{"title":"Cavity-backed monopole antenna for UAV communication applications","authors":"Ayman Elboushi, Sulaiman Alsulaiman, K. Jamil","doi":"10.1109/APWC.2017.8062275","DOIUrl":"https://doi.org/10.1109/APWC.2017.8062275","url":null,"abstract":"In this paper, a directive, robust, and light weight antenna for Unmanned Arial Vehicles (UAV) communication applications is presented. The proposed antenna exhibits dualband operation from 4.53 GHz to 5.16 GHz with a bandwidth of 13.26% and from 5.3 GHz to 5.9 GHz with a bandwidth of 10.7%. Furthermore, it is characterized by good and stable radiation characteristics with overall realized gain of 7.07 dB at 4.7 GHz and 7.9 dB at 5.68 GHz. The proposed design shows flexible ability in terms of tuning the resonance frequencies by scaling some design parameters. The antenna is simulated and optimized using both CSTMWS and HFSS. The two different simulators shows very good agreement in terms of the operating bands and the radiation patterns.","PeriodicalId":439001,"journal":{"name":"2017 IEEE-APS Topical Conference on Antennas and Propagation in Wireless Communications (APWC)","volume":"41 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2017-09-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"116464727","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Design of a passive microwave sensor for the characterization of mobile engine oil","authors":"F. Mejri, T. Aguili","doi":"10.1109/APWC.2017.8062298","DOIUrl":"https://doi.org/10.1109/APWC.2017.8062298","url":null,"abstract":"We are interested in this work to the design and more particularly the achievement of a passive and inexpensive microwave RFID sensor. This will be allowing us to control and to monitor the quality of the engine oil of a mobile. The sensor consists of a dipole placed inside the oil sump of the mobile. Knowing the variation of the relative permittivity of the engine oil, as a function of the distance travelled, we can detect when the latter is worn and when the emptying operation has to be carried out. The principle of this method consists in going back to the value of the relative permittivity of the engine oil from the variation of the resonant frequency of the dipole. This variation in frequency is directly related to the degradation of the engine oil. Analysis of the results of simulations and measurements showed a good sensitivity of the sensor, depending on the distance travelled.","PeriodicalId":439001,"journal":{"name":"2017 IEEE-APS Topical Conference on Antennas and Propagation in Wireless Communications (APWC)","volume":"8 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2017-09-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"127779506","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"A 2.45 GHz harmonic rejection antenna for wireless power transfer applications","authors":"A. Kumar, U. Pattapu, A. Das, S. Das","doi":"10.1109/APWC.2017.8062247","DOIUrl":"https://doi.org/10.1109/APWC.2017.8062247","url":null,"abstract":"This paper presents a ring loaded arrow shaped ground slot harmonic rejection antenna for 2.45 GHz wireless power transfer applications. By using open stub and H-slot in the feed-line, higher order harmonics have been suppressed. The antenna has been developed on a 1.6 mm FR4 substrate (εr=4.4) and has 19 dB return loss at 2.45 GHz, 264 MHz 10 dB return loss bandwidth, 3.8 dB gain, and 92% radiation efficiency, which makes it suitable for the proposed application.","PeriodicalId":439001,"journal":{"name":"2017 IEEE-APS Topical Conference on Antennas and Propagation in Wireless Communications (APWC)","volume":"30 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2017-09-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"114946644","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Dojana Salama, M. N. Abdallah, T. Sarkar, M. Salazar-Palma
{"title":"Smart non-uniform antenna arrays deployed above an imperfect ground lane at multiple frequencies","authors":"Dojana Salama, M. N. Abdallah, T. Sarkar, M. Salazar-Palma","doi":"10.1109/APWC.2017.8062304","DOIUrl":"https://doi.org/10.1109/APWC.2017.8062304","url":null,"abstract":"In this paper, it is illustrated how to carry out adaptive processing simultaneously at multiple frequencies using the same antenna array consisting of dissimilar antenna elements nonuniformly spaced and deployed above an imperfect ground plane. First, an electromagnetic transformation technique is described which can compensate for all non-ideal effects of an antenna array deployed in a real environment, such as mutual coupling between the elements, the presence of an imperfect ground, etc. Then, a direct data domain least squares method is used to extract the signal-of-interest (SOI) in the presence of jammer and clutter simultaneously at multiple frequencies, using a single snap shot of the data. The interferers/jammers can come from multiple