{"title":"\"Strength Analysis of Ceramic Dust Based Concrete with Partial Replacement of Cement by Polypropylene Fiber\"","authors":"Ashish Chadel","doi":"10.55524/ijirem.2022.9.4.8","DOIUrl":"https://doi.org/10.55524/ijirem.2022.9.4.8","url":null,"abstract":"The utilisation of mineral admixtures such as ceramic dust, fly ash, and metakoline, amongst others, will result in the production of high-performance concrete. The effect that the percentage of ceramic dust and polypropylene fibre has on the mechanical properties of concrete has been investigated in this study. The purpose of this research was to investigate what happened when ceramic dust, polypropylene fibres, or a combination of the two were used to substitute cement in cement concrete. Ceramic dust content was varied as 5%, 10%, 15%, and 20% by weight replacement of cement, and polypropylene fibre was varied as 0.25%, 0.50%, 0.75%, and 1.0% by weight replacement of cement in order to investigate the effects of these two additives on the workability, compressive strength, and split tensile strength of concrete after 7, 28, and 90 days of curing time. The performance of the concrete in terms of its mechanical qualities was improved manyfolds with the addition of polypropylene fibres and ceramic dust; however, the results are astonishing when both types of additives are used together.","PeriodicalId":439052,"journal":{"name":"International Journal of Innovative Research in Engineering & Management","volume":"65 6 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2022-08-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"131571682","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"\"Experimental Study on Effect of Partial Replacement of Coarse Aggregates in Concrete by Waste Tyre Rubber Aggregates in Rigid Pavements\"","authors":"Waqar Ahmed, Er. Rabinder Singh, Insha Kouser","doi":"10.55524/ijirem.2022.9.4.9","DOIUrl":"https://doi.org/10.55524/ijirem.2022.9.4.9","url":null,"abstract":"Our study intends to explore the flexural and split tensile strength, light weight, higher impact and toughness resistance which means prolonged and better resistance to formation of cracks, upgraded ductility, etc most effective use of the waste tyre rubber as a constituent of concrete mix replacing the coarse aggregate partially. In this research work, emphasis is given on the pre-treating of the rubber particles and then using them as the partial replacement of the conventional rock aggregates. To get the best results, the rubber aggregates used are surface treated by sodium hydroxide and cement paste before using them in the concrete.M20 grade concrete is used. Using untreated rubber aggregates, the compressive strength of the resultant concrete reduced rapidly, but when treated rubber aggregates were introduced, it resulted in the regaining of more than 90% of the 28 day compressive strength of normal concrete which can be considered quite satisfactory considering the easy and cheap availability of the used tyres and the negative impacts it can have on the environment if left unused. This much compressive strength is enough for treated-rubberized concrete for its use in different areas where compressive strength is not much important like in floors and concrete road pavements. Flexural and split tensile strength is found to be higher than that of the normal concrete but only when treatment is given to the rubber aggregates before using them. Workability is decreased. Flexibility gets increased and due to the lower unit weight of the rubber particles, it is also lighter than the normal concrete.","PeriodicalId":439052,"journal":{"name":"International Journal of Innovative Research in Engineering & Management","volume":"15 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2022-08-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"125095841","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"A Cloud Based Machine Intelligent Framework to Identify DDoS Botnet Attack in Internet of Things","authors":"Sourav Kumar Bhoi, K. Prasad. K","doi":"10.55524/ijirem.2022.9.4.1","DOIUrl":"https://doi.org/10.55524/ijirem.2022.9.4.1","url":null,"abstract":"First few Botnet attack is a major issue in security of Internet of Things (IoT) devices and it needs to be identified to secure the system from the attackers. In this paper, a cloud-based machine intelligent framework is proposed to identify DDoS (distributed denial of service) Botnet attack in IoT systems. In this framework, the IoT devices communicating with the cloud are categorized based on their communication record to check the DDoS Botnet attack. In this work, three DDoS botnet attacks are considered such as HTTP, UDP, and TCP. The cloud is installed with a supervised machine intelligent model to classify the type of DDoS attack. The model is selected by considering 4 models such as Tree, stacking classifier, Neural Network (NN), and Support Vector Machine (SVM) and performance is evaluated based on classification accuracy (CA). Here, the stacking classifier is a hybrid model designed using the aggregation of Logistic Regression (LR), NN, and SVM. The performance is evaluated using Python tool. From the results it was found that except Tree all three models show an CA of 1.0. The computation time is also analyzed for four models and it was found that Tree shows less time than other models however, if considered with respect to CA (1.0) then SVM can be preferred as it shows lesser time then other two models. The detection time of the IoT devices is also simulated and result show that if SVM is installed in cloud then the detection time is lesser.","PeriodicalId":439052,"journal":{"name":"International Journal of Innovative Research in Engineering & Management","volume":"41 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2022-08-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"122249999","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Determination of Shear Strength of Organic Soil in Kashmir","authors":"A. Mushtaq, Er Anuj Sachar","doi":"10.55524/ijirem.2022.9.4.12","DOIUrl":"https://doi.org/10.55524/ijirem.2022.9.4.12","url":null,"abstract":"As a conference and tourist resort hub, Kashmir is one of India’s most rapidly expanding states. There