{"title":"Experimental Investigation and Thermodynamic Modeling of Zn+2 and Ni+2 Extraction from Zn Plant Residue using D2EHPA","authors":"M. Mohammadzadeh, H. Bagheri, S. Ghader","doi":"10.5829/ije.2023.36.11b.07","DOIUrl":"https://doi.org/10.5829/ije.2023.36.11b.07","url":null,"abstract":"Zinc plant filter cake contains valuable metals that can be reused as a source for obtaining these metals. This study describes an experimental two stage study on the extraction of zinc and nickel from waste zinc filter cake which includes acid leaching of zinc filter cake followed by organic phase aided extraction of metals from the leaching solution. To determine the optimum leaching condition a comprehensive study of the recovery of chemical elements from spent plant residues was experimentally studied at different levels of acid concentrations at different temperatures while measuring chemical elements concentration with respect to time. Experimental results showed that 99% recovery of Ni2+, Zn2+ and 89% recovery of Pb2+ can be achieved at following optimum conditions: 2M nitric acid, T= 358.15 K after 1.5 h of acid leaching at S/L=1/10. Then, the extraction of Zn2+, Ni2+, and Pb2+ was carried out by di-(2-ethylhexyl) phosphoric acid (D2EHPA) that was diluted with kerosene in equal phase ratio and the effect of extractant concentration and pH was studied at T = 298.15 K. Results showed that an increase in pH and extractant concentration can greatly increase zinc and nickel extraction to a maximum achievable amount of 95% and 90 % for Zn2+ and Ni2+, respectively by 25 (v/v%) D2EHPA at pH = 5.5 and organic to aqueous phase ratio (O/A) = 1/1. For modeling of equilibrium concentrations in organic and aqueous phases and activity coefficients calculation, Electrolyte-UNIQUAC-NRF, UNIQUAC-NRF, NRTL and NRTL-based local composition models were used. After that, adjusted parameters were successfully used for calculation of the equilibrium constant of the unknown parameters and the extraction reaction. The obtained results of thermodynamic modeling were in well agreement with the experimental data.","PeriodicalId":476287,"journal":{"name":"International journal of engineering. Transactions B: Applications","volume":"7 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2023-01-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"135440070","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"A Multiple Kernel Learning based Model with Clustered Features for Cancer Stage Detection using Gene Datasets","authors":"A. Mohammadjani, F. Zamani","doi":"10.5829/ije.2023.36.11b.08","DOIUrl":"https://doi.org/10.5829/ije.2023.36.11b.08","url":null,"abstract":"The","PeriodicalId":476287,"journal":{"name":"International journal of engineering. Transactions B: Applications","volume":"115 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2023-01-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"135441423","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Novel Scheme for Data Hiding in Binary Images using Cover Pattern Histogram","authors":"G. Chhajed, B. Garg","doi":"10.5829/ije.2023.36.11b.16","DOIUrl":"https://doi.org/10.5829/ije.2023.36.11b.16","url":null,"abstract":"In today's digital age, security and safe communication are necessities. Applications frequently transport large amounts of private data as binary images. This research proposes a unique scheme that uses a cover pattern histogram-based decision tree for information concealment and extraction from binary images. This research aims to provide a data-hiding approach with a large capacity for data concealment, possible minor distortion, security, and difficulty discovering hidden data. This method uses high-frequency 3X3 pixel block patterns to obscure data. The two series of pattern's are identified based on sorted block pattern frequency. To construct a decision tree for embedding, these series patterns, key bits, and information bits work together as parameters. Information is encrypted using a secret key to ensure message security before being hidden. A decision tree decides the block suitability and bit embedding with or without flipping at the sender side. A histogram of 3X3 pixel block patterns gets generated for the received image containing concealed data, and two series are recognized similarly to the embedding procedure at the receiver side. A decision tree assesses whether an image block carries an information bit and decides whether the bit is \"0\" or \"1\". This decision tree extracts hidden data bits by analyzing series patterns and key bits. The secret key decodes retrieved concealed bits and reveal the original data. According to research, 50-80 % of hidden bits are transmitted without flipping the pixels, automatically reducing visual distortion. This scheme performs better than comparable methods and is applicable in steganography and watermarking.","PeriodicalId":476287,"journal":{"name":"International journal of engineering. Transactions B: Applications","volume":"19 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2023-01-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"135495928","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