directions, frequencies and can even be non-coherent.","PeriodicalId":439001,"journal":{"name":"2017 IEEE-APS Topical Conference on Antennas and Propagation in Wireless Communications (APWC)","volume":"11 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2017-09-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"123934528","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"A new wireless sensor network module for health monitoring of civil structures","authors":"L. Carosso, M. Allegretti, S. Bertoldo","doi":"10.1109/APWC.2017.8062226","DOIUrl":"https://doi.org/10.1109/APWC.2017.8062226","url":null,"abstract":"The work presents the results of a project concerning the study and the prototypal realization of an innovative low cost module for Structural Health Monitoring (SHM) that would allow the measurement of internal displacements inside civil structures. A set of these sensors could also be part of wide Wireless Sensor Network (WSN). The basic working principle of the sensor is the Hall Effect. This effect is the result of a magnetic field applied to a conductor, which moves the electrons toward one of the extremes of the conductor itself generating an electric signal. The Hall Effect sensor measures the voltage variation, due to the variation in the distance between two equal sensors inserted in the structure undergoing deformation. The description of the sensor is given together with the explanation of its possible installation mode. Test results are presented with the discussion of possible practical use of sensors.","PeriodicalId":439001,"journal":{"name":"2017 IEEE-APS Topical Conference on Antennas and Propagation in Wireless Communications (APWC)","volume":"13 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2017-09-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"124024056","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
M. Ishfaq, T. Rahman, Yoshihide Yamada, K. Sakakibara
{"title":"8×8 Phased series fed patch antenna array at 28 GHz for 5G mobile base station antennas","authors":"M. Ishfaq, T. Rahman, Yoshihide Yamada, K. Sakakibara","doi":"10.1109/APWC.2017.8062268","DOIUrl":"https://doi.org/10.1109/APWC.2017.8062268","url":null,"abstract":"5G, the next generation of wireless communications, is focusing on modern antenna technologies like massive MIMO, phased arrays and mm-wave band to obtain data rates up to 10 Gbps. In this paper, we have proposed a new 64 element, 8×8 phased series fed patch antenna array, for 28 GHz, mm-wave band 5G mobile base station antennas. The phased array steers its beam along the horizontal axis to provide the coverage to the users in different directions. The 8×8 array contains eight 8-element series fed arrays. The series fed array is designed in such a way that it shows a mixed standing wave and travelling wave behaviour. The initial seven elements of the series fed array show a standing wave behaviour, while the eighth element shows a travelling wave behaviour. It is due to the provision of the matched inset feeding, to effectively radiate the maximum power arriving at this element. The array is operating from 27.9 GHz to 28.4 GHz with a 500 MHz impedance bandwidth. The gain of the array is 24.25 dBi while the suppression of the side lobes is −14 dB. The half power beamwidth of the array is 11.5°. The beam steering is performed which shows a stable side lobe level. The array shows a stable array gain throughout the impedance bandwidth without any beam tilting due to the variations in the frequency. The simulations are performed using both CST Microwave Studio Suite 2015 and Ansys Electromagnetics Suite 17.0 simulation packages.","PeriodicalId":439001,"journal":{"name":"2017 IEEE-APS Topical Conference on Antennas and Propagation in Wireless Communications (APWC)","volume":"69 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2017-09-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"125775927","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"A novel method to improve the omnidirectionality of the dielectric resonator antenna array","authors":"Taolin Liu, Hu Yang, Yan He, Fei Zhao","doi":"10.1109/APWC.2017.8062287","DOIUrl":"https://doi.org/10.1109/APWC.2017.8062287","url":null,"abstract":"A wideband omnidirectional dielectric resonator antenna (DRA) has been proposed. The simulated results show that the reflection coefficient of the DRA is less than −10dB in the frequency band of 1.61GHz-2.92GHz (57.8%), which can cover the 2G/3G/LTE bands simultaneously. In order to improve the omnidirectionality of the DRA array, a novel method to arrange the feeding coaxial cable is proposed. Based on this method, a wideband DRA array with a good omnidirectionality is designed, which gain variation ranges from 0.65dB to 0.97dB over the operating band of 1.7GHz–2.7GHz. Besides, the maximum and minimum gain in the horizontal plane are 9.0dBi (at 2.31GHz) and 6.33dBi (at 