is a lot of building work going on right now. It's also projected that there will be a lot more building in the future. However, there has been relatively little research on the engineering qualities of Kashmir valley’s soils. Shear strength, or the capacity to resist sliding along internal surfaces inside a soil mass, is one of the most essential engineering qualities of soil. All stability assessments in geotechnical engineering, whether they be for foundations, slopes of cuttings, or earth dams, require a fundamental understanding of this soil engineering feature. The shear strength parameters of Kashmir’s alluvial soil are going to be investigated in this study. The shear strength parameters (c and Ф) are investigated using disturbed soil samples that have been remoulded with various densities and water contents to imitate field conditions. Infrastructural developments have now progressed in Jammu and Kashmir and strength evaluation of peat remains complex and uncertain. Considering failures of infrastructures resulting from inappropriate measurement of peat shear strength, this research paper present on the shear strength of peat and the modification of existing testing methods to assess its strength in the laboratory and on the field. The initial part of this research is the laboratory testing of peat specimens. Scanning electron microscopy (SEM), triaxial tests are conducted to characterise the morphology, compressibility and shear strength properties of peat. The results of the microstructural and compressibility analysis are presented together with the triaxial stress-strain analysis. The analysed results show the effect of decomposition on peat and shear strength characteristics.","PeriodicalId":439052,"journal":{"name":"International Journal of Innovative Research in Engineering & Management","volume":"60 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2022-08-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"133281890","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"\"Soil Stabilization Using Rice Husk Ash and Coir Fibre \"","authors":"M. Sharma, Ashok Kumar","doi":"10.55524/ijirem.2022.9.4.13","DOIUrl":"https://doi.org/10.55524/ijirem.2022.9.4.13","url":null,"abstract":"Soil stabilization is major problem for construction and experimental purposes. Now a days used practical work greatly explains the suitable characters of the locally available Rice Husk Ash (RHA) to be used in the local construction industry in a way to minimize the amount of waste Released in environment causing issues to nature to the environment causing environmental pollution. The soil stabilization methods used in present are very costly because of costly available stabilizing materials like, cement, lime, etc. The cost of stabilization may be minimized by replacing a good proportion of stabilizing agent using RHA. It will minimize the environmental hazards also. Soil sample taken for the study is clay with high plasticity (CH) that requires stabilization. The soil is stabilized using additives rice husk ash and a small amount of coir fibre. Various results are made that shows changes in Maximum dry density (MDD), Optimum moisture content (OMC). California bearing ratio (CBR) and Unconfined compressive stress (UCS). The results obtained in the present study show that the increase in RHA content increases the OMC but decreases the MDD. Also, the CBR value and UCS of soil are considerably improved with the RHA content. From the observation of maximum improvement in strength, 10% RHA content with 6% coir fibre is recommended as optimum amount for practical purposes.","PeriodicalId":439052,"journal":{"name":"International Journal of Innovative Research in Engineering & Management","volume":"51 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2022-08-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"133348495","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Experimental Study on Physico-Chemical Parameters of Ground Water at Peth Seer Sopore J&K","authors":"Sumaya Akhter, Richika Rathore, Tanveer Rasoo","doi":"10.55524/ijirem.2022.9.4.3","DOIUrl":"https://doi.org/10.55524/ijirem.2022.9.4.3","url":null,"abstract":"Human activities, use of fertilizers and chemicals in agricultural fields are the main causes of ground water contamination. Therefore to protect and improve the natural eco system, water quality analysis is essential. The main goal of this work is to study the criteria governing the groundwater quality in the nearby wells of Peth Seer, Sopore J&K. Total 12 groundwater samples and 15 water quality parameters for each sample are considered in this study. The ground water samples of all the selected stations were collected for a physiochemical analysis. For calculating present water quality status, following 16 parameters have been considered Viz. pH, TDS, EC, Chloride concentration, Nitrate concentration, Sulphate concentration, Alkalinity, Fluoride concentration, Total hardness, Magnesium, Calcium, Sodium, Potassium, Temperature, Turbidity, Residual chlorine. The obtained results are compared with WHO (2017). The study reveals that the concentrations of all the constituents are well within the permissible limits of WHO (2017). Groundwater in the study area is suitable for drinking purpose as prescribed by WHO (2017) and irrigation purposes as prescribed by IS-11624(1986).","PeriodicalId":439052,"journal":{"name":"International Journal of Innovative Research in Engineering & Management","volume":"66 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2022-08-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"114993522","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Text Extraction from Image","authors":"Ojas Kumar Barawal, Dr. Yojna Arora","doi":"10.55524/ijirem.2022.9.3.12","DOIUrl":"https://doi.org/10.55524/ijirem.2022.9.3.12","url":null,"abstract":"Text extraction is one of the key tasks in document image analysis. Automatic text extraction without characters recognition capabilities is to extract regions just contains text. The text extraction process includes detection, localization, segmentation and enhancement of the text from the given input image. In this paper we present a comparative study and performance evaluation of