A. Torkaman, K. Badie, A. Salajegheh, M. H. Bokaei, S. F. Fatemi Ardestani
{"title":"A Hybrid Approach to Detect Researchers’ Communities Based on Deep Learning and Game Theory","authors":"A. Torkaman, K. Badie, A. Salajegheh, M. H. Bokaei, S. F. Fatemi Ardestani","doi":"10.5829/ije.2023.36.11b.10","DOIUrl":"https://doi.org/10.5829/ije.2023.36.11b.10","url":null,"abstract":"Today, with the proliferation of complex networks and their large amounts of data, researchers have great concerns about the accurate community detection methods. The difficulty in analyzing these networks stems from their enormous size and the complex relationships among the members of the networks. It is difficult to analyze the deep relationships and mechanisms by just looking at the whole. Traditional methods have some problems and limitations when analyzing these networks such as feature extraction, high reliance on the initial phase settings, computational complexity, neglect of network relationships and content. From the perspective of relationships and interactions between individuals, the environment of complex networks can be compared to a game in which nodes acting as players or agents may join or leave a community based on similar structural or semantic characteristics. Consequently, there is a strong tendency to use cooperative and non-cooperative games to detect communities. Moreover, the amalgamation of deep learning techniques and game theory has recently been proven to be highly effective in extracting communities. Deep learning techniques have demonstrated enhanced capability in feature engineering and automate the process. In this study, the authors make effort to detect rational and accurate communities based on structural and content features with the help of traditional approaches, deep learning, as well as cooperative and non-cooperative games. The efficiency of this study is demonstrated by experimental findings on real datasets, and confirming that it is able enough to identify those communities that are more meaningful.","PeriodicalId":476287,"journal":{"name":"International journal of engineering. Transactions B: Applications","volume":"89 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2023-01-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"135440587","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
P. Jalili, M. D. Afifi, B. Jalili, A. M. Mirzaei, D. D. Ganji
{"title":"Numerical Study and Comparison of Two-dimensional Ferrofluid Flow in Semi-porous Channel under Magnetic Field","authors":"P. Jalili, M. D. Afifi, B. Jalili, A. M. Mirzaei, D. D. Ganji","doi":"10.5829/ije.2023.36.11b.13","DOIUrl":"https://doi.org/10.5829/ije.2023.36.11b.13","url":null,"abstract":"In this article, the equations governing the constant ferromagnetic current are investigated. The Lorentz force restrains this ferrofluid flow in a semi-porous valve. Analyzes were performed on three sub-particle fluids: kerosene and blood, water and magnetite. Modeling in the Cartesian coordinate system using the relevant equations was investigated. A slight thinning should be considered in the lower part of this channel. This research has used two Akbari-Ganji methods (AGM) and finite element method (FEM) to solve the equations. Nonlinear differential equations are solved using the above two methods. In the finite element model, the effect of changing the Hartmann number and the Reynolds number on the flow velocity and the derivatives of the velocity and shear stress of the fluid were investigated. As the Hartmann number increases, the velocity decreases in both directions. The Reynolds number changes in different slip parameters, which shows the opposite behavior for the two directions. Also, the insignificant effect of volume fraction of nanoparticles on velocity and its derivatives and shear stress was investigated. The results of solving the equations with the above two methods were compared with HAM. The results obtained using AGM and FEM and their comparison with previous researches have led to complete agreement, which shows the efficiency of the techniques used in this research.","PeriodicalId":476287,"journal":{"name":"International journal of engineering. Transactions B: Applications","volume":"22 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2023-01-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"135495930","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
N. Nurbaiti, A. E. Tontowi, M. G. Widyastuti, H. V. Hoten, F. Ibrahim, N. Muna, R. Febrian, D. P. Perkasa, M. K. Herliansyah