1.7GHz), respectively. The proposed antenna in this paper can be a good alternative in wireless communication systems.","PeriodicalId":439001,"journal":{"name":"2017 IEEE-APS Topical Conference on Antennas and Propagation in Wireless Communications (APWC)","volume":"21 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2017-09-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"125918114","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Wireless power transfer system based on magnetic resonant coupling with directional coupler","authors":"Sang-Ho Go, A. Abramowicz","doi":"10.1109/APWC.2017.8062278","DOIUrl":"https://doi.org/10.1109/APWC.2017.8062278","url":null,"abstract":"This paper presents an investigation of a new wireless power transmission (WPT) system based on magnetic resonant coupling with introduced directional or additional coupled inductances. Two coupled resonant circuits reveal two resonant frequencies with highest efficiency of power transfer. It is suggested that a directional coupler or two additional coupled inductances can be used to track these resonant frequencies. According to the observed reflection frequency characteristic the frequency of the PWT system operation can be adjusted. Moreover, the resonant frequency of the transmitter side can be changed assuring high efficiency of the system in a wide range of coupling coefficients i.e. distances between transmitter and receiver.","PeriodicalId":439001,"journal":{"name":"2017 IEEE-APS Topical Conference on Antennas and Propagation in Wireless Communications (APWC)","volume":"242 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2017-09-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"124662575","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Marvin Barahona, D. Betancourt, F. Ellinger, K. Haase, G. Schmidt, A. Hübler
{"title":"Automatic IR UWB chipless RFID system for short range applications","authors":"Marvin Barahona, D. Betancourt, F. Ellinger, K. Haase, G. Schmidt, A. Hübler","doi":"10.1109/APWC.2017.8062300","DOIUrl":"https://doi.org/10.1109/APWC.2017.8062300","url":null,"abstract":"The decoding of ultra-wide band (UWB) chipless radio frequency identification (RFID) tags is often performed extracting its frequency response, by removing the channel contribution. In this paper, an automatic short range (< 50 cm) ultra-wide band (UWB) impulse radio (IR) chipless (RFID) system is proposed. The system is composed of four different coded 5-bits UWB chipless RFID tags fabricated by printing silver ink on a polyethylene terephthalate (PET) substrate, and an impulse radio (IR) UWB radar available commercially. A novel decoding algorithm is implemented to scan the interrogation zone, detect when an UWB chipless RFID tag is placed, and then proceed to identify it without the need of a reference or channel measurement in a line-of-sight, multipath free scenario. The decoding is based on a maximum likelihood (ML) rule to estimate the received UWB chipless RFID tag code embedded in the backscattered pulse. The different UWB chipless RFID tags are successfully decoded automatically, verifying the viability of this methodology.","PeriodicalId":439001,"journal":{"name":"2017 IEEE-APS Topical Conference on Antennas and Propagation in Wireless Communications (APWC)","volume":"132 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2017-09-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"126725103","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
M. Siri, B. Schafer, A. M. Steffen, Abdullah Eroglu, Daniel Rönnow
{"title":"Tunable tapped combline bandpass filters for RFID systems","authors":"M. Siri, B. Schafer, A. M. Steffen, Abdullah Eroglu, Daniel Rönnow","doi":"10.1109/APWC.2017.8062291","DOIUrl":"https://doi.org/10.1109/APWC.2017.8062291","url":null,"abstract":"Design, simulation and measurement results of a tunable planar bandpass filter with a tapped combline topology using diodes as active devices for varactor effect is given. Tunable planar bandpass filter that can operate from 900MHz to 1.6GHz with an enhanced attenuation characteristics are obtained. Diodes are used with an applied bias voltage to have capacitance variation from 0.84 [pF] to 5.08 [pF]. The proposed method eliminates the need for using different active devices and bias voltages and simplifies the geometry that eases implementation. The simulation and measurement results are compared and found in agreement. The method presented in this paper can be integrated in RFID systems to improve the common leakage problem in TX-RX due to poor isolation in circulators.","PeriodicalId":439001,"journal":{"name":"2017 IEEE-APS Topical Conference on Antennas and Propagation in Wireless Communications (APWC)","volume":"51 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2017-09-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"123090892","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}