Colleen C. V. Chan, K. Neufeld, D. Cusworth, Stevan Gavrilovic, To Ngai
{"title":"Investigation of the Effect of Grain Size, Flow Rate and Diffuser Design on the CAWST Biosand Filter Performance","authors":"Colleen C. V. Chan, K. Neufeld, D. Cusworth, Stevan Gavrilovic, To Ngai","doi":"10.24908/IJSLE.V10I1.5705","DOIUrl":"https://doi.org/10.24908/IJSLE.V10I1.5705","url":null,"abstract":"The effects of grain size, hydraulic loading rate, batch residence time and diffuser design on the performance of the CAWST version 10 biosand filter was investigated. Two types of sand gradations were prepared – fine sand (ES = 0.20, UC = 2.3) and a coarse sand (ES = 0.25, UC = 2.9). The fine sand and coarse grains resulted in initial hydraulic loading rates of 0.3 m 3 /m 2 min and 0.75 m 3 /m 2 min, respectively. Flow restrictions were installed on 2 coarse grain filters such that their initial hydraulic loading rates were 0.3 m 3 /m 2 min. For the range of grain size and flow rates investigated in this paper, coarse grain size leads to lower bacterial removal efficiencies compared to the fine grain size. The addition of flow restrictions on filters with coarse grain size did not result in improvement in bacterial removal efficiencies. Two different diffuser designs were also investigated (hole size of 1/8 inch or 3.2 mm and 0.5 inch or 12.7 mm spacing, hole size of 3/16 inch or 9.5 mm and 0.5 inch or 12.7 mm spacing). These filters were compared to the standard design of CAWST version 10 filter, i.e. control filter, which has a hole size of 1/8 inch (3.2 mm) and 1 inch (25.4 mm) spacing. Diffuser design was found to have an effect on the bacterial removal efficiency. The two diffuser investigated (smaller hole size, tighter spacing) resulted in lower bacterial removal efficiencies, compared to the CAWST specified diffuser design. Batch residence time was found to have a significant effect on bacterial removal. The deficiencies caused by diffuser design, coarse grain size were compensated by a higher batch residence time.","PeriodicalId":443545,"journal":{"name":"International Journal for Service Learning in Engineering, Humanitarian Engineering and Social Entrepreneurship","volume":"67 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2015-06-25","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"134639849","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Qualitative Assessment of the Learning Outcomes of an International Service Learning Project in Civil Engineering","authors":"A. Jeffers, Paul A. Beata, B. Strassmann","doi":"10.24908/IJSLE.V10I1.5707","DOIUrl":"https://doi.org/10.24908/IJSLE.V10I1.5707","url":null,"abstract":"A qualitative study was performed to determine the learning outcomes of an international service learning project in civil engineering. The university program involves the student-led design and construction of suspended pedestrian bridges in rural Bolivia. Five students traveled to Bolivia for a period of four weeks to oversee the construction of a bridge. The students were asked to keep reflective journals that were guided by a series of writing prompts. We analyzed the qualitative data within a phenomenological framework, which allowed common themes to be identified from the data. The measured learning outcomes include technical competency, adaptability, creativity, global competency, cross-cultural communication skills, and teamwork and interpersonal communication skills. The data are examined in relation to relevant literature and supporting quotes from the students’ journals are provided. Our findings support the ideas that international service learning experiences in engineering strengthen global competency and communication, improve mastery of technical skills, and instill an understanding of the social context of engineering work. Additionally, complications that arose in the field taught the students adaptability, which is defined here as the ability to modify an engineering design to meet the constraints imposed in the field. As a result of our analysis, we propose reflection questions that allow the assessment of technical and non-technical learning outcomes.","PeriodicalId":443545,"journal":{"name":"International Journal for Service Learning in Engineering, Humanitarian Engineering and Social Entrepreneurship","volume":"25 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2015-06-25","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"124503913","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Felipe Tendick-Matesanz, Emily Q. Ahonen, M. Zellner, S. Lacey
{"title":"Applying Evaluative Thinking to a Community-Engaged Safe Drinking Water Project in Peri-Urban Guatemala","authors":"Felipe Tendick-Matesanz, Emily Q. Ahonen, M. Zellner, S. Lacey","doi":"10.24908/IJSLE.V10I1.5708","DOIUrl":"https://doi.org/10.24908/IJSLE.V10I1.5708","url":null,"abstract":"A large number of safe drinking water programs fail to create long-lasting solutions because safe drinking water problems are complex and necessitate multiple kinds of expertise at several levels of influence over often long periods of time to succeed. Such work is especially challenging in a service-learning context. Process-oriented ways of working such as evaluative thinking and community engagement may be useful ways to frame iterative phases of work on drinking water projects. Here we describe our use of both in an interdisciplinary university student project to develop and implement collaborative plans for a safe drinking water intervention in peri-urban Guatemala, complications related to its implementation, and measures and sources of data for evaluating health, energy, and cost outcomes over time. We also assess our successes and failures to date. Though full implementation of the intervention has not been achieved and work is ongoing, we provide this report as an outline which other groups pursuing public health engineering