{"title":"Process Parameter Optimization of 3D-Printer Machine Using Response Surface Method for Printing Hydroxyapatite/Collagen Composite Slurry","authors":"N. Nurbaiti, A. E. Tontowi, M. G. Widyastuti, H. V. Hoten, F. Ibrahim, N. Muna, R. Febrian, D. P. Perkasa, M. K. Herliansyah","doi":"10.5829/ije.2023.36.11b.02","DOIUrl":"https://doi.org/10.5829/ije.2023.36.11b.02","url":null,"abstract":"Nowadays, various 3D-Printer technologies are commercially available. However, those printers could only be used for a certain material provided by the printer manufacturers. For new material, the commercial printer could not be employed directly and needs to be modified and its printing parameter has to be optimized to fit the property of the new material. This paper aimed to find the optimum parameters (print speed and layer height) based on printability material. The new material that would be developed was a composite of bioceramic powder (hydroxyapatite) and polymer (collagen) in the form of slurry with ratios of 99.84% (w/v) and 0.16% (w/v). While the printer was a commercial 3D-Printer machine with modification on its cartridge container and bracket. The printing parameters were layer height (0.65, 1.0, 1.35 mm) and print speed (14.4, 25, 35.6 mm/min). Optimization of the printing parameter used Response Surface Method (RSM) with 13 sets of specimens. Test specimens for defining printable material were printed in the form of line shape and a rectangular shape for case study. Printability as a responding of the optimum parameter setting was defined on the basis of 5%-maximum dimension error of the printed specimen compared to the 3D-CAD data. Data obtained was analyzed using ANOVA. The results show that the optimum setup printing parameter were 10.009 mm/min for print speed and 0.505 mm for layer height, respectively with the error dimension obtained from the experiment was 0.013 mm2 (0.59%) lower than that of the permitted error of 5% (0.125 mm2).","PeriodicalId":476287,"journal":{"name":"International journal of engineering. Transactions B: Applications","volume":"14 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2023-01-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"135440065","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Exploring Factors Influencing Cryptocurrency Adoption: A Comprehensive Modeling Based on Fuzzy Cognitive Maps Approach","authors":"S. Mohammadi, M. Yadegari","doi":"10.5829/ije.2023.36.11b.12","DOIUrl":"https://doi.org/10.5829/ije.2023.36.11b.12","url":null,"abstract":"Cryptocurrencies, with their decentralized nature, are gaining rapid international adoption as a means of payment or a valuable digital asset, independent of the economic policies of governments and without the need for a supervisory institutions such as banks. However, limited research has been conducted on the adoption of cryptocurrencies, most of which employ a general technology acceptance/ adoption model with a positivist approach. The main problem with previous studies is that they have been limited to the structure of general adoption models and only examined a few constructs due to the increasing complexity of the model. On the other hand, due to cryptocurrencies' unique nature and rapid developments, it is necessary to create new comprehensive models that include different dimensions. This paper aims to identify influential factors in the adoption of cryptocurrency technology, understand their interrelationships, and ultimately develop a comprehensive model. With a constructivist approach, this study uses the most important research of the past decade in the field of cryptocurrency adoption and creates a cognitive model of their constructs through a systematic approach. The focal point of our approach is constructivism, accompanied by considering the impact of constructs on each other using fuzzy cognitive maps, which has not been previously done in cryptocurrency adoption. The results of the proposed model indicate that perceived usefulness, attitude, financial value, and perceived ease of use are the most significant constructs that influence the creation of positive intention toward the use and adoption of cryptocurrencies.","PeriodicalId":476287,"journal":{"name":"International journal of engineering. Transactions B: Applications","volume":"144 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2023-01-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"135441130","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Development of Light Dynamic Penetrometer for Application in Dense Soil","authors":"A. Nasirifar, M. Khodaparast","doi":"10.5829/ije.2023.36.11b.04","DOIUrl":"https://doi.org/10.5829/ije.2023.36.11b.04","url":null,"abstract":"The dynamic probing test is effective for compaction control in road embankments and pavement layers. However, challenges exist to its use in dense soil types to obtain valid results. The main purpose of this research is to use light weight penetrometer in dense soils and obtain valid