Journal of Engineering Design and Technology最新文献

{"title":"Conceptual design of a small production plant for eco-friendly packaging","authors":"Lorenzo Fiorineschi, L. Conti, G. Rossi, F. Rotini","doi":"10.1108/jedt-02-2022-0118","DOIUrl":"https://doi.org/10.1108/jedt-02-2022-0118","url":null,"abstract":"\u0000Purpose\u0000This paper aims to present the application of a tailored systematic engineering design procedure to the concept design of a small production plant for compostable packaging made by straw fibres and bioplastic. In particular, the obtained boxes are intended to be used for wine bottles.\u0000\u0000\u0000Design/methodology/approach\u0000A systematic procedure has been adopted, which underpins on a comprehensive analysis of the design requirements and the function modelling of the process. By considering well-known models of the engineering design process, the work focuses on the early design stages that precede the embodiment design of the whole components of the plant.\u0000\u0000\u0000Findings\u0000The followed design approach allowed to preliminarily evaluate different alternatives of the process from a functional point of view, thus allowing to identify the preferred conceptual process solution. Based on the identified functional sequence, a first evaluation of the potential productivity and the required human resources has been performed.\u0000\u0000\u0000Research limitations/implications\u0000The procedure shown in this work has been applied only for the considered case of compostable packaging, and other applications are needed to optimize it. Nevertheless, the adopted systematic approach can be adapted for any context where it is necessary to conceive a new production plant for artefacts made by innovative materials.\u0000\u0000\u0000Originality/value\u0000The work presented in this paper represents one of the few practical examples available in the literature where systematic conceptual design procedures are presented. More specifically, to the best of the authors’ knowledge, this is the very first application of systematic design methods to compostable packaging production.\u0000","PeriodicalId":46533,"journal":{"name":"Journal of Engineering Design and Technology","volume":null,"pages":null},"PeriodicalIF":2.8,"publicationDate":"2022-07-21","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"43313292","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"A framework for enhancing building maintainability through facilitating early suppliers’ involvement in the design process","authors":"A. Othman, A. Kamal","doi":"10.1108/jedt-02-2022-0090","DOIUrl":"https://doi.org/10.1108/jedt-02-2022-0090","url":null,"abstract":"\u0000Purpose\u0000The aim of this paper is to develop a framework to enhance building maintainability through facilitating early suppliers’ involvement (ESI) in the design process.\u0000\u0000\u0000Design/methodology/approach\u0000A research methodology consisting of literature review, case studies and survey questionnaire was designed to achieve the above-mentioned aim. Firstly, literature review was used to examine the concepts of building maintenance, maintainability, the design process and ESI. Secondly, three case studies were presented and analysed to investigate the role of ESI towards enhancing building maintainability during the design process. Thirdly, a survey questionnaire was carried out with a representative sample of architectural design firms (ADFs) in Egypt to investigate their perception and application of ESI towards enhancing building maintainability during the design process. Finally, the research developed a framework to facilitate ESI in the design process in ADFs in Egypt.\u0000\u0000\u0000Findings\u0000Through literature review, the research highlighted the relationship between ESI and enhancing building maintainability and identified the roles, benefits, challenges and that encounter ESI in ADFs, factors for suppliers selection and levels of involvement. Results of the data analysis showed that “Difficulty of trusting external parties and sharing information with transparency” was ranked the highest challenge of ESI in ADFs in Egypt, followed by “Legal competitive advantage restrictions”. Moreover, “Better estimation for operation and maintenance costs” was ranked the highest contributions of ESI towards enhancing building maintainability, followed by “Reduce the number of operation and maintenance problems or reworks”. Finally, respondents stated that “Innovation, technical expertise, and competence” was ranked the highest supplier’s selection criteria, while “paying consultation fees for offering advice and recommendations to the design team” was ranked the highest form of supplier’s remuneration.\u0000\u0000\u0000Research limitations/implications\u0000The proposed framework contributes to the body of knowledge through proposing five functions that aimed to facilitate ESI in the design process, a research area that received scant attention in construction research. In addition, because of the conceptual nature of the framework, it has to be validated to ensure its capability to overcome the challenges of ESI as an approach for enhancing building maintainability during the design process.