projects may find useful.","PeriodicalId":443545,"journal":{"name":"International Journal for Service Learning in Engineering, Humanitarian Engineering and Social Entrepreneurship","volume":"20 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2015-06-25","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"123893993","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Development of a Modular Home Construction Kit using the Rammed Earth Building Technique","authors":"V. Sooklal","doi":"10.24908/IJSLE.V10I1.5706","DOIUrl":"https://doi.org/10.24908/IJSLE.V10I1.5706","url":null,"abstract":"In developing countries where resources are limited, the task of providing shelter for poverty stricken communities that are already in dire need of basic amenities can be a daunting one. This paper proposes a solution to this housing issue in the form of a modular home construction kit. These kits will provide such communities with a tool for sustainably constructing their own dwellings using local manpower combined with the natural resources available on site. The technique is based on the rammed earth principle in which the raw material for the construction process is primarily the natural soil present at the targeted location. This result in considerable savings in terms of sourcing and transporting costs of building materials typically used in traditional constructions methods. In addition, heavy or powered equipment is not needed for this construction technique making it a viable option for places where an electrical power supply or fuel source is not available. The project is part of a service-learning program, recently introduced at the University of Colorado at Colorado Springs to afford students an opportunity to work on a multidisciplinary team while using their engineering knowledge to provide solutions to real world problems. The student team working on the project has been involved in developing all the necessary procedures for assessment of the location’s soil type as well as the design and sourcing of the kit components. They will also be required to develop the necessary instructional and training material to allow for assembly of the kit components and the implementation of the technique to produce a finished structure (excluding the roof).","PeriodicalId":443545,"journal":{"name":"International Journal for Service Learning in Engineering, Humanitarian Engineering and Social Entrepreneurship","volume":"17 1 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2015-06-25","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"129546649","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Engineering and Engaged Scholarship at Penn State Part II: The Existing Ecosystem","authors":"T. Colledge","doi":"10.24908/IJSLE.V0I0.5609","DOIUrl":"https://doi.org/10.24908/IJSLE.V0I0.5609","url":null,"abstract":"The objective of engineering education is to educate students who are ‘ready to engineer’. This implies that students should be broadly prepared with not only deep knowledge and understanding of the technical fundamentals, but also the pre-professional skills required to be successful in the engineering workplace of today and tomorrow 1 . Part I of this paper includes a brief rationale and need for ‘Engaged Scholarship’ and the inherent need for a robust ecosystem to support it. Part II details the existing curricular, co-curricular, and extra-curricular efforts which form the core for the engaged scholarship ecosystem in the College of Engineering at the Pennsylvania State University. Curricular, co-curricular and extra-curricular opportunities for students are detailed. Part III provides an overview of how this assortment of minors, certificates, programs, courses, and student organizations is being integrated and institutionalized into a strategic mission for the University.","PeriodicalId":443545,"journal":{"name":"International Journal for Service Learning in Engineering, Humanitarian Engineering and Social Entrepreneurship","volume":"89 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2014-12-31","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"117147985","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"SUNY College of Environmental Science and Forestry Humanitarian Engineering: Small Scale College Components and Analysis","authors":"Thomas Decker, T. Endreny","doi":"10.24908/IJSLE.V0I0.5548","DOIUrl":"https://doi.org/10.24908/IJSLE.V0I0.5548","url":null,"abstract":"The State University of New York College of Environmental Science and Forestry (SUNY-ESF) enrolls approximately 1900 bachelor students and 600 master’s and PhD students focusing on the science and engineering of environmental sustainability. To satisfy student and employer interests in sustainable international development, ESF has developed a humanitarian engineering program. The program includes theoretical and field based course work, trips abroad, student organizations, and the establishment of the National Academy of Engineering Grand Challenges Scholar’s Program (NAE GCSP). This manuscript describes the history, components, challenges, best practices, lessons learned, case studies, and outcomes of ESF’s small-scale yet successful humanitarian engineering program.","PeriodicalId":443545,"journal":{"name":"International Journal for Service Learning in Engineering, Humanitarian Engineering and Social Entrepreneurship","volume":"59 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2014-12-31","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"127123420","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Engineering and Engaged Scholarship at Penn State Part I: The Rationale","authors":"T. Colledge","doi":"10.24908/IJSLE.V0I0.5587","DOIUrl":"https://doi.org/10.24908/IJSLE.V0I0.5587","url":null,"abstract":"The objective of engineering education is to educate students who are ‘ready to engineer’. This implies that students should