results. This study developed and tested three light dynamic penetrometers with different cone geometries in dense soils and compared their results with those of conventional dynamic penetrometers. Over 72 dynamic penetration tests were performed in the field in dense natural soil. The results showed a 50% reduction in the number of blows compared to the dynamic probing light penetrometer (DPL). The coefficients of variation of the results of 8.6% to 15.9% indicate desirable repeatability. To further evaluate the efficiency of these penetrometers, the correlations between their results and the soil characteristics of the dry unit weight in place, compaction percentage and peak shear strength were assessed by statistical residual analysis. This approach showed that these relationships were satisfactory.","PeriodicalId":476287,"journal":{"name":"International journal of engineering. Transactions B: Applications","volume":"142 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2023-01-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"135440068","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"A Numerical Study to Investigate Shear Behavior of High-strength Concrete Beams Externally Retrofitted with Carbon Fiber Reinforced Polymer Sheets","authors":"A. M. Jabbar, D. H. Mohammed, Q. A. Hasan","doi":"10.5829/ije.2023.36.11b.15","DOIUrl":"https://doi.org/10.5829/ije.2023.36.11b.15","url":null,"abstract":"This paper aims to numerically investigate the structural behavior of reinforced high-strength concrete (HSC) beams retrofitted by Carbon Fiber Reinforced Polymer (CFRP) sheets after cracking. Six pre-cracked HSC beams retrofitted with CFRP sheets having identical reinforcement are numerically tested by four-point loading until failure using Abaqus software, besides two others without CFRP as control beams. CFRP sheets are attached on three beam sides in the shear span after cracking under 60 % of loading. Two shear span distances, two inclinations of CFRP sheets, and the number of sheets are adopted as parameters to compare with the experimental results obtained previously. Test results are matched with the practical findings to calibrate the Abaqus parameters. The results show that retrofitting the cracked beam by CFRP raised its tolerance to the applied load by a range of (13-36) % depending on the shear span to depth ratio and the arrangement of CFRP sheets. When the beam tends to fail in shear, the effect of CFRP is more pronounced than when it tends to fracture in flexure. The inclined sheets are more effective than the vertical ones. Furthermore, two additional parameters are regarded to clarify their effects on the behavior of retrofitted beams: sheet width and concrete compressive strength. Altering the CFRP width does not affect the tolerance, whereas increasing concrete compressive strength raises the beam loading.","PeriodicalId":476287,"journal":{"name":"International journal of engineering. Transactions B: Applications","volume":"29 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2023-01-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"135495923","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Y. Yusmaniar, E. Julio, A. Rahman, S. D. Yudanto, F. B. Susetyo
{"title":"Synthesis of Polyvinyl Alcohol-Chitosan Composite Film using Nanocellulose from Coconut Fibers (Cocos nucifera)","authors":"Y. Yusmaniar, E. Julio, A. Rahman, S. D. Yudanto, F. B. Susetyo","doi":"10.5829/ije.2023.36.11b.05","DOIUrl":"https://doi.org/10.5829/ije.2023.36.11b.05","url":null,"abstract":"In this research, polyvinyl alcohol (PVA)-chitosan composite films were produced using nanocellulose from coconut fibers (Cocos nucifera) in an Indonesian plantation in order to enhance mechanical properties and biodegradability. The process began by separating lignin and hemicellulose by delignification, bleaching, and then cellulose hydrolysis to produce nanocellulose. The PVA was mixed with chitosan with specific compositions and added the nanocellulose in 0%, 1%, 3%, and 5% concentrations, respectively. A tensile test was conducted to obtain tensile strength and elongation break. Biodegradability test was also carried out to determine the level of mass losses. Based on SEM observations, addition of nanocellulose appears to increase the reactivity of the formation of PVA-chitosan composite films, which are characterized by a reduction in film thickness. Addition of 5% nanocellulose resulted in a high quality of nano-composite. The tensile strength, fracture elongation and biodegradability of the composite film were 31.50 MPa, 39.9% and 9.04%, respectively.","PeriodicalId":476287,"journal":{"name":"International journal of engineering. Transactions B: Applications","volume":"5 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2023-01-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"135441124","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}