\u0000\u0000\u0000Practical implications\u0000This research presents a practical solution that bridges the gap between theory and practice through overcoming the challenges that obstruct suppliers from being involved in the design process as an approach for enhancing building maintainability.\u0000\u0000\u0000Originality/value\u0000This research discussed the relationship between ESI and enhancing building maintainability as well as the roles, benefits and challenges that encounter ESI in ADFs. In addition, the research investigated the levels","PeriodicalId":46533,"journal":{"name":"Journal of Engineering Design and Technology","volume":null,"pages":null},"PeriodicalIF":2.8,"publicationDate":"2022-07-14","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"44353623","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Guest editorial: Working smarter by applying advanced technologies in construction: enhancing capacity and capability in construction sector for infrastructure project delivery","authors":"M. Babaeian Jelodar, M. Sutrisna","doi":"10.1108/jedt-08-2022-744","DOIUrl":"https://doi.org/10.1108/jedt-08-2022-744","url":null,"abstract":"Whilst there is a clear need for increased spending, embracing innovation, working smarter and collaboratively to enhance capability and capacity will also have a significant impact in bridging this gap and saving global economies valuable resources (Chen et al., 2018;World Economic Forum, 2019). [...]the topic of developing smart systems and technological advancements in facilitating, building and sustaining capacity and capability is of significance for infrastructure development and a necessity for the construction sector. [...]bibliometric and content analysis was used, and a taxonomy of risks associated to OSM was developed. [...]a novel deep CNN learning model was developed to maximise crack detection accuracy. [...]in article seven, Danquah et al. looked into the awareness of design requirements to enable future technology applications.","PeriodicalId":46533,"journal":{"name":"Journal of Engineering Design and Technology","volume":null,"pages":null},"PeriodicalIF":2.8,"publicationDate":"2022-06-29","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"48140383","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Barriers and enablers of TRIZ: a literature analysis using the TASKS framework","authors":"A. Mohammadi, Jiami Yang, Y. Borgianni, Yong-Zhi Zeng","doi":"10.1108/jedt-01-2022-0066","DOIUrl":"https://doi.org/10.1108/jedt-01-2022-0066","url":null,"abstract":"\u0000Purpose\u0000The purpose of this paper is to analyze theory of inventive problem-solving (TRIZ) in terms of knowledge, skill, workload and affect to understand its effectiveness in enabling designers to achieve their optimized mental performance.\u0000\u0000\u0000Design/methodology/approach\u0000TASKS framework, which aims to capture the causal relations among Task workload, affect, skills, knowledge and mental stress, is adopted as our methodology. The framework supports the analysis of how a methodology influence designer’s affect, skills, knowledge and workload. TRIZ-related publications are assessed using the TASKS framework to identify the barriers and enablers in TRIZ-supported design.\u0000\u0000\u0000Findings\u0000TRIZ has limitations on its logic and tools. Nevertheless, it could create a beneficial impact on mental performance of designers.\u0000\u0000\u0000Originality/value\u0000This paper provides a theory-driven TRIZ usability analysis based on the materials in the literature following the TASKS framework. The impact of TRIZ, as an enabler or a barrier, has been analyzed in accomplishing a design task.\u0000","PeriodicalId":46533,"journal":{"name":"Journal of Engineering Design and Technology","volume":null,"pages":null},"PeriodicalIF":2.8,"publicationDate":"2022-06-28","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"45820959","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Development of comprehensive energy usage impact and carbon footprint parameters for green building life cycle assessment","authors":"A. Usman, K. Abdullah","doi":"10.1108/jedt-11-2021-0655","DOIUrl":"https://doi.org/10.1108/jedt-11-2021-0655","url":null,"abstract":"\u0000Purpose\u0000The purpose of this study is to develop a set of parameters universally acceptable for assessing design and construction strategies for reducing operational energy usage and its associated greenhouse gas (GHG) emission. Also, the parameters are intended to estimate the quantity of energy and its associated GHG emission reduction over the assessment period.\u0000\u0000\u0000Design/methodology/approach\u0000This study used five steps framework comprising definition of purpose, selecting the candidate parameters, criteria selection and description, selecting proposed parameters and defining the proposed parameters. The criteria used were the parameter’s prevalence, measurability, preference and feasibility toward adaptability to the relevant stakeholders.\u0000\u0000\u0000Findings\u0000This study consolidated 11 parameters. Seven cover designs and construction strategies comprising energy monitoring, natural lighting and ventilation design. Others are building thermal performance, efficient equipments, renewable energy and energy policy. The remaining four consider operational energy consumption, GHG emission quantification and their reduction over time.