be broadly prepared with not only deep knowledge and understanding of the technical fundamentals, but also the pre-professional skills required to be successful in the engineering workplace of today and tomorrow 1 . Part I of this paper includes a brief rationale and need for ‘engaged scholarship’ to help accomplish these goals, and the inherent need for a robust ecosystem to support it. A summary is provided of the outcome-based objectives for the training of engineers as well as the industry-identified personal competencies required. The role of the university in engaged scholarship is examined along with the benefits and impediments to its implementation. A definition of educational ecosystem is provided. Part II details the existing engaged scholarship ecosystem in the College of Engineering at the Pennsylvania State University, while Part III provides an overview of how this assortment of minors, certificates, programs, courses, and student organizations is being integrated and institutionalized into a strategic mission for the University.","PeriodicalId":443545,"journal":{"name":"International Journal for Service Learning in Engineering, Humanitarian Engineering and Social Entrepreneurship","volume":"102 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2014-12-31","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"127210300","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Case Studies from a Community-Focused Engineering Program with Projects in Haiti and Nicaragua","authors":"Sara Glade, Cara M. Karter, K. Pagilla","doi":"10.24908/IJSLE.V0I0.5584","DOIUrl":"https://doi.org/10.24908/IJSLE.V0I0.5584","url":null,"abstract":"Engineers Without Borders - USA at the Illinois Institute of Technology is an extracurricular, student-led engineering program that has conducted service-oriented engineering development projects in Haiti and Nicaragua that strive to meet the basic infrastructure needs of our partner communities. Projects have ranged from water-distribution, solar electrification, and small and large-scale structures. By participating in the program, students gain real-world experience applying technical skills to a project as well as significant leadership and project management experience. They also gain insights into cultural communication and grow a passion for service learning. The purpose of this paper is to share the challenges we have faced as well as our best practices and governance structure in order to allow other programs to learn from our experience developing relationships with our university, engaging with multiple international partners, and involving a variety of disciplines and skill-levels in our program.","PeriodicalId":443545,"journal":{"name":"International Journal for Service Learning in Engineering, Humanitarian Engineering and Social Entrepreneurship","volume":"31 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2014-12-31","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"116801856","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Engineering for Developing Communities at the University of Colorado Boulder: A Ten Year Retrospective","authors":"Robyn Sandekian, P. Chinowsky, B. Amadei","doi":"10.24908/IJSLE.V0I0.5544","DOIUrl":"https://doi.org/10.24908/IJSLE.V0I0.5544","url":null,"abstract":"The University of Colorado Boulder started its Engineering for Developing Communities Program with a graduate track in environmental engineering in 2004. Over the past ten years, the program has expanded to include undergraduate- and graduate-level certificates and involves approximately twenty percent of the graduate students within the Department of Civil, Environmental, and Architectural Engineering. This article describes the history and current status of our program including challenges and successes that have led us to where we are today. We briefly describe our undergraduate and graduate certificate curricula, share course descriptions and evaluation methods and results, highlight student employment outcomes, and reveal lessons learned. This discussion should prove useful to faculty and administrators, from department chairs to chief academic officers, who might be considering adding this type of program at a research-intensive university such as ours.","PeriodicalId":443545,"journal":{"name":"International Journal for Service Learning in Engineering, Humanitarian Engineering and Social Entrepreneurship","volume":"1 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2014-12-31","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"129688313","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Gregory D. Bixler, J. Campbell, R. Dzwonczyk, H. Greene, J. Merrill, K. Passino
{"title":"Humanitarian Engineering at The Ohio State University: Lessons Learned in Enriching Education While Helping People","authors":"Gregory D. Bixler, J. Campbell, R. Dzwonczyk, H. Greene, J. Merrill, K. Passino","doi":"10.24908/IJSLE.V0I0.5545","DOIUrl":"https://doi.org/10.24908/IJSLE.V0I0.5545","url":null,"abstract":"Humanitarian engineering at The Ohio State University (OSU) has enriched our delivery of engineering education and at the same time led, via collaborative engagement, to helping people and communities. Here, we describe our curricular program, extracurricular activities, domestic and international projects, meetings and coordination, and our new Humanitarian Engineering Center. Throughout, we provide “lessons learned” for all these categories, and in conclusion provide some general lessons and challenges for engineering education.","PeriodicalId":443545,"journal":{"name":"International Journal for Service Learning in Engineering, Humanitarian Engineering and Social Entrepreneurship","volume":"21 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2014-12-31","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"115921005","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}