various text extraction techniques.","PeriodicalId":439052,"journal":{"name":"International Journal of Innovative Research in Engineering & Management","volume":"1 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2022-06-20","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"130644758","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Determinants of Household Healthcare Choice Behavior: A Study in Purulia District, West Bengal","authors":"Santanu Bhattacharya, Dr. Sebak Kumar Jana","doi":"10.55524/ijirem.2022.9.3.1","DOIUrl":"https://doi.org/10.55524/ijirem.2022.9.3.1","url":null,"abstract":"A well organised healthcare system is one of the pillars of a society’s social and economic infrastructure. Efficient healthcare system is one of the important indicators of development. In times of global epidemics Covid-19 healthcare seeking behaviour has become an important issue. People adjust their treatment modalities based on the health system. Poor families in particular have very limited access to medical care; they usually rely on government medical facilities because they cannot afford private treatment. On the other hand, even in rural areas, access to medical care limited due to lack of additional healthcare facilities. Therefore in rural area’s it is very important to diagnose the factors that influence the health seeking behaviour of the household. The Specific objectives of the study are to investigate health status of households across Purulia district using secondary data from NFHS- 4 (2015-2016) and to determine the factors that influencing health seeking behaviour of the sample households. We have visited randomly selected three villages of Kashipur block in Purulia district, West Bengal and surveyed two hundred households. To determine the factors that influencing household healthcare seeking behaviour we have fitted logit model. The explanatory variables monthly average family income, household head’s education, number of members in a household above 60 years, number of members in a household below 6 years, having at least one member who consume medicines during the whole year, effect of Covid-19 on income, effect of Covid-19 on health, social category, village residence have positive significant impact on the probability of household members seeking treatment from both government and private places. We consider ST as our base and find that the general community has significant impact on the household members receiving treatment from both government and private places. From the result we find that the major source of income of the sample households has no significant impact on the healthcare seeking behaviour of sample households.","PeriodicalId":439052,"journal":{"name":"International Journal of Innovative Research in Engineering & Management","volume":"6 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2022-06-20","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"126559343","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Praveen Hugar, Mayur Pershad, T. Sathvika, Ganesh Bhukya
{"title":"Malware Recognition Using Machine Learning Methods Based on Semantic Behaviors","authors":"Praveen Hugar, Mayur Pershad, T. Sathvika, Ganesh Bhukya","doi":"10.55524/ijirem.2022.9.3.6","DOIUrl":"https://doi.org/10.55524/ijirem.2022.9.3.6","url":null,"abstract":"Malware is any programme that gains access to or instals itself on a computer without the permission of the system's administrators. For cyber-criminals to achieve their nefarious objectives and purposes, a variety of viruses has been widely deployed. To tackle the growing number of malicious programmes and lessen their hazard, a novel deep learning framework is developed that employs NLP approaches as a starting point and combines CNN and LSTM neurones to record locally spatial correlations and learn from sequential longterm dependencies. As a result, for the malware classification job, high-level abstractions and representations are automatically derived. The accuracy of categorization rises from 0.81 (best by Random Forest) to about 1.0.","PeriodicalId":439052,"journal":{"name":"International Journal of Innovative Research in Engineering & Management","volume":"19 11","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2022-06-20","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"132645465","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Sameen ul haq ahmad, S. Saini, Sheikh Safiullah, Zahid Farooq
{"title":"Fuzzy Logic Based Load Frequency Control of Hybrid Power System Integrated with SMES","authors":"Sameen ul haq ahmad, S. Saini, Sheikh Safiullah, Zahid Farooq","doi":"10.55524/ijirem.2022.9.3.7","DOIUrl":"https://doi.org/10.55524/ijirem.2022.9.3.7","url":null,"abstract":"The use of a Fuzzy logic-based controller for automatic generation control (AGC) and load frequency control (LFC) of two area power plants in an interconnected power system is proposed in this paper. In addition, a superconducting magnetic Energy Storage (SMES) unit is being considered in two areas. After a sudden load disturbance, the implementation of SMES combination arrests the initial fall in frequency deviation and tie-line power deviation. The simulation results show that the proposed SMES unit improves system performance significantly. The system's sensitivity analysis is carried out by altering the parameters and operating load conditions from their nominal values. Even when the system is subjected to wide variations in loading conditions and system parameters, the optimised gains of the proposed fuzzy logic- based controller and fuzzy controller along with SMES controllers do not need to be reset. Finally, different types of load patterns are used to test the effectiveness of the proposed controller design. The simulation results show that the Fuzzy PID controller combined with SMES outperforms the Fuzzy PID controller alone. The simulations were run using the MATLAB software.","PeriodicalId":439052,"journal":{"name":"International Journal of Innovative Research in Engineering & Management","volume":"49 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2022-06-20","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"131634356","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}