\u0000\u0000\u0000Practical implications\u0000Providing suitable indicators for assessing direct and indirect GHG emission with easily accessible data is essential for assessing built environment. The consolidated parameters can be used in developing rating systems, monitoring GHG inventories and activities of building related industries.\u0000\u0000\u0000Originality/value\u0000This study was conducted at the CEIES UTHM and used 11 existing rating systems open for research purposes, International Panel for Climate Change reports and GHG protocol report and guides and several other standards.\u0000","PeriodicalId":46533,"journal":{"name":"Journal of Engineering Design and Technology","volume":null,"pages":null},"PeriodicalIF":2.8,"publicationDate":"2022-06-06","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"62081766","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Heat resistance and sorptivity of an air-entrained concrete containing mineral admixtures and CBA","authors":"Sandeep Singh, S. Sharma, M. Akbar","doi":"10.1108/jedt-01-2022-0068","DOIUrl":"https://doi.org/10.1108/jedt-01-2022-0068","url":null,"abstract":"\u0000Purpose\u0000The purpose of this work is to improve the air entrainment capacity of a concrete by using fine mineral admixtures such as fly ash (FA) and silica fume (SF) as cement substitute, and coal bottom ash (CBA) as fine aggregate substitute. Air entrainment capacity has been studied indirectly as a measure of heat resistance of concrete. Literature has suggested that mineral admixtures improve the air absorption in the paste component of the concrete, on the one hand, whereas they perform pore and grain size refinement, on the other, thereby reducing the air entrainment. CBA, which being porous, creates the possibility of air adsorption by the aggregate component. Therefore, the study finds out whether a double benefit of adding both of these materials will be achieved, or CBA will try to improve the deficiency in the air entrainment created by the mineral admixtures.\u0000\u0000\u0000Design/methodology/approach\u0000Air-entrained concrete (AEC) mixes were constituted in three groups. First group represents mixes with natural fine aggregates only, and second with 25% fine aggregates substituted by CBA. Progressively, the third group has 50% fine aggregates substituted with CBA. In all the three groups, cement was substituted with FA and SF @ 0%, 20% and 40%, and 0%, 5% and 10%, respectively, thereby creating four binary and four ternary mixes corresponding to each group. Compressive and flexural strength tests were conducted at 28 days on the concrete mixes pre and post high-temperature heat treatment, i.e. 100°C, 200°C and 400°C, respectively. This study also examines the microstructure characteristics of AEC after 14 days of curing via X-ray diffraction. Sorptivity test was also conducted to estimate the capillary and air-entrained voids in concrete.\u0000\u0000\u0000Findings\u0000It was found that a concrete mix containing 20% FA and 10% SF along with 50% CBA could give similar post-heated strength to a normal (without mineral admixtures) AEC. In AECs where only CBA is present and cement paste is not substituted, both of the pre- and post-heated strengths of concrete reduce. Also, some mixtures containing large amounts of mineral admixtures in concrete with nil CBA show a high reduction in post-heated strength though they show good pre-heated strength. Therefore, mineral admixtures and CBA complement each other in improving the post-heated strength. Air pore structure found from sorptivity test also verifies these results.\u0000\u0000\u0000Originality/value\u0000AEC is very helpful for insulation of buildings during summer season by absorbing heat waves. AEC containing FA and CBA reduces carbon footprint because of substitution of cement and it also helps to conserve natural resources by the use of CBA in place of fine aggregates.\u0000","PeriodicalId":46533,"journal":{"name":"Journal of Engineering Design and Technology","volume":null,"pages":null},"PeriodicalIF":2.8,"publicationDate":"2022-06-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"47177819","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Effect of traffic data set on various machine-learning algorithms when forecasting air quality","authors":"Ismail Sulaimon, H. Alaka, Razak Olu-Ajayi, Mubashir Ahmad, Saheed Ajayi, Abdul Hye","doi":"10.1108/jedt-10-2021-0554","DOIUrl":"https://doi.org/10.1108/jedt-10-2021-0554","url":null,"abstract":"\u0000Purpose\u0000Road traffic emissions are generally believed to contribute immensely to air pollution, but the effect of road traffic data sets on air quality (AQ) predictions has not been fully investigated. This paper aims to investigate the effects traffic data set have on the performance of machine learning (ML) predictive models in AQ prediction.\u0000\u0000\u0000Design/methodology/approach\u0000To achieve this, the authors have set up an experiment with the control data set having only the AQ data set and meteorological (Met) data set, while the experimental data set is made up of the AQ data set, Met data set and traffic data set. Several ML models (such as extra trees regressor, eXtreme gradient boosting regressor, random forest regressor, K-neighbors regressor and two others) were trained, tested and compared on these individual combinations of data sets to predict the volume of PM2.5, PM10, NO2 and O3 in the atmosphere at various times of the day.