and 4.4, respectively. Consequently, there was a marginal performance improvement in finned pile groups with increasing ratios. Moreover, the performance of the pile groups saw a significant enhancement as the soil Dr (Relative Density) increased. For varying W f (Finned Pile Width), the ultimate load of finned pile groups showed a slight rise with increasing W f while keeping the fin length constant. In contrast to single fin piles, W f exhibited an increase as the ultimate load rose.","PeriodicalId":481493,"journal":{"name":"Nile Journal of Architecture and Civil Engineering","volume":"55 8","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-01-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"140519569","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Towards Enhanced Interior and Exterior Design of Children Hospitals in Egypt","authors":"Aya El-sayed, Sherein El-Shahat","doi":"10.21608/njace.2023.322397","DOIUrl":"https://doi.org/10.21608/njace.2023.322397","url":null,"abstract":"The psychological and biological aspects that accompanied to the child development in his different age stages are mainly related to his spatial dimensions. This relationship could be translated to his architectural existence. Various sciences about the upbringing and growth of the child have developed, while architecture in that field has not been able to keep pace with this rapid development. Until now, when people look closely outside the buildings that have been created for young children, they just find a form and content of an ordinary architecture. It is differing from child architecture that should be sourcing from the Children world and becoming a part of him, while he explores the world and shapes himself. The problem facing children's hospitals in Egypt needs to an urgent improvement of their interior designs to be suitable for the personality and tendencies of the child and his perception. This greatly enhances the positive role of interior design, which reflects on raising the morale of the child, achieving comfort and stability during his treatment period, and increasing the chances of recovery and improvement. There is still a chance to reach the level of interior design in children's hospitals that is compatible with the human and psychological needs of the child. If the interior design of children's hospitals developed by the psychological and physical needs of the child, it will speed up its recovery and give him the feeling that he cures in a recreational center more than a health center.","PeriodicalId":481493,"journal":{"name":"Nile Journal of Architecture and Civil Engineering","volume":"7 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2023-06-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"135194706","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Integration of Design Elements in Exhibition and Conference Centers in Egypt","authors":"Salma Hesham, Sherein El-Shahat","doi":"10.21608/njace.2023.322396","DOIUrl":"https://doi.org/10.21608/njace.2023.322396","url":null,"abstract":"As the world grapples with environmental challenges, expos must take a proactive stance in minimizing their ecological footprint. The paper will emphasize the pressing need for sustainability in expo design. By prioritizing eco-friendly materials, energy-efficient technologies, and waste reduction strategies, expos can serve as sustainable models that inspire long-lasting change and environmentally conscious practices. Through an in-depth exploration of technology integration, spatial re-imagination, and sustainability, this research aims to provide insights and recommendations that can revolutionize the design of expos. By embracing these enhancements, expo organizers and participants can unlock new realms of creativity, engagement, and impact, ensuring that these global showcases remain at the forefront of innovation and inspiration.","PeriodicalId":481493,"journal":{"name":"Nile Journal of Architecture and Civil Engineering","volume":"86 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2023-06-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"135194690","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Strengthening of Concrete Specimens with Glass Fiber Reinforced Polymer Sheets","authors":"Dina E. Tobbala, et. al.","doi":"10.21608/njace.2023.322399","DOIUrl":"https://doi.org/10.21608/njace.2023.322399","url":null,"abstract":"This study details the specimens, material qualities, testing setup, instruments, and technique. The experimental programme featured five cylinders, four cubes, and ten PC beams. The cylinder specimen had 200 mm sides and 100 mm diameter. The 100*100*100 - mm cube specimen had length sides. Beam specimens were 500 mm long and 100*100 mm wide. The specimens were loaded to failure under increasing static stresses. Cylinder, cube, and beam specimens were examined for compressive and flexural strength, respectively. The compressive and bending strength testing followed ECP 203 - 2018, the Egyptian Code for Design and Construction of Reinforced Concrete Structures. Two specimens of each type were control specimens. Externally Bonded (EB) Fibreglass Sheets with varied strip widths reinforced the other sample. ECP 208 - 2005, the Egyptian Code of Practise for the Use of Fibre Reinforced Polymer (FRP) in Construction, guided the strengthening process. Faculty of Engineering, Nile Higher Institute, Mansoura city, conducted all experiments in the Material Lab. The results show that the researched strengthening methods can improve the compressive and flexural behaviour of concrete specimens with GFRP sheets and increase load capacity compared to the control specimens.","PeriodicalId":481493,"journal":{"name":"Nile Journal of Architecture and Civil Engineering","volume":"23 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2023-06-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"135194658","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}