\u0000\u0000\u0000Findings\u0000The result obtained showed that various ML algorithms react differently to the traffic data set despite generally contributing to the performance improvement of all the ML algorithms considered in this study by at least 20% and an error reduction of at least 18.97%.\u0000\u0000\u0000Research limitations/implications\u0000This research is limited in terms of the study area, and the result cannot be generalized outside of the UK as some of the inherent conditions may not be similar elsewhere. Additionally, only the ML algorithms commonly used in literature are considered in this research, therefore, leaving out a few other ML algorithms.\u0000\u0000\u0000Practical implications\u0000This study reinforces the belief that the traffic data set has a significant effect on improving the performance of air pollution ML prediction models. Hence, there is an indication that ML algorithms behave differently when trained with a form of traffic data set in the development of an AQ prediction model. This implies that developers and researchers in AQ prediction need to identify the ML algorithms that behave in their best interest before implementation.\u0000\u0000\u0000Originality/value\u0000The result of this study will enable researchers to focus more on algorithms of benefit when using traffic data sets in AQ prediction.\u0000","PeriodicalId":46533,"journal":{"name":"Journal of Engineering Design and Technology","volume":null,"pages":null},"PeriodicalIF":2.8,"publicationDate":"2022-05-26","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"48736051","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Sustainable construction in the Nigerian construction industry: unsustainable practices, barriers and strategies","authors":"Emmanuel Dele Omopariola, O. Olanrewaju, I. Albert, Ayodeji Emmanuel Oke, Sunday Bankayode Ibiyemi","doi":"10.1108/jedt-11-2021-0639","DOIUrl":"https://doi.org/10.1108/jedt-11-2021-0639","url":null,"abstract":"\u0000Purpose\u0000Sustainable construction practices are strongly correlated with a profitable and competitive construction industry, improved client satisfaction and efficient use of resources. However, due consideration is not being given to sustainable construction practices in Nigeria. Therefore, this study aims to identify the unsustainable construction practices on construction sites, the barriers to sustainable construction and possible strategies to improve sustainable construction in Nigeria.\u0000\u0000\u0000Design/methodology/approach\u0000A questionnaire survey of 50 construction sites was conducted with construction professionals on the sites as the specific target, out of which only 43 construction sites have at least a construction professional present at the site. Forty-three filled questionnaires from the respondents were used for descriptive (mean score, standard deviation and charts) and inferential analysis (t-test and Kruskal–Wallis) in this study.\u0000\u0000\u0000Findings\u0000The study shows that a large percentage (75%) of construction professionals in Nigeria are aware of sustainable construction. The descriptive and inferential analysis showed a disparity in the ranking of the 12 unsustainable practices, 14 barriers and 11 strategies among the respondents. Five unsustainable practices (“negative externalities”, “excess energy”, “unsustainable technologies”, “non-management of health and safety of workers” and “material waste”), six barriers to sustainable construction (“absence of historical data and exemplary projects on which construction professionals can build and learn from”, “lack of professional to handle the task”, “poverty and low urban investment”, “lack of urban and construction policy”, “lack of awareness” and “lack of technical know-how”) and three strategies to improve sustainable construction practices in Nigeria (“cooperation, partnership and participation”, “protection of biodiversity and conservation of natural resources” and “sustainability assessment system”) were found to be significant.\u0000\u0000\u0000Practical implications\u0000The study offers significant insights into the construction industry unsustainable practices, barriers to sustainable construction, as well as strategies for improving sustainable construction practices. These insights can be applied to other developing countries with an emphasis on geographical differences.\u0000\u0000\u0000Originality/value\u0000To the best of the authors’ knowledge, this is one of the recent studies in Nigeria that explored the context of sustainable construction in the construction industry by providing insights into the unsustainable construction practices, barriers and strategies to improve sustainable construction in Nigeria.\u0000","PeriodicalId":46533,"journal":{"name":"Journal of Engineering Design and Technology","volume":null,"pages":null},"PeriodicalIF":2.8,"publicationDate":"2022-05-26","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"46407669","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Development of pavement roughness regression models based on smartphone measurements","authors":"Turki I. Al-Suleiman (Obaidat), Yazan Ibrahim Alatoom","doi":"10.1108/jedt-12-2021-0723","DOIUrl":"https://doi.org/10.1108/jedt-12-2021-0723","url":null,"abstract":"\u0000Purpose\u0000The purpose of this paper was to study the possibility of using smartphone roughness measurements for developing pavement roughness regression models as a function of pavement age, traffic loading and traffic volume variables. Also, the effects of patching and pavement distresses on pavement roughness were investigated. The work focused on establishing pavement roughness prediction models and applying these models to pavement management systems (PMS) to help decision-makers choose the best maintenance and rehabilitation (M&R) options by using cost-effective methods.\u0000\u0000\u0000Design/methodology/approach\u0000Signal processing techniques including filtering and processing techniques were used to obtain the International Roughness Index (IRI) from raw acceleration data collected from smartphone accelerometer sensors. The obtained IRI values were inputted as a dependent variable in analytical regression models as well as several independent variables with proper transformations.\u0000\u0000\u0000Findings\u0000According to the study results, several regression models were developed with a big variation in the coefficients of determination (R2). However, the best models included pavement age, accumulated traffic volume (∑TV) and construction quality factor (CQF) with R2 equal to 0.63. It was also found that the effects of pavement distresses and patching was significant at a-level < 0.05. The patching effect on pavement roughness was found higher than the effect of other pavement distresses.\u0000\u0000\u0000Practical implications\u0000The presented results and methods in this paper could be used in the future predictions of pavement roughness and help the decision-makers to estimate M&R needs. The work focused on establishing IRI prediction models and applying these models to the PMS to help decision-makers choose the best M & R options.\u0000\u0000\u0000Originality/value\u0000To develop sound pavement roughness models, it is essential to collect roughness data using automated procedures. However, applying these procedures in developing countries faces several difficulties such as the high price and operation costs of roughness equipment and lack of technical experience. The advantage of using IRI values taken from smartphones is that the roughness evaluation survey may be expanded to cover the full road network at a cheaper cost than with automated instruments. Therefore, if the roughness survey covers more roads, the prediction model’s accuracy will be improved.\u0000","PeriodicalId":46533,"journal":{"name":"Journal of Engineering Design and Technology","volume":null,"pages":null},"PeriodicalIF":2.8,"publicationDate":"2022-05-24","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"42084586","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Conceptual review study of working capital management practices in the construction industry: trends and research prospects in Ghana","authors":"E. Asare, D. Owusu-Manu, J. Ayarkwa, D. J. Edwards","doi":"10.1108/jedt-01-2022-0017","DOIUrl":"https://doi.org/10.1108/jedt-01-2022-0017","url":null,"abstract":"\u0000Purpose\u0000The concept of working capital management (WCM) has been a fundamental financial accounting term that has evolved in financial theory for centuries. Given that the construction industry (CI) is financially dynamic, there is an imperative need to understand its WCM practices. The call for the industry players to adhere to efficient financial management practices as a result of a huge financing gap requires consented effort. This study aims to explore the trend of practices of WCM in the CI and elicit a broader polemic dialogue about this crucial theme.\u0000\u0000\u0000Design/methodology/approach\u0000The source of information for the study was secondary mainly from referenced journals and international conference papers published on WCM relating to the CI. A three-step sample selection strategy was adopted to identify the range and scope of publications on WCM in the CI based on the systematic literature review method.\u0000\u0000\u0000Findings\u0000The CI cannot boost of enough empirical WCM research to gain in-depth understanding of its practical trend. The developing economies are failing to produce insightful peer-reviewed papers on WCM to assist in bridging the infrastructural financing gap through apposite strategies. Gaining appropriate knowledge of the short-term financial operations through a conceptualization of WCM practices in the CI may lead to better strategies formulated for smooth operations.\u0000\u0000\u0000Originality/value\u0000This is a pioneering paper in developing economies that have taken stock of WCM knowledge of the practical trend in the CI. Future research prospects in which WCM matters can use it as a reference point.\u0000","PeriodicalId":46533,"journal":{"name":"Journal of Engineering Design and Technology","volume":null,"pages":null},"PeriodicalIF":2.8,"publicationDate":"2022-05-17","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"43411066","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}